PART # DESCRIPTION 1800-2556 For 18-22 FLSB and 22 FXLRST • Utilizes an advanced inner collector for maximum performance • Includes 18mm O2 sensor ports and 12mm adapters • Made in the U.S.A. PART # DESCRIPTION FOR 14-20 XL1200C/1200CX/1200T 1800-2465 Chrome w/ chrome heat shields 1800-2464 Black w/ black heat shields 1800-2465 ROAD RAGE STAINLESS 2-INTO-1 EXHAUST SYSTEM WITH “SUPER BIKE” MEGAPHONE MUFFLER* • Stainless steel construction with hand TIG welding • Stepped 13/4” to 17/8” headpipes welded to collector and Megaphone muffler • Partial stainless heat shields RADIAL SWEEPERS* • Stepped 1¾” to 2” headpipes • 16-gauge construction • O2 sensor port plugs included for non-sensor applications • Full-coverage heat shields • Mad in the U.S.A. THE DRAG SPECIALTIES SEPTEMBER 2022 dragspecialties.com
SEPTEMBER 2022 THE DRAG SPECIALTIES dragspecialties.com 2 2-INTO-1 MEGAPHONE SYSTEM* • Stainless steel construction • Features completely rebuildable core • Low-to-mid range power gains of 15%-20% • 18mm O2 ports with 12mm adapters and plugs for carb models V-5 SLIP-ON MUFFLER* • 5” disc-based stainless tunable muffler with USFS approved spark arrestor • Features two center pull retainer clamps that allow for slippage rather than breaking in the event of a tip over • Almost six pounds lighter than stock • Stainless S-bend connector pipe increases boot clearance • Includes 22 pre-installed discs for a deep, low tone • Also includes all necessary hardware for simple installation PART # DESCRIPTION 1800-2551 For 04-22 XL 883/1200 PART # DESCRIPTION 1801-1501 For RA1250/1250S Pan America • Substantial 13.25 lb. weight savings • 4”disc-based tunable system • Includes 20 discs, closed end cap and mounting bracket
SEPTEMBER 2022 THE DRAG SPECIALTIES 3 dragspecialties.com DESCRIPTION PART # HALOGEN Black 2001-1340 LED Aluminum 2001-1339 Black 2001-1341 MINI DRIVING LIGHTS • Available in halogen or LED • Die-cast body with smooth design • Visor integrated into bezel; setscrew allows visor to rotate to desired position for custom installation • 33/4” L x 23/8” dia.; 8mm stem • Halogen features 55W, 12V bulb • LED features 7W, six 12V bulbs • Sold each 2001-1341 2001-1339 PART # 2001-1719 LOWER AUXILIARY LED LIGHTS FOR CAN-AM SPYDER F3 15-21 (ALL) • Popular 23/8’’ LED Auxiliary Spotlights for lower front fairing of the CanAm F3 • A pair of black satin brackets easily secures to the lower fairing into existing mounting holes, giving these auxiliary lights a floating effect • LED spotlights deliver a whopping 490 lumens with 5000K color in matching black satin light housings • Dimmable design affords less feedback to weak radio signals and comes with a dedicated wire harness including a separate relay and switch providing circuit isolation PART # 0521-1885 MINI LED LIGHT KIT FOR CAN-AM SPYDER RT 20-21 • 23/8” LED auxiliary spot light for the front fairing of the RT • Black satin brackets easily secures to the front fairing into existing mounting holes • Delivers a whopping 490 lumens with 5000K color • Dimmable design affords less feedback to weak radio signals and comes with a dedicated wire harness • Includes a separate relay and switch providing circuit isolation • All mounting hardware also included • Sold in pairs PART # 2001-2282 MINI LED LIGHT KIT FOR CAN-AM RYKER 19-21 • Mini LED driving lights with dimmable hi-output 490 LED • Easy no-drill light brackets mount to existing locations under the front frame cowl • All wiring, relay, illuminated switch and hardware are included • Drilling required to install the switch • DOT compliant • Available in satin black
SEPTEMBER 2022 THE DRAG SPECIALTIES dragspecialties.com 4 FOR DRESSER/TOURING PART # DESCRIPTION FOR 08-21 FLHX/FLHR/FLTR/FLTRU/FLTRK/FLTRX/FLHT (EXCEPT 14-21 MODELS W/ OEM TOUR-PAK®) 0801-1174 W/o driver’s backrest 0801-1256 W/ driver’s backrest PRO SERIES SDC PERFORMANCE GRIPPER SEATS • True performance-oriented comfort seat with contoured lines, bucketed driver’s seating area and substantial lumbar support • Crafted with Saddlemen’s carbon-fiber at the front, black gripper on the lumbar support and SaddleHyde™ sides • Lattice stitch (LS) design infuses old-school lattice stitch retro styling with a modern twist • Features GelCore™ technology that reduces engine vibration by up to 50% and road impacts by up to 92% for a noticeably comfortable ride • Driver portion measures 16.5” L x 11.5” W • Lumbar section measures 7” H • Passenger portion measures 11.25” L x 6.75” W • Available with or without driver’s backrest • Made in the U.S.A. PART # DESCRIPTION FOR 08-21 FLHR/FLHT/FLHX/FLTR/FLTRU/FLTRK/FLTRX AND 09-13 TRIKES 0801-1361 Unknown Industries extended reach gripper seat UNKNOWN INDUSTRIES EXTENDED REACH PERFORMANCE GRIPPER SEAT • Extends the driver’s seating area by a full 2” • Combines a GelCore™ interior and Ultra-Foam to create a foam that is a perfect balance of rigidity and user compliance • Crafted with Saddlemen’s carbon fiber at the front, black gripper on the lumbar support and SaddleHyde™ sides • Made in the U.S.A. PART # DESCRIPTION 0801-1360 For 08-21 FLHR/FLHT/FLHX/FLTR/FLTRX/FLTRU/FLTRK 0801-1358 For 99-07 FLHR (except FLHRS), 06-07 FLHX PART # DESCRIPTION 0801-1359 For 99-07 FLHT/FLTR UNKNOWN INDUSTRIES PERFORMANCE GRIPPER SEATS • Combines a GelCore™ interior and Ultra-Foam to create a foam that is a perfect balance of rigidity and user compliance • Crafted with Saddlemen’s carbon fiber at the front, black gripper on the lumbar support and SaddleHyde™ sides • Made in the U.S.A. 0801-1256 0801-1360
SEPTEMBER 2022 THE DRAG SPECIALTIES 5 dragspecialties.com ALTERNATING BRAKE STROBE MODULE • Plug-and-play brake strobe module takes alerting traffic behind you to the next level • When the brake is applied, the programmed flash or strobe pattern will alternate between left and right side lighting accessories creating an eyecatching pattern HANDLEBAR WIRE EXTENTION KITS • Wires of pre-cut lengths are prepped to easily extend OEM wires when installing taller handlebars • olor-matched wires include Molex terminals on each end • Equipped with pins and connectors • Plug-and-Play THROTTLE-BY-WIRE HANDLEBAR WIRE EXTENTION KITS • Wires of pre-cut lengths are prepped to easily extend OEM wires when installing taller handlebars • Color-matched wires include Molex terminals on each end • Equipped with pins and connectors • Plug-and-Play PART # DESCRIPTION 2050-0461 For 14-22 FLHX/FLTRX/FLTRK/FLTRU/FLHT/FLHTCU/FLHTCUL/FLHTK/FLHR/FLHRXS 2050-0463 For 10-13 FLHX/FLTRX (except CVO models) 2050-0462 For 97-13 FLHT/FLHTCU/FLHTK/FLHR/FLHRC/FLTRU, 98-09 FLTR, 06-09 FLHX, 96-17 Softails (except FXSB/FXSBSE/FXSE/ FXCWC/FLS/FLSS/FXS/FLSTSE2 CVO), 97-17 Dyna, 99-03 XL 2050-0464 Universal for 12V DC negative ground systems PART # DESCRIPTION FOR 14-22 TOURING AND TRIKE, 11-22 SOFTAIL, 12-17 DYNA AND 14-22 XL (EXCEPT 21-22 SPORTSTER S/RH1250S) 2120-1170 8” extention kit 2120-1175 4” extention kit PART # DESCRIPTION FOR 08-13 FLHT/FLHTCU/FLHTK/FLHR/FLHX/FLTR/FLTRU/FLHTCUTG 2120-1174 15” extention kit 2120-1176 12” extention kit PART # DESCRIPTION FOR 08-13 FLHT/FLHTCU/FLHTK/FLHR/FLHX/FLTR/FLTRU/FLHTCUTG 2120-1171 15” extension kit 2120-1172 12” extension kit PART # DESCRIPTION FOR 08-13 FLHT/FLHTCU/FLHTK/FLHR/FLHX/FLTR/FLTRU/FLHTCUTG (CONT) 2120-1173 8” extension kit 2120-1177 4” extension kit CUSTOM DYNAMICS Customizing electronics on modern bikes requires more than just wire cutters and solder. Custom Dynamics has the technical know-how and engineering skills to design and build true plug-and-play solutions to make installing custom LED lighting on your bike simple with reliable, eye-catching results. • Compatible with add-on custom LED lighting (such as Custom Dynamics® LED Boltz™ PART #s 2040-2838 and 2040-2839) when used as left and right side rear brake lights • Does not affect OEM rear brake lights • Sold each 2050-0461 2050-0464 2050-0462 2050-0463 2120-1171 2120-1172 2120-1170
SEPTEMBER 2022 THE DRAG SPECIALTIES dragspecialties.com 6 FUELPAK FP4* • Built from the ground up, Android and iPhone apps feature a new rider interface and are easier to navigate and use than ever before • Live Data in the FP4 app has been upgraded with a whole new look and an additional gauge to track more crucial data while riding • All-new Performance Data feature allows rider to record their ride, look at all available sensors in the created chart and see a map of their ride recorded with their phone’s onboard GPS • Made of polycarbonate plastic/Bluetooth low energy, FP4 hardware smaller and thinner than the previous generation electronics product • Unit’s LEDs have been simplified so the rider knows exactly what is happening between the FP4 and the rider’s motorcycle • All necessary hardware and Instructions included • Made in the U.S.A. NOTE: Always wear proper safety gear and ride in a responsible manner. Legal in California only for racing vehicles which may never be used or registered or licensed upon a highway. O2 SENSOR • Front 12mm oxygen sensor • Gray connector 52", 4 wire • Precision made consisting of a ceramic body made of stabilized zirconium dioxide, surface coated with gas-permeable platinum electrodes and a porous ceramic to aid the prevention of erosion due to contamination and particulates in the exhaust gases • Slow oxygen sensors can cause a drop in fuel economy of 10-15%, excessive exhaust emissions and poor drivability • Life expectancy of an average oxygen sensor in a properly tuned engine is typically 30,000 - 50,000 miles • Meets or exceeds OE specifications • Made in the U.S.A. • Sold each FUEL INJECTOR • Factory OEM Fuel injector for M-Eight engines • Delivers fuel at 4.4 grams per second through multiple spray holes • Injector has EV-6 USCAR type connector • Recommended for factory replacement • Made in the U.S.A. CYLINDER HEAD TEMP SENSOR • Electronic engine management sensor found on the cylinder head • Measures the temperature of the cylinder head • Data is then sent to the ECU to calculate timing and fuel ratio for the engine • Like all sensors, they can fail over time and this may cause long cranking time, decrease in power, acceleration and fuel economy • Made in the U.S.A. PART # DESCRIPTION 1020-3962 For 14-20 FLHT/FLHX/FLTRX/S/FLTRU/FLTRK/FLHT, 15-20 FLRT, 11-20 Softails, 12-17 Dynas (excluding 11-13 CVO Softails) 12-17 Dynas, 14-22 XL Sportster models (except 21-22 Sportster S/RH1250S and 22 Nightster RH975) and 15-20 XG500/750/750A PART # DESCRIPTION 1861-1647 For 17-22 Touring models PART # DESCRIPTION 1022-0275 For 17-22 M-Eight Touring and 18-22 Softails; repl. OEM #27400015 PART # DESCRIPTION 2212-0861 For 99-17 Twin Cam; repl. OEM #32446-99 EXTERNAL BREATHER KITS* • Converts the Assault Charge Air Cleaner from internal to external breathing • Vents breathers to atmosphere instead of recirculating oil mist back through the intake • Made in the U.S.A. PART # DESCRIPTION 1012-0255 All Twin Cam engines running an Assault Charge Air Cleaner 1012-0256 All M8 engines running an Assault Charge Air Cleaner 1012-0255 1012-0256
SEPTEMBER 2022 THE DRAG SPECIALTIES 7 dragspecialties.com RACE SERIES OILING SYSTEM/CAMCHEST FRESHEN UP KIT FOR TWIN CAM* • Freshen up camchest and oiling system on late model Twin Cam engines • Kit uses existing camshafts or allows purchase of preferred cam selection while upgrading camchest with a new Race Series high volume oil pump, High Flow camplate, Race Series full travel lifters, billet tensioner housings, tensioner pads, cam/c rank sprockets, sprocket alignment spacers, cam chains, cam bearings, hardware, gaskets and o-rings HP+ OILING SYSTEM/CAMCHEST FRESHEN UP KIT FOR TWIN CAM* • Freshen up camchest and oiling system on late model Twin Cam engines • Kit uses existing camshafts or allows purchase of preferred cam selection while upgrading camchest with a new HP+ high volume oil pump, High Flow camplate, HP+ lifters, billet tensioner housings, tensioner pads, cam/c rank sprockets, sprocket alignment spacers, cam chains, cam bearings, hardware, gaskets and o-rings PART # DESCRIPTION 0932-0296 For all 07-17 Twin Cam and 06 Dyna PART # DESCRIPTION 0932-0295 For all 07-17 Twin Cam and 06 Dyna • Made in the U.S.A. NOTE: Designed for use with 07-17 chain drive camshafts. See Feuling camshaft selection: PART #0928-0427 (525 Grind), PART #0925-0673 (543 Grind), PART #0925-0430 (574 Grind), PART #0925-0677 (594 Grind) and PART #0925-0433 (630 Grind). • Made in the U.S.A. NOTE: Designed for use with 07-17 chain drive camshafts. See Feuling camshaft selection: PART #0928-0427 (525 Grind), PART #0925-0673 (543 Grind), PART #0925-0430 (574 Grind), PART #0925-0677 (594 Grind) and PART #0925-0433 (630 Grind).
SEPTEMBER 2022 THE DRAG SPECIALTIES dragspecialties.com 8 GRIPS • Seamless Rubber Grip technology • Billet aluminum end caps and collars • Match for Khrome Werks Edge, Turbine and Tracer muffler end caps • Fit bars made for 1” grips PART # DESCRIPTION FOR 08-21 FLHT/FLHR/FLTRX/F LTRU/FLTRK/FLHX, H-D FL TRIKE, 16-21 SOFTAILS, 20-21 ELW, 16-17 FXDLS, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE 0630-2835 Contour Edge, black 0630-2837 Contour Edge, chrome 0630-2836 Air Cushion Edge, black 0630-2838 Air Cushion Edge, chrome KHROME WERKS A new look in custom grips! Khrome Werks is excited to offer their new Edge grips in custom contour and air cushion styles. Available for cable or Throttle By Wire applications, they add comfort and style to your bike. • Available in Air Cushion or Contour style • Made in the U.S.A. 0630-2837 0630-2836 PART # 2050-0262 UNIVERSAL DRIVING LIGHT WIRING KIT • An easy solution for connecting driving or fog lights that do not come with a wire harness • This Universal Wire Harness comes with two illuminated rocker switches allowing owners to choose from either the rectangular 1/2’’ x 3/4’’ cutout switch or 7/8’’ round switch • Big Bike Parts wire harnesses are known for providing protection to the vehicle’s electrical circuit by including a separately fused power source and isolation relay, making this wire harness kit truly separate from the vehicle’s electrical system • 12 Volt universal application; includes relay and two switches TUNED INDUCTION SYSTEM REPLACEMENT AIR FILTER* • High-flow cotton filter media provides increased airflow for better performance • Washable and reusable PART # DESCRIPTION 1011-4631 Replacement air filter • Tapered design • Sold each • Made in the U.S.A.
SEPTEMBER 2022 THE DRAG SPECIALTIES 9 dragspecialties.com 1 1/2” EZ INSTALL FLAT TOP HANDLEBARS • Revolutionary interlocking bolt-together two-piece handlebar design that takes up half the shelf space, is economical to ship and even faster to install • CNC mandrel-bent from 1 1/2” diameter x .095” wall heavy tube • Adjustable 1 1/2 “ diameter collars next to the handlebar controls for a custom finished look • EZ Install - no more need to fight internal wiring; with our handlebars you can install wiring in minutes • Feature a billet machined top with a large internal machined radius that allows for EZ pulling of wiring (non-welded top corner) 1 1/2” EZ INSTALL POINTED TOP HANDLEBARS • Revolutionary interlocking bolt-together two-piece handlebar design that takes up half the shelf space, is economical to ship and even faster to install • CNC mandrel-bent from 1 1/2” diameter x .095” wall heavy tube • Adjustable 1 1/2 “ diameter collars next to the handlebar controls for a custom finished look • EZ Install - no more need to fight internal wiring; with our handlebars you can install wiring in minutes • Feature a billet machined top with a large internal machined radius that allows for EZ pulling of wiring (non-welded top corner) EZ CLUTCH ADJUSTER UPGRADE KIT • Converts the factory upper clutch cable adjuster to a screw-type ½”-20 adjuster • Reinforces the clutch cable • Works as a repair part for a broken HD factory cable adjuster CHROME GLOSS BLACK END RISE WIDTH CENTER WIDTH PULLBACK FOR 21-22 FLTRX/FLTRXS/FLTRK/FLTRXSE/FLTRXST/FLTRXSE 0601-5795 0601-5898 12” 35” 10 1/4” 8” 0601-5796 0601-5799 14” 35” 10 1/4” 8” 0601-5797 0601-5800 16” 35” 10 1/4” 8” FOR 99-13, 21-22 FLHT/FLHT/FLHTK/FLHTKSE/FLHX/FLHXS/FLHXSE/FLHTCI/FLHTCUSE/FLHTPI/FLHTCUTG/FLHTCUTGSE 0601-5789 0601-5792 12” 36” 15” 9” 0601-5790 0601-5793 14” 36” 15” 9” 0601-5791 0601-5794 16” 36” 15” 9” CHROME GLOSS BLACK END RISE WIDTH CENTER WIDTH PULLBACK FOR 21-22 FLHRXS 0601-5783 0601-5786 12” 35” 10 1/4” 8” 0601-5784 0601-5787 14” 35” 10 1/4” 8” 0601-5785 0601-5788 16” 35” 10 1/4” 8” PART # DESCRIPTION 0660-0014 For 22 FL Touring and 22 Softail with cable clutch • Bars with “squared” lower bends also have additional slots to ease wire routing • Bars are knurled and notched for TBW applications • Made in the U.S.A. NOTE: Accept OEM heated grips. NOTE: U.S. Patent No. 10,946,926 • Bars with “squared” lower bends also have additional slots to ease wire routing • Bars are knurled and notched for TBW applications • Made in the U.S.A. NOTE: Accept OEM heated grips. NOTE: U.S. Patent No. 10,946,926 • Works with stock clutch cable and Fat Baggers EZ Clutch Extensions • Made in the U.S.A. 0601-5795 0601-5794 0601-5786 0601-5785
SEPTEMBER 2022 THE DRAG SPECIALTIES dragspecialties.com 10 KARBONFIBR DESIGNER DOT HANDLEBAR INSTALLATION KITS • The only complete kits with matching braided cables and DOT brake lines • Kits include Throttle-By-Wire extensions, clutch cable or hydraulic clutch line, brake lines, copper crush washers, hardware and any necessary switch wiring or turn signal extension • Select kits are also available with Quick Connect upper clutch cables that reuse the existing lower clutch section • All cables and DOT brake lines feature KarbonFibr braid with highly polished black chrome-plated fittings • KarbonFibr braid is created from metallic wire with distinct black tone colors, blended and interwoven to mimic the distinct look of carbon fiber • Brake lines are constructed with PTFE inner tubing, DuPont™ Kevlar® aramid fiber, premium Signature • Magnum braids and an outer PVC jacket DESCRIPTION 10” APES 12”-14” APES 15”-17” APES TOURING For 21 FLHRXS (w/ Quick Connect Upper Clutch cable; uses existing lower clutch cable and brake line) - 0662-1032 0662-1033 For 21 FLHR (w/ Quick Connect Upper Clutch cable; uses existing lower clutch cable and brake line) - 0662-1037 0662-1038 For 21 FLHT, FLHTK/S, FLHX/S (w/ Quick Connect Upper Clutch cable and full length brake line) - 0662-1084 0662-1085 For 21 FLHT, FLHTK/S, FLHX/S (w/ Quick Connect Upper Clutch cable; uses existing lower clutch cable and lower brake line) 0662-1059 0662-1057 0662-1058 For 21 FLTRK, FLTRX, FLTRXS (w/ Quick Connect Upper Clutch cable; uses existing lower clutch cable and brake line) - 0662-1034 0662-1035 SOFTAIL For 18-20 FLDE, 18-21 FLFB/S, FLHC/S, FLSB, FLSL (w/ ABS) (w/ Quick Connect Upper Clutch cable; uses existing lower clutch cable and brake line; includes an adapter) - 0662-1070 0662-1071 For 18-20 FXBR/S, 18-21 FXBB/S, 18-20 FXLR (w/ ABS) (w/ Quick Connect Upper Clutch cable; uses existing lower clutch cable and brake line; includes an adapter) - 0662-1070 0662-1071 For 18-21 FXFB/S (w/ ABS) (w/ Quick Connect Upper Clutch cable; uses existing lower clutch cable and brake line; includes an adapter) - 0662-1039 0662-1040 For 20-21 FXLRS (dual disc w/ ABS) (w/ Quick Connect Upper Clutch cable; uses existing lower clutch cable and brake line; includes an adapter) - 0662-1039 0662-1040 • All cables are a low-effort, high-efficiency design that meets or exceeds all OE specifications for fitment, construction and endurance • Kits for dual disc models include an all brazed manifold that eliminates leaks, alignment problems and unattractive threaded connections • Brake lines are compliant with all DOT FMVSS-106 Specifications • Assembled in the U.S.A. • DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company. NOTE: Kits are based on using ape hanger style handlebars with 2” risers; except Touring models. 0662-1032 0662-1070 0662-1033
SEPTEMBER 2022 THE DRAG SPECIALTIES 11 dragspecialties.com XR STAINLESS DOT HANDLEBAR INSTALLATION KITS • Magnum XR DOT Handlebar Installation Kits offer a great fit and excellent quality at an economical price • XR DOT Handlebar Installation Kits are available for popular ABS HarleyDavidson® motorcycles with 12” to 17” ape hanger style handlebars • Available with Quick Connect upper clutch cables that reuse the existing lower clutch section • Three color combinations to complement your bike: clear-coated stainless steel with chrome fittings, black-coated with chrome fittings or black-coated with black fittings • All cables are a low-effort, high-efficiency design that meets or exceeds all OE specifications for fitment, construction, endurance • Magnum XR DOT brake lines use an enhanced construction of heavy gauge stainless steel embedded in tough abrasion-resistant nylon outer jacket for superior durability • The coating on cables and brake lines offers exceptional protection for paint or chrome • Kits that include manifolds use an all-brazed construction to ensure optimal OE fitment and appearance • Manifolds use AN-3 connections for an easy installation DESCRIPTION STAINLESS W/ CHROME FITTINGS 12”-14” STAINLESS W/ CHROME FITTINGS 15”-17” BLACK W/ CHROME FITTINGS 12”-14” BLACK W/ CHROME FITTINGS 15”-17” BLACK W/ BLACK FITTINGS 12”-14” BLACK W/ BLACK FITTINGS 15”-17” For 21 FLHT/FLHTK/FLHX/FLHXS w/ ABS (w/ Quick Connect Upper Clutch cable and full length brake line) 0662-1090 0662-1091 0662-1088 0662-1089 0662-1086 0662-1087 • Kits include Throttle-By-Wire extensions, clutch cable, XR DOT brake lines, copper crush washers, hardware, fully terminated turn signal and switch wiring extensions • Brake lines are compliant with all DOT FMVSS-106 Specifications NOTE: Kits are based on using ape hanger style handlebars and 2” risers (except Touring models). 0662-1090 0662-1086 0662-1088
SEPTEMBER 2022 THE DRAG SPECIALTIES dragspecialties.com 12 DYNOJET "Hard Parts for the Pan America" The Pan AmericaTM is taking riders on all sorts of new on- and offroad adventures. Make sure your bike is ready with accessories from Dynojet. Axle sliders, chain guards, chain adjusters, levers and more. Improve your bike’s style and up the impact protection before your next adventure ride with accessories from Dynojet. IGNITION COIL GUARD • Protects the ingnition coil in the event of a tip over • Made from 6061-T6 aluminum • Hard anodized in stealth gray finish • Easy installation • Made in the U.S.A. CHAIN GUARD • Billet aluminum guard deflects rocks and shields the drive system from impacts which would derail the chain • Constructed of 6061-T6 aluminum and reinforced between the tabs • Hard anodized stealth gray finish • Made in the U.S.A. AXLE SLIDER KITS • Constructed of high-quality acetal plastic material to keep the axle protected in case of a fall or if the terrain adds rocky ruts to your path • Designed to hold tight sealing inside your axle, keeping dust and debris at bay • Easy, no-tool assembly • Sold as a set, including right/left pair • Made in the U.S.A. BRAKE PEDAL EXTENDER • Adds height to the brake pedal for a more comfortable standing position • Made from 6061-T6 aluminum • Hard anodized in stealth gray finish • Made in the U.S.A. CHAIN BLOCK ADJUSTERS • Replaces the stock chain adjusters • Made of 6061-T6 aluminum • Captures the nut on the left-hand side • Hard anodized in stealth gray finish • Made in the U.S.A. SIDESTAND SWITCH GUARD • Protects the vulnerable sidestand switch • Made from 6061-T6 aluminum • Hard anodized in stealth gray finish • Made in the U.S.A. REAR BRAKE RESERVOIR GUARD • Protects the vulnerable brake reservoir on the right-hand side of the bike • Made from 6061-T6 aluminum • Hard anodized in a stealth gray finish • Made in the U.S.A. PART # DESCRIPTION 2102-0440 For 21-22 RA1250/1250S models PART # DESCRIPTION 1202-0166 For 21-22 RA1250/1250S models PART # DESCRIPTION 0214-2139 Front PART # DESCRIPTION 0214-2140 Rear PART # DESCRIPTION 1610-0651 For 21-22 RA1250/1250S models PART # DESCRIPTION 1231-1568 For 21-22 RA1250/1250S models PART # DESCRIPTION 0510-0628 For 21-22 RA1250/1250S models PART # DESCRIPTION 1731-0770 For 21-22 RA1250/1250S models FOR 21-22 RA1250/1250S MODELS 0214-2140 0214-2139
SEPTEMBER 2022 THE DRAG SPECIALTIES 13 ONE-PIECE ALUMINUM FRONT WHEELS • Forged wheels place the highest material strength in the same direction as the operating load, creating a light, strong wheel • Feature the contour rim lip for a graceful arc from rim to lip • Available in chrome, Platinum Cut™, Black Ops™ or Gold Ops™ • Platinum Cut™ finish starts with a polished wheel that has been black anodized, then recut to pen up the design and the recut is polished to a brilliant shine • Black Ops™ finish features gloss black on top of a contrasting textured black finish for outstanding durability and looks DESCRIPTION PARAMOUNT PLATINUM CUT PARAMOUNT CHROME FORMULA PLATINUM CUT FORMULA CHROME PRO-AM BLACK OPS PRO-AM GOLD OPS 21” X 3.5” for 14-21 FLHT/FLHR/FLHX/ FLTRX/FLTRU/FLTRK w/o ABS (dual disc) 0201-2419 0201-2420 21” X 3.5” for 14-21 FLHT/FLHR/ FLHX/FLTRX/FLTRU/F LTRK w/ ABS (dual disc) 0201-2426 0201-2422 0201-2421 0201-2425 0201-2423 0201-2424 PERFORMANCE MACHINE Performance Machine continues to be at the front of the custom wheel market for American V-Twins. The second-to-none designs and machined to exact tolerances for a beautiful look and reliable performance. A wide range of show-quality finishes let you get the exact look to match your bike. Now available for the latest M-Eight Touring applications. • Gold Ops™ finish features gloss gold on top of a contrasting textured gold finish for outstanding durability and looks • Made in the U.S.A. NOTE: Models with TPMS will require PART #0360-0056 (sold separately) NOTE: Front wheels listed as fitting 14-20 Dresser models will require the use of PM front brake rotors (3.25” bolt circle) NOTE: 14-19 FLHT/FLHR/FLHX 21” front wheels include fender relocation brackets for use with stock fenders. PARAMOUNT PLATINUM CUT PARAMOUNT CHROME FORMULA PLATINUM CUT FORMULA CHROME PRO-AM BLACK OPS PRO-AM GOLD OPS
RkJQdWJsaXNoZXIy NDI5NTY=