BOLD MAGENTA part numbers are new for 2025 PARTSCANADA.COM 2025 | TIRE & SERVICE STREET TIRES STREET TIRES TIRE FAILURE HAZARD,WHICH IF NOT AVOIDED, COULD RESULT IN DEATH OR SERIOUS INJURY. SEE PAGE 5 FOR IMPORTANT INFORMATION REGARDING PRODUCT USE. WARNING Roadtec 01 Front/Rear Roadtec 01 SE Front/Rear 26 SIZE LOAD/SPEED INDEX TL/TT PART # FRONT BIAS 100/90-16 54H TL 0305-0646 130/90-16 67H TL 0305-0738 100/80-17 52H Tl 0305-0655 110/70-17 54H TL 0305-0582 80/100-18 47P TL 0305-0887 100/90-18 56V TL 0305-0585 90/90-19 52H TL 0305-0656 100/90-19 57V TL 0305-0587 FRONT RADIAL 120/70ZR17 (58W) TL 0301-0878 REAR BIAS 150/80-16 71H TL 0306-0741 SIZE LOAD/SPEED INDEX TL/TT PART # REAR BIAS (CONT) 130/70-17 62H TL 0306-0617 140/70-17 66H TL 0306-0623 140/80-17 69V TL 0306-0668 150/70-17 69V TL 0306-0669 90/90-18 51P TL 0306-0858 4.00-18 64V TL 0306-0622 120/80-18 62H TL 0306-0670 REAR RADIAL 120/70ZR17 (HWM) (58W) TL 0301-0604 180/55ZR17 (HWM) (73W) TL 0302-1005 190/50ZR17 (HWM) (73W) TL 0302-1095 190/55ZR17 (HWM) (75W) TL 0302-1007 ROADTEC 01 • Increased grip on wet roads, with a focus on low-friction surfaces (such as city streets and worn tarmac, low temperature), thanks to radial positioning of grooves •Rebalanced tire stiffness to allow a better adherence of the rubber to the tarmac micro-asperities, increasing mechanical grip even on lower-friction surfaces •Belt and carcass tension parameters upgraded to increase stability on rear tires during strong braking • Increased mileage vs. Roadtec Z8 Interact (up to 10%), thanks to a different footprint shape (larger and shorter) which also enhances motorcycle handling • Higher wear resistance, obtained through a revised land/sea ratio on the rear tire in conjunction with the new tread design, ensures product performance consistency, allowing users to enjoy the tire for its entire service life • Metzeler multi-compound rear on selected sizes, with increased harmonization between the different compounds •HWM (Heavy Weight Motorcycles) special version available to improve performance on motorcycles requiring them (see Metzeler website for details) • Blackwall •Tubeless (TL) SIZE LOAD/SPEED INDEX TL/TT PART # FRONT 120/70ZR17 (58W) TL 0301-0863 110/80R19 59V TL 0301-0958 120/70ZR19 60W TL 0301-0959 REAR 150/70R17 69V TL 0302-1668 SIZE LOAD/SPEED INDEX TL/TT PART # REAR (CONT) 160/60ZR17 (69W) TL 0302-1476 170/60ZR17 72W TL 0302-1669 180/55ZR17 (73W) TL 0302-1477 190/50ZR17 (73W) TL 0302-1478 190/55ZR17 (75W) TL 0302-1479 ROADTEC 01 SE •Consolidating the strengths of the ROADTEC 01 – with its exceptional performance in wet conditions and high mileage – and enhancing the sporty characteristics in terms of the grip and agility needed by supersport, naked and sport-touring riders •To meet sports requirements that imply high performance at sharp lean angles, the tread design for the ROADTEC 01 SE builds on that of the ROADTEC 01, with an evolution towards a tire with a slicker shoulder, optimizing drive with a greater surface area coming into contact with the asphalt •Front tires inherit the latest version of the full-silica compound used for the ROADTEC 01 and feature the same tread pattern in the middle section, a key aspect of its exceptional grip on low-friction surfaces; shoulders are slicker, and the relative structural refinement optimizes performance through half and full lean, improving agility and steering stability • Rear tires use a bi-compound and, as with the front, feature a sportier evolution of the ROADTEC™ 01 tread pattern, aimed at offering greater drive at sharper lean angles together with comfort and driving pleasure capable of satisfying even the most demanding riders, both on long routes and winding roads • Blackwall •Tubeless (TL) • P-rated for speeds up to 150 km/h (93 mph), H-rated for speeds up to 210 km/h (130 mph),V-rated for speeds up to 240 km/h (149 mph) or (W)-rated for speeds of 270+ km/h (168+ mph) • V-rated for speeds up to 240 km/h (149 mph),W-rated for speeds up to 270 km/h (168 mph) or (W)-rated for speeds of 270+ km/h (168+ mph)
RkJQdWJsaXNoZXIy NDI5NTY=