MARCH 2022 THE DRAG SPECIALTIES dragspecialties.com 8 RACE SERIES® OIL SYSTEM PACKS FOR TWIN CAM • Quieter and smoother engine operation • Increase oil pressure, scavenge volume and engine oil flow • 25-35 degree cooler engine temperatures • 15-30 degree cooler oil temperatures • 15-30 more psi of oil pressure • Eliminate wet sumping, blowby and oily air cleaners • Test results show 3 horsepower gain and 4 ft./lb. of torque gain to the rear wheel • Billet 7075 aluminum oil pump is 50% harder and stronger than the factory pump; holds tighter tolerances under temperature • Includes Race Series oil pump, Race Series short-travel hydraulic roller lifters, high flow camplate and cam installation kit • Race Series short-travel hydraulic lifters have .115” of total travel and will increase rpm by decreasing valve float and valve-train harmonics while maintaining a quiet engine • The travel reduction reduces the amount of oil that is required to fill the inside of the lifter, which reduces oil aeration inside the lifter on steep, fast action high lift camshaft lobes NOTE: Optional Feuling x ARP oil pump/camplate bolt kit available PART #2401-0993. PART # DESCRIPTION 0932-02911, 2 For 07-17 Twin Cam and 06 Dyna w/ gear or chain drive 0932-02892 For 99-06 Twin Cam (except 06 Dyna) w/ gear driven cams 0932-02902 For 99-06 Twin Cam (except 06 Dyna) w/ chain driven cams 0932-02922, 3 For 99-06 Twin Cam (except 06 Dyna) w/ chain drive conversion camplates upgrade to 07-17 Hydraulic tensioners 1 Gear Drive cam systems require block-off plate kit PART #0932-0036. 2 Use with short-travel pushrods PART #0928-0116 on stock base circle camshafts (Feuling 525, 543 and 574 grinds) and PART #0928-0117 on small base circle camshafts (Feuling 594 and 630 grinds). 3 Conversion camplates use 99-06 style camshafts; oil system pack requires separate purchase of hydraulic chain drive tensioners, chains, sprockets and spacers. 0932-0290 0932-0291 RACING VALVE SPRING KITS* • Kits are designed for maximum performance • Features interference-wound, double-chrome silicone springs and H.T. steel base washers • Available in a complete set for one engine • Includes springs, H.T. steel keepers, H.T. steel or titanium spring retainers and red Viton® valve seals • Made in the U.S.A. PART # DESCRIPTION FOR 05-17 88”/96”/103” TWIN CAM, 04-21 XL (EXCEPT 21 SPORTSTER S/RH1250S), 09-12 XR1200, 03-10 BUELL XB9/XB12 0926-3347 .650” lift (seat pressure 185 lb.) (steel spring retainers) 0926-3349 .650” lift (seat pressure 185 lb.) (titanium spring retainers) PART # DESCRIPTION FOR 05-17 88”/96”/103” TWIN CAM, 04-21 XL (EXCEPT 21 SPORTSTER S/RH1250S), 09-12 XR1200, 03-10 BUELL XB9/XB12 (CONT) 0926-3348 .675” lift (seat pressure 185 lb.) (steel spring retainers) 0926-3350 .675” lift (seat pressure 185 lb.) (titanium spring retainers) EZ CLUTCH ADJUSTER UPGRADE KIT • Converts the factory upper clutch cable adjuster to a screw-type style and adds reinforcement to the cable • Works as a upgrade or a repair part for the factory clutch cable adjuster • For use with stock clutch cable or Fat Bagger EZ Clutch Cable Extensions • Threaded split adjuster dimensions: 1/2”-20 threaded PART # DESCRIPTION 0660-0013 For 21 FLHT, FLHTK, FLHX, FLHXS, FLHXSE, FLHTKSE, FLHTCUTG, FLHTCUTGSE, FLTRK, FLTRXS, FLTRX, FLTRXSE, FLHR, FLHRXS w/ cable clutch and 18-21 Softfail 0926-3347
RkJQdWJsaXNoZXIy NDI5NTY=