DESCRIPTION PISTON KIT REPL. RINGS REPL. WRIST PIN (EA.) REPL. CIRCLIP (PR.) FOR 99-17 TWIN CAM 88”/96”/103” BORED TO 1746CC (106 CU. IN.) WITH 4.375” STROKE CRANK (EXCEPT TWIN COOLED MODELS) VM-RING PACKAGE (10:1 COMP. FLAT TOP) Std. 0903-11701, 3, 4 - - - FOR 12-17 TWIN CAM 103 AND 07-13 TWIN CAM 96 BORED TO 1691CC (103 CU. IN.) VM-RING PACKAGE (9:1 COMP. REVERSE DOME) ALSO FITS 99-06 TWIN CAM 88 WITH 4.375” STROKER CRANK Std. 0910-52011, 3, 4 0912-0285 - W5752 FOR 12-17 TWIN CAM 103 AND 07-13 TWIN CAM 96 BORED TO 1691CC (103 CU. IN.) VM-RING PACKAGE (10.5:1 COMP. REVERSE DOME) ALSO FITS 99-06 TWIN CAM 88 WITH 4.375” STROKER CRANK Std. 0910-52921, 3, 4 0912-0285 - W5752 .010” 0910-52931, 3, 4 - - W5752 FOR 12-17 TWIN CAM 103 AND 07-13 TWIN CAM 96 BORED TO 1691CC (103 CU. IN.) X-RING PACKAGE (9:1 COMP. REVERSE DOME); ALSO FITS 99-06 TWIN CAM 88 WITH 4.375” STROKE CRANK Std. - 0912-0145 - W5752 FOR 99-06 TWIN CAM 88 BORED TO 1550CC (95 CU. IN.) VM-RING PACKAGE (9:1 COMP.) Std. 0903-07911 0912-0285 - W5752 FOR 99-06 TWIN CAM 88 BORED TO 1550CC (95 CU. IN.) VM-RING PACKAGE (10.5:1 COMP.) NOTE: REQUIRES SCREAMIN’ EAGLE MODULE ON FUEL-INJECTED MODELS Std. 0903-07871 0912-0285 - W5752 .010” 0903-07891 - - W5752 .020” 0903-07901 - - W5752 FOR 86-21 883 XL BORED TO 1200CC (REVERSE DOME) (9.5:1 COMP.) X-RING PACKAGE Std. K16552 3497X - W5731 .010” K16562 - - W5731 .020” K16572 - - W5731 HIGH-PERFORMANCE FORGED PISTON KITS • Wiseco’s high-tech manufacturing ensures greater operating strength and lower expansion at high temperatures • Kit includes forged pistons with ArmorGlide™ coated skirts, rings, retainer clips, chrome piston pins • Twin Cam pistons have ArmorPlating which improves ring seal, eliminates ring micro-welding and improves the piston’s ability to defend against detonation damage • Piston kits are available with X-Ring package (.062 top ring, .062 compression ring and .158 oil ring) or VM-rings (1.2mm steel, positive twist, gas-nitrided top ring, 1.2mm cast iron, taper under-hook scraper ring and 2.0mm three-piece, flex-vent oil ring with steel chrome-faced rails); VM-rings, X-Rings and XC-Rings will not interchange • 103” kits require cylinder boring; 110” kit requires big-bore cylinders and case boring; recalibration required • Pistons are made in the U.S.A. NOTE: Replacement rings include rings for one piston only. WARNING: Wiseco pistons that use VM-rings can only be fitted with Wiseco VM-rings; Wiseco pistons that use X-rings can only be fitted with Wiseco XC-rings. PART # DESCRIPTION FOR 17-21 M-EIGHT (114”/117”) 0903-1677 4.016” bore x 4.5” stroke , 114” cu. in., 11.0:1 compression 0903-1678 4.075” bore x 4.5” stroke , 117” cu. in., 11.1:1 compression 0903-1679 4.080” bore x 4.5” stroke, 118” cu. in., 11.3:1 compression 0903-1680 4.135” bore x 4.5” stroke,, 121” cu. in., 11.3:1 compression PART # DESCRIPTION FOR 17-21 M-EIGHT CVO (117”) 0903-1674 4.060” bore x 4.5” stroke, 117 cu. in, negative dome (-3.5cc) 11.0:1 compression 0903-1675 4.125” bore x 4.5” stroke, 121 cu. in, negative dome (-6.0cc) 11.0:1 compression 0903-1676 4.250” bore x 4.5” stroke, 124 cu. in, negative dome (-9.8cc) 11.0:1 compression BLACK EDITION PISTON KITS FOR M-EIGHT • Features ArmorX™ piston coating for superior protection in extreme conditions and reduced wear • ArmorFit™ skirt coating auto-adjusts to the cylinder wall so there’s no need to measure clearance; provides smooth, quiet, trouble-free operation • Dome design for improved flame travel to maximize air/fuel burn efficiency • High compression for added power • Superfinish piston pin reduces friction and improves scuff resistance • Enhanced pin oiling for improved lubrication and reduced friction • Augmented ring land details improve ring seal and function • Dedicated rings for precise fit, improved compression and oil control • Fits OEM and Screamin’ Eagle cylinder heads (unless noted) • Kit includes two pistons, rings, piston pins and circlips • Made in the U.S.A. 1 Includes top-end gasket kit. 2 08-21 models will require the use of 1200cc cylinders. 3 Fits 11-17 Screamin’ Eagle heads. 4 Kit includes ArmorX/A utoFit pistons. 0903-1674 0903-1677 THE DRAG SPECIALTIES AUGUST 2022 dragspecialties.com
AUGUST 2022 THE DRAG SPECIALTIES dragspecialties.com 2 PRO-TOURING/SPORT FLARETM WINDSHIELDS • Two styles available: Pro Touring and Sport • The Pro Touring FlareTM is a wider, more full-coverage option for riders and passengers looking for greater wind protection during long-haul touring, yet is stylish enough for use around town • The Sport FlareTM is more streamlined and offers radical curves and sportier stance; it complements the lines of the new fairing with a more aggressive profile and adds stability and handling with improved air management • The patented design features “hips” at the sides that re-route air away from the rider while adding downforce to the front end to improve stability and handling compared to the stock windshield design (the stock design creates lift) • The “flip” at the top of the FlareTM kicks air up and over the rider creating cleaner, less turbulent air for the rider and passenger • Wind tunnel tested and designed for maximum performance and air management • Made of Lexan® polycarbonate with FMR hard coating on both sides of the shield for unmatched durability • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. The Klock Werks FlareTM Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S. And also under International Patents: 324093, 324094, 325192. FOR 15-22 FLTRX/FLTRXS/FLTRK/FLTRU/FLTRUSE MODELS 9" Blue Sport Flare 9" Green 9" Yellow 9" Orange 9" Red PART # DESCRIPTION PRO-TOURING FLARE™ 2310-0752 10” tint 2310-0753 10” dark smoke SPORT FLARE™ 2310-0750 11” tint 2310-0751 11” dark smoke 2310-0728 9” orange 2310-0729 9” yellow 2310-0730 9” red PART # DESCRIPTION SPORT FLARE™ (CONT) 2310-0731 9” green 2310-0732 9” blue 2310-0723 6” orange 2310-0724 6” yellow 2310-0725 6” red 2310-0726 6” green 2310-0727 6” blue 2310-0753 2310-0752
AUGUST 2022 THE DRAG SPECIALTIES 3 dragspecialties.com FOR 14-21 FLHT/FLHX AND FLHTCUTG MODELS PART # DESCRIPTION 2310-0738 6.5” orange 2310-0739 6.5” yellow 2310-0740 6.5” red 2310-0741 6.5” green 2310-0742 6.5” blue 2310-0743 4” orange 2310-0744 4” yellow 2310-0745 4” red 2310-0746 4” green 2310-0747 4” blue FLARETM WINDSHIELDS • Wind tunnel designed and tested, the “hips” provide added downforce for stability while the “flip at the tip directs air up and over the rider to help eliminate swirling and buffeting • Made from unmatched durability Lexan® polycarbonate with FMR hard coating on both sides of the windshield • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. The Klock Werks FlareTM Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S. And also under International Patents: 324093, 324094, 325192. FOR 96-13 FLHT/FLHTC/FLHX AND H-D FL TRIKE MODELS PART # DESCRIPTION 2310-0733 6.5” orange 2310-0734 6.5” yellow 2310-0735 6.5” red 2310-0736 6.5” green 2310-0737 6.5” blue FOR 98-13 FLTR/FLTRX/FLTRU MODELS PART # DESCRIPTION 2310-0748 12” tint 2310-0749 12” dark smoke 2310-0718 8” orange 2310-0719 8” yellow 2310-0720 8” red 2310-0721 8” green 2310-0722 8” blue 4" Orange 6.5" Orange 8" Red 4" Yellow 4" Blue
AUGUST 2022 THE DRAG SPECIALTIES dragspecialties.com 4 FOR DRESSER/TOURING PART # DESCRIPTION FOR 08-21 FLHR/FLHT/FLHX/FLTR/FLTRU/FLTRK/ FLTRX (EXCEPT TRIKES) BROWN 0801-1245 Front TR, rear LS BLACK 0801-1050 Front LS 0801-1049 TR 0801-1244 Front TR, rear LS PART # DESCRIPTION FOR 99-07 FLHR (EXCEPT FLHRS), 06-07 FLHX BLACK 0801-1096 Front LS FOR 99-07 FLHT/FLTR BROWN 0801-1347 Front TR, rear LS 0801-1349 Full LS 0801-1352 Rear LS PART # DESCRIPTION FOR 99-07 FLHT/FLTR CONT'D BROWN 0801-1354 Front LS BLACK 0801-1346 Front TR, rear LS 0801-1348 Full LS 0801-1353 Front LS STEP-UP SEATS • Saddlemen has collaborated with top freestyle performers to create the new T-sport inspired step-up lattice stitch (LS) or tuck-n’-roll (TR) seats • LS seats infuse old-school lattice stitch retro styling with a modern twist • TR seats feature true tuck-n’-roll styling • High lumbar keeps the rider locked into the seat • Features Saddlemen’s Ultra-Foam, which is formulated to provide a perfect balance of rigidity and user compliance with integrated GelCore™ technology • Whisper-grain SaddleHyde™ cover • Installs easily with all necessary mounting hardware and instructions included • Made in the U.S.A. PART # DESCRIPTION FOR 99-07 FLHT/FLTR 0801-1350 Step-Up gripper seat STEP-UP GRIPPER SEAT • Ultra-modern styling with the extreme gripper lumbar – keeps the rider securely locked in the seat • Smooth SaddleHyde™ styling cues • Combines a GelCore™ interior and Ultra-Foam to create a foam that is a perfect balance of rigidity and user compliance • Ultra-Foam’s unique molding process creates an element-resistant, selfskinning process that seals the foam from water and enhances the seat’s durability as well as comfort • Co-molded GelCore is the largest comfort advancement in motorcycle seating since the creation of the suspension • Made in the U.S.A. 0801-1347 0801-1348 0801-1352 0801-1049 0801-1050
AUGUST 2022 THE DRAG SPECIALTIES 5 dragspecialties.com FOR DRESSER/TOURING PART # DESCRIPTION FOR 08-21 FLHR/FLHT/FLHX/FLTR/FLTRU/FLTRK/FLTRX AND 09-13 TRIKES 0801-1284 Front LS 0801-1287 Gripper EXTENDED REACH STEP-UP SEATS • Saddlemen has collaborated with top freestyle performers to create the new T-sport inspired step-up lattice stitch (LS) and gripper seats • LS seat infuses old-school lattice stitch retro styling with a modern twist • Gripper seat features ultra-modern styling with extreme gripper material that keeps the rider stuck in the seat • Extended reach design extends the driver’s seating area a full 2” from the stock seating position • High lumbar keeps the rider locked into the seat • Features Saddlemen’s Ultra-Foam, which is formulated to provide a perfect balance of rigidity and user compliance with integrated GelCore™ technology • Whisper-grain SaddleHyde™ cover • Installs easily with all necessary mounting hardware and instructions included • Made in the U.S.A. PART # DESCRIPTION FOR 08-21 FLHR/FLHT/FLHX/FLTR/FLTRU/FLTRK/FLTRX 0801-1331 Hog Killers seat HOG KILLERS SEAT • Slim design follows the contour of the motorcycle’s frame • Vintage-inspired pleated seat with piping accents and SaddleHyde™ construction • Combines a GelCore™ interior and Ultra-Foam that creates a foam that is a perfect balance of rigidity and user compliance • Ultra-Foam’s unique molding process creates an element-resistant selfskinning process that seals the foam from water and enhances the seat’s durability and comfort • Made in the U.S.A. 0801-1284 0801-1287
AUGUST 2022 THE DRAG SPECIALTIES dragspecialties.com 6 COASTAL MOTO Coastal Moto has been building award-winning custom wheels since 2008. Their innovative, eye-catching 3D one-piece wheel designs have put them at the front of the industry. They offer one of the largest inventories of custom wheels in the United States and ship worldwide. Set your ride apart at the curb or at speed on the road with a set of Coastal Moto wheels. FRONT WHEELS DESCRIPTION FUEL BLACK CUT ROCKSTAR CHROME 21” x 3.25” for 08-22 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK, w/ ABS 0201-2416 — 18” x 5.5” for 09-22 FLHT/FLHR/FLHX/FLTRX, w/ ABS — 0202-2192 MOTO FORGED ALUMINUM WHEELS • New forged hub design • Precision-machined from forged 6061-T6 aluminum • Front wheels accept lug-mounted OEM or aftermarket 14-22 Touring-style front floating brake rotors • Cleans up front end to see more wheel instead of blocking wheel with a full-face rotor and saves on rotor costs • All wheels include bearings and valve stems installed by Coastal Moto • Rear wheel hub accepts stock cush-drive, pulley and brake rotor • Compatible with H-D TPMS (Tire Pressure Monitoring System) • Available for ABS models • Each ABS wheel is equipped with an intelligent ABS bearing and are “linked-brake ready”; no ABS system reprogramming required for any size • Made in the U.S. A. Rockstar Chrome Fuel Black Cut SAFETY WARNING: WHEN SELECTING CUSTOM WHEELS, THE TIRES FOR YOUR APPLICATION MUST HAVE A LOAD INDEX AND SPEED RATING EQUAL TO OR GREATER THAN THE TIRES FITTED AS ORIGINAL EQUIPMENT. CONSULT MANUFACTURER'S PUBLICATION(S) AND/OR WEBITE(S) FOR COMPLETE TIRE INFORMATION.
AUGUST 2022 THE DRAG SPECIALTIES 7 dragspecialties.com FAT BAGGERS, INC. Fat Bagger’s revolutionary handlebar kits featuring their interlocking bolt-together two-piece design are now available for the latest models! Easy to ship, easy to install and easy to wire, these kits showcase the innovative approach and elegant solutions that keep Fat Baggers products at the front of the custom bike scene. CHROME GLOSS BLACK END RISE WIDTH CENTER WIDTH PULLBACK FOR 21-22 FLTRX/FLTRXS/FLTRK, FLTRXSE/FLTRXST (CABLE CLUTCH, 11/4” CLAMPING AREA) 0601-5777 0601-5780 12” 35” 101/4” 8” 0601-5778 0601-5781 14” 35” 101/4” 8” 0601-5779 0601-5782 16” 35” 101/4” 8” FOR 99-13, 21-22 FLHT/FLHTC/FLHTCUI/FLHTK/FLHX AND H-D FL TRIKES (CABLE CLUTCH, 1” CLAMPING AREA) 0601-5771 0601-5774 12” 36” 15” 9” 0601-5772 0601-5775 14” 36” 15” 9” 0601-5773 0601-5776 16” 36” 15” 9” 11/2” EZ INSTALL POINTED TOP HANDLEBARS • Revolutionary interlocking bolt-together two-piece handlebar design that takes up half the shelf space, is economical to ship and even faster to install • CNC mandrel-bent from 11/2” diameter x .095” wall heavy tube • Adjustable 11/2 “ diameter collars next to the handlebar controls for a custom finished look • EZ Install - no more need to fight internal wiring; with our handlebars you can install wiring in minutes • Feature a billet machined top with a large internal machined radius that allows for EZ pulling of wiring (non-welded top corner) • Bars with “squared” lower bends also have additional slots to ease wire routing • Bars are knurled and notched for TBW applications • Made in the U.S.A. NOTE: Accept OEM heated grips. NOTE: U.S. Patent No. 10,946,926 0601-5776 0601-5777
AUGUST 2022 THE DRAG SPECIALTIES dragspecialties.com 8 CHROME GLOSS BLACK END RISE WIDTH CENTER WIDTH PULLBACK FOR 99-13, 21-22 FLHT/FLHTC/FLHTCUI/FLHTK/FLHX AND H-D FL TRIKES (CABLE CLUTCH, 1” CLAMPING AREA) 0601-5765 0601-5768 12” 36” 15” 9” 0601-5766 0601-5769 14” 36” 15” 9” 0601-5757 0601-5770 16” 36” 15” 9” 11/2” EZ INSTALL ROUND TOP HANDLEBARS • Revolutionary interlocking bolt-together two-piece handlebar design that takes up half the shelf space, is economical to ship and even faster to install • CNC mandrel-bent from 11/2” diameter x .095” wall heavy tube • Adjustable 11/2 “ collars next to the handlebar controls for a custom-finished look • EZ Install - no more need to fight internal wiring; with our handlebars you can install wiring in minutes • Bars are knurled and notched for TBW applications • Made in the U.S.A. NOTE: Accept OEM heated grips. NOTE: U.S. Patent No. 10,946,926. 0601-5765 0601-5770
AUGUST 2022 THE DRAG SPECIALTIES 9 dragspecialties.com DESCRIPTION 12”-14” APES 15”-17” APES 18”-20” APES For 21 FLTRK (full length clutch cable and brake lines included) 0662-0956 0662-0957 0662-0958 For 21 FLTRK (full length clutch cable; uses existing lower brake line) 0662-0959 0662-0960 0662-0961 For 21 FLTRX, FLTRXS (full length clutch cable and brake lines included) 0662-0956 0662-0957 0662-0958 For 21 FLTRX, FLTRXS (full length clutch cable; uses existing lower brake line) 0662-0959 0662-0960 0662-0961 0662-0956 0662-0959 DESIGNER DOT BLACK PEARL HANDLEBAR INSTALLATION KITS • The only complete kits with matching braided cables and DOT brake lines • Kits are available for most ABS and non-ABS Harley-Davidson® motorcycles with 12” to 20” ape hanger style handlebars • Kits include Throttle-By-Wire extensions, clutch cable, brake lines, copper crush washers, hardware and any necessary switch wiring or turn signal extension • All cables and DOT brake lines feature Black Pearl braid with highly polished black chrome-plated fittings • Brake lines are constructed with PTFE inner tubing, DuPont™ Kevlar® aramid fiber, premium Signature Magnum braids and an outer PVC jacket • All cables are a low-effort, high-efficiency design that meets or exceeds all OE specifications for fitment, construction and endurance • Brake lines are compliant with all DOT FMVSS-106 Specifications • Assembled in the U.S.A. DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.
AUGUST 2022 THE DRAG SPECIALTIES dragspecialties.com 10 DESCRIPTION 12”-14” APES 15”-17” APES 18”-20” APES For 21 FLHR (full length clutch cable and brake lines included) 0662-0963 0662-0964 0662-0965 For 21 FLHR (full length clutch cable; uses existing lower brake line) 0662-0966 0662-0967 0662-0968 For 21 FLHRXS (full length clutch cable and brake lines included) 0662-0969 0662-0970 - For 21 FLHRXS (full length clutch cable; uses existing lower brake line) 0662-0971 0662-0972 - DESIGNER DOT BLACK PEARL HANDLEBAR INSTALLATION KITS (CONT) 0662-0969 0662-0971
AUGUST 2022 THE DRAG SPECIALTIES 11 dragspecialties.com HAWG HALTERS, INC. They ride what they build! Hawg Halters, Inc. (HHI) takes pride in making American-designed and made parts and accessories that are engineered to strict quality standards, using extensive prototyping and pre-production testing to ensure the best quality for your motorcycle. Every part is polished, then chrome or anodized-finished in-house and given a thorough quality inspection before being shipped. 0408-0414 0408-0415 0408-0416 DOMINATOR TRIPLE TREE CONVERSION KITS • Offer stronger clamping and reduced weight for a more responsive front end • Stock replacement model retains the ignition switch and stock fork lock capability • Track style is designed with the stock rake and does not accept stock fairings or fork covers PART # LENGTH DESCRIPTION FOR 14-22 FLHR/FLHX/FLHT MODELS 0408-0414 49mm Stock replacement 0408-0415 49mm Track style FOR 97-13 FLHR/FLHT MODELS 0408-0416 49mm Stock replacement 0408-0417 49mm Track style 0408-0418 41mm Stock replacement 0408-0419 41mm Track style
AUGUST 2022 THE DRAG SPECIALTIES dragspecialties.com 12 PART # DESCRIPTION FOR 02-07 FLHT/FLHX/FLTR/F LHR MODELS; REPL. OEM #42407-02 1610-0611 Chrome 1610-0612 Gloss black PART # DESCRIPTION FOR 08-13 FLHT/FLHTK/FLHX/FLTR/FLHR MODELS; REPL. OEM #42407-08 1610-0613 Chrome 1610-0614 Gloss black PART # DESCRIPTION 2401-1563 Chrome-plated 2401-1564 Black zinc nickel-plated HAND CONTROL SCREW KITS • All hand control screws and washer available in one convenient pack • Screws are chrome-plated or black zinc nickel-plated for corrosion resistance • 1/4”-20 x 11/8” screws; repl. OEM #4132 PART # DESCRIPTION 2401-1562 Black zinc nickel-plated 2401-1565 Chrome-plated SWITCH HOUSING SCREW KITS • All switch housing screws in one convenient pack • Screws are chrome-plated or black zinc nickel-plated for corrosion resistance • 10-24 x 1/2" screws; repl. OEM #3658 1610-0611 1610-0612 BRAKE PEDALS • Accepts stock pad • Measures 95/8” L; smooth finish • Sold each 2401-1565 2401-1563
AUGUST 2022 THE DRAG SPECIALTIES 13 dragspecialties.com PART # DESCRIPTION 1003-1948 For HSR 42/45 1003-1949 For HSR 48 CARBURETOR KITS FOR MIKUNI • NBR rubber material is used on all O-rings and rubber gaskets – NBR has excellent resistance to the ethanol used in today’s fuels • Kit is intended for closed-course racing only • Includes: all gaskets and O-rings including spigot body gasket; float bowl, carburetor cap and spigot body screws; fuel mixture screw with spring, washer, and O-ring; float needle valve with FMK tip; and accelerator pump boot 1003-1948 1003-1949 PART # DESCRIPTION 1050-0451 For Keihin 40mm CV carbs EXTENDED FUEL MIXTURE SCREW • Kit includes all necessary parts to replace OEM-style fuel mixture screw with an extended screw for easy tuning • Kit includes extended mixture screw O-ring, spring and washer
AUGUST 2022 THE DRAG SPECIALTIES dragspecialties.com 14 40” STUPID-TALL SISSY BARS • Classic-styled, one-piece sissy bar • Sturdy, TIG-welded steel construction • Mounts to outside of fender rails for easy installation and removal • Available in black powdercoat finish • Includes compact black vinyl pad (measures 6” W x 31/4” H) PART # DESCRIPTION 1501-0746 For 06-17 Dyna 1501-0744 For 04-22 XL 1501-0745 For 96-03 XL PART # DESCRIPTION FOR 17-22 FLHT/ FLHR/ FLHX/ FLTR/H-D TRIKE, 18-22 SOFTAIL MODELS 1014-0312 Left, black 1014-0314 Right, black 1014-0313 Left, chrome 1014-0315 Right, chrome FOR 08-16 FLHT/ FLHR/ FLHX/ FLTR/H-D TRIKE, 16-17 SOFTAIL, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE, 16-17 FXDLS MODELS 1014-0316 Left, black 1014-0318 Right, black 1014-0317 Left, chrome 1014-0319 Right, chrome PART # DESCRIPTION FOR 01-17 TWIN CAM DELPHI EFI MODELS, 99-06 TWIN CAM CV CARB MODELS (EXCEPT 08-16 FLHT/ FLHR/ FLHX/ FLTR/H-D TRIKE, 16-17 SOFTAIL, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE, 16-17 FXDLS MODELS) 1014-0320 Left, black 1014-0322 Right, black 1014-0321 Left, chrome 1014-0323 Right, chrome FOR 91-22 XL MODELS (EXCEPT 21-22 SPORTSTER S/ RH1250S) 1014-0324 Left, black 1014-0326 Right, black 1014-0325 Left, chrome 1014-0327 Right, chrome 1014-0312 1014-0321 1501-0745 1501-0744 REPLACEMENT BREATHER BOLT COVER PLATES FOR INVERTED, METHOD, CLEAR TEAR AND SIDEKICK AIR CLEANERS • CNC-machined covers that hide the breather bolts (left and right sides sold separately)
AUGUST 2022 THE DRAG SPECIALTIES 15 PART # DESCRIPTION 0928-0122 For 17-21 M-Eight, 99-17 Twin Cam and 86-21 XL CHROME PUSHROD TUBES • Enhance the look of the engine • Tubes only, pushrod keepers sold separately • Sold as a set of four PART # DESCRIPTION 0928-0121 For 17-21 M-Eight CHROME PUSHROD TUBE KEEPERS • Simple, effective way to enhance the look of your engine • Sold in a set of four 0931-1079 0931-1082 0931-1083 FOR 17-21 M-EIGHT PART # FINISH 129” BORE KIT FOR 107” MOTORS (4.375” STROKE) 0931-1079 Wrinkle black w/ highlight 0931-1080 Wrinkle black w/ no highlight 132” BORE KIT FOR 114”/117” MOTORS (4.500” STROKE) 0931-1081 Wrinkle black w/ highlight 0931-1082 Wrinkle black w/ no highlight 136” BORE KIT (4.625” STROKE) 0931-10831 Wrinkle black w/ highlight 0931-10841 Wrinkle black w/ no highlight 1 To achieve 136” displacement, S&S stroker flywheels must also be used (sold separately) 129”/132”/136” BIG BORE KITS FOR M-EIGHT* • Huge bore increase (4.320”) means big power increases • Work with the original stock crankcases • Powdercoat finish matches the factory finish, giving you the “sleeper” look advantage • Head gaskets are Multi-Layered Steel (MLS) • Stock engine height is retained • Cam cover badge included • Made in the U.S.A.
RkJQdWJsaXNoZXIy NDI5NTY=