COMPETITION 2 RACE 2-INTO-1 EXHAUST SYSTEM* • Radical 2-into-1 headpipe design stepped 13/4’’ into 17/8’’ designed for performance and increased lean angle as well as a very aggressive exhaust sound • Made to fit aftermarket mid controls by Speed Merchant, Performance Machine and Boosted Brad • Stainless steel construction and hand TIG welding • Partial coverage heat shields included • 18mm O2 ports with 12mm adapters • Includes mounting hardware • Billet slash-cut end cap • Made in the U.S.A. PART # DESCRIPTION 1800-2538 For 17-21 FLHT/FLHTK/FLHR/FLHX/FLTRX/FLTRU/FKLTRK w/ aftermarket mid controls from Performance Machine, Speed Merchant and Boosted Brad THE DRAG SPECIALTIES MARCH 2022 dragspecialties.com
MARCH 2022 THE DRAG SPECIALTIES dragspecialties.com 2 REPLACEMENT WINDSHIELDS • Made of crystal-clear or tinted 3/16” Lucite® • Distortion-free, optically correct and break-resistant • Precision crafted for a perfect fit • Made in the U.S.A. PART # DESCRIPTION FOR 20-21 CHALLENGER CLEAR 2312-0873 9.5” 2312-0874 11.5” PART # DESCRIPTION FOR 20-21 CHALLENGER (CONT) TINTED 2312-0875 9.5” 2312-0876 11.5” LOWER BATWING FAIRING SKIRTS • Enhances the fairing/triple tree area under the headlight • Simple bolt-on installation • Mounts with existing hardware PART # DESCRIPTION FOR 14-21 FLHT/FLHX 2330-0260 ABS plastic w/ chrome finish; repl. OEM #57000017 PART # DESCRIPTION FOR 14-21 FLHT/FLHX (CONT) 2330-0261 ABS plastic w/ gloss black finish; repl. OEM #57100227 CHARGING SYSTEM KITS • Kits include OEM-style rotor, three-phase stator and regulator • All components meet or exceed OEM specifications PART # DESCRIPTION FOR 17-21 FLHT/FLHX/FLHR/FLTRX/FLTRU/FLTRK, 17-21 FLHTCUTG/FLRT MODELS (48 AMP) 2112-1516 W/ black regulator 2112-1517 W/ chrome regulator PART # DESCRIPTION FOR 18-21 FLHC/FLDE/FLSL/FLFB/FLSB/FXST/FXBR/FXBB/FXFB/FXLR/FXDR MODELS (40 AMP) 2112-1518 W/ black regulator 2112-1519 W/ chrome regulator 2112-1516 2112-1519 2312-0873 2312-0876 2330-0260 2330-0261
MARCH 2022 THE DRAG SPECIALTIES 3 dragspecialties.com PART # DESCRIPTION 4405-0857 For 14-21 Touring models w/ HD or aftermarket air-cooled lower fairings added FAIRING VENT SCREEN • Accents the vent system on the Indian Challenger • Easy to install • Adds a custom touch to the front of your fairing • Screen catches or stops larger bugs and other road debris from entering through your fairing vent • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION 2330-0237 For 20-21 Challenger UNIVERSAL iO PHONE MOUNT • Secure devices within any vehicle with a flat mounting surface (stick on or bolt on options) • Universal kit is perfect not only for UTVs but also boats, tractors, semis, hot rods and more • Attach razor-thin iOadapt™ stainless steel adapter to your device and connect to the powerful iOcore™ magnetic carrier • No special case needed; device is held in place by the strong iOcore magnet, and can be adjusted to preferred angle • Included in box: one Semisphere mount, adhesive patch, two iOadapt steel disks and one magnetic black iOcore • Adhesive requires 72 hours for proper cure time • Purchase additional iOadapt discs to use multiple devices on same mount NOTE: Not for use with phones that have inductive charging. NOTE: Not for use with Samsung Galaxy S4 phones. PART # DESCRIPTION 0636-0192 Universal phone mount 5.25” FRONT AND REAR SPEAKER • Gen 4, 5.25” 6-ohm speaker fits front and rear locations • Perfect replacement speaker when using radios built-in power on 99 bikes • Vented magnet properly controls heat for added reliability • Sound is tailored to cut through exhaust and wind noise • Install using factory grilles or use Hogtunes front speaker metal mesh grilles (PART #4405-0379) • Compatible with popular plug-and-play aftermarket radios • Sold in pairs PART # DESCRIPTION 4405-0763 For 99-05 models w/ factory radios only LOWER SPEAKER ADAPTERS FOR AIR-COOLED BIKES • 6.5” lower speaker adapters
MARCH 2022 THE DRAG SPECIALTIES dragspecialties.com 4 POWER COMMANDER V* • Fuel control for each individual cylinder in a smaller enclosure • ”Warm-up” fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading) • Includes ignition adjustment feature; allows full ignition timing control of each cylinder • Easy to install • USB powered from computer; 9 volt adapter is no longer needed • Two-position map-switching function built in • Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps • Gear/speed input allows for map adjustment based on gear • Analog input allows user to install any 0-5 volt sensor • Build an adjustment table based on analog input such as boost or temperature • Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected • Enhanced “accel pump” utility • Made in the U.S.A. PART # DESCRIPTION 1020-3481 For 22 Chief w/ crank sensor FOR DRESSER/TOURING PART # DESCRIPTION FOR 08-21 FLHR/FLHT/FLHX/FLTR/FLTRU/FLTRK/FLTRX AND 09-13 TRIKES 0801-1361 Unknown Industries extended reach gripper seat UNKNOWN INDUSTRIES EXTENDED REACH PERFORMANCE GRIPPER SEAT • Extends the driver’s seating area by a full 2” • Combines a GelCore™ interior and Ultra-Foam to create a foam that is a perfect balance of rigidity and user compliance • Crafted with Saddlemen’s carbon fiber at the front, black gripper on the lumbar support and SaddleHyde™ sides • Made in the U.S.A. PART # DESCRIPTION 0801-1360 For 08-21 FLHR/FLHT/FLHX/FLTR/FLTRX/FLTRU/ FLTRK PART # DESCRIPTION 0801-1358 For 99-07 FLHR (except FLHRS), 06-07 FLHX 0801-1359 For 99-07 FLHT/FLTR UNKNOWN INDUSTRIES PERFORMANCE GRIPPER SEATS • Combines a GelCore™ interior and Ultra-Foam to create a foam that is a perfect balance of rigidity and user compliance • Crafted with Saddlemen’s carbon fiber at the front, black gripper on the lumbar support and SaddleHyde™ sides • Made in the U.S.A. 0801-1360
MARCH 2022 THE DRAG SPECIALTIES 5 dragspecialties.com S&S CYCLE A history of proven performance, driven by a passion for speed. S&S continues to be the industry leader for quality high-performance parts for your American V-Twin. Their new Tuned Induction Air Cleaners feature carefully engineered and laser-cut tubes merged to a single collector and dual high-flow air filters to create a stylish package that maximizes the performance of your M-Eight’s intake system. TUNED INDUCTION AIR CLEANERS* • Uses two laser-cut and highly engineered tubes merged into a single collector, fed by a pair of high-flow air filters directly in the airstream • Bolt-on performance: more than twice the filter area compared to the stock intake system • Boosts horsepower and torque across the rpm range using air column inertia and carefully timed gas dynamic pressure waves • Smooth intake tract using carefully selected and tuned lengths to aid performance • High-flow, washable and reusable cotton media air filter elements NOTE: Will not fit Touring models with fairing lower glove boxes or Twin-Cooled models. PART # DESCRIPTION FOR 17-21 M-EIGHT 1010-2885 Stainless steel 1010-2880 Chrome 1010-2881 Gloss black FOR 08-16 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKE, 16-17 FXDLS AND 16-17 SOFTAILS 1010-2882 Stainless steel 1010-2883 Chrome 1010-2884 Gloss black 1010-2880 1010-2882 1010-2884 PART # DESCRIPTION 1011-2052 For 08-16 FLHT/FLHR/FLTR/FLHX, H-D FL Trikes, 16-17 Softails, 16-17 FXDLS, 14-15 FLSTNSE, 13-14 FXSBSE and 11-12 FLSTSE models (6.5” diameter) 1011-2053 For 01-16 Twin Cam w/ Delphi EFI, 99-06 Big Twin w/ CV carb (except 08-16 Dresser, H-D FL Trikes, 16-17 Softails, 16-17 FXDLS, 14-15 FLSTNSE, 13-14 FXSBSE and 11-12 FLSTSE models) (8” diameter) 1011-3628 Repl. black air filter element REPLACEMENT AIR FILTERS • Replacement larger-profile red air filter elements for original-style LA Choppers Air Cleaner Assembly kits and Affliction Air Cleaners and for current air cleaners using the new-style low-profile black air filter element • Made in the U.S.A. 1011-2052 PART # DESCRIPTION FOR 17-21 M-EIGHT (114”/117”) 0903-1677 4.016” bore x 4.5” stroke , 114” cu. in., 11.0:1 compression FOR 17-21 M-EIGHT (114”/117”) (CONT) 0903-1678 4.075” bore x 4.5” stroke , 117” cu. in., 11.1:1 compression 0903-1679 4.080” bore x 4.5” stroke , 118” cu. in., 11.3:1 compression 0903-1680 4.135” bore x 4.5” stroke,, 121” cu. in., 11.3:1 compression PART # DESCRIPTION FOR 17-21* M-EIGHT CVO (117”) 0903-1674 4.060” bore x 4.5” stroke , 117 cu. in, negative dome (-3.5cc) 11.0:1 compression 0903-1675 4.125” bore x 4.5” stroke , 121 cu. in, negative dome (-6.0cc) 11.0:1 compression 0903-1676 4.250” bore x 4.5” stroke , 124 cu. in, negative dome (-9.8cc) 11.0:1 compression BLACK EDITION PISTON KITS FOR M-EIGHT • Features ArmorX™ piston coating for superior protection in extreme conditions and reduced wear • ArmorFit™ skirt coating auto-adjusts to the cylinder wall so there’s no need to measure clearance; provides smooth, quiet, trouble-free operation • Dome design for improved flame travel to maximize air/fuel burn efficiency • High compression for added power • Superfinish piston pin reduces friction and improves scuff resistance • Enhanced pin oiling for improved lubrication and reduced friction • Augmented ring land details improve ring seal and function • Dedicated rings for precise fit, improved compression and oil control • Fits OEM and Screamin’ Eagle cylinder heads (unless noted) • Kit includes two pistons, rings, piston pins and circlips • Made in the U.S.A. 0903-1677
MARCH 2022 THE DRAG SPECIALTIES dragspecialties.com 6 GASKET, SEAL AND O-RING DISPLAY FOR M-EIGHT® MOTORS • Complete four-color display features gaskets, seals and O-rings for M-Eight® motors • Displays are made from a 20 mil-thick flexible vinyl and come with all necessary hooks, clamshells and a complete listing of all gaskets, seals and O-rings necessary • Mounts easily on any 1/8” or 1/4” pegboard • Display is designed so that three 48” W X 32” H displays will fit on a single sheet of 4’ x 8’ pegboard • Gaskets, seals and O-rings are not Included; a list is furnished to allow you to stock the products that you desire • Made In the U.S.A. NOTE: GASKETS ARE NOT INCLUDED. TO STOCK YOUR BOARD FOR INITIAL SETUP AT TIME OF ORDER, THE FOLLOWING GASKETS ARE SUGGESTED. OEM # DESCRIPTION JAMES GASKET PART # COMETIC PART # 11132A O-ring, push rod cover, middle 0935-0115 0935-0170 11145A O-ring, push rod cover, lower 0934-0116 0935-0150 11289A O-ring oil return/crank pos. sensor DS-173206 0935-0153 11293 O-ring, p-rod cover, upper/oil pump inner DS-173210 0935-0148 11000134 Oil seal, sprocket shaft 0935-0934 0935-0998 11900010 O-ring, plug/check valve 0935-0988 0935-0997 11900090 O-ring coolant manifold 0935-0986 0935-0990 16500332 Cylinder base gasket 0934-5964 0934-6319 18100044 Valve seal 0935-0979 0935-0991 25700362 Gasket, lifter cover 0934-5965 0935-5933 25700370 Gasket, cam cover 0934-5968 0934-5934 27300082 Throttle body seal - 0935-1181 OEM # DESCRIPTION JAMES GASKET PART # COMETIC PART # 29000149 Air cleaner gasket 0935-6313 0934-1337 11900092 O-ring, oil return tube 0935-0987 0935-1000 11900103 O-ring, oil pump outer 0935-0989 0935-0999 11900116 O-ring, breather assembly 0935-0985 0935-0975 11900172 O-ring, oil pressure switch - - 16500599 Gasket, head 117, 4.075” bore - 0934-5921 16500305 Gasket head 114, 4.016” bore - 0934-5918 16500326 Gasket head, 107, 3.937” bore 0934-5963 0934-5916 25700372B Gasket, rocker box cover 0934-5966 0934-5942 25700425 Gasket, rocker box, lower 0935-0978 0934-5950 25700433 Gasket, piston jet 0934-5967 0934-5935 62400205 Seal, oil pump - 0935-1181 27300087 Intake manifold seal 0935-0980 0935-0992 PART # DESCRIPTION FOR 17-21 M-EIGHT® MOTORS 0934-6923 Gasket, seal and O-ring display REPLACEMENT CLUTCH GASKET • High-quality product for long-term reliability • Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle • Replaces OEM# 25701080 • Sold in 5-pack • Made in the U.S.A. PART # DESCRIPTION 0934-6535 For 18-21 M-Eight Softail models WAVE® REAR BRAKE ROTORS • Made from 420 high-carbon stainless Tier-1 steel • Laser-cut, never stamped • Individually heat-treated and double-disc parallel ground to ensure perfect flatness • WAVE® design allows for lower operating temperatures at extreme conditions • WAVE® design is much lighter than a stock rotor NOTE: For maximum braking performance and rotor longevity, Galfer recommends using Galfer brake pads with Galfer rotors. See page 1415 in 2021 Drag Specialties FatBook for the complete line of Galfer brake pads. DESCRIPTION STYLE PART # For 08-19 FLHT/FLHR/FLTR/FLHX Full-floating w/ gold carrier 1710-4203 For all 00-17 Big Twin, 00-10 XL models (except V-Rod, 08-17 FLHT/ FLHR/FLHX/FLTR and H-D FL Trike) Solid-mount 141921 1710-4202 1710-4203
MARCH 2022 THE DRAG SPECIALTIES 7 dragspecialties.com RACE SERIES® OIL SYSTEM PACKS FOR M-EIGHT • Includes Fueling’s® High Flow billet camplate made from 7075 aluminum, which is 50% harder and stronger than the factory or Feuling OE+ camplates • Increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil portholes throughout the camplate to the portholes in the engine case, which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings • Feuling oil pumps are bench tested, the relief valve is seated and sealed to a minimum of 30 psi with full pop off at 55-60 psi • Increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function • Fueling® oil pump and camplate combination eliminates common pressure and scavenge issues associated with the factory oiling systems • Feuling M-Eight oil pumps have the groove machined on the back cover to accept the factory crank bearing seal • Quieter and smoother engine operation • Increase oil pressure, scavenge volume and engine oil flow • 42% more scavenge volume with port sizing, matched passages and holes to the engine case • 68% more oil volume to the crankshaft and connecting rod bearing • 15-25 degree cooler engine temperatures • 15-30 degree cooler oil temperatures • 10-30 more psi of oil pressure • M-Eight Twin-Cooled™ motor oil pump specs: 30% more pressure gear volume over stock and 53% more scavenge gear volume over stock • M-Eight Oil-Cooled motor pump specs: 27% more pressure and scavenge gear volume over stock • Reduces wet sumping, blowby and oily air cleaners • Test results show 2 HP gain and 2 ft/lbs of torque gain to the rear wheel on M-Eight • Includes a Race Series® oil pump, Race Series® short- travel hydraulic roller lifters, High Flow camplate and cam installation kit, cam bearing, cam/crank bolts and washers, engine and fastener assembly lube • Billet 7075 aluminum oil pump which is 50% harder and stronger than the factory pump holding tighter tolerances under temperature • Race Series® oil pumps feature increased scavenge side kidney port volume over HP+ oil pumps • Race Series® short-travel hydraulic lifters have .115” of total travel and will increase rpm by decreasing valve float and valve-train harmonics while maintaining a quiet engine • The travel reduction reduces the amount of oil that is required to fill the inside of the lifter, which reduces oil aeration inside the lifter on steep, fast action high lift camshaft lobes • Made in the U.S.A. NOTE: Optional Fueling X ARP bolt kit available for the High Flow camplate PART #0932-0192 and HP+ or RS oil pump combo. See PART #2401-0993, optional ARP oil pump bolts do not use washers. NOTE: Feuling test results show as much as 50% reduction of engine sump oil level. NOTE: M-Eight engines must check clearance on front exhaust lifter to camshaft flange fit. PART # DESCRIPTION 0932-02931, 2 For 17-21 M-Eight oil-cooled motors w/ gear or chain drive 0932-02941, 2 For 17-21 M-Eight Twin-Cooled™ motors w/ gear or chain drive 1 Block-off plate PART #0932-0036 required when using gear drive cams. 2 Use with short-travel pushrods PART #0928-0114 on stock base circle camshafts with Feuling short-travel lifters (includes Feuling grinds 405, 465, 472, 508, 521 and 592). 0932-0293 0932-0294
MARCH 2022 THE DRAG SPECIALTIES dragspecialties.com 8 RACE SERIES® OIL SYSTEM PACKS FOR TWIN CAM • Quieter and smoother engine operation • Increase oil pressure, scavenge volume and engine oil flow • 25-35 degree cooler engine temperatures • 15-30 degree cooler oil temperatures • 15-30 more psi of oil pressure • Eliminate wet sumping, blowby and oily air cleaners • Test results show 3 horsepower gain and 4 ft./lb. of torque gain to the rear wheel • Billet 7075 aluminum oil pump is 50% harder and stronger than the factory pump; holds tighter tolerances under temperature • Includes Race Series oil pump, Race Series short-travel hydraulic roller lifters, high flow camplate and cam installation kit • Race Series short-travel hydraulic lifters have .115” of total travel and will increase rpm by decreasing valve float and valve-train harmonics while maintaining a quiet engine • The travel reduction reduces the amount of oil that is required to fill the inside of the lifter, which reduces oil aeration inside the lifter on steep, fast action high lift camshaft lobes NOTE: Optional Feuling x ARP oil pump/camplate bolt kit available PART #2401-0993. PART # DESCRIPTION 0932-02911, 2 For 07-17 Twin Cam and 06 Dyna w/ gear or chain drive 0932-02892 For 99-06 Twin Cam (except 06 Dyna) w/ gear driven cams 0932-02902 For 99-06 Twin Cam (except 06 Dyna) w/ chain driven cams 0932-02922, 3 For 99-06 Twin Cam (except 06 Dyna) w/ chain drive conversion camplates upgrade to 07-17 Hydraulic tensioners 1 Gear Drive cam systems require block-off plate kit PART #0932-0036. 2 Use with short-travel pushrods PART #0928-0116 on stock base circle camshafts (Feuling 525, 543 and 574 grinds) and PART #0928-0117 on small base circle camshafts (Feuling 594 and 630 grinds). 3 Conversion camplates use 99-06 style camshafts; oil system pack requires separate purchase of hydraulic chain drive tensioners, chains, sprockets and spacers. 0932-0290 0932-0291 RACING VALVE SPRING KITS* • Kits are designed for maximum performance • Features interference-wound, double-chrome silicone springs and H.T. steel base washers • Available in a complete set for one engine • Includes springs, H.T. steel keepers, H.T. steel or titanium spring retainers and red Viton® valve seals • Made in the U.S.A. PART # DESCRIPTION FOR 05-17 88”/96”/103” TWIN CAM, 04-21 XL (EXCEPT 21 SPORTSTER S/RH1250S), 09-12 XR1200, 03-10 BUELL XB9/XB12 0926-3347 .650” lift (seat pressure 185 lb.) (steel spring retainers) 0926-3349 .650” lift (seat pressure 185 lb.) (titanium spring retainers) PART # DESCRIPTION FOR 05-17 88”/96”/103” TWIN CAM, 04-21 XL (EXCEPT 21 SPORTSTER S/RH1250S), 09-12 XR1200, 03-10 BUELL XB9/XB12 (CONT) 0926-3348 .675” lift (seat pressure 185 lb.) (steel spring retainers) 0926-3350 .675” lift (seat pressure 185 lb.) (titanium spring retainers) EZ CLUTCH ADJUSTER UPGRADE KIT • Converts the factory upper clutch cable adjuster to a screw-type style and adds reinforcement to the cable • Works as a upgrade or a repair part for the factory clutch cable adjuster • For use with stock clutch cable or Fat Bagger EZ Clutch Cable Extensions • Threaded split adjuster dimensions: 1/2”-20 threaded PART # DESCRIPTION 0660-0013 For 21 FLHT, FLHTK, FLHX, FLHXS, FLHXSE, FLHTKSE, FLHTCUTG, FLHTCUTGSE, FLTRK, FLTRXS, FLTRX, FLTRXSE, FLHR, FLHRXS w/ cable clutch and 18-21 Softfail 0926-3347
MARCH 2022 THE DRAG SPECIALTIES 9 dragspecialties.com TODD’S CYCLE Founded by custom bike builder and master fabricator Todd Silicato, now located in Hawaii. Todd blends old-school craftsmanship with modern, state-of-the-art engineering and fabrication technologies to create unique and stylish parts and accessories for American motorcycles. 11/2” STRIP HANDLEBARS • Available in chrome or gloss black • Feature 11/2” clamping area • New design uses the stock clamp and hardware • Polished welds • Slotted for internal wiring • Notched for Throttle-By-Wire • Made in the U.S.A. NOTE: Accept H-D OEM heated grips. CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 15-21 FLTRX/FLTRU/FLTRK 0601-5728 0601-5729 10” 32” 9” 5” 0601-5730 0601-5731 12” 32” 9” 5” 0601-5732 0601-5733 14” 331/2” 9” 5” 0601-5728 0601-5731 0601-5733 ADJUSTABLE DROP MIRROR MOUNTS • Black anodized billet construction • Delivers 180° of adjustability for stock batwing fairing-mounted mirrors • Relocates factory fairing-mounted mirrors up, down or even further out PART # DESCRIPTION 0640-1523 For 14-21 FLHX models 0640-1524 For 06-13 FLHX models 0640-1524
MARCH 2022 THE DRAG SPECIALTIES dragspecialties.com 10 41MM TRIPLE TREE • CNC-machined billet aluminum • Stem threads into underside of top triple tree for cleaner look • Available in a 7° smooth design with a Night Series finish • Made in the U.S.A. NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometry must be calculated to determine which degree of rake is most suited for your application. Trees with more than 3° of rake should not be used in stock frame applications. PART # DESCRIPTION 2401-1523 For 00-10 FXST, FXWG and custom applications BRAIDED HIGH EFFICIENCY CLUTCH CABLES • The Industry’s highest quality braid in KarbonFibr • KarbonFibr braid is created from metallic wire with distinct black tone colors, blended and interwoven to mimic the distinct look of carbon fiber • Braid color and weave match on all Magnum control cables and brake lines • Coated with a non-yellowing, crystal-clear outer jacket for exceptional protection against scuffing paint or chrome • Low-effort, high-efficiency cable design meets or exceeds all OE specifications for fitment, construction and endurance • All fittings are polished and chrome or black chrome-plated • Rubber seal in transmission fitting eliminates fluid leaks • Cables are made with anti-friction inner liners and adjuster inserts, plus they are factory lubricated for smooth, consistent, long lasting operation NOTE: Check torque spec on transmission fitting when installing. HOW TO MEASURE CLUTCH CABLES NOTE: Late style cables are measured with the adjuster completely collapsed. KarbonFibr STANDARD LENGTH HIGH EFFICIENCY CLUTCH CABLES FITS MODEL KARBONFIBR HOUSING LENGTH ADJUSTER LOCATION FROM TRANS TRAVEL OEM # SOFTAIL For 18-20 FLFB/S, 18-21 FXBB/S, 20-21 FXST 0652-2379 7011/16” 311/2” 31/8” 37200216 For 18-21 FLSL,18-20 FXBR/S 0652-2377 6611/16” 311/2” 31/8” 37200215 For 20-21 FXLRS 0652-2377 6611/16” 311/2” 31/8” 37200433 For 18-20 FLDE, 18-21 FLSB, 19-20 FXDR/S, 18-21 FXFB/S 0652-2376 6411/16” 311/2” 31/8” 37200219 For 18-21 FLHC/S,18-20 FXLR 0652-2378 6811/16” 311/2” 31/8” 37200218 For 08-11 FLSTSB 0652-2377 6611/16” 311/2” 31/8” 38883-08A PART # DESCRIPTION CHROME 0602-1247 4” 0602-1245 6” 0602-1243 8” 0602-1241 10” PART # DESCRIPTION BLACK 0602-1248 4” 0602-1246 6” 0602-1244 8” 0602-1242 10” HOLESHOT RISER KITS • Constructed of 6061 aluminum • Fit all models with 3.5” center-to-center riser spacing • Work with any standard 1” handlebars • Drilled for internal wiring (except 4” risers) • Base hole tapped for standard 1/2” x 13 mounting bolts (bolts not included) • Sold in pairs with top clamp and hardware • Made in the U.S.A. 0602-1241 0602-1248
MARCH 2022 THE DRAG SPECIALTIES 11 dragspecialties.com FORGED BILLET DRIFT RIMS • All rims are CNC-machined from radial forged 6061-T6 aluminum for maximum road durability and strength-to-weight ratio • Features a rolled rim lip for the custom look and detailed CNC machine work from the center of the hub to the edge of the rim • Rims can be used on both front and/or rear applications when correct hub kit is installed (sold separately) • Rims accept Arlen Ness hub kits (sold separately), which allow full wheels to be assembled in minutes with basic tools • Structurally tested to meet or exceed DOT, JAS and TUV international load ratings NOTE: Arlen Ness hub kits must be purchased separately to install. Please see the 2021 Drag Specialties FatBook or the Drag Specialties/Parts Canada Indian catalogue for required hub kits. DESCRIPTION CHROME BLACK FRONT RIMS 21” x 3.50” 0210-0396 0210-0395 REAR RIMS 18” x 5.50” 0210-0394 0210-0393 ONE-PIECE ALUMINUM WHEELS • Forged wheels place the highest material strength in the same direction as the operating load, creating a light and strong wheel • Features the contour rim lip for a graceful arc from rim to lip NOTE: Models with TPMS will require PART #0360-0056 (sold separately) NOTE: Front wheels listed as fitting 14-21 Dresser models will require the use of PM front brake rotors (3.25” bolt circle). NOTE: 14-21 FLHT/FLHR/FLHX 21” front wheels include fender relocation brackets for use with stock front fenders. REAR AXLE ADJUSTER KIT • 25 mm stainless steel axle • Improves handling and lifespan of belts, chains and tires • Removable rear stand spools • Kit includes rear axle, sliders, adjuster mounts, safety e-clips, axle nut and upper and lower shock mount bolts and spacers • Available in black or gold finishes METHOD DRIVER FLOORBOARDS • CNC-machined billet floorboard bodies • Vibration isolating footrests offer enhanced foot traction through Airtrax style rubber tops that feature a proprietary internal structure engineered specifically to absorb vibration associated with V-twin engines • Extended length for added comfort and more foot room • Dimensions: 18” L x 5.75” W x 1” Thick • Sold in pairs • AirTrax style shift pegs and footpegs are available separately for matching passenger footrests and control arm pegs DESCRIPTION SIERRA FRONT WHEELS 21” x 3.5” for 14-21 FLHT/FLHR/FLHX/FLTRX/ FLTRU/FLTRK w/ ABS (dual disc) 0201-2383 21” x 3.5” for 14-19 FLHT/F LHR/FLHX/FLTRX w/o ABS (dual disc) 0201-2382 REAR WHEELS 18” x 5.5” for 09-21 FLHT/FLHR/FLHX/ FLTRX/FLTRU/FLTRK w/ ABS 0202-2176 18” x 5.5” for 09-19 FLHT/FLHR/FLHX/FLTRX w/o ABS 0202-2175 DESCRIPTION PART # FOR 09-21 DRESSER/TOURING MODELS Black 0214-1991 Gold 0214-1992 PART # DESCRIPTION FOR 99-21 FLT/FLHT/FLHR/FLHX/FLTR/FLTRX/FLTRU/FLTRK , 09-13 H-D FL TRIKE, 00-17 FLST AND 12-16 FLD 1621-1038 Black anodized 1621-1039 Chrome FOR 18-21 FLDE/FLFB/FLFBS/FLHC/FLHCS/FLSL 1621-1040 Black anodized 1621-1041 Chrome 0214-1992 0214-1991 0210-0395 0210-0396 1621-1038 1621-1039
RkJQdWJsaXNoZXIy NDI5NTY=