HOLESHOT PRACTICE STARTING GATE • Races can be won or lost at the drop of the gate, so perfecting the starting technique is key to MX racers who want to be on the podium • Improve reaction time and learn to control power out of the gate and into the first corner • The “Holeshot” is a completely random-timed, electronic, wireless, practice starting gate • Allows riders to independently practice starts • When the rider presses the wireless remote button mounted on their crossbar pad, it will activate a computer-controlled timing sequence, which will drop the gate randomly • Watch the glowing LED, when it starts blinking it is like the 30-second board turning sideways • The gate will now drop randomly between one to five seconds • Resetting the gate is as easy as riding by and stepping on the backside of the hoop without dismounting • Multiple gates can be electronically linked for multi-racer, bar banging practice • Instant-drop feature allows a trainer to bypass the random timing sequence and drop the gate instantly when the button is pressed COLOUR PART NO. Red 0630-1908 Blue 0630-1909 Green 0630-1910 Orange 0630-1911 Yellow 0630-1912 FUSION 2.0 GRIPS PART NO. 0630-1918 PART NO. 9501-0154 MUD GRIPS 0630-1908 0630-1909 0630-1910 0630-1911 0630-1912 • Dual-compound Motocross Grips with Fusion Bonding System, which eliminates the need for grip glue and grip wire • The ergonomic “wave” on the flange of the grip reduces pressure points between the riders thumb and the grip flange • Grip design greatly reduces heat and pressure, which reduces blistering and increases rider comfort • The included Fusion Bonding System consists of two Fusion bonding strips and one Fusion spray catalyst bottle • Easy to install: clean your handlebar, apply the included bonding strips, shake and spray the included catalyst to the exposed bonding strips, quickly apply grips and you’re done • At first the catalyst acts as a lubricant for easy grip installation, but after it dries it creates a lasting bond • For 7/ 8” handlebars and twist throttles • 115mm L • Sold in pairs • Grip cover that allows riders to maintain control of their bike when riding or competing in muddy conditions • Enable riders to keep a tight grasp by making the grips feel dry, even on the nastiest tracks or trails • Every rider has, at one point or another, experienced arm pump from gripping too hard while trying to hold onto wet, muddy, slippery grips during a ride in the rain or on an over-watered track • By slipping the Risk Racing Mud Grip over their regular grips, they can prevent slippage and loss of control, while helping to reduce the chances of arm pump • The material compresses to almost zero thickness, so the rider barely notices that the Mud Grip is on • When coated with mud, the grips disperse the muck and create a tactile surface area that is equivalent to a dry grip • Make a slippery, muddy grip feel dry when riding • Ultra-thin design does not affect grip diameter • Slide over any MX, ATV, MTB or BMX grip • Sold in pairs
RkJQdWJsaXNoZXIy NDI5NTY=