VANCE & HINES Vance & Hines continues to make the most beautiful, distinctive exhaust systems and accessories for American V-Twin motorcycles. From boulevard-cruising M-Eight Softails to the new Revolution Max 1250 Pan America, Vance & Hines makes pipes that make power and add an authoritative exhaust note to your ride. PART # DESCRIPTION 1800-2577 Brushed stainless steel PART # DESCRIPTION 1800-2578 Black HI-OUTPUT 2-INTO-1 SHORT STAINLESS STEEL EXHAUST SYSTEMS* • PCX™ (Power Chamber Exhaust) technology • Chambered high-flow catalyst cartridge designed to increase torque • Lightweight, high-grade 304 stainless steel with a black finish • Hand TIG-welded • 49-state emissions compliant 1800-2577 FOR 18-23 FXFB/FXBB/FLSL/FLDE/FXLR/FXLRST/FLSB/FLHC/FXST MODELS (EXCEPT FLFB/FXBR/FXDRS) • Include mounting hardware and installation instructions • Made in the U.S.A. • See page 516 of the 2023 Drag Specialties FatBook for the complete line of Vance & Hines Hi-Output 2-into-1 Short Stainless Steel Exhaust Systems for Softail NOTE: Not for use with saddlebags. 1800-2578 THE DRAG SPECIALTIES APRIL 2023 dragspecialties.com
APRIL 2023 THE DRAG SPECIALTIES dragspecialties.com 2 PART # DESCRIPTION FOR 17-23 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKES 1010-2983 Chrome 1010-2987 Matte black FOR 08-16 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKES, 16-17 FXDLS, 16-17 SOFTAILS, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE MODELS 1010-2984 Chrome 1010-2988 Matte black FOR 18-23 SOFTAILS 1010-2983 Chrome 1010-2987 Matte black PART # DESCRIPTION FOR 01-17 TWIN CAMW/ DELPHI EFI, 99-06 TWIN CAM MODELS W/ CV CARB (EXCEPT 08-17 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKES, 16-17 FXDLS, 16-17 SOFTAILS, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE) 1010-2985 Chrome 1010-2989 Matte black FOR 91-22 XL (EXCEPT 21-22 SPORTSTER S/RH1250S AND 22 NIGHTSTER/RH975) 1010-2986 Chrome 1010-2990 Matte black VO2 ELIMINATOR AIR INTAKES • The distinctive formed cover emulates the CNC-machined pockets of our most recognized billet end caps used on Vance & Hines racing motorcycles from flat track to road racing • Improved performance over stock • Stamped cover featuring the Vance & Hines V-twin logo • Force velocity stack with maximum flow and ease of installation • High flow washable air filter • Include backing plate, venturi and breather assemblies Include mounting hardware and installation instructions NOTE: Exempt per CARB Executive Order (E.O.) #D-632-7 on 07-22 EFI models only. NOTE: CVO/114"/117" models and models with SE stage 1 air cleaners will require support bracket H-D part #16400049 to install. 1010-2985 1010-2987 ADVENTURE HI-OUTPUT 450 SLIP-ON MUFFLER • Designed specifically for the Revolution Max 1250 motor, the Vance & Hines Adventure Hi-Output 450 delivers a strong increase in horsepower and torque versus the bike's stock Revolution Max exhaust system while reducing overall weight of exhaust by approximately 6 lb. • Cutting-edge baffle design delivers bold rumble while meeting J2825 decibel levels • 41/2" dia. slip-on delivers over 5 hp and 5' lb. torque • CNC-machined billet end cap; black finish • Compatible with Harley-Davidson factory saddlebags and centerstand • 50-state emissions compliant • All necessary instructions and hardware included • Made in the U.S.A. NOTE: Qualified Manufacturer Declared replacement part. PART # DESCRIPTION 1801-1535 For 21-23 Pan America RA1250/1250S
APRIL 2023 THE DRAG SPECIALTIES 3 dragspecialties.com FOR 14-22 CHIEFTAIN, 16-22 CHIEFTAIN DARK HORSE, 17-22 CHIEFTAIN ELITE/LIMITED, 18-20 CHIEFTAIN CLASSIC, 20-22 CHALLENGER/CHALLENGER LIMITED/DARK HORSE PART # DESCRIPTION SLASH CUT 1801-1764 Black 1801-1765 Chrome FISHTAIL 1801-1766 Chrome BROADHEAD 4" SLIP-ON MUFFLERS • Sleek look and classic style • Slash-cut or fishtail style end caps available • Removable dB reducer is J2825 compliant • Sold in pairs • Made in the U.S.A. NOTE: Q ualified Manufacturer Declared Emissions replacement part on 2020-2022 Indian Challenger and Chieftain Touring models. GNX 4.5" OD SLIP-ON MUFFLERS • Muffler bodies measure a full 4.5" OD • Premium fit, finish, sound and power • Unique louvered baffle delivers a more aggressive tone, even with stock head pipes • S&S racing heritage-styled end caps with a tuxedo black finish • SAE J2825 Sound Level Compliant (with included dB installed); dB reducer is removable 1801-1764 1801-1768 1801-1767 1801-1766 • Sold in pairs • Made in the U.S.A. NOTE: Qualified Manufacturer Declared 50-State legal emissions replacement part on all 1995-2016 FL Touring models. FOR 95-16 FLHT/FLTR/FLHR/FLHX MODELS PART # DESCRIPTION 1801-1767 Guardian black 1801-1768 Chrome
APRIL 2023 THE DRAG SPECIALTIES dragspecialties.com 4 LE PERA Add comfort and class with a sissy bar pad from Le Pera. Smooth, pleated, Maverick and GT1 style stitch patterns are available. The pads are sized to fit standard and tall OEM sissy bar uprights. They mount with a secure threepoint fastening system (hardware available separately). The sissy bar pads are proudly made in the U.S.A. SISSY BAR PADS • Sized to fit standard-height and tall H-D 0822 Touring sissy bar uprights, can also be used on both low and standard-height H-D 18-22 Softail Holdfast Sissy Bar Uprights • Mounting hardware is not included; will work with LePera Dead End Sissy Bar Bracket Kits PART #s 08200198, 020-0199 and 0820-0200 (sold separately) • 11½" W x 7½" T • Made in the U.S.A. PART # DESCRIPTION 0801-1444 GT1 w/ HR1 inlay 0801-1445 GT2 w/ HR2 inlay 0801-1446 GT2 w/ HR3 inlay PART # DESCRIPTION 0801-1447 Maverick stitch dull black vinyl 0801-1448 Maverick stitch shiny black vinyl 0801-1449 Pleated dull black vinyl PART # DESCRIPTION 0801-1450 Pleated shiny black vinyl 0801-1451 Smooth dull black vinyl 0801-1452 Smooth shiny black vinyl 0801-1444 0801-1445 0801-1446 0801-1448 0801-1449 0801-1451 FUELPAK FP4 • Made of polycarbonate plastic/Bluetooth® low energy, FP4 hardware smaller and thinner than the previous generation electronics product • Unit’s LEDs have been simplified so the rider knows exactly what is happening between the FP4 and the rider’s motorcycle • Built from the ground up, Android and iPhone® apps feature a new rider interface and are easier to navigate and use than ever before • Live Data in the FP4 app has been upgraded with the whole new look and an additional gauge to track more crucial data while riding • All-new Performance Data feature allows rider to record their ride, look at all available sensors in the created chart • All necessary hardware and instructions included 1020-3513 PART # DESCRIPTION 1020-3513 For 21-22 FLHT/FLHX/FLHR/FLTRX/H-D FL Trike, 21-22 FXBB/S/FXFB/S/FLXR/S/FXST/FLHC/C/FLFB/S/FLSL/FLSB (including CVO models) 1020-3962 For 14-20 FLHT/FLHX/FLTRX/S/FLTRU/FLTRK/FLHT, 15-20 FLRT, 11-20 Softails, 12-17 Dynas (excluding 11-13 CVO Softails) 12-17 Dynas, 14-22 XL models (except 21-22 Sportster S/RH1250S and 22 Nightster/RH975) and 15-20 XG500/750/750A)
APRIL 2023 THE DRAG SPECIALTIES 5 dragspecialties.com FENDER ELIMINATOR KIT • New improved D.O.T. compliant L.E.D. light and housing • New easy to use Heat Shrink Solder Sleeve Butt Connectors • Designed for USA Spec License plates measuring 4" x 7" • 5-3/4" horizontal hole spacing and 2-3/4" vertical hole spacing • Model specific precision laser-cut stainless steel bracket tucks discreetly under the tail section of the motorcycle • Black anodized aluminum license plate frame with silk screened Yoshimura logo included • Stainless steel hardware included • Compatible with aftermarket turn signals when combined with Universal Turn Signal Standard Bracket Kit or Corner Mount Bracket Kit (sold separately) PART # DECRIPTION 2030-2259 Harley Davidson Pan American fender eliminator kit GEN 2 NEIGHBOR HATERS® SERIES MUFFLERS 4” NEIGHBOR HATERS® SERIES MUFFLERS – CHROME FEATURES • The core design produces good power on the stock head pipes, but should be able to create even more when the rider decides to build more power with either a larger engine or standard industry hop-up parts • Provides enhanced sound and improved tunability for performance gains • 50-State legal (declared manufacture replacement part) • Made in the U.S.A. PART # DESCRIPTION 1801-1503 Muffler NH 4" FLH Chrome
APRIL 2023 THE DRAG SPECIALTIES dragspecialties.com 6 OIL COOLER KITS FOR FRAME DOWN TUBE SIDE MOUNT • Sealed waterproof IP68 fans produce 220 CFM of airflow • Oil adapter and thermal switch automatically turn on the dual fans when your oil reaches 210°F • Specially designed aluminum heat exchanger with turbulators for maximum heat dissipation • Plug-and-play wiring harness with relay and waterproof connectors that all connect to the battery under the seat for simple installation • Black nylon-coated stainless-steel-braided oil lines with AN6 fittings • LED indicator light shows when the fans are operating (toggle mount included) • Specially designed oil line fitting wrench • Has the ability to drop your oil temperature up to 50°F • Complete kit; ready to install • Does not require modification of lower fairing • Comes in black finish with no cover • Made in U.S.A. CYLINDER HEAD BREATHERS* • Machined from billet 6061 aluminum with square surfaces, promoting excellent umbrella valve sealing, longer main breather exit nipples with dual O-rings to promote better breather system sealing • Properly sized breather inlets and location for optimum engine breathing • Unique design maximizes breather volume and allows for easy serviceability • Breather bodies have multiple drain ports located on the inside floor, ports are chamfered on ID to allow easy drainage yet squared off on exits to deter filling from splash oil • Anodized Feuling red finish • Include billet breather housings, billet covers, breather filter elements, umbrella valves and quality hardware (rocker cover gaskets are not included and must be purchased separately) • Feuling breathers work, seal and you will find they hold an engine vacuum • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION 0930-0239 For 17-22 M-Eight NOTE: Testing on a healthy engine with no external venting (sealed dipstick and transmission top cover) will see 3-4 oz. of oil in the sump and once dipstick is removed another 3-4 oz will drain OIL PUMP GEAR ALIGNMENT TOOL • Align the oil pump gear flats with the flats of the crankshaft • Feuling recommends assembling the camplate, oil pump, camshaft together on the bench, lining up the oil pump gear flats with crankshaft flats and installing the complete assembly into the camchest as one complete unit • This procedure has proven to provide the best seal on the back scavenge port of the oil pump to engine case as the parts are always going inwards towards the scavenge port • Twin Cam engines: rotate the crankshaft flats so they are horizontal and align oil pump gear flats horizontal to match • M-Eight engines: rotate the crankshaft flats so they are vertical and align oil pump gear flats vertical to match • Made in the U.S.A. PART # DESCRIPTION 3801-0428 For 17-22 M-Eight and 99-17 Twin Cam engines PART # FITS MODEL 0713-0259 For 14-22 Chief/Chieftain, 15-22 Roadmaster and 16-22 Springfield
APRIL 2023 THE DRAG SPECIALTIES 7 dragspecialties.com 800-WATT AMP/FRONT SPEAKER AND 6" X 9" LID KITS • Complete kits with fairing speakers, saddlebag lids with 6" x 9" speakers and 2 amps for 800 watts of total power • Features R.E.M.I.T. circuitry for excellent FM reception from a Class D amp • Dual WBA 400.2r amplifiers easily install inside inner fairing • Pre-tuned to factory radio makes installation very simple • Safe for bike’s charging system • All required hardware and wire is included • Supplied plug-and-play wire harness allows radios fader to work • A radio software reflash required HIGH CALIBER 8" FLEXIBLE ANTENNA • Perfect replacement for stock antenna • Works great with bike covers; fits with or without removable Tour Pak® • Made out of 6061 aluminum with flexible rubber base that prevents bends or breaks • Easy installation; works with AM/FM/WB (no CB) applications PART # COLOR FOR 89-22 FLHT/FLHX/FLTR/FLT, 09-22 FLHTCUTG, 14-22 INDIAN CHIEFTAIN/ROADMASTER/CHALLENGER, 10-17 VICTORY CROSS COUNTRY/CROSS COUNTRY TOUR/MAGNUM MODELS 4401-0270 Chrome 4401-0271 Black 4401-0270 4401-0271 4405-0897 4405-0896 PART # FOR 14-22 FLHT/FLHTCU/FLHTK/FLHX/FLHXS/FLHXST MODELS 4405-0896 PART # FOR 15-22 FLTRX/FLTRU/FLTRK MODELS 4405-0897
APRIL 2023 THE DRAG SPECIALTIES dragspecialties.com 8 DESCRIPTION STERLING CHROMITE 12"-14" APES STERLING CHROMITE 15"-17" APES STERLING CHROMITE 18"-20" APES BLACK PEARL 12"- 14" APES BLACK PEARL 15"- 17" APES BLACK PEARL 18"- 20" APES KARBONFIBR 12"-14" APES KARBONFIBR 15"-17" APES KARBONFIBR 18"-20" APES For 21-22 FLHRXS (w/ Quick Connect Upper Clutch cable and full length brake lines; uses existing lower clutch cable) - - - 0662-1129 0662-1130 - 0662-1131 0662-1132 - For 21-22 FLHR (w/ Quick Connect Upper Clutch cable and full length brake lines; uses existing lower clutch cable) 0662-1142 0662-1143 0662-1144 0662-1145 0662-1146 0662-1147 0662-1148 0662-1149 0662-1150 For 21-22 FLTRK, FLTRX, FLTRXS, FLTRXST (w/ Quick Connect Upper Clutch cable and full length brake lines; uses existing lower clutch cable) 0662-1133 0662-1134 0662-1135 0662-1136 0662-1137 0662-1138 0662-1139 0662-1140 0662-1141 Black Pearl Sterling Chromite Karbonfibr DESIGNER DOT HANDLEBAR INSTALLATION KITS • The only complete kits with matching braided cables and DOT brake lines • Kits include Throttle-By-Wire extensions, clutch cable or hydraulic clutch line, brake lines, copper crush washers, hardware and any necessary switch wiring or turn signal extension • Available with Quick Connect upper clutch cables that reuse the existing lower clutch section • All cables and DOT brake lines feature either Sterling Chromite®, Black Pearl or KarbonFibr braid with highly polished chrome or black chrome-plated fittings • KarbonFibr braid is created from metallic wire with distinct black tone colors, blended and interwoven to mimic the distinct look of carbon fiber • Brake lines are constructed with PTFE inner tubing, DuPont™ Kevlar® aramid fiber, premium Signature Magnum braids and an outer PVC jacket • All cables are a low-effort, high-efficiency design that meets or exceeds all OE specifications for fitment, construction and endurance • Kits for dual disc models include an all brazed manifold that eliminates leaks, alignment problems and unattractive threaded connections • Brake lines are compliant with all DOT FMVSS-106 Specifications • Assembled in the U.S.A. DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company. NOTE: K its are based on using ape hanger style handlebars with 2" risers; except Touring models.
APRIL 2023 THE DRAG SPECIALTIES 9 dragspecialties.com FITS MODEL TOTAL LENGTH TRAVEL BLACK/CHROME PART # ALTERNATIVE LENGTH FOR TOURING MODELS 21-22 FLHT/FLHTK/FLHTKS/FLHX/FLHXS/FLHXST 41" 25/16" 0652-28871 43" 25/16" 0652-28881 45" 25/16" 0652-28891 47" 25/16" 0652-28901 49" 25/16" 0652-28911 1 Bent tube. FITS MODEL TOTAL LENGTH TRAVEL BLACK/BLACK PART # OEM # STOCK LENGTH FOR TOURING MODELS 21-22 FLHT/FLHTK/FLHTKS/FLHX/FLHXS/FLHXST 39" 25/16" 0652-2886 37200441 QUICK CONNECT BRAIDED UPPER CLUTCH CABLES • Quick Connect braided upper clutch cables economically replace the OE upper cable section on select models • Easily and quickly connects to the existing lower cable section • Significantly reduces installation time, plus there's no need to drain transmission fluid • Unique design reuses OE cover and housing parts • Stainless steel, black/chrome or black/black handlebar fittings • Low-effort, high-efficiency cable design meets or exceeds OE specifications for fitment, construction and endurance • Upper cables are made with anti-friction inner liners and are factory lubricated for smooth, consistent, long-lasting operation • Assembled in the U.S.A. 0652-2886 0652-2887 BRAKE/CLUTCH CONTROL KITS • Brake/clutch controls and switch housings with OEM-style clamps sold separately • See page 1261-1262 of the 2023 Drag Specialties FatBook for additional brake/clutch control kits (along with switch housings) PART # DESCRIPTION MATTE BLACK 0610-2185 For 17-20 FLTRX/FLTRU/FLTRK models 0610-2187 For 15-16 FLTRX models PART # DESCRIPTION CHROME 0610-2186 For 15-16 FLTRX models 0610-2186
APRIL 2023 THE DRAG SPECIALTIES dragspecialties.com 10 CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK 0601-5965 0601-5966 12" 301/2" 101/2" 51/2" 0601-5967 0601-5968 14" 301/2" 101/2" 51/2" 0601-5969 0601-5970 16" 301/2" 101/2" 51/2" 11/2" HAMMERHEAD HANDLEBARS • Aggressive new look • Pointed tip for a look that stands out in the crowd • 51/2" of pullback for an aggressive feel • 11/4” diameter clamping area with 3 ½" on-center knurling (requires the use of 1¼" risers and clamp) • Accept OEM heated grips • Made in the U.S.A. 0601-5970 0601-5965 SIZE LOAD/SPEED INDEX TL/TT PART # WF920 FRONT 130/90-16 67H TL IRC-704 100/90-19 57H TL IRC-701 120/80-17 61H TL IRC-703 110/90-19 62H TL IRC-705 WF-920 Wild Flare Front WF-920 WILD FLARE BIAS TOURING/CRUISER TIRES • Fantastic look and performance to match • Reliable tire designed for good looks and function • Also available in heavy-duty version; added reinforcement to the sidewall/tire bead junction helps prevent torsional-flexing under heavy loads and provides extended mileage • Blackwall • Tubeless (TL) • H-rated for speeds up to 130 mph
APRIL 2023 THE DRAG SPECIALTIES 11 dragspecialties.com CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK 0601-5971 0601-5972 12" 301/2" 101/2" 41/2" 0601-5973 0601-5974 14" 301/2" 101/2" 41/2" 0601-5975 0601-5976 16" 301/2" 101/2" 41/2" 11/2" THRESHER HANDLEBARS • Traditional T-Bar look and feel • Aggressive 90° mitered top • 11/4" diameter clamping area with 3½" on-center knurling (requires the use of 1¼" risers and clamp) • 41/2" of pullback for an aggressive feel • Accept OEM heated grips • Made in the U.S.A. 0601-5976 0601-5971 REAR DRIVE BELT • 1” Wide with 139 teeth • Made in the U.S.A. PART # DESCRIPTION 2040-3022 Flexible light strips FLEXIBLE LIGHT STRIPS • Flexible, low-profile auxiliary LED strips designed to mount under the rear fender edge • 78 dual-intensity red LEDs per strip are placed at a 90° angle to shine towards the rear • Each strip is 25” long with 5’ wire leads to route under the seat for connections for low intensity power (run), high intensity power (brake, turn signal or brake/turn) and ground • LED strips can be cut every 6 LEDs or 1.95” to customize length for an exact fit to the rear fender • 0.310" mounting surface; 0.094" thick • Current draw at 12.8V per6 LEDs: 14mA rim, 38mA brake; current draw at 14.4V per 6 LEDs: 16mA run, 48mA brake • Universal design, 3-wire installation • Sold in pairs; come pre-taped for mounting PART # DESCRIPTION 1204-0245 For 09-22 custom Dresser applications, 10-22 FLTRX/FLTRXSE/FLTRXSE2, 09-22 FLHTCUTG/FLHXXX/FLRT and 05-06 FLHTCSE/FLHTCUSE
APRIL 2023 THE DRAG SPECIALTIES dragspecialties.com 12 PART # DESCRIPTION FOR 14-22 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK AND FLHTCUTG/FLRT 1610-0682 Chrome 1610-0683 Black 1610-0684 Gold PART # DESCRIPTION FOR 08-13 FLHR/FLHR/FLHX/FLTR AND H-D FL TRIKE 1610-0679 Chrome 1610-0680 Black 1610-0681 Gold T-REX SHORTY BRAKE ARMS • CNC machined billet aluminum construction • Measure 6.25", compared to OEM length of 8.8" • Allows driver to keep feet in a more aggressive stationary position while braking • Coordinating brake pegs are available separately 1610-0679 1610-0680 1610-0681 T-REX SHORTY SHIFT ARMS • CNC machined billet aluminum construction • Measure 5", 1.25" shorter than stock • Allows driver to keep feet in a more aggressive stationary position while braking • Includes spacer when heel shifter is removed • Coordinating shifter pegs are available separately 1602-1497 1602-1496 1602-1495 INNER SHIFT LINKAGE ARMS • CNC machined billet alumnium construction • Sold each PART # DESCRIPTION 1601-0571 Chrome PART # DESCRIPTION 1601-0572 Black PART # DESCRIPTION 1601-0573 Gold FOR 88-22 FLHT/FLHR/FLHX/FLTR AND H-D FL TRIKE MODELS BRAKE PEGS • CNC machined from billet aluminum • Measure 3" long x 1.5" wide • Includes replacement mounting bolt, 5/16-24 thread • Made to fit directly with Pro-One’s T-Rex shorty brake arms PART # DESCRIPTION 1610-0676 Chrome 1610-0677 Black 1610-0678 Gold SHIFTER PEGS • CNC billet 6061 aluminum • Measure 1.75" long x 1" wide • Includes replacement mounting bolt, 5/16-24 thread, 1" length • Made to fit directly with Pro-One’s Pro Peg series floorboards and footpegs PART # DESCRIPTION 1603-0388 Chrome 1603-0389 Black 1610-0390 Gold 1601-0572 1601-0573 1601-0571 1610-0676 1610-0677 1610-0678 1603-0388 1603-0389 PART # DESCRIPTION 1602-1495 Chrome PART # DESCRIPTION 1602-1496 Black PART # DESCRIPTION 1602-1497 Gold FOR 88-22 FLHT/FLHR/FLHX/FLTR AND H-D FL TRIKE MODELS
APRIL 2023 THE DRAG SPECIALTIES 13 dragspecialties.com RACE WEIGHT MID CONTROLS • Made from 6061-T6 billet aluminum for strength and light weight • Ideal for performance builds and riders that are looking for additional cornering ground clearance • Short-throw shift lever lets you quickly move through the gears • Allows for a more aggressive riding position • Simple bolt-on design requires no modifications • Can be used with Performance Machine® rear brake master cylinder or the stock master cylinder Black Ops Gold Ops 49MM FORK TUBES • Adds color and custom style to front end • Specially coated black (DLC) or gold (titanium nitrate) • Available in stock factory length or +2” extended length • Designed to work with both factory and aftermarket front suspension internals and fork legs • Sold in pairs PART # DESCRIPTION 0404-0657 Gold, 233/4” (stock) 0404-0659 Gold, 253/4" (+2") PART # DESCRIPTION 0404-0658 Black, 233/4” (stock) 0404-0660 Black, 253/4" (+2") 0404-0660 0404-0657 METHOD LEVER SETS • Features a performance inspired design with an ergonomic shape and short length • Each lever is shaped to enhance the feel and comfort of the hand controls • Backside of each lever is cut out for reduced weight, then polished for a sculpted, smooth finish • CNC-machined from forged billet aluminum with a black anodized finish • Sold in sets; both clutch and brake levers are included PART # DESCRIPTION 0610-2224 For 21-22 FLHT/FLHR/FLTRX/FLHX/FLHTCUTG/FLHTCUTGSE/FLRT models w/ cable-operated clutch 0610-2223 For 17-20 FLHT/FLHR/FLTRX/FLHX, 19-20 FLHTCUTG/FLRT models w/ hydraulic clutch 0610-2221 For 08-13 FLHT/FLHR/FLTR/FLHX, H-D FL Trike and 14-16 FLHR w/ cable-operated clutch 0610-2222 For 18-22 Softail w/ cable-operated clutch 0610-2220 For 15-17 Softail (except FLSS/FLSTFBS) w/ cable-operated clutch 0610-2219 For 99-17 Big Twin, 96-03 XL models w/ cable clutch (except 15-17 Softail, 16-17 FXDLS, 08-17 FLHT/FLHR/FLTR/FLHX, H-D FL Trike and 04-17 XL) FOR 18-22 FLDE/FLHC/FLHCS/FLSL/FXBB/FXBBS/FXBR/FXBRS/FXLR 0610-2224 FITS MODEL FINISH FOR 09-13 FLHT/FLHR/FLTR MODELS 1623-0581 Black Ops® 1623-0582 Gold Ops® FITS MODEL FINISH FOR 14-16 FLHT/FLHR/FLTR MODELS 1623-0583 Black Ops® 1623-0584 Gold Ops®
APRIL 2023 THE DRAG SPECIALTIES dragspecialties.com 14 GOLD 43MM INVERTED FORK TUBES • Titanium nitride coating • Designed to fit a wide variety of models • Lengths given for OEM replacements may not be the exact OEM length • 43mm Inverted style fork tubes fit OEM legs and cartridges (includes 2” spacers for plus size tubes) • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION 0404-0666 LH 23", RH 223/4" (stock) PART # DESCRIPTION 0404-0663 LH 25", RH 243/4" (+2") BLACK 43MM INVERTED FORK TUBES • Black Diamond-like carbon coating • Designed to fit a wide variety of models • Lengths given for OEM replacements may not be the exact OEM length • 43mm Inverted style fork tubes fit OEM legs and cartridges (includes 2” spacers for plus size tubes) • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION 0404-0665 LH 23", RH 223/4" (stock) PART # DESCRIPTION 0404-0662 LH 25", RH 243/4" (+2") HARD CHROME 43MM INVERTED FORK TUBES • Finish is electrolyzed for increased hardness of 55-60 Rockwell • Increased hardness for better long-lasting corrosion resistance • Smoother finish creates less drag and seal wear • Not as bright of a finish as chrome, but more durable • Check length before ordering • Lengths given for OEM replacements may not be the exact OEM length • 43mm Inverted style fork tubes fit OEM legs and cartridges (includes 2” spacers for plus size tubes) • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION 0404-0664 LH 23", RH 223/4" (stock) PART # DESCRIPTION 0404-0661 LH 25", RH 243/4" (+2") PUSHROD TOOL • Designed to remove and install the clip on collapsible pushrod tubes • Flat portion of tool fits under the cylinder head while cupped end fits over the bell in the tube and then compresses the spring allowing for easy access to the spring cap retainer • No more cut knuckles and scratched engine parts from using a screwdriver between the fins • New improved design with shoulder bolt pivot for smoothness and durability PART # DESCRIPTION 3801-0426 For Twin Cam, Evolution, Shovelhead, Panhead and XL models FOR 18-20 FXFB, 18-22 FXFBS, 20-22 FXLRS, 22 FXLRST FOR 18-20 FXFB, 18-22 FXFBS, 20-22 FXLRS, 22 FXLRST FOR 18-20 FXFB, 18-22 FXFBS, 20-22 FXLRS, 22 FXLRST
APRIL 2023 THE DRAG SPECIALTIES 15 COASTAL MOTO Give your late-model Touring bike a beautiful upgrade with a set of cast onepiece wheels from Coastal Moto. The wheels are designed to work with OEM or aftermarket brake rotors and the OEM rear cush drive and belt pulley. The wheels are ABS system and TPMS (Tire Pressure Monitoring System) ready, no re-programming required. DESCRIPTION MARLIN MATTE BRONZE LARGO CHROME LARGO BLACK CUT FRONT WHEELS 21" x 3.5" for 08-22 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK, w/ ABS 0201-2433 - - REAR WHEELS 18" x 5.5" for 09-22 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK, w/ ABS 0202-2209 - - 18" x 7" for 09-22 FLHTCUTG, 20-22 FLHTCUTGSE and 15-22 FLRT w/ ABS - 0202-2210 0202-2211 PRECISION CAST 3D WHEELS • "Cast" one-piece design wheels at a fraction of the cost of billet or forged wheels • Includes bearings and valve stems installed by Coastal Moto • Wheels are designed to accept lug-mounted OEM or aftermarket 14-22 FL Touring-style front rotors (sold separately) • Rear wheel hub accepts stock cush-drive, pulley and brake rotor • Available for ABS models • ABS style features intelligent ABS bearings that are "linked brake ready"; no ABS system reprogramming required • Accept the H-D TPMS (Tire Pressure Monitoring System) PART # FINISH DESCRIPTION 0201-2434 Black anodized 21" x 3.5" for 08-19 FLHT/FLHR/FLHX/FLTRX models w/o ABS 0201-2435 Raw machined 21" x 3.5" for 08-19 FLHT/FLHR/FLHX/FLTRX models w/o ABS 0201-2436 Black anodized 21" x 3.5" for 08-21 FLHR/FLHRXS/FLHT/FLHTK/FLHX/FLHXS/FLHXSE/FLHXST/FLTRK/FLTRKSE/FLTRU/FLTRX/FLTRXS/FLTRXSE/FLTRXST w/ ABS 0201-2437 Raw machined 21" x 3.5" for 08-21 FLHR/FLHRXS/FLHT/FLHTK/FLHX/FLHXS/FLHXSE/FLHXST/FLTRK/FLTRKSE/FLTRU/FLTRX/FLTRXS/FLTRXSE/FLTRXST w/ ABS PERFORMANCE FRONT WHEELS • CNC-machined from forged aluminum • Designed for brake rotors with 3.25”x 5 bolt pattern • Dual-disc ABS and non-ABS versions • Available in Black Ano and Raw Machined finishes • Made in the U.S.A. Black anodized Raw machined Largo chrome Largo black cut Marlin matte bronze
RkJQdWJsaXNoZXIy NDI5NTY=