DIAMONDBACK 2-INTO-1 EXHAUST SYSTEM • Full stainless steel exhaust system with stainless steel header pipe heat shields • Oversized stepped header primary tubes for optimal flow and performance • Header length helps your M-Eight motor make excellent power • 4” OD diameter stainless steel muffler ends before the rear axle • Four exhaust bungs for easy O2 sensor installation and air/fuel monitoring • Computer-aided design and precise header bends for improved ground clearance • Available in a natural or Guardian Black finish • Made in the U.S.A. PART # DESCRIPTION FOR 17-20 FLHT/FLHTK/FLTRK/FLTRU/FLHR/FLHX MODELS (50-STATE) 1800-25421 Stainless steel 1800-25441 Guardian black FOR 17-22 FLHT/FLHTK/FLTRK/FLTRU/FLHR/FLHX MODELS (RACE ONLY) 1800-2543 Stainless steel 1800-2545 Guardian black 1 Exempt per CARB Executive Order (E.O.) K-010-20 for 17-20 Touring models listed. 1800-2543 1800-2544 THE DRAG SPECIALTIES JULY 2022 dragspecialties.com
THE DRAG SPECIALTIES 2 JULY 2022 dragspecialties.com SIDEWINDER 2-INTO-1 EXHAUST SYSTEMS • Increased power and torque • Stainless steel header construction • High-flow catalytic converters • Includes adapters that allow use of wide band or stock O2 sensors • Machined aluminum end cap • Deep performance exhaust note • All necessary mounting hardware included • Made in the U.S.A. NOTE: Not for Trike applications. FOR 17-21 FLHT/FLHR/FLHX/FLTRX/FLTRU PART # DESCRIPTION 1800-25461 Chrome w/ black highlighted machined end cap 1800-25471 Black ceramic w/ black highlighted machined end cap 1 Exempt per CARB Executive Order (E.O.) #K-010-21 for 17-21 Touring models listed. FOR 07-16 FLHT/FLHR/FLTR/FLHX AND FLTRX MODELS PART # DESCRIPTION 1800-25481 Chrome w/ black highlighted machined end cap 1800-25491 Black ceramic w/ black highlighted machined end cap 1 Exempt per CARB Executive Order (E.O.) #K-010-21 for 07-16 FL Touring models listed.. 1800-2546 1800-2549
THE DRAG SPECIALTIES 3 JULY 2022 dragspecialties.com BACKSLASH 450 SLIP-ON MUFFLERS* • Designed specifically for the Milwaukee M8 Touring models • 4.5” mild-steel spin-formed round muffler bodies • LS275 baffles designed for an intimidating, bold rumble • Angle of the tips match the angle of the OEM saddlebags • Matte black finish • Mounting hardware and instructions included • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION 1801-1500 For 17-22 FLHT/FLHX/FLTRX/FLHR models (except 17-22 H-D Trike) FUELPAK FP4* • FP4 upgrades include the latest Bluetooth® technology, smaller size, upgraded app and tuning capability for new Harley-Davidson® models • Gives you the power to control every aspect of your motorcycle’s tune, view live sensor data, read and clear trouble codes, utilize a live sensor data display and support - all from your smartphone • Performance Data feature allows you to record your ride, look at all available sensors in the created chart and see a map of your ride recorded with your phone’s onboard GPS • LEDs have been simplified so you know exactly what is going on between the FP4 and your motorcycle • Vast library of available dyno-tuned maps • All necessary hardware and instructions included • Made in the U.S.A. PART # DESCRIPTION 1020-3513 For 21-22 FLHT/FLHX/FLHR/FLTRX/H-D FL Trike, 21-22 FXBB/S/ FXFB/S/FXLR/S/FXST/FLHC/C/FLFB/S/FLSL/FLSB (including CVO models) VO2 FALCON AIR INTAKES* • Sleek forward-facing 90° intake design • Race-proven intake tube available in chrome, matte black, forged carbon fiber and weaved carbon fiber • CNC-machined billet aluminum backing plate, breather stand-offs and flange cover • Integrated breather assembly using 12-point stainless Banjo bolts • Washable high-flow oiled-media air filter with stamped V&H logo • Matched induction module cover on throttle-by-wire models • Accessory pre-filter rain sock available • Mounting hardware and instructions included • Made in the U.S.A. PART # DESCRIPTION FOR 17-21 FLHT/FLHR/FLHX/FLTRX/FLTRU/H-D FL TRIKES 1010-2946 Chrome 1010-2942 Matte black 1010-2950 Forged carbon fiber 1010-2954 Weaved carbon fiber FOR 08-16 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKES, 16-17 FXDLS, 16-17 SOFTAILS, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE 1010-2947 Chrome 1010-2943 Matte black 1010-2951 Forged carbon fiber 1010-2955 Weaved carbon fiber FOR 99-07 FLHT/FLHR/FLHX/FLTR (EXCEPT 99-01 TOURING FUEL INJECTION AND MODELS W/ LOWER FAIRINGS), 00-15 SOFTAILS (EXCEPT 11-15 CVO MODELS), 99-17 DYNA (EXCEPT 16-17 FXDLS) 1010-2948 Chrome 1010-2944 Matte black 1010-2952 Forged carbon fiber PART # DESCRIPTION FOR 99-07 FLHT/FLHR/FLHX/FLTR (EXCEPT 99-01 TOURING FUEL INJECTION AND MODELS W/ LOWER FAIRINGS), 00-15 SOFTAILS (EXCEPT 11-15 CVO MODELS), 99-17 DYNA (EXCEPT 16-17 FXDLS) (CONT) 1010-2956 Weaved carbon fiber FOR 18-21 SOFTAILS 1010-2946 Chrome 1010-2942 Matte black 1010-2950 Forged carbon fiber 1010-2954 Weaved carbon fiber FOR 91-21 XL (EXCEPT 21 SPORTSTER S/RH1250S) 1010-2949 Chrome 1010-2945 Matte black 1010-2953 Forged carbon fiber 1010-2957 Weaved carbon fiber ADDITIONAL COMPONENTS 1011-4635 Rain sock for VO2 falcon air intakes 1010-2942 1010-2946 1010-2953 1011-4635
THE DRAG SPECIALTIES 4 JULY 2022 dragspecialties.com UNIVERSAL WATERPROOF HEAVY-DUTY 4-CHANNEL AMPLIFIER • Bluetooth® audio • RCA audio input connectors • 4 x 40-watt max power rating • 4 x 20-watt RMS • 4-8 ohm stable • Input sensitivity: 600mV • Frequency response: 20Hz - 20kHz • Epoxy potted enclosure • 15 amp fuse in waterproof holder • Corrosion and water resistant PART # DESCRIPTION 4401-0266 Waterproof heavy-duty 4-channel amplifier 3” UNIVERSAL MOUNT TWO-WAY SPEAKERS • 60W (30W RMS) max handling power • Waterproof bridged woofer/tweeter • Polypropylene cone • Ferro fluid cooling on tweeter • Rubber suspension/surround • Four-layer ASV voice coil • U-brackets included • Rear AMPS mounting pattern for additional mounting options • Fixed grilles • Corrosion and UV resistant • Dimensions: 4.1” W x 4.1 H x 3.11” D; 4.37” W x 4.33” H x 3.11” D with bracket • Sold in pairs PART # DESCRIPTION 4405-0875 3” universal mount two-way speakers PART # DESCRIPTION BLACK 0602-1163 6" tall PART # DESCRIPTION BLACK 0602-1157 6" tall RISER KITS • Made with 6061-T6 aluminum • 1” clamping area • 31/2” center-to-center riser spacing • Top clamp and hardware included included • Hardware is 3/8-16 thread, 1.5” L • Straight or pullback options • Available with a raw or black finish • Made in the U.S.A. 0602-1157 0602-1163 PULLBACK RISERS (1.5” PULLBACK) STRAIGHT RISERS
THE DRAG SPECIALTIES 5 JULY 2022 dragspecialties.com HEATED ROAD SOFA SEATS • Two-level heat adjustment that connects easily to bike’s electrical system • Independently controlled heating elements for rider and passenger • Brightly colored LEDs indicate level of heat • Seat’s styling and function is unaffected by switches or wiring • GelCore™ in front and rear reduces tailbone pressure and increases circulation and comfort for both driver and passenger • Tall lumbar support and wide driver saddle support the back and legs for superior comfort, while the streamlined nose improves the rider’s reach to the ground • Available with or without driver’s backrest • For the full line of Saddlemen Heated Road Sofa seats, see the 2022 Drag Specialties Fatbook catalogue • Made in the U.S.A. PART # DESCRIPTION FOR 09-22 FLHTCUTG 0801-1406 W/o driver’s backrest 0801-1405 W/ driver’s backrest 0801-1405 ROAD SOFA SEATS • GelCore™ in front and rear reduces tailbone pressure and increases circulation and comfort for both driver and passenger • Tall lumbar support and wide driver saddle support the back and legs for superior comfort, while the streamlined nose improves the rider’s reach to the ground • LS seats come with fitted rain cover specially designed to protect the seat from water and dirt • Available with or without driver’s backrest • For the full line of Saddlemen Road Sofa seats, see the 2022 Drag Specialties Fatbook catalogue • Made in the U.S.A. PART # DESCRIPTION FOR 09-22 FLHTCUTG 0801-1403 W/o driver’s backrest 0801-1404 W/ driver’s backrest 0801-1404
THE DRAG SPECIALTIES 6 JULY 2022 dragspecialties.com ROAD SOFA CF TOUR-PAK® PAD COVERS • Constructed from contrasting carbon fiber (CF) weave and SaddleHyde™ • Perfectly matches Saddlemen Road Sofa CF seats • Made in the U.S.A. PART # DESCRIPTION FOR 90-13 FLHR/FLHT/FLHX/FLTR 0801-1388 Tour-Pak backrest pad cover 0822-0499 Chopped Tour-Pak backrest pad cover 0801-1388 0822-0499 ROAD SOFA TOUR-PAK® PAD AND BACKREST PAD COVERS • SaddleHyde® construction • Perfect match for Saddlemen Road Sofa seats • Made in the U.S.A. PART # DESCRIPTION FOR 14-22 FLHR/FLHT/FLHX/FLTR/FLTRU/FLTRK/FLTRX 0822-0498 Tour-Pak backrest pad 0822-0496 Tour-Pak backrest pad cover PART # DESCRIPTION FOR 90-13 FLHR/FLHT/FLHX/FLTR 0822-0497 Tour-Pak backrest pad cover 0822-0500 Chopped Tour-Pak backrest pad cover 0822-0496 0822-0497 0822-0500 0822-0498
THE DRAG SPECIALTIES 7 JULY 2022 dragspecialties.com POWER VISION 4* • Flash tunes to your ECU – no setup required, just create and account, select your tune, flash and enjoy the ultimate ride • Access to a vast database of pre-loaded tunes for different configurations • Easily download and manage pre-loaded and custom tunes • Record real-time engine data and display in WinPEP 8 Data Center • Optimized for remote tuning so you can easily ride, record and share data logs and tunes • Read, review, clear and share diagnostic trouble codes (DTCs) with built-in descriptions • Supports licensing additional vehicles • Return to stock at any time, your original factory tune is safely backed up on the cloud and on your phone • See Dynojet website http://www.dynojet.com/powervisiontune-license-programs.aspx for information about purchasing additional Power Vision tune licenses. MANUFACTURER’S NOTE: All Power Vision returns and/or adjustments must be made directly with Dynojet Research. The Power Vision may be used on any bike to read and clean trouble codes. PART # DESCRIPTION 1020-3524 For 14-20 FLHT/FLHX/FLHR/FLTR/FLTRX/FLTRU, 11-20 Softail, 12-17 Dyna, 14-21 XL and 15-20 Street models BLACK FLANGE ADAPTERS • Rubber flange adapters fit 42mm and 45mm spigot-type carburetors • PART #1013-0166 has slotted mounting holes that are 70-75mm on center; ID of 45mm • PART #1013-0167 has slotted mounting holes that are 70-75mm on center; ID of 48mm • Includes clamp • Flared design • Sold individually • Made in Japan PART # DESCRIPTION 1013-0166 42mm 1013-0167 45mm OXYGEN SENSOR BYPASS KIT* • Kit allows you to bypass the OEM O2 sensors when changing from the stock exhaust • Fits 2010-2022 OEM sensor wiring harness PART # DESCRIPTION 2120-1169 O2 sensor bypass kit
THE DRAG SPECIALTIES 8 JULY 2022 dragspecialties.com MAGNUM SHIELDING Magnum Shielding is recognized worldwide as the premier manufacturer of braided brake lines and control cables. Their Quick-Connect braided upper clutch cables are a easily installed upgrade that let you extend the length of your OEM clutch cable without the hassle of having to drain the transmission fluid. The cable extensions are available in braid and color weave options to match all Magnum control cable and brake line styles. Sterling Chromite Black pearl Polish stainless KarbonFibr QUICK CONNECT BRAIDED UPPER CLUTCH CABLES • Quick Connect braided upper clutch cables economically replace the OE upper cable section on 2021 Touring models • Easily and quickly connects to the existing lower cable section via a durable threaded metal adjuster • Significantly reduces installation time, plus there’s no need to drain transmission fluid • Unique design reuses OE cover and housing parts • Quick Connect cables feature the industry’s highest quality braid in four color choices to complement your bike: Sterling Chromite®, Black Pearl, KarbonFibr and Polished Stainless • KarbonFibr braid is created from metallic distinct black tone colored wire, blended and interwoven to mimic the distinct look of carbon fiber • Braid color and weave match on all Magnum control cables and brake lines • Crystal-clear outer jacket will never discolor and provides exceptional protection against scuffing paint and chrome • Chrome or black chrome-plated handlebar fittings • Low-effort, high-efficiency cable design meets or exceeds OE specifications for fitment, construction and endurance • Upper cables are made with anti-friction inner liners and are factory lubricated for smooth, consistent, long lasting operation • Assembled in the U.S.A. STOCK LENGTH FITS MODEL STERLING CHROMITE BLACK PEARL KARBONFIBR POLISHED STAINLESS TOTAL LENGTH TRAVEL OEM # For 21 FLHT/ FLHTK/FLHTKS/ FLHX/FLHXS 0652-2781 0652-2787 0652-2799 0652-2793 39” 25/16” 37200441 ALTERNATE LENGTH STERLING CHROMITE BLACK PEARL KARBONFIBR POLISHED STAINLESS TOTAL LENGTH TRAVEL FOR 21 FLHT/FLHTK/FLHTKS/FLHX/FLHXS 0652-2781 0652-2787 0652-2799 0652-2793 39” 25/16” 0652-2782 0652-2788 0652-2800 0652-2794 41” 25/16” 0652-2783 0652-2789 0652-2801 0652-2795 43” 25/16” 0652-2784 0652-2790 0652-2802 0652-2796 45” 25/16” 0652-2785 0652-2791 0652-2803 0652-2797 47” 25/16” 0652-2786 0652-2792 0652-2804 0652-2798 49” 25/16”
THE DRAG SPECIALTIES 9 JULY 2022 dragspecialties.com HYDRO CLUTCH • ”Easy Clutch” specifically designed for V-Rod models with hydraulic clutches • Better clutch response, less pull effort • Zero maintenance • Easy and invisible mounting • Made in Germany NOTE: Registered Design # 202018107185. PART # DESCRIPTION 1130-0661 For 02-17 V-Rod models ROCKER SHAFT KITS • Designed with strength in mind • Over double the strength of factory shafts • Precision ground from 4140HT steel • Gas nitrided and final surface treated • Kits include the shafts and ARP bolts; unless noted • Recommended for engines running higher lift camshafts and heavier valve spring pressures • Twin Cam stock replacement • Made in the U.S.A. PART # DESCRIPTION 0927-0045 For 01-16 Touring, 02-17 Softail and 01-17 Dyna models (includes four shafts and eight 5/16”-18 x 21/2” bolts) 0927-0044 For 99-00 Touring, 00-01 Softail and 99-00 Dyna models (includes four shafts and eight 5/16” - 18 x 23/4”bolts) 0927-0043 For 99-17 Twin Cam models (includes four shafts only) VALVE LOCK KEYS • Machined steel locks • Standard height groove 5/16” valve stems, 7° with square groove • Made in the U.S.A. PART # DESCRIPTION 0926-3368 For 84-04 Big Twin and 86-03 XL (5/16” valve stems); repl. OEM #18229-83 VALVE SPRING SEAT SHIMS • Set valve spring open height to match camshaft lifts for optimum valve-train stability and performance • Includes four 0.060” thick shims, four 0.030” thick shims and four 0.015” thick shims with 1.500” OD (outside diameter) and 0.645” ID (inside diameter) • Made in the U.S.A. PART # DESCRIPTION 0930-0237 For 84-17 Big Twin and 86-17 XL 0927-0043 0927-0045
THE DRAG SPECIALTIES 10 JULY 2022 dragspecialties.com DERBY COVERS • Die-cast construction with a domed design • Mounting hardware included • See the 2022 Drag Specialties FatBook for the complete line of derby covers PART # DESCRIPTION FOR 18 FLSB, 19-21 SOFTAIL MODELS AND 18 SOFTAIL MODELS EQUIPPED W/ NARROW PROFILE PRIMARY COVER 1107-0662 Chrome 1107-0659 Matte black 1107-0660 Gloss black 1107-0661 Wrinkle black 1107-0659 1107-0660 1107-0661 1107-0662 SCALLOP DERBY COVER • Direct replacements for stock derby covers on OEM primaries • Machined Performance Machine logo • Black Ops™ finish features smooth black anodized surface • Hardware and gasket included • Made in the U.S.A. PART # DESCRIPTION 1107-0681 For 16-21 Dressers and HD FL Trikes, 15 FLHTCUL/FLHTKL APEX BLACK OPS™ FUEL DOOR • Add a custom look to your tank • Billet aluminum construction • Made in the U.S.A. PART # DESCRIPTION 0703-0877 For 08-21 FLHT/FLHX/FLTR AND H-D FL Trikes (except FLRT) PIMARY SHAFT PLUG KIT FOR MID CONTROLS • Plugs the opening on the primary case when switching to Performance Machine mid controls • Designed for use on M-Eight Softail models without floorboards • Clean, finished look that adds style to the mid controls setup • Mid Controls kits sold separately (see page 1746 of the 2022 Drag Specialties FatBook) • Made in the U.S.A. PART # DESCRIPTION 1602-1394 Black anodized SWITCH HOUSING KIT AND MIRROR MOUNT FOR RADIAL HYDRAULIC CLUTCH AND BRAKE MASTER CYLINDERS • Designed for use with Performance Machine Radial hydraulic master cylinders • Made in the U.S.A. PART # DESCRIPTION 0616-0375 Hydraulic brake/clutch switch housing kit 0641-0259 Mirror mount 0616-0375 0641-0259
THE DRAG SPECIALTIES 11 JULY 2022 dragspecialties.com HOT SHOT SERIES REGULATOR/RECTIFIER • Made with Mosfet technology, which is great for sustained riding and sustained idling because it dissipates the heat • Direct replacement comes with the factory plug for an easy install PART # DESCRIPTION 2112-1629 For 89-99 Evolution Big Twin; repl. OEM #74519-88A ENFORCER/PRODIGY ONE-PIECE FRONT ROTORS • Bolt-on replacement for 14-22 Harley Davidson Touring models with Prodigy or Enforcer wheels • Stainless steel, 11.8” spoke-mounted rotor with 5 x 6.7” bolt pattern • Made in the U.S.A. • Sold each NOTE: Fits HD Aggressor front wheels when used with Enforcer-style bolt hats. NOTE: PART #1720-0065 Gold+ brake pads are recommended with these rotors. PART # DESCRIPTION FOR 14-22 FLHT/FLHR/FLHX/FLTRX MODELS W/ PRODIGY OR ENFORCER WHEELS 1710-4285 Machine 1710-4286 Black 1710-4287 Gold 1710-4285 1710-4286 1710-4287 D2 MULTI-FUNCTION METER • High-quality plug & play meter equipped with 8-color changeable LCD display • Features a tachometer/speedometer combination with a programmable shift light and includes gear indicator • Features vital reads such as engine temperature, battery voltage, tire pressure and a complete system of indicator lights to monitor vital signs on bike • Plugs directly into the stock harness and works directly with CANBUS system • Display range: 0-124 mph • Effective temperature range: -4°F-185°F (-20°C-85°C) • 12VDC battery voltage • Measures 37/16” L x 11/16” W x 25/8” H PART # DESCRIPTION 2210-0607 For 18-22 FXBB/FXBR/FXST models
THE DRAG SPECIALTIES 12 JULY 2022 dragspecialties.com LEATHER LEVER FRINGE • Leather, lace-up lever covers for style and comfort • Measure 12” L • Sold in pairs PART # 0618-0001 PART # DESCRIPTION FOR 99-18 BIG TWIN (EXCEPT 18 FLSB, 16-18 DRESSERS, 15 FLHTCUL/FLHTKL) 1107-0546 Chrome w/ black skull PART # DESCRIPTION FOR 04-21 XL (EXCEPT 21 SPOTSTER S/RH1250S) 1107-0551 Black w/ chrome skull SPLIT SKULL DERBY COVERS • Die-cast construction • Available in chrome or black • Matches other Drag Specialties Split Skull covers NOTE: 06 Dyna Glide and all 07-18 applications (except 16-18 Dressers, 15 FLHTCUL/FLHTKL, 18 FLSB) will require the use of gasket PART #s 0934-0289 or 0934-0788. 1107-0551 1107-0546 PART # DESCRIPTION FOR 16-21 FLHT/FLHX/FLTRS/FLTRX/FLTRU/FLTRK/FLHTCUTG/FLRT, 15 FLHTCUL/FLHTKL 1107-0558 Wrinkle black DERBY COVERS • Die-cast construction with a domed design • Includes mounting hardware NOTE: 06 Dyna Glide and all 07-18 Big Twin (except 16-18 Dressers, 15 FLHTCUL/FLHTKL, 18 FLSB) applications will require the use of gasket PART #s 0934-0289 or 0934-0788.
RkJQdWJsaXNoZXIy NDI5NTY=