FEBRUARY 2023 FEATURED PRODUCTS KODLIN FASTBACK RISERS 6”, 8”, 10“ FOR M8 SOFTAIL WITH DIGITAL SPEEDO • Handlebar risers • Available in 6”, 8” and 10” • CNC machined from billet aluminum • Black anodized finish • 1” bar clamp size • Stainless hardware and zip ties included • Fits all 2018-up M8 Softail models with HD digital gauges (i.e. Street Bob, Lowrider ST) DESCRIPTION PART NO. Fastback risers, 6” 0602-1424 Fastback risers, 8” 0602-1425 Fastback risers, 10” 0602-1426 DESCRIPTION PART NO. Lift Kit / Shock Extension for M-8 Softails 1304-1094 DESCRIPTION PART NO. Neowise Bullet Smooth 2-1 LED Turn Signal for Lowrider ST 2020-2134 DESCRIPTION PART NO. Kodlin M8 Softail Shock / Spring Compression Tool 3805-0226 6” RISER 8” RISER 10” RISER LIFT KIT / SHOCK EXTENSION FOR M-8 SOFTAILS (MODEL SPECIFIC) • Made for OEM M8 ‘extended shock’ and extends shock mounting points by 15 mm. Max lift without hitting the swingarm • Easy installation, requires a spring compression tool (i.e. Kodlin 3805-0226) • Includes pre-installed new bearings • No addtional modifications to the shock • Includes installation instructions • Fits all 2022 Low Rider S, 2022 Low Rider ST and 2018-2022 Fat Bob and Heritage M8 Softail models KODLIN M8 SOFTAIL SHOCK / SPRING COMPRESSION TOOL For easy removal and install of the shock absorber spring and installation of Kodlin Lowering Kits 1304-1023, 1304-1024, as well as our Lift Kits / Shock Extensions 1304-1083 and 1304-1094. NEOWISE BULLET SMOOTH 2-1 LED TURN SIGNAL FOR LOWRIDER ST • 2-1 White Run Light and Full Contrast Amber Front Turn Signal. Super small, amazingly bright with smoked lenses • Engineered in Germany with SMD-LED technology • Includes mounting brackets and connectors for a plug and play installation • Some applications may require the use of a load equalizer • Sold in pairs, black finish! • Direct fit for M8 Softail Lowrider ST FXLRST 2022-up
FEBRUARY 2023 FEATURED PRODUCTS DESCRIPTION PART NO. Kodlin Rear LED Wiring Harness for Sportster S models 2021-up 2050-0481 KODLIN REAR LED WIRING HARNESS FOR SPORTSTER S MODELS 2021-UP • Allows plug and play installation of Kodlin 3-1 Rear Lightbar and provides a voltage source for the Kodlin License Plate Kit for Sportster S • Save install time, no need to create a harness from scratch • Eliminates need to cut into OEM harness • No additional wiring required • Includes installation instructions • Fits 2021-up Sportster S SOLO SEATS FOR KODLIN M8 SOFTAIL SHEETMETAL PRODUCTS • Designed to complement the lines of the Kodlin M8 Softail gas tank and wide rear fender • Handcrafted in California from premium quality leather • Adds the perfect finish to the M8 Softail Custom project • Black finish, sold each • Made in the U.S.A. PART NO. DESCRIPTION 0802-1466 For 18-22 FLFB/FLFBS with Kodlin rear fender PART #1401-0744 and OEM gas tank 0802-1467 For 18-20 FXBR/FXBRS with Kodlin rear fender PART #1401-0744 and OEM gas tank 0806-0116 For 18-20 FXBR/FXBRS, 18-22 FLFB/FLFBS w/ Kodlin rear fender PART #1401-0744 and Kodlin gas tank PART #0701-0952 0806-0116 0802-1467 0802-1466 BELT GUARD • Made of steel with black powdercoat finish • New stainless steel hardware included • Very easy installation • Made in the U.S.A. PART NO. DESCRIPTION 1202-0167 For 21-22 RH1250S/Sportster S
FEBRUARY 2023 FEATURED PRODUCTS BATES-STYLE HEADLIGHT BRACKETS • Steel bracket with black powdercoated finish • Converts your LED headlight to fit a Bates-style 53/ 4” bottom mount headlight • Sold each; headlight sold separately • Made in the U.S.A. PART NO. DESCRIPTION 2001-2509 For 18-20 FXBR/FXBRS 2001-2592 For 21-22 Sportster S/RH 1250S 2001-2592 2001-2509 SLEEK LIGHTS 3-1 • Super-bright German-engineered COB LEDs with run, turn and brake function • Housing made from CNC-machined billet aluminum with black or chrome finish • Replace rubber antenna grommets when factory antenna is relocated or removed • Come with all necessary hardware for installation • Sold in pairs NOTE: We recommend the use of the Kodlin Curved Touring License Plate Kit PART #20302160 (black) or PART #2030-2161 (chrome) (check license plate fitment applications). PART NO. DESCRIPTION FOR 06-22 FLHX/FLHXS, 09-22 FLTRX/F LRTXS AND FLHRXS 17-22 2040-2912 Black 2040-2913 Chrome 2040-2912 2040-2913 ELYPSE 3-1 REAR LIGHT BAR • Super small, amazingly bright run, turn, brake light bars with smoked lenses • Engineered in Germany with SMD-LED technology • The housing is CNC-machined from billet aluminum, black finish •The use of a load equalizer might be necessary •Sold each; all hardware included PART NO. DESCRIPTION 2040-2915 For 21-22 Sportster S/RH 1250S ELYPSE LED TURN SIGNALS • Super small, amazingly bright amber turn signal with smoked lenses • Engineered in Germany with SMD-LED technology • Specifically designed to replace the bulky stock turn signals • Come in black or chromed housings • Some applications may require the use of a load equalizer • To add the running light function to the Kodlin turn signals (dualfunction), we suggest using Badlands PART #2050-0189 (sold separately) • Sold in pairs and use the stock bracket for installation PART NO. DESCRIPTION FOR 15-22 FLTRK/FLTRKSE/FLTRX/FLTRXS/FLTRXSE/FLTRXST AND 22 FXLR/FXLRS 2020-1925 Black 2020-1926 Chrome 2020-1926 2020-1925
FEBRUARY 2023 FEATURED PRODUCTS ELYPSE 2-1 TURN SIGNALS • Super small, amazingly bright 2-1 turn signals with smoked lenses • Includes white running and full-contrast amber turn function • Engineered in Germany with SMD-LED technology • The housing is CNC-machined from billet aluminum, black finish • The use of a load equalizer might be necessary • Sold in pairs, necessary hardware included ELYPSE LED 2-1 TURN SIGNALS • White run light and full-contrast amber turn signal • Super small, amazingly bright amber turn signal with smoked lenses • Engineered in Germany with SMD-LED technology • The housing is CNC-machined from billet aluminum and available in black or chrome finish • Some applications may require the use of a load equalizer • Sold in pairs LEGIT ELYPSE LED TURN SIGNALS • Small but extremely bright amber turn signal with German engineered SMD-LED technology and smoked lenses • The covers are CNC-machined from billet aluminum • Some applications may require the use of a load equalizer • To add the running light function to the Kodlin turn signals (dualfunction), we suggest using Badlands PART #2050-0189 (sold separately) • Sold in pairs PART NO. DESCRIPTION 2040-2914 For 21-22 Sportster S/RH 1250S PART NO. DESCRIPTION FOR 18-22 SOFTAIL MODELS (MAY FIT OTHER CABLE OPERATED CLUTCH MODELS BY ADDING SPACER) 2040-2916 Black 2040-2917 Chrome UNIVERSAL FIT 2040-2918 Black 2040-2919 Chrome PART NO. DESCRIPTION FOR 06-22 FLHT/FLHX/FLTR MODELS 2040-2911 Black 2020-1927 Black contrast cut 2020-1928 Chrome 2040-2916 2040-2919 2040-2911 2020-1927 2020-1928 2040-2918 NEOWISE 3-1 BULLET REAR INDICATORS • Amazingly small and super bright 3-1 (Run-Turn-Brake) rear indicators • Engineered in Germany with SMD-LED technology • Tinted glass with 11mm/0.4" diameter • Black or chrome grooved die-cast housing with 8mm (M8) x 15/16” studs • Some applications may require the use of a load equalizer • Universal fit, sold in pairs • For custom use on 12V applications • For use on HD Softail, Dyna and Sportster fender struts we recommend using Kodlin Turn Signal Adapters PART #s 2020-1923 or 2020-1924. PART NO. DESCRIPTION GROOVED 2020-1929 Black 2020-1930 Chrome PART NO. DESCRIPTION SMOOTH 2020-1931 Black 2020-1932 Chrome 2020-1932 2020-1929
FEBRUARY 2023 FEATURED PRODUCTS NEOWISE 3-1 MINI FENDER STRUT INDICATORS • Tiny but incredibly bright 3-1 (Run-Turn-Brake) rear indicators • Engineered in Germany with SMD-LED technology • Tinted glass with 11mm/0.4" diameter • Black or chrome die-cast housing with necessary hardware for installation • Direct-fit for H-D fender struts on most 18-22 Softail models • Older Sportsters, Dynas and Softails may require minor strut modifications to fit • Some applications may require the use of a load equalizer • Sold in pairs PART NO. DESCRIPTION 2020-1933 Black 2020-1934 Chrome 2020-1933 2020-1934 REAR TURN SIGNAL ADAPTOR/COVER PLATES • CNC-machined from billet aluminum • Chrome or black finish • Covers the two holes (1 round, 1 oval) left after removal of the stock fender strut-mounted turn signals • Compatible with all Kodlin LED indicators, or any aftermarket lights with 8mm mounting studs • Sold in pairs NOTE: Older Sportster, Dyna and Softail models may require minor modifications to the strut to fit. PART NO. DESCRIPTION FOR 18-22 SOFTAIL MODELS 2020-1923 Black 2020-1924 Chrome 2020-1924 2020-1923 LOWER RISERS • Stylish must, especially when doing a handlebar conversion due to the stock pullback riser • Constructed of forged aluminum • Work with stock upper clamp and speedometer housing • Risers are approx. 1.25" from bottom of riser at tree mount surface to bottom of handlebar • Easy installation • Sold in pairs PART NO. DESCRIPTION FOR 18-20 FXBR/FXBRS 0602-1152 Black 0602-1153 Chrome 0602-1152 0602-1153 TRACKBOARDS BRAKE PEDAL PAD • CNC-machined billet aluminum brake pedal pad • Lightweight design, black anodized with “K” logo • Dimensions: 3.25” L x 5” W x 0.75” thick • Matching floorboards, shifter pegs and passenger pegs/m ini boards are available to complete the look • Sold each PART NO. DESCRIPTION 1610-0652 For 99-22 FLT/FLHT/FLHR/FLHX/FLTR/FLTRU and H-D FL Trike STEEL FRONT CHIN SPOILER • Bolt-on chin spoiler adds that aggressive look to your Softail • Made from steel including a stainless steel mesh glue-on grille • Hides the oil cooler and voltage regulator • Raw finish • Made in the U.S.A. PART NO. DESCRIPTION 0504-0376 For 18-22 Softail models (except FXDR)
FEBRUARY 2023 FEATURED PRODUCTS PART NO. DESCRIPTION 0701-0952 For 18-22 Softail models STRETCHED GAS TANK • Stretched gas tank comes in raw steel, unpainted. It includes a pop-up gas cap and works with the OEM fuel pump • We recommend the use of a tank sealer prior to installation • The tank has a capacity of approximately 3.5 gallon (13 liter) and comes with installation instructions and hardware NOTE: When used on Softail models with a dash, modifications are necessary to relocate/replace the dash. Stock seats do not work with our stretched gas tanks. FRONT END COVERS • Machined from 6061 billet aluminum with a bolt black finish • Cover features six stainless steel Allen-head screws • Includes all necessary items for any easy installation • Sold in pairs PART NO. DESCRIPTION 0411-0183 For 18-20 FXBR/FXBRS LOWERING KITS • Lowers the bike up to 1.5” (40mm) • Includes pre-installed new bearings • Includes installation instructions; PART #1304-1024 includes all additional hardware • Requires the use of a shock compression tool PART #3805-0226 (sold separately) PART NO. DESCRIPTION 1304-1023 For 18-22 FLHC/FLHCS/FLFB/FLFB/FXFB/FXFBS, 18-21 FLSB/ FXBS, 18-20 FXBR/F XBRS, 19-20 FXDR, 20-22 FXLRS/FXLRST and 18-19 FLDE models w/ remote pre-load adjuster 1304-1024 For 18-22 FXBB/FXBBS, 18-20 FXLR, 18-21 FLSL, 21-22 FXST and 20 FLDE models w/o remote pre-load adjuster 1304-1024 1304-1023
FEBRUARY 2023 FEATURED PRODUCTS LOWERING KIT • Lowers the height of your Sportster S by 1“ (25mm) • Made of steel with a black powdercoated finish • Easy installation which doesn’t require a modification to your suspension; no shock compression tool is required • Comes with installation instructions • Made in the U.S.A. PART NO. DESCRIPTION 1304-1084 For 21-22 RH1250 S Sportster S AFTER LOWERING KITS • Made of steel with a black powdercoated finish • Easy installation which doesn’t require a modification to your suspension • No shock compression tool is required • Comes with installation instructions • Made in the U.S.A. NOTE: Operation of centerstand can only be done by 2 people after the installation of the 2” lowering kit. Caution when operating the kickstand is required. PART NO. DESCRIPTION FOR 21-22 RA1250/1250S PAN AMERICA 1304-1088 2” lowering kit 1304-1089 1” lowering kit 1304-1089 1304-1088 LIFT KIT/SHOCK EXTENSION FOR M-EIGHT SOFTAILS • Lifts bike up to 1" • Includes new pre-installed bearings • No additional shock modifications required • Installs easily using a spring compression tool PART #38050226 (sold separately) • Installation instructions included PART NO. DESCRIPTION 1304-1083 For 18-22 FLFB/FLFBSFXBB/FXBBS, 18-21 FLSB/FLSL,20-22 FXST, 18-20 FXLR and 18-20 FLDE LIFT KIT/SHOCK EXTENSION • Increases the height of your Sportster S by 1“ (25mm) for that extra ground clearance • Made of steel with a black powdercoated finish • Easy installation which doesn’t require a modification to your suspension; no shock compression tool is required • Comes with installation instructions PART NO. DESCRIPTION 1304-1085 For 21-22 RH1250 S Sportster S AFTER
FEBRUARY 2023 FEATURED PRODUCTS 21" FRONT FENDER • One-piece raw fender is made of steel • Painter friendly – no filling necessary • Designed for 21" front wheels • We recommend using 4 x 5/16 washers for installation PART NO. DESCRIPTION 1401-0745 For 13-17 FXSB/FXBSE, 18-20 FXBR/FXBRS models WIDE REAR FENDER • Fits the wide M8 Softail frame for 240/2 50 rear tires • State of the art quality, bolts right on to the frame • No modifications to the frame required • Check fitment prior to painting • Comes in raw steel, unpainted • TÜV approved for superior quality NOTE: Stock seats do not work with Kodlin fenders. Please check our seat selection for specific applications that were designed to match your bike and to work with stock tanks or the Kodlin M8 Softail Custom Tank. CURVED LED LICENSE PLATE KIT • Curved horizontal motorcycle license plate kit • Frame is low profile aluminum construction • Very bright white LEDs • Frame dimensions: 73/ 16” L x 41/ 4” W; mounting hardware included • Great addition to Kodlin Sleek 3-1 Rear Indicators • Available in black or chrome finish CURVED UNIVERSAL LED LICENSE PLATE KIT • Curved horizontal motorcycle license plate kit • Frame is low profile aluminum construction • Very bright white LED’s • Frame dimensions: 73/ 16” length x 41/ 4”width • Available in black or chrome finish • For use with Kodlin license plate bracket PART #2030-2164 for 21-22 Sportster S models or PART #2030-2165 18-22 Softail models (sold separately) PART NO. DESCRIPTION 1401-0744 For 18-22 FLFB/FLFBS/FXBR/FXBRS models PART NO. DESCRIPTION FOR 13-22 FLHX/FLHXS, 13-22 FLTRX/FLTRXS, 17-22 FLHRXS 2030-2160 Black 2030-2161 Chrome PART NO. DESCRIPTION 2030-2162 Black 2030-2163 Chrome 2030-2161 2030-2160 2030-2162 2030-2163
FEBRUARY 2023 FEATURED PRODUCTS LICENSE PLATE BRACKETS • Brackets for mounting Kodlin Universal LED License Plate Kits PART #s 2030-2162 or 2030-2163 (sold separately) • Made of steel with a black powdercoat finish • Includes all hardware for installation • Made in the U.S.A. PART NO. DESCRIPTION 2030-2165 For 18-22 Softail models 2030-2164 For 21-22 Sportster S/RH 1250S 2030-2164 PART NO. DESCRIPTION 1621-1117 For 99-22 FLT/FLHT/FLHR/FLTR/FLTRX/FLTRU/FLTRK/FLHX and 09-13 HD FL Trike TRACKBOARDS • CNC-machined billet aluminum floorboards • Black anodized with Kodlin logo • Sold in pairs and include all hardware • Dimensions: 15.75” L x 5” W x 0.75” thick • Matching shifter peg, brake pedal and passenger pegs/m ini boards are available to complete the look TRACKBOARDS MINI FLOORBOARDS •CNC-machined billet aluminum •Black anodized •Dimensions: 4” long, 6.5” wide, 0.75” thick •Requires Kodlin model-specific splined adapters •Sold in pairs PART NO. DESCRIPTION 1621-1118 Black
FEBRUARY 2023 FEATURED PRODUCTS TRACKBOARDS SHIFTER PEG • CNC-machined billet aluminum shifter peg • Lightweight design, black anodized • Fits all HD models using a traditional style 5/16NF screw in toe peg • Dimensions: 1” L x 2.5” W x 0.65” thick • Matching floorboards, brake pedal and passenger pegs/m ini boards are available to complete the look • Sold each PART NO. DESCRIPTION 1603-0380 Shifter peg SPLINED ADAPTERS FOR KODLIN MINI TRACKBOARDS • Required for mounting Kodlin Mini Trackboards (sold separately) • Black finish • Sold in pairs NOTE: See the 2023 Drag Specialties FatBook for an explanation of footpeg mount styles. PART NO. DESCRIPTION 1620-2393 M-Eight Softail/ELW/P an America/Sportster S RH1250 S splined driver peg adapters 1620-2394 M-Eight Softail/ELW/P an America/Sportster S RH1250 S splined passenger peg adapters 1620-2395 Male-mount peg adapters 1620-2393 1620-2394 1620-2395
RkJQdWJsaXNoZXIy NDI5NTY=