JANUARY 2023 THE DRAG SPECIALTIES dragspecialties.com 16 PART # DESCRIPTION 0414‑0549 For 18‑21 FXFB/FXLRS (43mm forks) AXEO HIGH-PERFORMANCE FRONT SUSPENSION SYSTEMS FOR SOFTAIL MODELS WITH 43MM INVERTED FORKS • Replaces the asymmetrical stock fork internals with a high-performance twin cartridge set • Designed to be used with stock diameter front wheels • Easy installation • Includes two mono-tube, dual chambered damper cartridges • Performance spring rate • Machined 303 stainless threaded pre-load adjuster • Internal linear spring guide and polyurethane bump stop are unique to the LegendAxeo43 system • Ride quality is smooth and controlled • Improves stability, cornering and traction • Eliminates front-end dive during aggressive braking and maneuvering • Firm feel for high-speed sweeping turns • Eliminates bottoming out on large bumps or potholes • Reduces dragging floorboards and pegs • Designed for optimum performance with Legend rear suspensions • Made in the U.S.A. PART # DESCRIPTION 0414‑05911 For 88‑92 XL (39mm forks) (std.) 1 This kit is designed to be used with OEM upper fork tubes. AXEO 39TS HIGH-PERFORMANCE FRONT END SUSPENSION SYSTEMS • Innovative through-shaft design is first of its kind in front fork application, not like others offering spring drop-in or nitrogen • Easily installs in a few simple steps • Includes two mono-tube, damper cartridges • Unique through-shaft technology so there is no pressure at end of stroke • Utilizes a two-stage management system controlling fluid flow and high pressure • Compression and rebound flow rate is managed via highflow damper piston and deflective disc set • Secondary high-pressure control system, using precision loadrated wave springs, allowing spike overpressure to bypass, protecting the deflective disc’s precision valve opening limits • Through shaft eliminates the rod pressure in-andout issues, plus piston rod is always in fluid • Two precision linear bearings support both sides of the rod and piston assembly • Proprietary performance mainspring • Machined 303 stainless threaded preload adjuster • Increased preload range allows fine tuning for various riding styles and weights • 5” of travel • Ride quality is smooth and controlled • Improves stability, cornering and traction • Eliminates front-end dive during aggressive braking and maneuvering • Firm feel for high-speed sweeping turns • Eliminates bottoming out on large bumps or potholes • Reduces dragging pegs • Designed for optimum performance with Legend rear suspension system • Includes Maxima Racing Oil in cartridge and quart bottle • Maintains stock hydraulic bump stop • Purchase of new fork cups recommended or installer will have to remove from stock forks • Made in the U.S.A. NOTE: Not compatible with all models, check fitment chart on www.dealer.dragspecialties.com. NOTE: Due to the nature of the design, these front-end kits will raise the overall ride height of the motorcycle. 0414‑0591
RkJQdWJsaXNoZXIy NDI5NTY=