BOLD MAGENTA part numbers are new for 2025 PARTSCANADA.COM 2025 | TIRE & SERVICE SERVICE & MAINTENANCE TOOLS SERVICE & MAINTENANCE TOOLS STUDDING TEMPLATES •Stud patterns on Woody’s® templates are CAD-designed to maintain track balance •Follow the instructions and you will have the highest level of precision stud placement •Printed on laminated heavy card stock TRACK TENSION TOOL •Make sure the track’s tension is within the manufacturer’s guidelines STEEL STUD SHARPENING TOOLS •Easy to use – just put the tool into a 3/8” drill chuck and sharpen studs while they’re on the sled • Available in 30°, 45° and 60° angles TRACK MARKER •White dots from marker facilitate hole placement •An easy way to see how your pattern is developing •Use the track marker and a template to plan the layout of any stud pattern SHALLOW SOCKET TOOL •A unique tool used for driving locknuts down on push-through studs •Provides the torque to tighten without touching the surface of the support plate •Will not scuff finish of colored support plates •Available in 5/16” size UNIVERSAL TRACK HOLE DRILL •Perfect every time – makes studding easy •Hollow drill for 7 mm or 5/16” studs makes a precise opening for installing studs • For 7 mm T-nut studs and 5/16” push-through studs use 7 mm drill INDEXING TOOL FOR SUPPORT PLATES •Real time-saver •Fits on a standard 3/8” drive ratchet •Holds support plates while stud-securing nut is tightened TRACK SAVER TOOL •Invaluable for removing or installing dished T-nuts •Snaps onto any 3/8” drive ratchet DESCRIPTION TRACK PITCH TRACK LENGTH TRACK WIDTH TRACK PLY PART # Template for single-ply tracks with 2.52 pitch in sizes 14”/15” x 128”. Stud patterns of 102 & 153 2.52 128” 14”/15” Single 3820-0010 Template for 3.0 pitch single-ply track. Length 141”. Stud patterns of 94 and 141 3.00 141” 15” Single 3820-0011 Template for two-ply tracks with 2.86 pitch that are 15”/16” wide by 120”/1 29”/137”/146”/154” long. Several studding quantities & patterns 2.86 120”/129”/137”/ 146”/154” 15”/16” 2 ply 3820-0035 Template for single-ply tracks with 2.86 pitch in sizes 15”/16” wide by 120”/1 37” long. Stud patterns of 84, 96, 126, & 144 2.86 120”/137” 15”/16” Single 3820-0033 Template for two-ply tracks with 2.86 pitch in sizes 15” x 129”/137”. Stud patterns of 90, 96, 135, & 144 2.86 129”/137” 15” 2 ply 3820-0021 Template for two-ply tracks with 2.52 pitch. Stud patterns of 96, 102, 108, 114, 120, 135, 144, 153, 162, 171, 187, 192, & 198 2.52 121”/128”/ 136”/144” 13.5”/14”/15”/16” 2 ply 3820-0034 DESCRIPTION PART # Track tension tool 3820-0005 ANGLE PART # 30° TOOL-SHARP3 ANGLE PART # 60° TOOL-SHARP6 DESCRIPTION PART # Track marker TRAK-MARK DESCRIPTION PART # Shallow socket tool SCW-4505 DESCRIPTION PART # Track hole drill 3820-0015 DESCRIPTION STUD SIZE PART # For square backer plates 5/16” SPI-TOOL-5 DESCRIPTION PART # Track saver tool 550739 3820-0035 3820-0010 TOOL-SHARP3 384
RkJQdWJsaXNoZXIy NDI5NTY=