2021 Parts Canada October Skinny

THE DRAGSPECIALTIES 2 OCTOBER 2021 dragspecialties.com FRONT ROTORS DESCRIPTION GALAXY PLATINUM CUT FOR 08-20 FLTR/ FLHT/ FLHR/ FLHX, H-D FL TRIKE 11.8”, front left 1710-3296 11.8”, front right 1710-3297 REAR ROTORS DESCRIPTION GALAXY PLATINUM CUT FOR 08‑20 FLTR/ FLHT/ FLHR/ FLHX 11.8”, rear 1710‑3298 Galaxy Platinum Cut TWO-PIECE BRAKE ROTORS 1 1 / 4 ” VIKING HANDLEBARS • Viking handlebar internal design guarantees easy installations of complete wiring harnesses • Without taking away from the clean look of the peak, the novel design creates enough room to allow the complete wiring harness with factory vinyl covering and the terminal connections along with their respective shrink sleeve to easily pass through without chaffing • Using a unique flaring process, the burr-free internal radius creates a generous pocket of additional clearance within the troublesome peak of the handlebar • To make wiring installations even easier, Magnum preloads the bars with E-Z pull-thru plastic woven sleeving • Insert the wiring harness into the sleeving and pull through, it’s that simple • Manufactured with the highest quality construction, including machined control mounts (not swaged) plus burr-free internal wiring holes and electronic throttle control slots • All handlebars are 1 1 / 4 ” diameter (except Warrior bars with 1 1 / 4 ” center), have 1” diameter center sections, 3 1 / 2 ” on center knurling and work with standard controls, including hydraulic clutch and OE heated grips • Each handlebar is CNC-mandrel bent for an accurate fit and incorporates an aggressive look with wrist angles engineered for riding comfort • Warrior bars work with OE risers and clamps, are knurled, have the factory wiring hole location, do not require removal of the riser pin and incorporate over 30° of adjustability for comfort • Bagger style bars are designed for the correct clearance on Batwing models • Available in 10”, 12”, 14” and 16” high Warrior, Bagger or Ape Hanger styles with high-luster chrome or gloss black finishes for an unsurpassed appearance • Made in the U.S.A. NOTE: Not for use with stock risers and handlebar clamp/​gauge mount clamp on 883C/​1200C models. NOTE: Except for Warrior handlebars with a 1 1 / 4 ” center section, all other Viking Handlebars have a 1” diameter center section and fit 1” risers. Models originally equipped with handlebars that have a center section diameter larger than 1” will require changing the risers to a 1” ID version. CHROME PART # GLOSS BLACK PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK FOR 15-20 FLTRX/S, 16-19 FLTRU, 20 FLTRK 0601-5438 0601-5442 10” Warrior 10” 33 3 / 4 ” 8” 6” 0601-5439 0601-5443 12” Warrior 12” 34 1 / 4 ” 8” 6” 0601-5440 0601-5444 14” Warrior 14” 34 1 / 2 ” 8” 6” 0601-5441 0601-5445 16” Warrior 16” 35” 8” 6”