2024 Parts Canada June Lowdown

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 2 JUNE 2024 PARTSCANADA.COM SIZE (A) BLACK/CHARCOAL (B) WHITE (C) RED (D) CYAN/GREY XS 0110-8500 0110-8506 0110-8513 0110-8519 S 0110-8501 0110-8507 0110-8514 0110-8520 M 0110-8502 0110-8508 0110-8515 0110-8521 L 0110-8503 0110-8509 0110-8516 0110-8522 XL 0110-8504 0110-8510 0110-8517 0110-8523 2X 0110-8505 0110-8512 0110-8518 0110-8524 ATR-2 HELMETS • Omni-Directional Suspension® (ODS®) technology; improved design reduces linear and angular accelerations • Multi-Impact EPP Outer Liner incorporates Isolation Dampening Towers • Emergency release cheek pads - removable, washable Dri-Lex® antibacterial fabric • Shell - a proprietary woven blend of advanced aerospace carbon fiber, composite fiberglass and Kevlar • Comfort liner - removable, washable comfort liner, Dri-Lex® antibacterial fabric • Shear-away vision screws • Cervical spine relief - rear lower shell incorporates compliant zone at the cervical spine location • Air flow management features 9 intake ports, 6 exhaust ports that work together with the air gap ventilation system • Titanium D-rings • Inner EPS liner is replaceable • Optimal mid, low and high speed impact mitigation • Lightweight with improved center of gravity (+/- 1250 grams Size M) • Clavicle cut-away - provides increased clavicle clearance • Roost guard - provides additional face protection • Sternum pad - provides added protection for the chin, jaw and sternum • Exceeds ECE 22.06, DOT, ACU and ASTM standards • See size guide of the 2024 Drag Specialties/Parts Canada Helmet & Apparel catalogue before ordering A B C D TORQUE

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 4 JUNE 2024 PARTSCANADA.COM FITS MODEL COLOUR BODY/GRAPHICS PART # GRAPHICS PART # GASGAS EC250/300/250F, MC125/250, MC250/350/450F 21-23 Apodis (black 1403-3698 4302-6712 Stokes (white) 1403-3699 4302-6713 HONDA CRF250R 22-23, CRF450R 21-23 Apodis (white) 1403-3700 4302-6714 Stardust (black) 1403-3701 4302-6715 Stokes (white) 1403-3702 4302-6716 Tecna (white) 1403-3703 4302-6717 HUSQVARNA TC125/250, FC250/350 19-22, TE150/250/300, FE350/450 20-23 Apodis (blue) 1403-3704 4302-6718 Stardust (blue) 1403-3705 4302-6719 Stokes (white) 1403-3706 4302-6720 KAWASAKI KXF250 21-23, KXF450 19-23 Apodis (OEM) 1403-3707 4302-6721 Stokes (black) 1403-3708 4302-6722 Stokes (white) 1403-3709 4302-6723 FITS MODEL COLOUR BODY/GRAPHICS PART # GRAPHICS PART # KTM 125-450 SX/SX-F, 150-300 EXC, 250-450 EXC-F 19-22 Apodis (OEM) 1403-3710 4302-6724 Stokes (orange) 1403-3711 4302-6725 Stokes (white) 1403-3712 4302-6726 Tecna (OEM) 1403-3713 4302-6727 SUZUKI RMZ250 19-23, RMZ450 18-23 Apodis (OEM) 1403-3714 4302-6728 Stokes (white) 1403-3715 4302-6729 YAMAHA YZ125/250 22-23 Stokes (white) 1403-3721 4302-6735 YZF250F 19-23, YZF450F 18-22 Apodis (blue) 1403-3716 4302-6730 Apodis (OEM) 1403-3717 4302-6731 Stardust (blue) 1403-3718 4302-6732 Stokes (gray) 1403-3719 4302-6733 Stokes (white) 1403-3720 4302-6734 BODY AND GRAPHICS KITS • High quality plastic and adhesive kit for easy installation • Specific kit for motocross models (does not include headlight holder plastic or headlight holder adhesive) but shares the rest of the adhesive parts with the enduro models • Does not include the headlight holder plastic or the headlight holder adhesive • Body kit includes rear fender, front fender, fork guard, side panels, radiator shrouds and front number plate and rear fender, front fender, fork guard, side panels, radiator shrouds and front number plate decals • Available in body/graphics kit or graphics only kit 1403-3707 4302-6714 4302-6729

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 5 PARTSCANADA.COM JUNE 2024 DESCRIPTION PART # FLEXit Pro 3.0 3850-0660 FLEXIT HEADLAMP PRO 3.0 • 300 total true lumens; spotlight: 200 lumens, floodlights: 200 lumens • Positional center CREE LED spotlight • Side C.O.B. LEDs flood/area lighting - white • Flexible body with Shape-Loc spotlight • Durable ABS battery case • 3 AAA batteries included • IPX4 weather resistant • 6 lighting modes • Comfort fit foam • Operation: Press Power/Mode to turn on • Press to cycle through modes: High spot/high flood, High spot, High flood, Low spot, Low flood, High spot + flashing hazard flood, Off DESCRIPTION PART # EZ 3-gallon jug 3850-0655 EZ 5-gallon jug 3850-0657 Hose bender spout 3850-0658 DESCRIPTION PART # EZ universal transport mount 3850-0659 3-gallon combo 3850-0656 5-gallon combo 3850-0654 EZ UTILITY JUG HOSE MOUNT COMBO • Comes in 3-gallon or 5-gallon jug • Unique breather allows adjustable venting, prevents leaks • Durable thick-walled HDPE (High density polyethylene) plastic • Flat surface in center of jug for custom graphics • 3 ergonomic handle design allows the user to carry and pour at any angle with comfort and control (one on top, one on the side and one on bottom) • Includes: EZ utility jug, clear hose bender spout, EZ floor mount and cap NOTE: EZ Jugs are NOT portable fuel containers as described by ASTM, EPA, ARB and other official agencies. UTILITY JUGS ARE NOT SOLD FOR OR TO BE USED AS A 3850-0654 3850-0656 3850-0659 3850-0658 3850-0657 3850-0655 PORTABLE FUEL CONTAINER. Your use of utility jugs as fuel containers or gas cans may violate the law of your state. Please check your own state law for the legal requirements pertaining to the use of these utility jugs and gas cans. NOT INTENDED FOR DRINKING WATER STORAGE

STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 6 JUNE 2024 PARTSCANADA.COM DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS FITS MODEL PART # FRONT 1000-4 (all) 20-24, Talon 1000R (RS)19-24, 1000X (XS) 19-24 0521-2131 FITS MODEL PART # REAR Talon 1000-4 (all) 20-24 0521-2132 LOWER DOORS FOR HONDA UTV • Constructed of 1/ 8” aluminum • Powdercoated black for supreme durability • Complete installation instructions included • All mounting hardware included • Made in the U.S.A. 0521-2132 0521-2131 FITS MODEL STOCK EXHAUST PART # FMF FATTY PART # GASGAS MC 125 24 1861-1731 1861-1731 HUSQVARNA TC125 23-24 1861-1731 - TE150 24 1861-1731 - FITS MODEL STOCK EXHAUST PART # FMF FATTY PART # KTM 125 SX 23-24 1861-1731 - 125 XC 23-24 1861-1731 - 150 XC-W 24 1861-1731 - PIPE GUARDS BY E LINE • Moose Racing pipe guards offer the most protection, style and durability on the market • Custom molded to fit perfectly every time • Antiballistic composite material, fiberglass, and high temp resins yield an exceptional guard; 8 times stronger, 2 times stiffer, yet 1.5 times lighter than aluminum • Our pipe guards distribute impacts over a large area; aluminum guards cannot duplicate this effect FITS MODEL PART # GASGAS EX250F 24 1861-1730 MC250F 24 1861-1730 EX350F 21-23 1861-1729 MC350F 24 1861-1729 FITS MODEL PART # HUSQVARNA FC/FX250 24 1861-1730 FC350 23-24 1861-1729 FE350 24 1861-1729 FX350 24 1861-1729 FITS MODEL PART # KTM 250 SX-F 23-24 1861-1730 250 XC-F 23-24 1861-1730 350 EXC-F 23-24 1861-1729 350 SX-F/XC-F 23-24 1861-1729 HEAT SHIELDS • If you own a 4-stroke then you owe it to yourself to provide the added protection of an E Line Accessories carbon fiber exhaust shield for your precious header • The head pipe is susceptible to dings and dents as it gets hot so it is critical to protect it • With your riding gear so close to a heat source, it can be burnt quickly • Before you sacrifice another pair of pants or boots, equip your bike with a carbon fiber exhaust heat shield 1861-1730

STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 7 PARTSCANADA.COM JUNE 2024 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS SXS STREET LEGAL TURN SIGNAL CONVERSION KIT FOR POLARIS GENERAL 1000/G ENERAL XP 1000 18-24 • DOT compliant • Plug-and-play installation • Kit includes front amber/white LED turn signal strips, low-profile signal switch, flasher module and Triple Play run/brake/turn signal conversion module • Ten user-selectable brake/strobe patterns • All components are equipped with watertight quick connectors SMART TRIPLE PLAY® MODULE FOR POLARIS GENERAL 1000/G ENERAL XP 1000 18-24 • Converts rear OEM turn signals to run, brake and turn signal function • Works with LEDs or incandescent bulbs • Built-in short circuit protection • Sealed, weathertight case • Plug-and-play installation • Slim line design: 4.2” L x 1.4” W x 0.6” H SXS PLUG-AND-PLAY LICENSE PLATE FRAME WITH TAG ILLUMINATION FOR POLARIS GENERAL 1000/G ENERAL XP 1000 18-24 • Low-profile license plate frame • Aluminum construction with a gloss black finish • Six white LEDs built in for license plate illumination • Horizontal mount • 42” L, 24AWG power and ground wire leads are pre-pinned for installation with provided wiring harness • Horizontal mount • Fits standard 4” x 7” license plates • Mounting hardware included DESCRIPTION PART # For Polaris General 1000/General XP 1000 18-24 2020-2194 DESCRIPTION PART # For Polaris General 1000/General XP 1000 18-24 2050-0505 DESCRIPTION PART # For Polaris General 1000/General XP 1000 18-24 2030-2350

STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 8 JUNE 2024 PARTSCANADA.COM DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS DESCRIPTION PART # Red 4505-0852 Grey 4505-0853 Blue 4505-0854 DESCRIPTION PART # Yellow 4505-0855 Silver 4505-0857 Orange 4505-0858 DESCRIPTION PART # Green 4505-0859 REPLACEMENT PARTS Titanium pin 4505-0874 DESCRIPTION PART # REPLACEMENT PARTS CONT Latch kit & lock pin 4505-0876 ULTRAHOOK XTV • Shackle pin mounting hole accepts screw pins from common 1/ 2”, 5/ 8” shackles and soft shackles up to 7/ 16” • Max-rated load up to 6,000 lbs. • Industry’s first closed-system shackle mount hole machined into the body of the hook • Safety latch retraction pocket resulting in a clear throat opening • Integrated secondary safety latch locking features a latch-locking pin for closed-system winching • EPDM rubber pads for fairlead protection • Finger grip feature that promotes proper “hook-up” orientation and prevents rattling DESCRIPTION PART # Red 4505-0860 Blue 4505-0861 DESCRIPTION PART # Black 4505-0862 Silver 4505-0863 DESCRIPTION PART # Grey 4505-0864 Yellow 4505-0865 DESCRIPTION PART # Orange 4505-0866 Green 4505-0867 HITCHLINK 2.0 RECEIVER SHACKLE MOUNTS • Can be used with screw pin shackles up to 3/ 4” or soft shackles up to 1/ 2” • Made of lightweight, precision CNC-machined 6000-series aluminum • Anodized for oxidation protection • Rated at 9500 lbs., failure at 51,000 lbs. DESCRIPTION PART # Red 4505-0844 Blue 4505-0845 Black 4505-0846 DESCRIPTION PART # Silver 4505-0847 Grey 4505-0848 Yellow 4505-0849 DESCRIPTION PART # Orange 4505-0850 Green 4505-0851 Replacement pin 4505-0874 FLATLINK XTV WINCH SHACKLE MOUNTS • Easy-to-install FlatLink XTV can be used with steel or synthetic winch lines up to 5/ 16” • Precision-machined from 6000-series aluminum and 6Al-4V grade titanium • EPDM rubber guard protects alloy fairleads and prevents rattling • Simple snap ring removal for shear pin • Oval hole opening work with common 1/ 2” or 5/ 8” (pin and bow end), soft shackles up to 7/ 16” and the pin-end of 3/ 4” shackles • For use with winches 6,000 lbs. in capacity or less 4505-0852 4505-0853 4505-0854 4505-0855 4505-0857 4505-0858 4505-0859 4505-0862 4505-0861 4505-0860 4505-0865 4505-0864 4505-0863 4505-0867 4505-0866 4505-0847 4505-0846 4505-0845 4505-0844 4505-0848 4505-0851 4505-0850 4505-0849

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 9 PARTSCANADA.COM JUNE 2024 DESCRIPTION PART # XTV hawse fairlead 4505-0870 XTV HAWSE FAIRLEAD • CNC-machined from 1”-thick 6000-series aluminum bar with large radius opening opening for less rope wear • Durable MIL-A-8625F Type III gunmetal gray hard-anodized finish • For synthetic rope only • Hardware not included DESCRIPTION PART # Red 4505-0836 Blue 4505-0837 Black 4505-0838 DESCRIPTION PART # Silver 4505-0839 Grey 4505-0840 Yellow 4505-0841 DESCRIPTION PART # Orange 4505-0842 Green 4505-0843 Replacement pin 4505-0873 PROLINK XTV WINCH SHACKLE MOUNTS • Easy-to-install ProLink XTV can be used with steel or synthetic winch lines up to 5/ 16” • Rope eye is retained with a 7/ 16” diameter, 6Al-4V grade titanium doubleshear pin and internal snap ring for an ultra-secure connection • Can be used with 1/ 2”, 5/ 8” shackles and soft shackles up to 7/ 16” • EPDM rubber guard protects alloy fairleads and prevents rattling • For use with winches 6,000 lbs. in capacity or less DESCRIPTION PART # UltraHook XT 4505-0868 DESCRIPTION PART # FlatLink XTV 4505-0869 ROPE GUARD • Covers the area where synthetic rope attaches to the FlatLink XTV or UltraHook XTV (both sold separately) • Metal plate made from Kaiser billet 6000-series aluminum • Clear anodized for corrosion protection • Easy installation with four drive rivets DESCRIPTION PART # Rope retention pulley 4505-0871 Rope retention pulley w/ soft shackle 4505-0872 ROPE RETENTION PULLEY FOR XTV • Can be used with a winch’s synthetic rope to increase pulling power and used in conjunction with a soft shackle • Rubber fingers help retain the rope from exiting the pulley grooves • Oversized hole radius provides smooth surface with Teflon-treated friction surface for decreased friction and heat dissipation • For synthetic rope diameters 3/ 16” to 1/ 4” • Billet-machined 6000-series aluminum with Mil-A-8625 F hard-anodized smooth surface • 12,000 lb. working load limit • Made in the U.S.A. DESCRIPTION PART # Snap rings (5-pk.) 4505-0875 SNAP RINGS FOR PROLINK XTV • Zinc-plated • Available in 5-pack • Made in the U.S.A. 4505-0836 4505-0837 4505-0838 4505-0839 4505-0840 4505-0841 4505-0842 4505-0843 4505-0868 4505-0869 4505-0871 4505-0872

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 10 JUNE 2024 PARTSCANADA.COM 450SS EXHAUST AT2 STREET SERIES SLIP-ON 23-24 CF MOTO 450SS/NK AT2 STREET SERIES SO SS/SS/CF • Our AT2 Street Series slip-on with carbon fiber heel guard is designed to optimize power and man, did it! • The 449cc parallel twin, literally woke up! This bike now sounds 200cc bigger than it actually is! The sound emitting from the 450 SS almost sounds like a (dare we say it?) Ducati! • Our dyno verifies what we felt in seat time testing - this feels like a different bike! Gaining 6.3% max hp and a whopping 10% max gain in torque! All this at almost half the weight of the stock muffler. • Our AT2 slip-on is proudly designed and manufactured in Chino, California CRF450R EXHAUST 21-24 HONDA CRF450R/RX SIGNATURE SERIES RS-12 SYSTEM • The new RS-12 system adds 5% max hp and 6.5% max torque • Easier power delivery • Smoother frontside torque • Allows the rider to ride in a higher gear, thus freeing up suspension • Less rider fatique • The RS-12 proudly designed, developed and made in the USA DESCRIPTION PART # 23-24 450SS/NK AT2 SO SS/SS/CF 1811-4656 KX450F EXHAUST 2024 KAWASAKI KX450F SIGNATURE SERIES RS-12 SYSTEM • The new RS-12 system adds 6.4% max hp and 13.8% max torque • Our RS-12 muffler has loads of features including our PTF insert system that makes changing inserts a breeze and an optimized muffler shape with added volume and brake caliper clearance • The RS-12 proudly designed, developed and made in the USA DESCRIPTION PART # 2024 KX450F RS-12 Full System SS/SS/CF 1820-2051 DESCRIPTION PART # 21-24 CRF450R/RX RS-12 Full System SS/SS/CF 1820-2050

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 13 PARTSCANADA.COM JUNE 2024 SIZE WIDTH (MM) DIAMETER (MM) TL/TT BEAD WEIGHT (G) PART # FRONT 29x2.40 61 622 TL/TT FB 957 +/- 48 0344-0036 29x2.60 66 622 TL/TT FB 1120 +/- 56 0344-0035 REAR 27.5x2.40 61 584 TL/TT FB 914 +/- 46 0344-0039 27.5x2.60 66 584 TL/TT FB 1045 +/- 52 0344-0038 27.5x2.80 71 584 TL/TT FB 1043 +/- 52 0344-0037 K1201E HELLKAT • Dual tread compound for longer tread life • Tread design is optimized for a wide range of conditions balancing traction, handling and rolling speed • E-Bike ready - Certified to the ECE-R75 standards for E-bikes up to 50km/h in speed • Blackwall • Tubeless/Tube Type (TL/TT) SIZE WIDTH DIAMETER TL/TT BEAD WEIGHT (G) PART # FRONT 29x2.40 61 622 TL/TT FB 892 +/- 49 0344-0014 29x2.60 66 622 TL/TT FB 971 +/- 49 0344-0013 REAR 27.5x2.40 61 584 TL/TT FB 852 +/- 43 0344-0016 K1214E REGOLITH • All-new, all-round E-mountain bike tire developed to set the benchmark in offroad versatility • Lightweight design lets it rolls fast while providing excellent cornering and braking traction • New dual tread compound combines a fast rolling center compound and goodgripping shoulder compound that has been optimized for E-Mountain bikes • New versatile tread design is extremely predictable and confidence inspiring • EMC casing provides more control, better handling characteristics and better puncture protection than a standard MTB tire • Blackwall • Tubeless/Tube Type (TL/TT) SIZE WIDTH (MM) DIAMETER (MM) TL/TT BEAD WEIGHT (G) PART # FRONT 29x2.60 66 622 TL/TT FB 966 ± 48 0344-0017 29x2.40 61 622 Tubeless ready FB 870 ± 44 0344-0018 K1211E NEVEGAL 2 • Superior flat resistance with an ATC casing that uses Kenda’s proprietary lightweight K-Armor material to increase puncture resistance by 174% over traditional aramid breakers • Design and material offers 50% less rolling resistance than the original Nevegal • EN-DTC dual-tread rubber balances wear and grip, letting knobs do the work of control and braking on the ground • E-Bike ready - Certified to the ECE-R75 standards for E-bikes up to 50km/h in speed • Blackwall • Tubeless/Tube Type (TL/TT) or Tubeless ready K1201E Hellkat K1214E Regolith K1211E Nevegal 2

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 14 JUNE 2024 PARTSCANADA.COM SIZE WIDTH DIAMETER TL/TT BEAD WEIGHT (G) PART # E-MTB M 27.5x2.6 65 584 TL/TT Foldable 950 0344-0110 29x2.6 65 622 TL/TT Foldable 950 0344-0111 E-MTB R REAR 27.5x2.6 65 584 TL/TT Foldable 1230 0344-0112 27.5x2.8 70 584 TL/TT Foldable 1250 0344-0113 29x2.6 65 622 TL/TT Foldable 1315 0344-0114 E-MTB S 27.5x2.6 65 584 TL/TT Foldable 950 0344-0115 29x2.6 65 622 TL/TT Foldable 950 0344-0116 SCORPION E-MTB • SmartGRIP+ compound provides e-MTB specific resistance against tearing, and grip in both wet and dry conditions • Multi-ply 60 TPI nylon for improved reliability and handing performance • HyperWALL e-MTB specific casing featuring multiple protective inserts enhances handling and puncture protection at low inflation pressure • TLR tubeless-ready technology designed for easy mounting and bead stability • Tread and sidewall flat protection • Tubeless ready SCORPION E-MTB M • E-MTB specific tire with the most versatile characteristics for trail and enduro uses • Perfect all-around tire SCORPION E-MTB R • Rear wheel specific tire with a special tread pattern engineered for traction and baking grip • Medium profile tread pattern for quick and confident riding over a variety of terrains Scorpion E-MTB M Scorpion E-MTB R Scorpion E-MTB S Angel DT Urban Front/Rear SIZE (DIA. X WIDTH) PART # 28-622 0344-0140 37-622 0344-0137 SIZE (DIA. X WIDTH) PART # 42-622 0344-0138 47-622 0344-0141 SIZE (DIA. X WIDTH) PART # 52-622 0344-0142 32-623 0344-0139 ANGEL DT URBAN • PROCompound Urban special silica-based rubber maximizes on grip and mileage, fundamental features needed for urban cycling in every weather condition • HyperBELT construction is resistant and durable to handle common obstacles of urban cycling • 60tpi nylon carcass protects against cuts while the 5mm layer of rubber offers extra protection against external objects such as nails and thorns • Meets ECE-R75 certification: tires meet European standards specific to needs of speed e-bikes that go up to 31mph • Reflective stripe meets approval requirements in European ECE-R88 regulations: reflective band emits a sufficiently visible light even at an unfavorable angle SCORPION E-MTB S • Best for any single-track with soft terrain where grip and reliability are key factors • Tall profile and widely spaced tread pattern cuts into and grips any kind of loose or soft terrain

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 15 PARTSCANADA.COM JUNE 2024 INFLATOR KIT • Helps riders quickly inflate their tires and get back to riding in no time • Available in a 16g cartridge size for road tires • Kit contains two cartridges, one CNC-machined inflator head with soft-touch press down button, dual-head nozzle compatible with Presta and Schrader valves and one neoprene sleeve to help avoid freeze burn NOTE: CO2 cartridges cannot be transported on an aircraft. PUNCTURE PLUG REPAIR KIT AND REFILLS • Compatible with road, gravel and mountain bikes with tubeless tire setups • 2-in-1 reamer and plug tool • Repair kit includes 10 refills; additional refill packs available separately 0364-0044 0364-0045 DESCRIPTION PART # Inflator Kit 0363-0116 DESCRIPTION PART # Puncture plug repair kit 0364-0044 Puncture plug refills 0364-0045 RIM TAPE • Tubeless rim tape is made from proprietary performance material with a pressure-sensitive adhesive to provide the right amount of stretch while maintaining durability and strength • Semi-transparent material makes locating the valve hole easy • Supplied with four seal patches • Available in a 10m roll with four widths to suit most rims 0360-0062 0360-0065 CIGAR TOOL PLUG KIT AND CO2 HEAD • Compact tubeless tire repair kit with CO2 adapter • Aluminum storage case with threaded top cap for CO2 • CO2 cartridge screws directly into the plunger tool, doubling as storage and a handle • Comes with Klic CO2 cartridge adapter (Presta only) to allow use of CO2 • Bottle cage bracket to mount directly to bike frame • Includes five tire plugs • Plug refill 10-pack available separately • Weighs: 55g • Measures: 78mm L x 30mm W NOTE: CO2 cartridges cannot be transported on an aircraft. 3812-0678 3812-0677 FXRP FAIRING FIT KITS • Klassic reproduction designed to elevate your motorcycle’s style and performance • Comes as a complete kit • Polyester-primed fiberglass fairing • Powdercoated neck bracket • 7” headlight mount (headlight sold separately) • 9” Flare™ windshield for FXRP style fairings in dark smoke (PART #2310-0635) included • All necessary fasteners and hardware included • Made in the U.S.A. NOTE: Requires relocation of turn signals. 2331-0202 2331-0201 DESCRIPTION PART # 10m/25mm 0360-0062 10m/28mm 0360-0063 DESCRIPTION PART # Cigar Tool Plug Kit and CO2 Head 3812-0677 Plug refill 10-pack 3812-0678 DESCRIPTION PART # For 22-23 Chief 2331-0201 For 16-23 Springfield 2331-0202

Made with FlippingBook

RkJQdWJsaXNoZXIy NDI5NTY=