BOLD MAGENTA part numbers are new for 2025 PARTSCANADA.COM 2025 | SNOW RIDER & SLED ACCESSORIES 152 RAM® HANDLEBAR U-BOLT DOUBLE BALL MOUNTS • Constructed of powdercoated, marine-grade aluminum with zinc-plated U-bolt base, double-socket arm and round base adapter • Accommodates rails from 0.5” to 1.25” in diameter; composite rail adapter can narrow the rail to a minimum width of 0.5” • Designed with a 1” diameter rubber ball and socket system that has adjustment points at both ends of the double-socket arm DESCRIPTION PART # U-bolt mount w/ 2.5” base and 1/4”-20 threaded stud 0603-0914 U-bolt mount w/ round base 0603-0915 DESCRIPTION PART # U-bolt mount w/ diamond base 0603-0916 RAM® MOTORCYCLE HANDLEBAR CLAMP BASE WITH M8 BOLTS •Made of marine-grade aluminum for durability and reliability • Replaces existing bolts with 1” B-size ball; provides shock and vibration damping •Compatible with a wide variety of B-size RAM® double-socket arms and device holders •Will work with any motorcycle that features an 8mm bolt or smaller on its structure • Includes rubber ball, M8x55 bolt, M8x60 bolt and M8x65 bolt (1.25 thread pitch) RAM® HANDLEBAR U-BOLT DOUBLE BALL MOUNTS WITH GOPRO® ADAPTER •High-strength composite and powdercoated marine-grade aluminum • Features a zinc-coated U-bolt base, standard size double-socket arm and 1” rubber ball with custom GoPro® Hero adapter • Designed with a 1” rubber ball and socket system with adjustment points at both ends of the double-socket arm •Includes hardware that will accommodate rails from 0.5” to 1.25” in diameter; composite rail adapter can narrow the rail to a minimum width of 0.5” •Base includes black cover caps to be placed over exposed ends of the U-bolt •The GoPro Hero adapter attaches directly to the underside of the camera, replacing the factory mounting bracket NOTE: GoPro camera and black thumbscrew not included. RAM® TORQUE™ HANDLEBAR AND RAIL MOUNTING BASE FOR PHONES • Features a B-sized 1” rubber ball mounting base that accommodates handlebars 3/4” - 1” in diameter paired with the dynamic X-Grip® for phones •Sizing inserts included to provide a snug fit and offer additional protection for the rail •Low-profile mount utilizes nylon-insert locknuts to secure personal electronics and small accessories to prevent loosening in high-vibration environments • Included spring-loaded, X-Grip cradle has a clean and clever four-leg design that provides great holding power without hiding your phone; X-Grip cradle expands and contracts, allowing for a perfect custom fit •X-Grip also includes a device tether recommended for outdoor applications DESCRIPTION PART # RAM® motorcycle handlebar clamp base w/ M8 bolts 0603-0899 DESCRIPTION PART # U-bolt double ball mount w/ short arm (2.42” L) and camera adapter 0603-0918 U-bolt double ball mount w/ medium arm (3.73” L) and camera adapter 0603-0917 DESCRIPTION PART # RAM® Torque™ handlebar and rail base 0636-0118 •Cradle is compatible with handheld devices that will fit the following dimensions: minimum width of 1.875” with a minimum height of 4.25”; maximum width of 3.25” with a minimum height of 2.25”; depth of 0.875” NOTE: It is important to verify the dimensions of your handheld device with a case/sleeve/ skin when determining the overall size. 0603-0915 0603-0914 0603-0916 0603-0918
RkJQdWJsaXNoZXIy NDI5NTY=