BOLD MAGENTA part numbers are new for 2025 RIDER & SLED ACCESSORIES PARTSCANADA.COM SNOW | 2025 157 DESCRIPTION PART # Clutch/b rake mount w/ X-Grip® holder 0636-0123 RAM® X-GRIP® LARGE PHONE MOUNT WITH BRAKE/CLUTCH RESERVOIR BASE •Includes hardware suitable for mounting to brake or clutch reservoirs, rails between 0.5” and 1.25” in diameter, a double-socket arm, and a universal X-Grip® holder for large phones or phablets. • Designed into the mount is a 1” diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows you to move the X-Grip mount to your optimum viewing position •The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic •The spring-loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your cell phone. •X-Grip also includes a device tether recommended for outdoor applications •Cradle is compatible with handheld devices that will fit the following dimensions: minimum width of 1.75” with a minimum height of 5.5”; maximum width of 4.5” with a minimum height of 3.25”; depth of 0.875” NOTE: It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. DESCRIPTION PART # Medium X-Grip w/ U-bolt base; 1.875” to 3.25”W and 0.5” to 1.25” D 0603-0902 Large X-Grip w/ U-bolt base; 1.75” to 4.5”W, 3.25” to 5.5” H and 0.875” D 0636-0122 U-bolt base only w/ short arm (2.42” L) 0603-0900 RAM® HANDLEBAR RAIL MOUNTS WITH U-BOLT BASE AND UNIVERSAL X-GRIP® FOR LARGE PHONE/PHABLET CRADLE •Consists of a zinc-coated U-bolt base, double-socket arm and universal spring-loaded X-Grip® IV cradle for large phones and phablets •Package includes hardware that will accommodate rails from 0.50” to 1.25” in diameter •Base comes with black cover caps to place over exposed ends of the U-bolt •Included composite rail adapter narrows the rail to a minimum width of 0.5” •Mount is designed with a RAM® B-sized 1” diameter rubber ball and socket system that features adjustment points at both ends of the double-socket arm; allows for almost infinite adjustment and perfect viewing angles •Spring-loaded X-Grip IV cradle expands and contracts, allowing for a perfect custom fit of phone or phablet •X-Grip also includes a device tether recommended for outdoor applications •Cradle is compatible with handheld devices that will fit the following dimensions: minimum width of 1.75” with a minimum height of 5.5”; maximum width of 4.5” with a minimum height of 3.25”; depth of 0.875” • U-Bolt dimensions: 0.50” to 1.25” NOTE: It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. DESCRIPTION PART # RAM® composite double-socket swivel and ratchet arm 0603-0896 RAM® COMPOSITE DOUBLE-SOCKET SWIVEL AND RATCHET ARM • High-strength composite, double-socket swivel and ratchet arm features 360° center rotation and 180° swivel joint • Overall length of 6.25” and a socket-to-socket length of 5.5” •Central pivot point provides unsurpassed adjustability for 1” B-size ball bases, device holders and adapter connected via the sockets •Attaches to any B-size RAM® ball component DESCRIPTION PART # RAM® socket arm 0603-0942 RAM® SOCKET ARM •High-strength composite • Features a long, preassembled extension pole with 1” and 1.5” ball single open sockets • Socket ends swivel 360°, allowing you to rotate the camera adapter in any direction •Pole length (socket end to socket end) is 18” DESCRIPTION PART # Handlebar rail mount with U-bolt base, Level Cup™ drink holder 0636-0129 RAM® HANDLEBAR RAIL MOUNT WITH U-BOLT BASE, LEVEL CUP™ DRINK HOLDER AND KOOZIE • High-strength composite and powdercoated, marine-grade aluminum mount with drink holder designed with two pivot points to keep your drink upright, regardless of conditions • Kit includes a zinc-coated, U-bolt base, double-socket arm and RAM® Level Cup™ Self-Leveling Drink Holder with koozie; base includes black cover caps to be placed over exposed ends of U-bolt •Integrated eyelet and hook provide an optional tethering function to help secure any small or open container • U-bolt accommodates rails from 0.5” to 1.25” in diameter • Fits cans, cups, mugs, etc. ranging from 2.5” to 3.5” diameter • 1” rubber B-size ball 0636-0122
RkJQdWJsaXNoZXIy NDI5NTY=