BOLD MAGENTA part numbers are new for 2025 PARTSCANADA.COM 2025 | TIRE & SERVICE V-TWIN TOOLS 418 PART # DESCRIPTION DS-198635 For all 70-06 Big Twin and 86-22 XL models PRIMARY DRIVE LOCKING TOOL •Used to lock primary for service work •Fits between the chain and motor sprocket •Works on all primaries •Made out of black Delrin® •Made in the U.S.A. PART # DESCRIPTION 3802-0026 For 06-17 Dyna, 07-17 Softail 3801-0107 For 07-16 FLHT/FLHR/FLHX/FLTR 3802-0069 For 04-22 XL1200 PRIMARY LOCKING BARS •Locks primary for service work •Made in the U.S.A. PART # DESCRIPTION DS-197082 For 99-17 Twin Cam, 80-99 Big Twin w/ rear belt drive PULLEY LOCKER •Lock your transmission pulley for removing or installing pulley nut •Made in the U.S.A. CLUTCH LOCK-UP TOOL •For use on all BDL belt drive units that have the BDL round clutch dogs •Designed to help properly torque the clutch basket and hub assembly to the mainshaft of the transmission •No need to use an impact wrench that can damage the basket, hub or other components •Made in the U.S.A. PART # DESCRIPTION DS-197026 For 90-97 Big Twin and 91-22 XL (except RH Sportster); repl. OEM #38515 CLUTCH SPRING COMPRESSION TOOL •For removal of clutch spring and plates •Offers easy access to spring retaining ring PART # DESCRIPTION DS-197061 Spring compressor nut for 91-03 XL and Buell CLUTCH SPRING COMPRESSOR NUT •Used to release clutch spring so retainer ring can be easily removed and installed •Must be used in conjunction with compressor tool JIMS tool PART NO. 38515-90 (available separately) •Made in the U.S.A. PART # DESCRIPTION 3802-0029 For 06 Dyna and all 07-21 Big Twin DS-196149 For 36-06 Big Twin (except 06 Dyna) TRANSMISSION SPROCKET LOCKNUT WRENCHES •Inner collar will retain wrench to nut for safer work •Removes hex nut from end of main drive gear that secures the rear drive transmission pulley •Extra-long two-piece design •Made in the U.S.A. PART # DESCRIPTION 3802-0004 For 57-90 XL PRIMARY COVER INSPECTION PLUG TOOL •Use this tool to remove and install primary inspection plug •Made in the U.S.A. PART # DESCRIPTION 3802-0059 For 85-20 Big Twin INNER PRIMARY BEARING AND SEAL REMOVAL/ INSTALLATION TOOL •Provides precise installation and eliminates the cumbersome task of performing the installation in a press •Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts •Made in the U.S.A. PART # DESCRIPTION 3803-0114 Clutch lock-up tool 3802-0026 DS-196149
RkJQdWJsaXNoZXIy NDI5NTY=