THE DRAG SPECIALTIES OCTOBER 2023 dragspecialties.com KHROME WERKS The popular Instigator air cleaners from Khrome Werks are now available in a chrome design for M-Eight Softails and Touring bikes. The classic design features a brilliant chrome finish, reusable black cotton filter element and a one-piece aluminum backplate with a hidden breather and an oil catch can for a clean look. 2-INTO-1 SYSTEM WITH THREE-STEP HEADERS • Designed to increase horsepower and torque while providing an aggressive, low-frequency sound level • 1.75” to 1.875” to 2” high-flow, 16-gauge, stepped primary headers with a 2.5” collector • 4.5” diameter, 16-gauge HP-Plus muffler with 2.5” inlet • Removable 1.5” absorptive baffle with 3” reverse cone outlet to maximize torque; baffle is wrapped in stainless steel wool and high-temp fiberglass for a rich mellow tone • 2.50”, 220°, 16-gauge heat shields • 18mm and 12mm O2 bungs welded into the primaries • Includes OEM-style muffler clamp and mounting hardware • Comes in an Eclipse finish; true black chrome • Optional Ghost pipe sold separately to give a 2-into-2 look • Made in the U.S.A. PART # DESCRIPTION 1800-2626 For 17-23 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK PART # DESCRIPTION 1861-1672 Optional Ghost pipe INSTIGATOR AIR CLEANER KITS • Inspired by two of Khrome Werks’™ most popular designs: Tracer and Klassic • Comes in a chrome finish • Reusable black cotton element is protected by stainless steel mesh • One-piece aluminum backplate with hidden breather • The M-Eight model contains an oil catch can PART # DESCRIPTION FOR 17-23 FLHT/FLHR/FLTRX/FLTRU/HD TRIKE AND 18-23 SOFTAILS 1010-3166 Klassic 1010-3168 Tracer FOR 08-16 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKE, 16-17 SOFTAILS, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE, AND 16-17 FXDLS 1010-3167 Klassic 1010-3169 Tracer RIPPER SUPER BIKE 2-INTO-1 EXHAUST SYSTEM • Stepped headers – 13/4” to 17/8” designed for maximum performance and more ground clearance • Utilizes an advanced inner collector for maximum performance • Upswept Super Bike 4” stainless muffler body with aluminum end cap and a new removable conical performance baffle delivers an all new aggressive exhaust sound • Stainless steel construction with a stainless steel finish • Hand TIG welded • Includes 18mm O2 bungs for tuning, 12mm adapters and plugs • Full coverage stainless heat shields for the front and rear header pipes included PART # DESCRIPTION 1810-3129 For 22-23 Chief models 1800-2626 1861-1672 1010-3166 1010-3169
OCTOBER 2023 THE DRAG SPECIALTIES dragspecialties.com 2 SAFETY WARNING: WHEN SELECTING CUSTOMWHEELS,THE TIRES USED FOR YOUR APPLICATION MUST HAVE A LOAD INDEX AND SPEED RATING EQUAL TO OR GREATER THAN THE TIRES FITTED AS ORIGINAL EQUIPMENT. CONSULT MANUFACTURER’S PUBLICATION(S) AND/OR WEBSITE(S) FOR COMPLETE TIRE INFORMATION. DESCRIPTION FINISH HURRICANE ATLANTIC LARGO MARLIN FRONT WHEELS 21" x 3.5" for 08-22 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK, w/ ABS Chrome 0201-2399 0201-2401 0201-2395 0201-2386 Black cut 0201-2400 0201-2403 0201-2396 0201-2390 Solid black - 0201-2402 - 0201-2388 21" x 3.5" for 08-19 FLHT/FLHR/FLHX/FLTRX, w/o ABS Chrome - - - 0201-23871 Black cut - - - 0201-23911 Solid black - - - 0201-23891 21" x 3.5" for 00-07 FLHT/FLHR/FLHX/FLTRX, w/o ABS Chrome - - - 0201-23921 Black cut - - - 0201-23941 Solid black - - - 0201-23931 REAR WHEELS 18" x 5.5" for 09-22 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK, w/ ABS Chrome - 0202-2187 0202-2190 0202-2179 Black cut 0202-2186 - 0202-2191 0202-2183 Solid black - 0202-2188 - 0202-2181 18" x 5.5" for 09-19 FLHT/FLHR/FLHX/FLTRX, w/o ABS Chrome - - - 0202-21801 Black cut - - - 0202-21841 Solid black - - - 0202-21821 1 Not compatible with TPMS. PRECISION CAST 3D WHEELS • "Cast" one-piece design wheels at a fraction of the cost of billet or forged wheels • Includes bearings and valve stems installed by Coastal Moto • Wheels are designed to accept lug-mounted OEM or aftermarket 14-22 FL Touring-style front rotors (sold separately) • Rear wheel hub accepts stock cush-drive, pulley and brake rotor • Available for ABS models • ABS style features intelligent ABS bearings that are "linked brake ready"; no ABS system reprogramming required • Accept the H-D TPMS (Tire Pressure Monitoring System) • For additional Precision-Cast Custom 3D wheels, see pages 1399-1400 of the 2023 Parts Canada FatBook Atlantic Black Cut Atlantic Solid Black Hurricane Black Cut Largo Black Cut Marlin Black Cut Marlin Solid Black Hurricane Chrome Largo Chrome Atlantic Chrome Marlin Chrome
OCTOBER 2023 THE DRAG SPECIALTIES 3 dragspecialties.com SAFETY WARNING: WHEN SELECTING CUSTOMWHEELS,THE TIRES USED FOR YOUR APPLICATION MUST HAVE A LOAD INDEX AND SPEED RATING EQUAL TO OR GREATER THAN THE TIRES FITTED AS ORIGINAL EQUIPMENT. CONSULT MANUFACTURER’S PUBLICATION(S) AND/OR WEBSITE(S) FOR COMPLETE TIRE INFORMATION. FORGED BILLET RIMS • All rims are CNC-machined from radial forged 6061-T6 aluminum for maximum road durability and strength-to- weight ratio • Features a rolled rim lip for the custom look and detailed CNC machine work from the center of the hub to the edge of the rim • Rims can be used on both front and/or rear applications when correct hub kit is installed (sold separately) • Rims accept Arlen Ness hub kits (sold separately), which allow full wheels to DESCRIPTION DRIFT CHROME DRIFT BLACK PROCROSS ALL BLACK KICKBACK BLACK SPEED-5 ALL BLACK FRONT RIMS 19" x 3.25" - - - - 0210-0404 21" x 3.50" 0210-0396 0210-0395 0210-0407 0210-0400 0210-0405 REAR RIMS 18" x 5.50" 0210-0394 0210-0393 0210-0406 0210-0399 0210-0403 ONE-PIECE ALUMINUM WHEELS • These forged wheels place the highest material strength in the same direction as the operating load, creating a light and strong wheel • Feature the contour rim lip for a graceful arc from rim to lip • Made in the U.S.A. • See page 1402 of the 2023 Parts Canada FatBook for more Performance Machine One-Piece Aluminum Wheel options NOTE: Front wheels listed as fitting 14-19 Dresser models will require the use of PM front brake rotors (3.25” bolt circle). NOTE: For matching pulleys and rotors see TRANSMISSION & DRIVELINE and BRAKES sections. NOTE: 14-19 FLHT/FLHR/FLHX front wheels include fender relocation brackets for use with stock front fenders. NOTE: 09-13 FLHT/FLHR/FLHX/FLTR front applications require the use of the OEM spacers. DESCRIPTION SIERRA FRONT WHEELS 21" X 3.5" FOR 14-21 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK w/ ABS (dual disc) 0201-2383 21" X 3.5" FOR 14-21 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK w/o ABS (dual disc) 0201-2382 REAR WHEELS 18" x 5.5" for 09-21 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK w/ ABS 0202-2176 18" x 5.5" for 09-21 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK w/o ABS 0202-2175 be assembled in minutes with basic tools • Structurally tested to meet or exceed DOT, JAS and TUV international load ratings • Please see page 1401 of the 2023 Canada FatBook for the entire line of Arlen Ness Forged Billet Rims NOTE: Arlen Ness hub kits must be purchased separately to install. Please see page 1401 of the 2023 Canada FatBook for required hub kits. 0210-0395 0210-0396 0210-0400 0210-0403 0210-0407
OCTOBER 2023 THE DRAG SPECIALTIES dragspecialties.com 4 BILTWELL INC. If you are packing for just the day, or a month on the road, Biltwell has the bags to fit your needs. The Exfil series luggage has a wide range of bag sizes with all the key features riders want for tough, rugged and versatile motorcycle luggage. Tool rolls to sissy bar bags, your gear will travel in style and keep you looking stylish when packed for a trip across town or across the country. EXFIL-80 2.0 BAG • Roll-top closure with hook-and-loop material and side release buckles • PVC-backed for increased water resistance • UV-treated 1680D ballistic polyester • Hi-viz orange interior liner • Three removable, 1.5” mounting straps with reflective stitching • Pass-thru zipper allows for opening the bag without unbuckling it from the bike • Larger backrest pad, and more robust buckles/straps throughout • Includes more rugged, built-in tool pouch • Tool compartment includes mesh pocket and a flat document pocket • Tool compartment holds nine deep sockets and seven combination wrenches (tools not included) • Waterproof sleeve in zippered compartment at base of bag • Five rows of MOLLE webbing for modular customization • SBS zippers • Shoulder strap included • Holds up to 80 12 oz. cans • Contents not included • Overall dimensions (when full and closed): 14” W x 12” D x 20” T PART # DESCRIPTION 3515-0238 EXFIL-80 2.0 bag EXFIL-60 2.0 BAG • Roll-top closure with reinforced nylon quick-release buckles • UV-treated 1680D ballistic polyester nylon construction • PVC treatment on exterior panels increases weather resistance • High-viz orange interior liner • Three removable 1.5” wide mounting straps with reflective stitching provide multiple mounting options and added security • Convenient pouch behind the front flap keeps items secure but within easy reach • Outer and inner zippered pockets on front flap for extra storage • Seven rows of MOLLE webbing allow for modular customization and secondary gear attachment • Rugged SBS zippers • Padded nylon shoulder strap is removable and adjustable for easy portage • Improved cargo flap with hook-and-loop featuring laser-cut MOLLE exterior and rugged rip-stop pocket inside • Elastic shock cord near cargo flap keeps gear tidy • Holds up to 60 12 oz. cans • Contents not included • Overall dimensions (when full and closed): 14” W x 11” D x 18” T PART # DESCRIPTION 3516-0402 EXFIL-60 2.0 bag EXFIL-65 2.0 BAG • Roll-top closure with reinforced nylon quick-release buckles • UV-treated 500D sides and 1000D bottom are PVC-coated and waterproof • Woven reflective thread enhances nighttime visibility • MOLLE webbing allows for modular customization and secondary gear attachment • One-way valve releases air allowing for maximum compression • Universal fitment • Can hold up to 65 12 oz. cans • Closed dimensions: 22” H x 12” W EXFIL-0 2.0 TOOL ROLL • Built to hold all the on-the-road essentials and still fit into Biltwell’s Exfil-7 bag (Black PART #3516-0195 and Green PART #3516-0217 ) • Zippered pouch holds small loose stuff that most tool rolls don’t accommodate • Includes seven deep elastic socket holders and five angled wrench pockets • Pockets engineered from more durable rip-stop fabric • Two wider slots for pliers/wire cutters • Bundles together with expandable G-hook-and-loop closure system • Made from 600D abrasion-resistant polyester outer shell with high-viz orange interior lining • Dimensions: 91/4” W x 7” tall when folded; 181/2” W when flat NOTE: Tools not included. PART # DESCRIPTION 3516-0403 EXFIL-65 2.0 bag Back view Back view
OCTOBER 2023 THE DRAG SPECIALTIES 5 dragspecialties.com EXFIL-2 MINI TANK BAG • Compact size preserves your bike’s aesthetic but has enough room to hold all the essentials • UV-treated 1680D denier ballistic nylon exterior • High-powered magnets attach the bag securely to metal tanks • Lid features fleece-lined phone slot with touch-friendly clear panel for smart phone operation • Hi-vis orange nylon interior makes spotting contents easier • Hidden seam in front for routing charging cables • Attached carrying handle for easy portage • Main compartment holds two 12-ounce cans • Dimensions: 8” long x 5.5” wide (front) 4.5” wide (rear) x 4” tall (front) x 2” tall (rear) WARNING: Friction between the bag and the gas tank can cause paint scuffing. It is recommended to keep both the bag and tank clean from debris to minimize risk of damage. PART # DESCRIPTION 3502-0582 EXFIL-2 mini tank bag PART # DESCRIPTION FOR 84-99 FLST/FXST 3501-1000 Black w/ chrome buckle 3501-1001 Black w/ matte black buckle FOR 86-20 XL 3501-1002 Black w/ chrome buckle 3501-1003 Black w/ matte black buckle LEATHER SWINGARM BAGS • Full-grain Brazilian leather construction • Quick-release buckle closure with magnetic reinforcement • Installs with speedstrap hook-and-loop cable ties • Mounts on left-hand side of the bike • Dimensions: 10.5” L x 4.5” W x 11.5” H • Sold each • Made in the U.S.A. NOTE: Not for use with passenger floorboards or passenger footpegs. 3501-1000 3501-1001 SWINGARM BAGS WITH BRASS BUCKLES • Made of 100% leather • Measure 10.5” L x 11.5” W x 4.5” H • Made in the U.S.A. PART # DESCRIPTION 3501-1736 For 84-17 FXST/FXSTD/FXSTS/FXSTSI/FLS/FLSTN/FLSTSB/FXCWC models
OCTOBER 2023 THE DRAG SPECIALTIES dragspecialties.com 6 PLUG-AND-PLAY EZ INSTALL 11/2” FLAT TOP HANDLEBAR KITS • Plug-and-play EZ Install handlebar kits include everything needed to install our handlebars in half of the time of other kits - just remove the handlebars from the box and plug them into your motorcycle • Handlebars now come pre-wired for your handlebar controls; now include a Genuine Harley-Davidson throttle-by-wire sensor installed • Our top corner feature is a non-welded corner we machine from a billet steel with a smooth internal wire cavity that won’t damage the internal wiring • Adjustable 11/2” collar next to handlebar controls for a custom finished look • CNC mandrel bent from 11/2” diameter x .095” wall heavy tube • Bolt-together, two-piece handlebar that takes up half the shelf space and is easy to ship • Designed to work with ABS and non-ABS models • Available in chrome or gloss black powdercoated finish • Made in the U.S.A. NOTE: All 2021-2022 kits will include black brake lines and black clutch extensions. NOTE: Our handlebar kits do not replace existing lines and cables. We extended them. NOTE: Accepts OEM heated grips. NOTE: Heated grip extensions sold separately. NOTE: U.S. Patent No. 10,946,926. CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 21-23 FLTRX/S/ST, FLTRK, FLTRU (CABLE CLUTCH, 11/4” CLAMPING AREA) 0601-6095 0601-6096 12” 35” 101/4” 8” 0601-6097 0601-6098 14” 35” 101/4” 8” 0601-6099 0601-6100 16’ 35” 101/4” 8” 0601-6095 0601-6100 PLUG-AND-PLAY EZ INSTALL 11/4” FLAT TOP HANDLEBAR KITS • Plug-and-play EZ Install handlebar kits include everything needed to install our handlebars in half of the time of other kits - just remove the handlebars from the box and plug them into your motorcycle • Handlebars now come pre-wired for your handlebar controls; now include a Genuine Harley-Davidson throttle-by-wire sensor installed • Our top corner feature is a non-welded corner we machine from a billet steel with a smooth internal wire cavity that won’t damage the internal wiring • CNC mandrel bent from 11/4” diameter x .120” wall heavy tube • Bolt-together, two-piece handlebar that takes up half the shelf space and is easy to ship • Designed to work with ABS and non-ABS models • Available in chrome or gloss black powdercoated finishes • Gloss black bars come with black lines/cable extensions, chrome bars come with braided lines/cable extensions (unless noted) • Made in the U.S.A. NOTE: All 2021-2023 kits will include black brake lines and black clutch extensions. NOTE: Our handlebar kits do not replace existing lines and cables. We extended them. NOTE: Accepts OEM heated grips. NOTE: Heated grip extensions sold separately. NOTE: U.S. Patent No. 10,946,926. CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 21-23 FLTRXS/ST, FLTRK (11/4” CLAMPING AREA) 0601-6131 0601-6132 14” 35” 101/4” 8” 0601-6133 0601-6134 16’ 35” 101/4” 8” FOR 16-20 FLHT, FLHTC, FLHTCU, FLHTK, FLHX AND H-D FL TRIKE (1” CLAMPING AREA) 0601-6107 0601-6108 12” 36” 151/2” 9” 0601-6109 0601-6110 14” 36” 151/2” 9” 0601-6111 0601-6112 16’ 36” 151/2” 9” FOR 14-15 FLHT, FLHTC, FLHTCU, FLHTK, FLHX AND H-D FL TRIKE (1” CLAMPING AREA) 0601-6101 0601-6102 12” 36” 151/2” 9” 0601-6103 0601-6104 14” 36” 151/2” 9” 0601-6105 0601-6106 16’ 36” 151/2” 9” 0601-6112 0601-6131
OCTOBER 2023 THE DRAG SPECIALTIES 7 dragspecialties.com SLYFOX Aggressive style that gives your ride a performance edge - SlyFox. Their new handlebar styles come in aggressive MX-style bends and heights to give your bike a cool performance look and feel. The bars feature a laser-etched SlyFox logo an for added wow factor when parked up at your favorite hangout. 11/8” BAR • Bars feature a 11/8” diameter in the clamping area that tapers to 1” in the grip area • Works with any 11/8” risers and top clamp (sold separately) • Available in black with a laser-etched SlyFox logo • 31/2” on-center knurling • Notched for Throttle-by-Wire • Accepts heated grips • Made in the U.S.A. PART # END RISE WIDTH CENTER WIDTH PULLBACK 0601-6245 4” 31” 51/4” 13/4” 1” HANDLEBARS • Aggressive profile motocross-style bars • Chrome or black finish with a laser-etched SlyFox logo • Slotted for internal wiring • 31/2” on-center knurling • 1” clamping area • Made in the U.S.A. CHROME PART # GLOSS BLACK PART # DESCRIPTION WIDTH END RISE CENTER WIDTH PULLBACK 0601-6238 0601-6239 Low bend 29.5” 2.5” 5.2” 1.75” 0601-6240 0601-6241 Mid bend 29.5” 3.5” 5.2” 2” 0601-6239 0601-6240
OCTOBER 2023 THE DRAG SPECIALTIES dragspecialties.com 8 VANS® V-TWIN LOCK-ON GRIPS • The Vans® V-Twin Lock-On Grip System features the classic Vans waffle sole pattern and is built to deliver an amazing riding experience • 100% slip-free performance guaranteed • In-molded throttle tube with integrated application-specific throttle actuation • Billet aluminum Lock-On™ style clutch side clamp eliminates the need for grip glue or safety setscrews, providing simple installation and removal • T15 Torx bolts provide extra secure clamping for solid, twist-free mounting • Proprietary medium-compound durometer improves overall comfort and durability • 130mm overall grip length with flange • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION FOR 08-23 FLHT/FLHR/FLTR/FLHX, H-D FL TRIKE, 16-23 SOFTAILS, 20-23 ELW, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE, 16-17 FXDLS MODELS 0630-3042 Black 0630-3045 Graphite/Gunmetal 0630-3047 Gum/Black PART # DESCRIPTION FOR 99-17 TWIN CAM AND 86-22 XL MODELS (EXCEPT 08-17 DRESSERS, H-D FL TRIKE, 16-17 SOFTAILS, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE, 16-17 FXDLS, RH SPORTSTERS AND MODELS W/ AIR-ASSISTED FORKS) 0630-3036 Black 0630-3039 Graphite/Gunmetal 0630-3041 Gum/Black EXCALIBUR AIR CUSHIONED GRIPS • Feature billet end caps and rings with ergonomic Avon seamless rubber grip technology • Designed with a very soft, tacky and durable material • Fits 7/8” stacked handlebars • Black anodized finish • Made in the U.S.A. PART # DESCRIPTION 0630-3072 For all 14-17 Chieftain models 0630-3042 0630-3045 0630-3047
OCTOBER 2023 THE DRAG SPECIALTIES 9 dragspecialties.com BLACK VINYL/STAINLESS BRAIDED KITS AND COMPONENTS FITS MODEL DESCRIPTION STANDARD KITS REPL. CLUTCH CABLES FOR DRESSER MODELS FOR 21-23 FLTRX/FLTRXS/FLTRXST For use w mini handlebars 0662-1094 0652-2824 For use w/ 12” - 14” Ape Hangers 0662-1097 0652-2827 For use w/ 15” - 17” Ape Hangers 0662-1100 0652-2830 For use w/ 18” - 20” Ape Hangers 0662-1103 0652-2833 MIDNIGHT BRAIDED KITS AND COMPONENTS FITS MODEL DESCRIPTION STANDARD KITS REPL. CLUTCH CABLES FOR DRESSER MODELS FOR 21-23 FLTRX/FLTRXS/FLTRXST For use w mini handlebars 0662-1095 0652-2825 For use w/ 12” - 14” Ape Hangers 0662-1098 0652-2828 For use w/ 15” - 17” Ape Hangers 0662-1101 0652-2831 For use w/ 18” - 20” Ape Hangers 0662-1104 0652-2834 STAINLESS BRAIDED KITS AND COMPONENTS FITS MODEL DESCRIPTION STANDARD KITS REPL. CLUTCH CABLES FOR DRESSER MODELS FOR 21-23 FLTRX/FLTRXS/FLTRXST For use w mini handlebars 0662-1093 0652-2823 For use w/ 12” - 14” Ape Hangers 0662-1096 0652-2826 For use w/ 15” - 17” Ape Hangers 0662-1099 0652-2829 For use w/ 18” - 20” Ape Hangers 0662-1102 0652-2832 STANDARD HANDLEBAR CABLE KITS • Take “Cable Calculation” headaches out of swapping handlebars • Kit includes the correct length braided cables, brake/ clutch lines to complete a handlebar swap • Does not include any extended wiring • All cables and lines are stainless steel no matter the finish • Available in three finishes: stainless steel with clear shielding and chrome fittings, black vinyl with chrome fittings or midnight black with dark smoke-tinted shielding and pure black fittings • Midnight lines appear appear graphite or carbon in appearance for an ultra custom look • Made in the U.S.A. NOTE: Kits are based on using 2” risers with Ape Hanger handlebars. NOTE: LA Choppers Cables, Brake Lines, and Complete Kits are compliant with all DOT FMVSS-106 requirements. 0662-1093 0662-1094 0662-1095 REPLACEMENT PISTON RINGS • Available in standard and oversize versions • Napier taper face 2nd ring • Feature a PVD top ring • Made in the U.S.A. NOTE: Each PART # includes enough rings for two pistons. PART # DESCRIPTION FOR 107” M-EIGHT MOTORS 0912-0959 Standard 0912-0960 +.005 0912-0961 +.010 PART # DESCRIPTION FOR 114” M-EIGHT MOTORS 0912-0962 Standard 0912-0963 +.005 0912-0964 +.010 0912-0960
OCTOBER 2023 THE DRAG SPECIALTIES dragspecialties.com 10 VO2 AMERICA AIR INTAKE KITS • Crowned with a bold CNC-machined billet aluminum cover adorned with the stars & stripes and bolted down with ARP hardware • Force velocity stack with maximum flow and ease of installation • High flow washable air filter • Include backing plate, venturi and breather assemblies • Include mounting hardware and installation instructions • Made in the U.S.A. NOTE: CVO/114”/117” models and models with SE stage 1 air cleaners will require support bracket H-D part #16400049 to install. NOTE: Exempt per CARB EO# D-632-7 (07-22 models only) PART # DESCRIPTION FOR 17-23 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKE 1010-2994 Chrome FOR 08-16 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKES, 16-17 FXDLS, 16-17 SOFTAILS, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE MODELS 1010-2995 Chrome 1010-2991 Matte black FOR 18-23 SOFTAILS 1010-2994 Chrome PART # DESCRIPTION FOR 01-17 TWIN CAM W/ DELPHI EFI, 99-06 TWIN CAM MODELS W/ CV CARB (EXCEPT 08-17 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKES, 16-17 FXDLS, 16-17 SOFTAILS, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE) 1010-2996 Chrome 1010-2992 Matte black FOR 91-22 XL MODELS (EXCEPT RH SPORTSTER MODELS) 1010-2997 Chrome 1010-2993 Matte black 1010-2993 1010-2994 VO2 INSIGHT REPLACEMENT FILTER • High-Flow Oiled-Media Filter • Integrated polycarbonate window top • Embossed Vance & Hines logo • Black-dyed filter pleats PART # DESCRIPTION 1011-4719 Replacement VO2 Insight air filter VO2 FALCON AIR INTAKE KIT • Clean minimalist design of the VO2 Falcon yields a streamlined hot rod look that is equally powerful in its simplicity as it is in its performance • Developed for the performance-minded enthusiast looking for superior bolt-on power and torque • Washable high-flow oiled-media air filter with stamped Vance & Hines logo • Integrated breather assembly using 12-point stainless banjo bolts • The VO2 Falcon resets the bar for 90-degree intakes • Sleek forward-facing 90° intake design • Accessory pre-filter rain sock, PART #1011-4635 (sold separately, see the 2023 Drag Specialties FatBook) • Made in Santa Fe Springs • See page the 2023 Drag Specialties FatBook for additional Vance & Hines VO2 Falcon air intakes NOTE: Exempt per CARB Executive Order (E.O.) #D-632-6. NOTE: Will NOT Fit Twin cooled models or bikes with lower fairing and/or speaker pods. PART # DESCRIPTION FOR 17-23 FLHT/FLHR/FLHX/FLTRX/FLTRU/H-D FL TRIKES AND 18-23 SOFTAILS 1010-3170 Stainless Steel PART # DESCRIPTION REPLACEMENT AIR FILTERS 1011-4717 Chrome 1011-4718 Black 1011-4717 1011-4718 1010-3170
OCTOBER 2023 THE DRAG SPECIALTIES 11 dragspecialties.com 6-SPEED TRANSMISSION DOOR ASSEMBLY • Manufactured with 6061-T6 Aluminum • 28% wider bearings when compared to stock • The bearings are retained with a 6-bolt steel 1/8” plate, phantom clutch lever movement reduced by 90% • Installs with no modifications and includes mainshaft and countershaft nuts • A must have for any serious motor upgrade • Made in the U.S.A. PART # DESCRIPTION FOR 06-17 DYNA, 07-23 BIG TWIN MODELS 1107-0719 Polished PART # DESCRIPTION FOR 06-17 DYNA, 07-23 BIG TWIN MODELS (CONT) 1107-0720 Black 5-SPEED N1 SHIFT KIT • N1 shift pattern (neutral-1-2-3-4-5) was designed to prevent false neutrals during aggressive 1-2 upshifts by positioning neutral under 1st • Popular choice for jockey shift/foot clutch users • N1 drum used in conjunction with an electric shifter makes finding neutral (with the solenoid) seamless and yields a solenoid-actuated shift system that almost makes foot shifting obsolete • For 5-speed transmissions • Includes drum, pillow blocks, top cover gasket and fasteners • Made in the U.S.A. PART # DESCRIPTION 1110-0101 For 80-97 FLH/FLT/FLHT/FLHR, Dyna, Softail and 00 FLT/FLHT/FLHR/FLTR REPLACEMENT BEARINGS AND COMPONENTS FOR 5-SPEED BIG TWIN • Sold individually PART # DESCRIPTION 1106-0238 Countershaft bearing (closed end) for 80-06 Big Twin 1106-0239 Mainshaft/countershaft split-cage needle bearing (open end) for 80-06 Big Twin 1106-0240 Main drive gear needle bearing (open end) for 91-06 Big Twin 1106-0241 Main drive gear roller ball bearing for 85-06 Big Twin 1106-0242 Pulley/sprocket spacer seal for 94-06 Big Twin and XL 1106-0243 Transmission door bearing for 99-06 Big Twin 1106-0238 1106-0239 1106-0240 1106-0241 1106-0242 1106-0243 1107-0720 1107-0719
OCTOBER 2023 THE DRAG SPECIALTIES dragspecialties.com 12 GOLD FRONT BRAKE ROTOR • Direct fit rotor for 14-23 Harley Davidson Touring models with Prodigy or Enforcer wheels only • Also fits HD Aggressor front wheels when used with Enforcer-style bolt hats • Stainless steel, 11.8” spoke-mounted rotor with 5 bolt holes with 6.7” brake rotor PCD • Slotted rotor grooves improve performance under heavy braking by lowering brake fade from high-temperature brake pad outgassing, by allowing gases to escape through the slots, improving braking consistency • Sold each • Made in the U.S.A. PART # DESCRIPTION 1710-4490 For 14-23 FLHT/FLHR/FLHX/FLTR models (w/ Prodigy or Enforcer wheels only) STANDARD LENGTH REAR BRAKE LINE KITS • Features clear-coated stainless steel or black vinyl-coated braided lines with chrome steel fittings • Meets DOT specifications • Comes with chrome steel switch junction block and uses standard brake light switch (unless noted) • Made in the U.S.A. NOTE: All measurements are approximate. BLACK VINYL-COATED STAINLESS STEEL PART # FITS MODEL OEM # LENGTH FOR FLHT/FLHR/FLHX/FLTR MODELS 1741-6335 For 14-23 FLHT/FLHR/FLHX/FLTR w/ABS (master cylinder to ABS controller) does not include brake light switch 41800012 39” 1741-6337 For 14-23 FLHT/FLHR/FLHX/FLTR w/ABS (caliper to ABS controller) 41800541 - 1741-6339 For 14-19 FLHT/FLHR/FLHX/FLTR w/o ABS 41800175 - 1741-6341 For 09-13 FLHT/FLHR/FLHX/FLTR w/o ABS 40971-09 421/2” FOR FX/FL SOFTAIL MODELS 1741-6343 For 18-23 FLFB/S, FXBR/S, w/ABS (master cylinder to ABS controller) 41800602 - 1741-6345 For 18-23 FLFB/S, FXBR/S, w/ABS (caliper to ABS controller) 41800603 - 1741-6347 For 18-23 FLHC/S, FLSB, FLSL, FXBB/S, FXFB/S, FXLR/S, FXST w/ ABS (master cylinder to ABS controller) 41800598 - 1741-6349 For 18-23 FLHC/S, FLSB, FLSL, FXBB/S, FXFB/S, FXLR/S, FXST w/ ABS (caliper to ABS controller) 41800599 24” 1741-6351 For 18-23 FLSL, FLFB/S, FXFB/S, FXLR/S, FXBB/S, FXST w/o ABS 41800607 - 1741-6353 For 11-17 FXST/FLST w/o ABS - does not include brake light switch 42261-11A 503/4” CLEAR-COATED STAINLESS STEEL PART # FITS MODEL OEM # LENGTH FOR FLHT/FLHR/FLHX/FLTR MODELS 1741-6334 For 14-23 FLHT/FLHR/FLHX/FLTR w/ABS (master cylinder to ABS controller) does not include brake light switch 41800012 39” 1741-6336 For 14-23 FLHT/FLHR/FLHX/FLTR w/ABS (caliper to ABS controller) 41800541 - 1741-6338 For 14-19 FLHT/FLHR/FLHX/FLTR w/o ABS 41800175 - 1741-6340 For 09-13 FLHT/FLHR/FLHX/FLTR w/o ABS 40971-09 421/2” FOR FX/FL SOFTAIL MODELS 1741-6342 For 18-23 FLFB/S, FXBR/S, w/ABS (master cylinder to ABS controller) 41800602 - 1741-6344 For 18-23 FLFB/S, FXBR/S, w/ABS (caliper to ABS controller) 41800603 - 1741-6346 For 18-23 FLHC/S, FLSB, FLSL, FXBB/S, FXFB/S, FXLR/S, FXST w/ ABS (master cylinder to ABS controller) 41800598 - 1741-6348 For 18-23 FLHC/S, FLSB, FLSL, FXBB/S, FXFB/S, FXLR/S, FXST w/ ABS (caliper to ABS controller) 41800599 24” 1741-6350 For 18-23 FLSL, FLFB/S, FXFB/S, FXLR/S, FXBB/S, FXST w/o ABS 41800607 - 1741-6352 For 11-17 FXST/FLST w/o ABS - does not include brake light switch 42261-11A 503/4” 1741-6335 1741-6336 1741-6349 1741-6350
OCTOBER 2023 THE DRAG SPECIALTIES 13 dragspecialties.com CLUTCH MASTER CYLINDER REBUILD KIT • Meets or exceeds OEM specifications PART # DESCRIPTION 0617-0404 For 14-16 FLHT, FLHX and FLTRX models; repl. OEM #3720096B PLUG-AND-PLAY FRONT TURN SIGNAL EXTENSION HARNESS • Plug-and-play solution for extending the OEM front turn signal wires • Easily allows for relocation of OEM turn signal housings when handlebars are upgraded • Plug and play JAE connectors are offered with 4 different lengths and color matched wire colors • Harnesses easily plug in-line with left and right OEM turn signal connections extending the wire length for relocation PART # DESCRIPTION FOR 18-23 FLFB/FLFBS, 16-21 FLS/FLSL, 16-17 FLSTF/FLSTFBS/FLSS/FXSE, 16-21 FXSB, 23 FXBR, 18-23 FXLR/FXLRS, 21-23 FXST, 18-23 FXBB/FXBBS/ FXFB/FXFBS 2120-1224 +4” 2120-1225 +8” PART # DESCRIPTION FOR 18-23 FLFB/FLFBS, 16-21 FLS/FLSL, 16-17 FLSTF/FLSTFBS/FLSS/FXSE, 16-21 FXSB, 23 FXBR, 18-23 FXLR/FXLRS, 21-23 FXST, 18-23 FXBB/FXBBS/ FXFB/FXFBS (CONT) 2120-1226 +12” 2120-1227 +15” PROBEAM® AMBER LED ROADGLIDE FRONT TURN SIGNALS • Aluminum housings with a gloss black finish • DOT/SAE compliant • Plug-and-play for easy installation • Sold in pairs PART # DESCRIPTION 2020-2160 For 15-23 FLTRX/FLTRU/FLTRK/FLTRXS/FLTRXST/FLTRKSE/ FLTRXSE/FLTRUSE/FLTRT models TRUBEAM® 41/2” YELLOW PASSING LAMPS • 10 watt CREE XML LEDs • Polycarbonate lens for light weight • 5X brighter than stock • 5800K light color temperature • Plug-and-play 881 connectors • BCM compliant • Passing lamp harnesses (allow passing lamps to remain on when headlamp is switched to high beam) available separately (PART # 2001-1266) • 84-04 HD models require PART #2001-1266 • Sold in pairs PART # DESCRIPTION 2001-2685 41/2” Passing lamps 2120-1224 2120-1225 2120-1226 2120-1227
OCTOBER 2023 THE DRAG SPECIALTIES dragspecialties.com 14 VERTICAL FRAME-MOUNT OIL COOLER KITS Installation time measured in minutes Extra riding time measured in years • Cooler oil makes engines last longer – simple as that! • Jagg oil coolers feature cutting-edge technology to keep your engine cool under the most punishing conditions • And because they’re designed to look as good as they perform, they’ll perfectly complement your bike’s style • Hoses and clamps are included with oil cooler kits Engineered to perform • Multipass oil flow configuration ensures the oil’s utilization of the entire oil cooler • Specially designed turbulators in each oil passageway gently stir oil, exposing it to more critical heat dissipation surface area for superior cooling with minimal oil pressure restriction • Highly concentrated mini-louvered air fins allow maximum heat transfer • Made in the U.S.A. NOTE: Vertical oil coolers do not fit touring models with lower fairings. NOTE: Ten-row coolers are recommended for 95” and larger motors. PART # DESCRIPTION FOR 84-16 TOURING (EXCEPT TWIN-COOLED™ MODELS), 84-17 SOFTAIL, 91-17 DYNA AND 86-98 XL MODELS 0713-0272 Deluxe 6-row 0713-0273 SlimLine 6-row 0713-0275 WideLine 10-row 0713-0272 0713-0275 0713-0273 LOW-MOUNT FAN-ASSISTED OIL COOLER KITS • Feature the Jagg high-performance 10-row oil cooler kit with an integrated fan • Designed to perform as well at low vehicle speeds and stop-and-go traffic as on the open highway • Kits include oil cooler, oil hose, mounting hardware, automatic thermal fan switch wiring harness, Jagg offset oil filter adapter and hose clamps • Fan turns on automatically at approximately 205°F • Fan pulls a full 150 cfm of air across cooler • HyperFlow technology ensures unsurpassed flow and heat rejection • Made in the U.S.A. PART # DESCRIPTION 0713-0279 For 09-16 FLHT/FLHX/FLHR/FLTR and FL Trike models (except Twin-Cooled™ models) 0713-0277 For 84-08 FLHT/FLHX/FLHR/FLTR and FL Trike models 0713-02811 For 91-17 Dyna models 1 California models require relocation of emissions canister. 0713-0277 0713-0281
OCTOBER 2023 THE DRAG SPECIALTIES 15 dragspecialties.com FRONT FENDER COVER • Protective cover for vehicle service • Durable black vinyl • Fits most Softail, Touring and Trike models PART # DESCRIPTION 4001-0248 Front fender cover OIL COOLERS Installation time measured in minutes Extra riding time measured in years • Cooler oil makes engines last longer – simple as that! • Jagg oil coolers feature cutting-edge technology to keep your engine cool under the most punishing conditions • And because they’re designed to look as good as they perform, they’ll perfectly complement your bike’s style • All kits are supplied with all components for easy installation on models listed Engineered to perform • Multipass oil flow configuration ensures the oil’s utilization of the entire oil cooler • Specially designed turbulators in each oil passageway gently stir oil, exposing it to more critical heat dissipation surface area for superior cooling with minimal oil pressure restriction • Highly concentrated mini-louvered air fins allow maximum heat transfer • Available in black • Made in the U.S.A. 0713-0276 0713-0280 VERTICAL FRAME-MOUNT FAN-ASSISTED KIT • Features the Jagg high-performance 10-row oil cooler kit with an integrated fan • Designed to perform as well at low vehicle speeds and stop-and-go traffic as on the open highway • Kit includes cooler, sealed-motor fan, oil hose, mounting hardware, automatic thermal fan switch wiring harness and Jagg offset oil filter adapter • Fan turns on automatically at approximately 205°F • Fan pulls a full 150 cfm of air across cooler • HyperFlow technology ensures unsurpassed flow and heat rejection • Made in the U.S.A. PART # DESCRIPTION 0713-0282 For 84-16 Dresser (except Twin-Cooled™ models), 84-17 Softail, 91-17 Dyna and 89-98 XL (except models w/ ABS) PART # DESCRIPTION 10-ROW HORIZONTAL LOW-MOUNT OIL COOLERS 0713-0278 For 09-16 FLHT/FLHR/FLTR/FLHX (except for Twin-Cooled™ models) w/o Original Equipment oil cooler 0713-0276 For 84-08 FLHT/FLHX/FLHR/FLTR 0713-02801 For 91-17 FXD/FXDWG PART # DESCRIPTION 6-ROW HORIZONTAL LOW-MOUNT OIL COOLERS 0713-0274 For 00-17 FXS/FXST/FLS/FLST 1 California models require relocation of emissions canister. FUEL TANK SERVICE COVER • Designed to protect the tank when doing service • Durable black vinyl • Fits Dyna, Softail, Touring and Trike models PART # DESCRIPTION 4001-0249 Fuel tank service cover
OCTOBER 2023 THE DRAG SPECIALTIES dragspecialties.com 16 METHOD NO FLEX INVERTED FORK LEGS • Racing inspired design with integrated performance features that help elevate the style and handling of Touring models • Integrated “No Flex” fork brace flows seamlessly with the lines of the fork legs while adding stability and rigidity to the front end • CNC-machined from billet aluminum with a chrome finish • 12-point style axle nuts with laser logo • Dual disc design • Designed for use with 11.8” brake rotors • Accept factory brake calipers or custom radial mount brake calipers • Radial caliper legs include 100mm caliper brackets • Designed for 18” to 19” front wheels (21” front wheels may require spacers for fork brace) • Fits 14-23 factory and custom front fenders • Include a set of fork seals, billet dust seal covers and steel axle METHOD +2” DROP TRIPLE TREE KIT • Complete triple tree kit CNC-machined from billet aluminum featuring a drop design • Drop tree design adds extra height to the front end (+2”) while keeping proper geometry for optimum handling • Method design allows you to add aftermarket risers or T-bar handlebars to Road Glide models • Features a direct bolt-on design that does not require you to relocate your factory ignition switch assembly or remove factory fork lock when installing custom risers • Integrated ignition switch cover design allows you to decide whether to keep factory ignition location or relocate it for a full custom look (Method Ignition Switch Cover PART #2106-0590; sold separately) • Includes top tree, lower tree, lower stem with bearing installed, fork nut cover and mounting hardware • Chrome finish METHOD TRIPLE TREE KIT • Complete triple tree kit CNC-machined from billet aluminum with a chrome finish • Allows the installation of Arlen Ness Method or other aftermarket risers to Road Glide models • Direct bolt-on design, does not require you to relocate your factory ignition switch assembly or remove factory fork lock when Method Ignition Switch cover is added • Top tree design also allows relocation of factory ignition switch assembly for riders who want a custom look • Accepts factory or aftermarket handlebar risers or bushings • Accepts OEM upper stem assembly and bearings • Includes top tree, lower tree, lower stem with bearing installed, fork nut cover and mounting hardware NOTE: This kit utilizes the stock upper stem assembly. PART # DESCRIPTION FOR 14-23 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK MODELS W/ 49MM FORKS 0403-0175 For use w/ factory brake calipers (not for use w/ caliper adapters) 0403-0176 For use w/ custom radial mount brake calipers PART # DESCRIPTION 0408-0443 For 15-23 FLTRX/FLTRU/FLTRK PART # DESCRIPTION 0408-0444 For 15-23 FLTRX/FLTRU/FLTRK MID-CONTROLS FOR BAGGER MODELS • Increases ground clearance for aggressive riding • Innovative control design utilizes the factory foot control mounts • Using factory foot control mounts instead of mounting to the engine allows for less vibration • Each control arm is CNC-machined from billet aluminum, while the control mounts are made from CNC-bent steel for durability and factory like fit • Kits include both brake and shift side control assemblies (footpegs and shift pegs are NOT included) • Accepts any male mount footpegs or H-D Big Twin shift/brake pegs • Will work with stock exhaust • Black anodized PART # DESCRIPTION 1623-0577 For 14-23 FLHT/FLHR/FLHX/FLHXST/FLTRX/FLTRXST/ FLTRU/FLTRK 0403-0175
OCTOBER 2023 THE DRAG SPECIALTIES 17 dragspecialties.com METHOD +2 DROP TOP TRIPLE TREE • Triple tree CNC-machined from billet aluminum featuring a drop design • Drop tree design adds extra height to the front end (+2”) while keeping proper geometry for optimum handling • Method tree allow you to add aftermarket risers or T-bar handlebars to Road Glide models • Innovative ignition switch cover design allows you to decide whether to keep the factory ignition switch location or relocate for a full custom look • Method billet ignition switch cover PART #2106-0590 is recommended (sold separately) when keeping factory ignition switch location for a finished look and factory fork lock function • Includes top tree, fork nut cover and mounting hardware • Chrome finish METHOD TOP TRIPLE TREE • CNC-machined from 6061 billet aluminum with a chrome finish • Lightweight design features Method styling and cut through windows • Direct bolt-on fitment accepts all factory front end components • Complements Ness Method Riser and Ignition kits for Road Glides for a full custom front end look with factory function • Includes top tree, fork nut cover and mounting hardware PART # DESCRIPTION 0408-0441 For 15-23 FLTRX/FLTRU/FLTRK PART # DESCRIPTION 0408-0442 For 15-23 FLTRX/FLTRU/FLTRK
RkJQdWJsaXNoZXIy NDI5NTY=