DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 9 PARTSCANADA.COM JUNE 2024 DESCRIPTION PART # XTV hawse fairlead 4505-0870 XTV HAWSE FAIRLEAD • CNC-machined from 1”-thick 6000-series aluminum bar with large radius opening opening for less rope wear • Durable MIL-A-8625F Type III gunmetal gray hard-anodized finish • For synthetic rope only • Hardware not included DESCRIPTION PART # Red 4505-0836 Blue 4505-0837 Black 4505-0838 DESCRIPTION PART # Silver 4505-0839 Grey 4505-0840 Yellow 4505-0841 DESCRIPTION PART # Orange 4505-0842 Green 4505-0843 Replacement pin 4505-0873 PROLINK XTV WINCH SHACKLE MOUNTS • Easy-to-install ProLink XTV can be used with steel or synthetic winch lines up to 5/ 16” • Rope eye is retained with a 7/ 16” diameter, 6Al-4V grade titanium doubleshear pin and internal snap ring for an ultra-secure connection • Can be used with 1/ 2”, 5/ 8” shackles and soft shackles up to 7/ 16” • EPDM rubber guard protects alloy fairleads and prevents rattling • For use with winches 6,000 lbs. in capacity or less DESCRIPTION PART # UltraHook XT 4505-0868 DESCRIPTION PART # FlatLink XTV 4505-0869 ROPE GUARD • Covers the area where synthetic rope attaches to the FlatLink XTV or UltraHook XTV (both sold separately) • Metal plate made from Kaiser billet 6000-series aluminum • Clear anodized for corrosion protection • Easy installation with four drive rivets DESCRIPTION PART # Rope retention pulley 4505-0871 Rope retention pulley w/ soft shackle 4505-0872 ROPE RETENTION PULLEY FOR XTV • Can be used with a winch’s synthetic rope to increase pulling power and used in conjunction with a soft shackle • Rubber fingers help retain the rope from exiting the pulley grooves • Oversized hole radius provides smooth surface with Teflon-treated friction surface for decreased friction and heat dissipation • For synthetic rope diameters 3/ 16” to 1/ 4” • Billet-machined 6000-series aluminum with Mil-A-8625 F hard-anodized smooth surface • 12,000 lb. working load limit • Made in the U.S.A. DESCRIPTION PART # Snap rings (5-pk.) 4505-0875 SNAP RINGS FOR PROLINK XTV • Zinc-plated • Available in 5-pack • Made in the U.S.A. 4505-0836 4505-0837 4505-0838 4505-0839 4505-0840 4505-0841 4505-0842 4505-0843 4505-0868 4505-0869 4505-0871 4505-0872
RkJQdWJsaXNoZXIy NDI5NTY=