BOLD MAGENTA part numbers are new for 2025 V-TWIN TOOLS PARTSCANADA.COM TIRE & SERVICE | 2025 419 PART # DESCRIPTION 3802-0063 For 85-06 5-speed Big Twin and aftermarket 6-speeds 5-SPEED MAIN CASE SEAL INSTALLER TOOL • Ensures correct alignment, seal protection and depth when installing the seal •Made in the U.S.A. PART # DESCRIPTION 3802-0042 For 06 Dyna, 07-20 Big Twin CRUISE DRIVE 6-SPEED MAIN DRIVE GEAR REMOVER TOOL •Removes main drive gear from main bearing correctly while in transmission case •Eliminates need for arbor press and risk of case damage •Made in the U.S.A. PART # DESCRIPTION 3801-0175 For all 06-20 6-speed models w/ Cruise Drive CRUISE DRIVE MAIN CASE SEAL INSTALLER •Developed to specifically work with H-D’s 6-speed transmission bearings •Driver style seal installer installs main seal to correct depth without applying any stress to bearings or seals, and won’t damage bearings, unlike a pushing or pull type of installer •Made in the U.S.A. PART # DESCRIPTION 3803-0116 Clutch adjuster nut tool CLUTCH ADJUSTER NUT TOOL •Use this tool for adjusting clutches on all Harley-Davidson models with an 11/16” clutch adjuster lock nut •Deep socket allows tool to recess into clutch basket and can be driven with 11/16” combination wrench or adjustable wrench •Through-hole allows access with hex wrench to hold clutch adjuster screw while simultaneously tightening the adjuster lock nut •Compact design fits easily in a saddlebag or tool wrap PART # DESCRIPTION 1605-1270 Scorpion clutch hub puller SCORPION CLUTCH HUB PULLER •Anodized billet aluminum with a threaded steel insert for the puller bolt •Used on all Scorpion clutches except PART #DS-223468 •Made in the U.S.A. PART # DESCRIPTION DS-196158 For 36-90 Big Twin CLUTCH HUB PULLER •Used to remove wet and dry clutch hubs without removing clutch release rod •Made in the U.S.A. PART # DESCRIPTION DS-196061 For 36-E84 Big Twin CLUTCH HUB PULLER •Remove the hub without removing the transmission end cover on Big Twin models •It may be used on L84-90 hubs by enlarging a few puller holes PART # DESCRIPTION 3802-0064 For all 85-20 Big Twins w/ mechanical clutch ULTIMATE CLUTCH ADJUSTING TOOL •Allows quick and accurate tightening of the clutch adjusting screw jam nut without having the screw change position •Includes the proper hex key Allen wrench, which conveniently stores in the tool handle •Made in the U.S.A.
RkJQdWJsaXNoZXIy NDI5NTY=