BOLD MAGENTA part numbers are new for 2025 TOOLS & HARDWARE PARTSCANADA.COM SNOW | 2025 453 DESCRIPTION PART # Gauge and filler P572 Nitrogen needle set 3805-0012 DESCRIPTION PART # Repl. nitrogen needle 3805-0155 NITROGEN SHOCK GAUGE, FILLER AND NEEDLE •300-psi capacity •Regulator and transfer hose required to get nitrogen from tank to nitrogen Shock Gauge and Filler • Bleeder valve and T-handle plunger pin chuck • Swivel chuck has a 12” flexible hose • Instructions, carrying box and Schrader valve extension included (required on some Showa shocks) •Nitrogen needle is used to fill shocks with self-sealing rubber valves (some Yamaha, Fox and Öhlins) •Instructions included •Made in the U.S.A. WARNING: For use by trained professional mechanics only! Improper use could result in great bodily injury or death. DESCRIPTION PART # Shock spring compressor 3805-0137 SHOCK SPRING COMPRESSOR •Safely removes the spring on most coilover shocks •Includes adapters for both clevis- and eyelet-type shocks •Adapter plates adjust to fit spring retaining collars from 56 mm to 96 mm • Innovative, compact, easy-to-use design •Low-friction radial thrust bearing DESCRIPTION PART # Pivot suspension vise 3805-0148 PIVOT SUSPENSION VISE •Designed to make suspension service simple and quick •Holds shocks and forks securely while you change oil, re-valve, or change seals •Pivoting head holds parts in any position, with mechanical stops every 45° • Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a 4-point grip system •Large side holds 39 mm to 69 mm diameter parts •Small side holds 14 mm to 39 mm diameter parts • Steel frame is rigid yet has a small footprint, with four pre-drilled holes in the base for secure mounting to a bench • Movable fluid catch pan with mesh insert, and threaded drain bung •Soft Jaw Fork Peg holds fork slider up for removal of dust seal and seal retaining clip •Repositionable bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassembly and is an excellent platform for adding, adjusting and taking fork oil level measurements •Can be used to assist in removing fork compression valve assembly (use of stock front axle required) •Holds shock firmly around shock body, shaft or shock reservoir •Facilitates removal of piston rod and seal head •Facilitates removal of shock reservoir caps, chamber pistons or bladder •Holds shock to remove spherical bearings or needle bearings •Holds shocks for removal of shock spring P572 3805-0012 DESCRIPTION PART # 10” L spring hook tool 550544 SPRING TOOL •Redesigned for a better grip • Works on hard-to-reach, tight spaces • Easily push, pull and twist springs on and off DESCRIPTION PART # Heavy-duty spring hook MP08-127 DESCRIPTION PART # Mini spring hook 3850-0212 SPRING HOOKS • Used to remove exhaust pipe springs, seat or tank holding springs, cotter pins, sidestand springs and other parts •Mini spring hook tool’s ergonomic handle provides a secure grip at every angle, and compact size provides easy access DESCRIPTION PART # Maxhook™ spring hook 3850-0039 MAXHOOK™ SPRING HOOK •Strong and versatile push-pull spring hook • PVC-coated T-handle provides plenty of leverage for even the most stubborn springs •Hardened steel with CNC-machined tip 3850-0212 MP08-127
RkJQdWJsaXNoZXIy NDI5NTY=