DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PARTSCANADA.COM JULY 2024 LOWDOWN STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL PART # DESCRIPTION 0301-1005 120/70ZR17M/C 58W FRONT 0301-1006 160/60ZR17M/C 69W REAR 0301-1007 180/55ZR17M/C 73W REAR 0301-1008 190/50ZR17M/C 73W REAR 0301-1009 190/55ZR17M/C 75W REAR 0301-1010 200/55ZR17M/C 78W REAR BATTLAX HYPERSPORT S23 • Raising the bar of hypersport performance – yet again. • The Battlax Hypersport S23 is Bridgestone’s ultimate hypersport tire designed to amplify your riding experience with exhilarating performance and precision control. Delivering improvements over the the Battlax Hypersport S22, the S23 is a next generation tire that’s engineered for increased wet and dry grip, plus cornering stability without compromising wear for more time carving up the road. • New tread compound on front shoulder and rear edge to enhance dry grip. • New pattern design implements Pulse Groove technology to increase water drainage and grip in wet conditions. • Optimized pattern stiffness supports improved traction and stability. • 8% improved rear tire wear performance for more ride time. • (120/70ZR17 & 190/55ZR17) vs previous generation BATTLAX HYPERSPORT S22 (120/70ZR17 & 190/55ZR17) in internal testing. Results may vary depending upon proper tire and vehicle maintenance, surface conditions, and riding habits.
DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 2 JULY 2024 PARTSCANADA.COM PART # DESCRIPTION 0640-1664 SXS LED Mirrors SXS LED MIRRORS • Driver facing mirror glass measures 7.5” x 5.25” • Side view mirrors with white running lights and amber sequential turn signals • Each unit forward facing side contains 8 bright white LED running lights, plus 12 amber LEDs which act as a sequential turn signal • Units equipped with 6’ wire leads and waterproof connector for plug and play installation • Plug-and-play with Custom Dynamics SXS turn signal module (Part #2050-0449, sold separately) • Anti-slip design requires the tightening of two screws to secure each mirror • Adjustable bracket design allows mirrors to be positioned for desired visual angle, and can also be quickly folded to prevent damage to the mirror • Compatible with windshields • Mirrors install to any 1.6”-2” round tube roll cage with affixed C-clamps • Operating voltage: 9V-18V DC, Wattage: 15W • Sold in pairs • Connectors can be removed for hardwired applications PART # DESCRIPTION 2040-2706 UTV Turn Signal Kit UTV TURN SIGNAL KIT • Three-position, heavy-duty switch mounts to steering column with included metal hose clamp • Plastic body with chrome metal switch handle • 8-wire switch outputs left, right and optional rear multiplexed brake/turn signals • Built-in four-way hazard function and built-in turn signal indicators with 36” of wire leads • Includes LED turn signal kit with two 1.25” amber LED front turn signals and two 1.25” red LED rear turn signals/brake lights
DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 3 PARTSCANADA.COM JULY 2024 PART # DESCRIPTION 2050-0505 Smart Triple Play® Module SMART TRIPLE PLAY® MODULE FOR POLARIS GENERAL 1000/G ENERAL XP 1000 18-24 • Converts rear OEM turn signals to run, brake and turn signal function • Works with LEDs or incandescent bulbs • Ability to apply brake strobe/flash patterns on center taillight only, rear turns only, or rear turns and center taillight • Built-in short circuit protection • Sealed, weathertight case • Plug-and-play installation • Slim line design: 4.2” L x 1.4” W x 0.6” H • See the 2024 Parts Canada ATV/UTV catalog for additional Smart Triple Play® module applications PART # DESCRIPTION 2107-0333 Electromagnetic Dual Horn Kit ELECTROMAGNETIC DUAL HORN KIT • Has dual 109 dB (at 2 meters) low- and high-tone electromagnetic MARCO horns • Kit includes two horns, mounting bracket, wire harness, relay and on/off momentary rocker switch • Connects directly to the battery for easy installation • For use with 12V electrical systems PART # DESCRIPTION 2107-0332 Electromagnetic Dual Horn Kit ELECTROMAGNETIC DUAL HORN KIT • Dual low/high tone electromagnetic horns • Kit includes horns, mounting bracket, wire harness and relay • 109 db(A) at 2m per horn • Nominal voltage: 12VDC
DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 4 JULY 2024 PARTSCANADA.COM PART # DESCRIPTION 0401-0098 RXF38 M.2 FORK RXF38 M.2 FORK • Race-proven TTX18 damping system now available in a single crown fork • Independent cartridge air spring and damper systems • Designed for 200 mm rotor size, 255 mm max • Easy to tune three-chamber air spring system • Includes 15 mm axle • 38 mm stanchion diameter • 44 mm offset • Floating axle design minimizes friction • Compatible with maximum tire sizes up to 29” x 2.6” • Weighs 5.11 lbs (2,320 g) • Axle to crown measurement: 583 mm at 170 mm stroke PART # DESCRIPTION 1311-0164 TTX2 AIR SHOCK TTX2 AIR SHOCK FOR INTENSE TAZER MX • TTX highly adjustable compression valve technology • Race-proven setting bank • Double-can design with larger air volume in both positive and negative chamber • Adjustable High-Speed Compression (HSC), Low-Speed Compression (LSC) and Rebound damping • Five compression and six rebound click settings to choose from to suit any type of linkage design • Climb mode • Air spring volume spacers included as standard in the shock kit • Maximum air pressure up to 325 psi • Weighs 15.91 oz (451 g) PART # DESCRIPTION 1311-0165 TTX1 AIR SHOCK TTX1 AIR SHOCK FOR SPECIALIZED LEVO • Compact end eye design allows fitment to a broader range of frame designs • TTX highly adjustable compression valve technology • Adjustable High-Speed Compression (HSC), Low-Speed Compression (LSC) and Rebound damping • Single-can design optimized for linear linkage designs and tighter fitment space • Race-proven setting bank to suit any type of riding or linkage design • Climb mode • Air spring volume spacers including as standard in the shock kit • Maximum air pressure up to 300 psi
DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 5 PARTSCANADA.COM JULY 2024 FITS MODEL DESCRIPTION PART # INTENSE Tazer MX (all) 150 mm 1311-0163 FITS MODEL DESCRIPTION PART # SPECIALIZED Levo 18-21 155 mm 1311-0162 TTX22 M.2 COIL SHOCKS • TTX-technology • Specifically designed for E-bike use • Nitrogen pressurized bladder reservoir system • Weighs 3.3 lbs (1,495 g) • External 3-level high-speed compression adjustment • Easy-to-change spring • Easy to set up with a wider adjustment range to suit different riding conditions • External 16-click low-speed compression adjustment rebound damping adjustment RIDER WEIGHT SPRING RATE PART # INTENSE TAZER MX 101-109 lb. 365 lb./in. (64 N/mm) 1312-0927 110-118 lb. 411 lb./in. (72 N/mm) 1312-0928 118-125 lb. 411 lb./in. (72 N/mm) 1312-0929 126-133 lb. 434 lb./in. (76 N/mm) 1312-0930 134-142 lb. 457 lb./in. (80 N/mm) 1312-0931 143-150 lb. 480 lb./in. (84 N/mm) 1312-0932 151-158 lb. 502 lb./in. (88 N/mm) 1312-0933 159-166 lb. 525 lb./in. (92 N/mm) 1312-0934 167-174 lb. 548 lb./in. (96 N/mm) 1312-0935 175-183 lb. 571 lb./in. (100 N/mm) 1312-0936 184-195 lb. 605 lb./in. (106 N/mm) 1312-0937 196-207 lb. 640 lb./in. (112 N/mm) 1312-0938 208-220 lb. 674 lb./in. (118 N/mm) 1312-0939 221-230 lb. 708 lb./in. (124 N/mm) 1312-0940 RIDER WEIGHT SPRING RATE PART # SPECIALIZED LEVO 18-21 95-100 lb. 365 lb./in. (64 N/mm) 1312-0927 106-111 lb. 388 lb./in. (68 N/mm) 1312-0928 112-120 lb. 411 lb./in. (72 N/mm) 1312-0929 121-125 lb. 434 lb./in. (76 N/mm) 1312-0930 126-135 lb. 457 lb./in. (80 N/mm) 1312-0931 136-142 lb. 480 lb./in. (84 N/mm) 1312-0932 143-152 lb. 502 lb./in. (88 N/mm) 1312-0933 153-158 lb. 525 lb./in. (92 N/mm) 1312-0934 159-162 lb. 548 lb./in. (96 N/mm) 1312-0935 163-167 lb. 571 lb./in. (100 N/mm) 1312-0936 168-175 lb. 605 lb./in. (106 N/mm) 1312-0937 176-185 lb. 640 lb./in. (112 N/mm) 1312-0938 186-197 lb. 674 lb./in. (118 N/mm) 1312-0939 198-220 lb. 708 lb./in. (124 N/mm) 1312-0940 SHOCK SPRINGS FOR INTENSE TAZER MX/SPECIALIZED LEVO • Genuine Ohlins factory shock springs for the TTX22 m.2 rear shock • Race-ready rear shock spring series built to be lightweight with big mountain strength • Manufacturing process involves a multi-step surface treatment for corrosion resistance and durability as well as cutting-edge heat treatments for strength and product life • Allowed deflection: 2.25” (57 mm) • Sold each NOTE: Optimized for 30% sag. 1312-0927 1311-0162 • External 6-click rebound adjustment NOTE: Spring sold separately; see Ohlins spring chart for correct spring. DESCRIPTION PART # Shock spanner wrench OH00710-02 SHOCK SPANNER WRENCH • C-spanner wrench allows you to adjust spring preload • For Öhlins shocks that do not have a hydraulic preload adjuster
DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 6 JULY 2024 PARTSCANADA.COM 2” DELUXE RISERS FOR 7/ 8” HANDLEBARS • Fit most applications with 7/ 8” handlebars and a 7/ 8” bar clamp • Sleek, stylish design • Machined from billet 6061-T6 aluminum • Anodized clear finish • Made in the U.S.A. NOTE: First determine if you have adequate brake line/cable length and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models. DESCRIPTION PART # 2” Deluxe pivoting risers 0602-0656 PIVOTING HANDLEBAR RISERS FOR 7/ 8” BAR CLAMPS • Incredibly universal, with a two-piece design that allows them to be clamped to almost any motorcycle with 7/ 8” handlebar clamps • Risers are held by the original clamps and re-clamp the handlebars with pivoting fore and aft adjustment • 2” rise; for use with 7/ 8” diameter handlebar • Outboard positioning also makes them incredibly durable • Available in black or natural aluminum finish • Made in the U.S.A. NOTE: First determine if you have adequate brake line/cable length and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models. COLOUR PART # Black 0602-0296 COLOUR PART # Natural aluminum 0602-0439 1 1/ 2” BARBACK BLOCK RISERS FOR HONDA REBEL 300, 500,1100 • Very easy installation • Lifetime warranty • 1 1/ 2” rise • Moves the handlebar 1.5” up and 1.2” back • Works with your OEM cables and lines • Black anodized finish • Made in the U.S.A. DESCRIPTION PART # 1 1/2” barback risers 0602-1449 PRO-OFFSET ELITE BLOCK RISERS • Unique design allows for installation in either direction • 1 1/ 4” rise; for use with 7/ 8” or 1 1/ 8” handlebars • 1” offset means bar can be moved closer or farther away, depending on rider preference • Reducers lock into risers to ensure no slippage between components • Rox Pro-Offset risers have an oblong hole that fits virtually any fore and aft bolt center-to-center distance with 8mm bolt threads • Made in the U.S.A. NOTE: First determine if you have adequate brake line/cable length and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models. FINISH PART # 1 3/4” PIVOTING RISERS FOR BMW F800/850GS, KAWASAKI VERSYS 1000, KTM 250/ 300/450/500 EX/EXC AND 690/990/1190/120 ADVENTURE/SUPER ADVENTURE Clear anodized 0602-0438 Black anodized 0602-0658 KTM special edition orange 0602-0909 FINISH PART # 2” PIVOTING RISERS FOR BMW F800GT, R1200GS THROUGH 12, R NINET, DUCATI HYPERMOTARD, MULTISTRADA 10-20, HONDA AFRICA TWIN, KTM 250/300XC, 350/450 EXC/XC/SXF, 500 EXC/XC, 690 E/R, 990 ADV/BAJA/SUPER ENDURO, 1190 ADV, 1290 SUPER ADV, MOTO GUZZI STELVIO 1200, TRIUMPH TIGER 800 XC/XCS 11-17, TIGER 800 STREET/ROAD 11-17, TIGER 1200 EXPLORER, YAMAHA SUPER TENERE THRU 13 Natural aluminum 0602-0437 Clear anodized 0602-0651 Gray anodized 0602-0652 Black anodized 0602-0653 ROX PIVOTING HANDLEBAR RISERS FOR 1 1/ 8” BAR CLAMPS • Very popular addition for the BMW F800GS, KTM 690 Enduro and 990/1190 Adventure • Also fit many other street, off-road and dual sport models with a 1 1/ 8” stem clamp and a 1 1/ 8” handlebar • Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position • Engineered and tested for maximum strength and durability 0602-0654 0602-0657 0602-0439 0602-0296 • CNC-machined from billet 6061-T6 aluminum, then anodized for long-lasting good looks • Made in the U.S.A. NOTE: First determine if you have adequate brake line/cable length, and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models. 0602-0651 0602-0652 0602-0658 0602-0909 0602-0438 FINISH PART # Clear anodized 0602-0654 FINISH PART # Black anodized 0602-0657
DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 7 PARTSCANADA.COM JULY 2024 PART # DESCRIPTION 0520-4046 Disc Cover- Linear J FANTIC XE125:21-24, XE300:24, XEF250/450:21-24, XEF310:24, XX125/250:21-24, XXF250/450:21-24, HONDA CRF250R:18-24, CRF250RX:22-24, CRF450R/450RX:17-24, CRF450RL:21-24, KX250/250X:21-24, KX450:20-24, KX450X:21-24, SHERCO 125-500:24, YAMAHA YZ125/250:04-24, YZ250F/450F:14-24, YZ250FX/450FX:19-24, WR450F:24 white 0520-4046 Disc Cover- Linear J FANTIC XE125:21-24, XE300:24, XEF250/450:21-24, XEF310:24, XX125/250:21-24, XXF250/450:21-24, HONDA CRF250R:18-24, CRF250RX:22-24, CRF450R/450RX:17-24, CRF450RL:21-24, KX250/250X:21-24, KX450:20-24, KX450X:21-24, SHERCO 125-500:24, YAMAHA YZ125/250:04-24, YZ250F/450F:14-24, YZ250FX/450FX:19-24, WR450F:24 blue 0520-4058 Disc Cover- Linear B BETA RR 2T 125/200:19-24, RR 2T 250/300:13-24, RR 4T 350:13-24, RR 4T 390:20-24, RR 4T 430/480:15-24, RR 2T 125/200/250/300 RACING:20-24, RR 4T 350/390/430/480RACING:20-24, RX350/450:22-24 white 0520-4059 Disc Cover- Linear B BETA RR 2T 125/200:19-24, RR 2T 250/300:13-24, RR 4T 350:13-24, RR 4T 390:20-24, RR 4T 430/480:15-24, RR 2T 125/200/250/300 RACING:20-24, RR 4T 350/390/430/480RACING:20-24, RX350/450:22-24 black 0940-2209 X-Power KIT CRF250R/RX:22-24 black 0940-2210 X-Power KIT CRF250R/RX:22-24 red 0520-4046 - BLUE 0520-4046 - WHITE 0520-4059 - WHITE 0520-4058 - WHITE 0940-2209 0940-2210 LINEAR DISC COVERS • Lightweight and resistant. • Designed to protect the disc and left fork leg from sliding and impacts. • The special attachment point, which uses the wheel axle nut, allows both a quick application and additional protection of the left fork leg. • Specially designed to be able to adjust the suspension and to tighten and loosen the leg bolts without necessarily having to remove the disc cover. • The extension of the disc guard to the caliper protects the caliper assembly from shocks and mud. • Multiple ventilation windows allow correct temperature self-adjustment, preventing disc/caliper overheating. • Max. disc Ø 280 mm • Weight 200g • Before you buy: check the compatibility with your bike • 90% Plastic •10% Steel • Made In: Italy X-POWER KITS FOR HONDA • Engine crankcase coating against wear, shocks, abrasions due to contact with boots, mud, sand and debris • Right side: clutch cover protection, water pump and lower crankcase • Left side: ignition cover and clutch actuator protection • Easy to install: it is applied on the crankcase thanks to the original screws adhering perfectly to the clutch/ignition cover • Resistant to high temperatures • Design studied not to interfere with the boots • Compatible with ACERBIS skid plates
DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 8 JULY 2024 PARTSCANADA.COM 0506-2289 0506-2290 0701-1016 PART # DESCRIPTION 0701-1016 Fuel Valve Aluminum 0506-2289 Skid Plate- LG BETA RC 250/300:24 black 0506-2290 Skid Plate- LG BETA RC 250/300:24 red ALLUMINIUM GAS TANK VENT • 12 pcs. set SKID PLATE FOR BETA • Latest generation sub-engine made of high-strength plastic with integrated fin • Fin designed to protect the shock absorber linkage from impacts, mud and sand allows you to slide easily over natural obstacles (whoops, stones, logs) ensuring a smooth ride • The design ensures maximum adherence to the link • 6 mm thickness for maximum protection of the frame and engine • Extended protection areas on the side casings, on the valve adjustment cover and in the footrest frame area • Presence of unloading areas to give more lightness, ventilation and facilitate washing operations inside the sub-engine • Design studied to reduce the entry of mud and debris into the engine • Compatible with simultaneous use of X-POWER • Using the two screws supplied and using the original bike attachments, it is possible to fasten and remove the sub-engine quickly. • Weight: 885g • 96% Plastic • 4% Other • Made In: Italy
DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS STREET • OFFROAD • ATV/UTV • SNOWMOBILE • BICYCLE • TIRE & SERVICE • HELMET & APPAREL 9 PARTSCANADA.COM JULY 2024 DESCRIPTION S M L XL 2XL Red Bull Misano GP 0101-17301 0101-17302 0101-17303 0101-17304 0101-17305 RPHA 1 HELMETS • Pinlock ready HJ-35 shield provides 99% UV protection, anti-scratch coated, double locking system • Pinlock anti-fog insert • Tear-off posts installed; tear-off film included • All-new easy attachment system allows simple and secure tool-less visor (shield) replacement • Transparent racing spoiler • For replacement parts and accessories, see the 2024 Parts Canada Helmet and Apparel catalogue • See helmet size chart in the the 2024 Parts Canada Helmet and Apparel catalogue before ordering • FIM (FRHPhe-01) and ECE 22.06 certified
RkJQdWJsaXNoZXIy NDI5NTY=