BOLD MAGENTA part numbers are new for 2025 PARTSCANADA.COM 2025 | TIRE & SERVICE CHEMICALS & LUBRICANTS CHEMICALS & LUBRICANTS 480 LM 508 ANTI-SEIZE COMPOUND •Copper-colored release agent and lubricant for machine elements which are subjected to high thermal stress •Makes dismantling easy after long running times •Outstanding thermal resistance •Resistant to acceleration forces •Outstandingly adherent • Resistant to hot water, salt water and splash water •Long-term corrosion protection •Prevents brake noise •Protects from welding and seizing •100 g tubes come 12 per case; sold each LM 48 INSTALLATION PASTE •High performance MoS2 paste for extreme demands •Prevents run-in damage and seizing marks when working on bearings and sliding guides, when pressing bolts and bearing bushings and when pulling on roller bearing rings • ”For-life” lubrication of joints and small components •Service temperature of -31 to 842 °F (-35 to 450 °C) •Outstandingly adherent •High wear resistance •Good corrosion protection and low coefficient of friction •Highly economical •Available in 50 g tube; sold each DESCRIPTION PART # 100 g 3701-0007 DESCRIPTION PART # 50 g 3607-0041 LM 50 LITHO HT • Work-stable, water-resistant, oxidation- and corrosion-resistant, high-performance, lithium-complex soap grease •Ensures a very high standard of wear protection and a high load-carrying capacity •Broad operating temperature range •Friction and wear-reducing •Good corrosion protection •400 g cartridges come 12 per case; sold each FORK OIL •Formulated for cartridge and damper rod forks •Excellent lubrication for radically reduced friction – essential for forks with large sweep areas •Ultra-low foaming with a broad temperature range for stable viscosity and negligible fading under the hardest use •Use #5 for cartridge forks •#10 for use in cartridge or conventional damper-rod forks •PART #3906-0110 viscosity rating 19 cSt at 40°C, PART #3609-0069 viscosity rating at 20 cSt at 40°C and PART #3609-0040 viscosity rating 40 cSt at 40°C • PART #s 3609-0069, 3609-0040 are 1-liter plastic bottles, 12 per case • PART #3609-0110 are 4-liter plastic bottles, 4 per case ROAD AND TRACK FORK OIL • High-performance fork oil specially developed for the Road and Track forks • Stable viscosity and negligible fade, even under hard use •Designed to minimize friction and wear on fork internals for longer service intervals •PART #OH01309-01 viscosity rating 19 cSt at 40°C • PART #OH01309-01 is a 1-liter plastic bottle, 12 per case SHOCK OIL •Öhlins shock absorber fluid has a viscosity rating of 28 cSt (centistoke) at 40°C •The high cSt rating means Öhlins shock fluid won’t thin out as heat increases •The result is negligible fade – even under the most demanding riding conditions •Available in 1 liter bottles, 12 per case TAP •Tap for 20 L bottles/jugs of Liqui Moly oils and lubricants DESCRIPTION PART # 400 g 3607-0042 DESCRIPTION PART # #5 (4L) (Similar SAE 7.5W), 4 L cs. 3609-0110 #5 (1L) (Similar SAE 7.5W), 1 L, cs. 3609-0069 DESCRIPTION PART # #10 (1L) (Similar SAE 20W), 1 L cs. 3609-0040 Road and Track fork oil (1L) (Similar SAE 7.5W), 1 liter, cs. OH01309-01 DESCRIPTION PART # 1 L, cs. OH00105-01 DESCRIPTION PART # 20 L tap 3850-0380 3609-0110 3609-0040
RkJQdWJsaXNoZXIy NDI5NTY=