BOLD MAGENTA part numbers are new for 2025 PARTSCANADA.COM 2025 | TIRE & SERVICE V-TWIN TOOLS 408 PART # DESCRIPTION 3801-0084 For 03-10 Twin Cam engines PART # DESCRIPTION 3801-0108 Repl. sleeve kit TIMKEN® CASE BEARING TOOL • For building big-cubic-inch, late-model Twin Cam engines •Can also be used to replace bearings for stock 88” or 96” engines utilizing the JIMS precision insert •Easily and accurately converts the left-side crankshaft roller bearing (OEM #24604-00D) to the more durable Timken® bearing (OEM #9028) •Sleeve is several times stronger than stock aluminum case material that standard bearings ride in •Included in kit is one new steel bearing insert sleeve (held to under 0.0002” total indicator reading), all necessary drill bits to drill oil feed and return holes, press plate that holds bearing sleeve insert in line with case bearing bore at time of installation, all necessary hardware and instructions • Requires normal hand tools, hand drill and two-ton press •Timken bearing not included; see PART #0924-0108 • Replacement Timken sleeve kit available separately •Made in the U.S.A. PART # DESCRIPTION 3801-0062 For 06 Dyna and all 07-17 Twin Cam CASE SPLITTER TOOL • ”Breaks” the case sealant by pushing apart both case halves •Bolts to primary mounting holes •Uses included hand thread-in pushing screw •Flywheels will be pushed from the left case •Made in the U.S.A. PART # DESCRIPTION DS-196212 For 66-99 Big Twin cylinders, 3.4375” to 4” bore w/ stock bolt pattern CYLINDER TORQUE PLATES •Torque plates must be used when boring or honing late-model aluminum cylinders •Simulate running stress conditions •Instructions included •Made in the U.S.A. PART # DESCRIPTION 3801-0012 For 03-17 Twin Cam “A” and “B” motors CRANKCASE BEARING REMOVER AND INSTALLER •For use on pinion and sprocket side main case bearings on 03-17 Twin Cam “A” motors •Also works on sprocket side main case bearing on 03-17 Twin Cam “B” motors •Made in the U.S.A. 3801-0084
RkJQdWJsaXNoZXIy NDI5NTY=