BOLD MAGENTA part numbers are new for 2025 SERVICE & MAINTENANCE TOOLS PARTSCANADA.COM TIRE & SERVICE | 2025 SERVICE & MAINTENANCE TOOLS 331 DESCRIPTION PART # Optimate Pro-4 Duo charger 3807-0719 OPTIMATE™ PRO-4 DUO •Activate or prepare new batteries within one hour (60’), including Pb (lead-acid, dry-charged AGM) with separate acid pack, factory-activated Pb (AGM & GEL), and LFP lithium delivered in sleep mode or requiring a top-up charge •Automatically save any type of deeply discharged battery from as low as 0.5V; For LFP lithium, manually reset the protective BMS and save from zero •Use the automatic diagnostic charger for 4x 12V Pb lead-acid (STD,AGM, GEL) and/or 12.8V LFP lithium (LiFePO4 / Lithium Ferrous Phosphate) batteries •Test during chrging to confirm if the battery is safely recoverable, followed by a state of health (S.O.H.) test to confirm if the battery is serviceable. • Utilize 4 fully independent 5 Amp charging stations/banks, each with 3 selectable modes to service new and used powersport batteries DESCRIPTION PART # OptiMate™ 4 quad program 3807-0675 DESCRIPTION PART # OptiMate 4 quad premium program 3807-0676 OPTIMATE™ 4 QUAD PROGRAMER • Charger, tester and power supply for 12V lead-acid and 12.8V lithium batteries •OptiMate™ 4 Dual Program tests before & after charging and can recover a ‘dead-flat’ battery from as low as 0.5 volts •Safe low voltage pulse desulphation • Continuous charging if healthy, stops and warns if faulty •Provides 24/7 protection by preventing discharge from connected circuitry and guarantees more battery power •Tests battery state of health •Fully sealed case to protect against spillage and light rain •Rated for use down to -40 °C/-40 °F NOTE: Part #3807-0676 includes the O-19 cable accessory 3807-0675 3807-0676 •Each bank is delivered with a replaceable output cord and fused battery clip set; the AC power cord is replaceable/exchangeable •Conduct a state of health test for good (80% to 100%), ok (60% to 80%), or bad (below 60%) batteries •Maintain 24/7 OptiMate™ maintenance to keep the battery at 100% until ready to be used • For lithium batteries, use the push-button battery management system (BMS) reset
RkJQdWJsaXNoZXIy NDI5NTY=