PART # DESCRIPTION 1800-2622 For 91-17 Dyna w/ mid controls, 07-17 Dyna w/ forward controls MID-LENGTH SUPER BIKE 2-INTO-1 EXHAUST SYSTEM • Hand TIG-welded stainless steel construction • 13/4 “ headpipes step up to 17/8” into the collector to increase flow and improve performance • 4” diameter straight can 11” muffler body includes matching aluminum end cap • Removable spiral-core perforated baffle features an all-new aggressive sound • 18mm and 12mm O2 ports with adapters and plugs • Full coverage stainless heat shields for the front and rear header pipes included • Made in the U.S.A. PART # DESCRIPTION 1800-2623 For 06-17 Dyna w/ mid controls PART # DESCRIPTION 1800-2624 For 91-05 Dyna w/ mid controls RIPPER SUPER BIKE 2-INTO-1 EXHAUST SYSTEMS • Stepped headers – 13/4” to 17/8” designed for maximum performance and more ground clearance • Utilizes an advanced inner collector for maximum performance • Upswept Super Bike 4” stainless muffler body with aluminum end cap and a new removable conical performance baffle delivers an all new aggressive exhaust sound • Stainless steel construction • Hand TIG welded • Includes 18mm O2 bungs for tuning, 12mm adapters and plugs • Full coverage stainless heat shields for the front and rear header pipes included 1800-2624 1800-2623 THE DRAG SPECIALTIES JUNE 2023 dragspecialties.com
JUNE 2023 THE DRAG SPECIALTIES dragspecialties.com 2 PART # DESCRIPTION 1801-1532 For 14-22 XL models (except 21-22 Sportster S/RH1250S and 22 Nightster/RH975) 3” ROUND TWIN SLASH SLIP-ON MUFFLERS • PCX™ (Power Chamber Exhaust) Technology • Chambered high-flow catalyst cartridge designed to increase torque • Full coverage heat shields • Available in a black finish • Mounting and hardware instructions included • Sold in pairs • Made in the U.S.A. • See the 2023 Drag Specialties FatBook for additional Vance & Hines 3” Round Twin Slash slip-on mufflers for XL PART # DESCRIPTION FOR 18-23 FLDE/FLHC/FLHCS 1801-1522 Chrome FOR 18-23 FLFB/FXBB/FXLR/FXBR/FLSL/FXST 1801-1534 Black FOR 07-17 FLSTF, 07 FXSTD (EXCEPT FLSTFBS) 1801-1523 Chrome PART # DESCRIPTION FOR 07-17 FLSTF, 07 FXSTD (EXCEPT FLSTFBS) (CONT) 1801-1529 Black FOR 07-17 FLSTN, 08-11 FLSTSB, 12-17 FLS (EXCEPT 14-15 FLSTNSE) 1801-1524 Chrome 1801-1530 Black 3” ROUND TWIN SLASH SLIP-ON MUFFLERS • PCX™ (Power Chamber Exhaust) Technology • Chambered high-flow catalyst cartridge designed to increase torque • Full coverage heat shields • Mounting and hardware instructions included • Sold in pairs • Made in the U.S.A. • See the 2023 Drag Specialties FatBook for additional Vance & Hines 3” Round Twin Slash slip-on mufflers for Softail 1801-1524 1801-1522 1801-1534 1801-1529
JUNE 2023 THE DRAG SPECIALTIES 3 dragspecialties.com PART # DESCRIPTION FOR 15-22 SCOUT/SCOUT SIXTY, 18-22 SCOUT BOBBER 1801-1528 Chrome PART # DESCRIPTION FOR 15-22 SCOUT/SCOUT SIXTY, 18-22 SCOUT BOBBER (CONT) 1801-1533 Black TWIN SLASH 3” SLIP-ON MUFFLERS • PCX™ (Power Chamber Exhaust) technology • Chambered high-flow catalyst cartridge designed to increase torque • Full coverage heat shields • Sold in pairs • Made in the U.S.A. • See the 2023 Drag Specialties/Parts Canada Indian catalogue for additional Vance & Hines Twin Slash 3” slip-on mufflers PART # DESCRIPTION 1020-4028 For all 07-13 FLHT/FLHX/FLHR/FLTRX/H-D FL Trike (except 07-08 CVO models), 07-10 FXST/FLST, 07-11 FLD/FXD/FXDWG, 08-11 FXCW/C, 07-13 XL/XR models FP4 • Made of polycarbonate plastic/Bluetooth® low energy, FP4 hardware is smaller and thinner than the previous generation electronics product • Unit’s LEDs have been simplified so the rider knows exactly what is happening between the FP4 and the rider’s motorcycle • Built from the ground up, Android and iPhone® apps feature a new rider interface and are easier to navigate and use than ever before • Live Data in the FP4 app has been upgraded with a whole new look and an additional gauge to track more crucial data while riding • All necessary hardware and Instructions included • Made in the U.S.A. • See the 2023 Drag Specialties FatBook for the additional Vance & Hines FP4 1801-1533 1801-1528
JUNE 2023 THE DRAG SPECIALTIES dragspecialties.com 4 PART # DESCRIPTION FOR 22-23 FXLRST 2310-0762 Clear (+2”) 2310-0763 Clear (+4”) 2310-0764 Clear (+6”) PART # DESCRIPTION FOR 22-23 FXLRST (CONT) 2310-0765 Med. smoke (+2”) 2310-0766 Med. smoke (+4”) 2310-0767 Med. smoke (+6”) PART # DESCRIPTION FOR 22-23 FXLRST (CONT) 2310-0768 Dark smoke (+2”) 2310-0769 Dark smoke (+4”) S230/231 WINDSHIELDS • Direct replacement for the Low Rider ST fairing windshields • Made from .118” aircraft-quality acrylic • Available in clear, medium smoke or dark smoke tints in heights listed • Install using existing factory hardware • Made in the U.S.A. PART # DESCRIPTION FOR 14-22 FLHT/FLHTK/FLHTCU/FLHX AND FLHTCUTG MODELS 2040-2999 Chrome 2040-3000 Black PART # DESCRIPTION FOR 15-22 FLTRX/FLTRK/FLTRU MODELS 2040-2997 Chrome 2040-2998 Black TRACER WINDSHIELD TRIM LED LIGHTS • Durable injection-molded ABS construction with smoked polycarbonate lenses • Features stylish diffused (solid) lighting effect with high-intensity output 2040-2998 2040-2999 2310-0769 2310-0766 2310-0762
JUNE 2023 THE DRAG SPECIALTIES 5 dragspecialties.com PART # DESCRIPTION 3515-0230 For 87-22 FLT/FLHT/FLHX/FLHR/FLTR equipped w/ a Tour Pak and an Air Wing luggage rack; OEM #53000063/79179-08 3515-0231 For 80-22 FLT/FLHT/FLHX/ FLHR/FLTR equipped w/ a Tour Pak and an Original luggage rack; OEM #53665-87/53000063 3515-0232 For 99-22 FLHR/FLHX/FLTR equipped w/ a King HD Detachables® Two-Up luggage rack; OEM #50300058A/50300054A RICKRAK® ROLLER BAG COMBO KITS • Rigid construction to hold its shape even when empty • Fully expandable section in lid when more space is needed • Reversed coil zippers to help keep out dust and dirt • Lockable main compartment • Outer pockets to access smaller items • Mesh pocket compartment under lid • Integrated carry handle located inside back pocket • Shoulder strap included PART # DESCRIPTION 1510-1079 For 14-19 Indian models w/ Tour Pak and luggage rack OEM #2880044-156 RICKRAK® TOUR PAK LUGGAGE MOUNT • Quickly and securely attaches your tour bag to the luggage rack on your tour pack • No straps required • Protected contact areas won’t harm surfaces • Hardware included for attaching your tour bag or other items to the RickRak® • Durable black powdercoated surfaces • Made in the U.S.A. • Extra thick 100% waterproof rain cover included • Regular dimensions: 22” L x 12” W x 14.5” H and the volume is 63 liters • Expanded dimensions: 22” L x 12” W x 17” H and the volume is 73.5 liters • Kit includes luggage rack mount, Top Dekk II Premium roller bag, rain cover and RickRak® lock • Made in the U.S.A. 3515-0232 3515-0230 PART # DESCRIPTION 0504-0393 For 09-13 FLHT/FLHR CUSTOM FILLER PANEL BRACKETS • Fills the space between the saddlebags and the fender • Allows the installation of Ciro or Custom Dynamics Filler Panel lights (not included) • Made in the U.S.A.
JUNE 2023 THE DRAG SPECIALTIES dragspecialties.com 6 FRONT BRAKE PADS PART # DESCRIPTION 1721-3373 For 20-23 Challenger/Dark Horse/Limited, 23 Challenger Elite (Brembo calipers, Cast wheels) 1721-3373 For 22-23 Pursuit Limited (Brembo calipers, Cast wheels) 1721-3373 For 20-23 FTR 1200 Rally, 19-23 FTR 1200 S, 18-23 FTR 1200, 21-22 FTR 1200 R Carbon, 19-20 FTR 1200 S Race Replica REAR BRAKE PADS PART # DESCRIPTION 1721-3372 For 17-23 Scout/Scout Sixty 1721-3372 For 22-23 Scout Rogue, 23 Rogue Sixty 1721-3372 For 21-23 Scout Bobber Sixty, 19-23 Scout Bobber/Bobber Twenty SINTERED METAL BRAKE PADS • Sintered metal brake pads are the OEM-type replacement pads for most bikes from the late 1970s to the present • Sintered metal brake pads are proudly made in the U.S.A.; second-to-none in their stopping abilities and wear characteristics, while still providing excellent reduction in noise and dust • Drag Specialties brake pads are asbestos-, nickel- and lead-free NOTE: If you are using aftermarket billet steel rotors, it is recommended you use our Organic pads with aramid high-performance fiber brake pads to avoid damage to them. Sintered pads are not recommended for billet steel rotors as the pad material is too aggressive for those rotors. PART # DESCRIPTION 2212-0872 For 99-16 FLHT/FLHR/FLHX/FLTR/FLTRX; repl. OEM #74438-99A OIL PRESSURE SENSOR • Accurate reproduction of the OEM sending unit • Precision calibrated • Sold each 1721-3372 1721-3373
JUNE 2023 THE DRAG SPECIALTIES 7 dragspecialties.com PART # DESCRIPTION 0802-1490 Smooth 0802-1491 Double diamond, black thread PART # DESCRIPTION 0802-1492 Double diamond, red thread 0802-1493 Double diamond, silver thread PREDATOR III SEATS • Features a 7” tall driver support with unique styling • High-quality automotive-grade vinyl cover • Molded polyurethane foam for maximum comfort and styling • Seat is made narrow up front for better leg clearance FOR 18-23 FLSB, FXLR/FXLRS/FXLRST; 281/4” L OVERALL (121/2” W FRONT) X (61/4” W REAR) • 3/16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Fits with all Drag and most H-D sissy bars • Includes all mounting hardware • Made in the U.S.A. 0802-1493 0802-1492 0802-1491 0802-1490
JUNE 2023 THE DRAG SPECIALTIES dragspecialties.com 8 PART # DESCRIPTION 0801-1407 For 97-07 FLT/FLHT/FLTR (except FLHX/FLHR) ROAD SOFA™ PILLOW TOP SEAT • Refined split-cushion design separates the seating surface from the lumbar support to reduce tailbone/back pressure for maximum long-range comfort • Features a combination of progressive density foam and GelCore™ inserts for superior driver and passenger comfort • Pillowed soft upholstery cover backed by a compliant foam layer under the cover to provide incredible comfort and style • Classically styled button-tufted cover • Available with driver’s backrest • Made in the U.S.A. PART # DESCRIPTION 0822-0506 For 14-22 Chief/Chieftain/Roadmaster/ Springfield PASSENGER BACKREST/TRUNK PAD • Fits Saddlemen Road Sofa™ heated and unheated seats • Made in the U.S.A. PART # DESCRIPTION 0801-1330 For 08-22 FLHR/FLHT/FLHX/FLTR/ FLTRU/FLTRK/FLTRX w/ Dominator solo seat DOMINATOR EXTENDED REACH PILLION PAD • Hybrid design combines GelCore™ interior, progressive-density foam and a Gel Channel™ cover to provide Harley-Davidson® riders with unparalleled comfort, control and a modern style • Smooth vinyl cover holds up to hard use and still retains its good looks • Cover is constructed with durable SaddleHyde™ that resists water and cold-cracking • Fuller than conventional pillion pads for longer rides in great comfort • Designed for use with Dominator Solo seat, PART #0801-1292 (sold separately) • Made in the U.S.A. PART # DESCRIPTION FOR HOG KILLERS SEATS 0822-0423 Gravestone (6.5” x 11”) FOR ROAD SOFA SEATS 0822-05011 Gravestone (6.5” x 6.5”) PART # DESCRIPTION FOR ROAD SOFA SEATS (CONT) 0822-0503 Half-moon (10” x 8”) FOR ROAD SOFA CF SEATS 0822-05021 Gravestone (6.5” x 6.5”) 1 Fits 99-22 Touring and 18-22 Softail models w/ tall sissy bar and OEM supplied triangle bracket. SISSY BAR PADS • Perfect match for a variety of Saddlemen seats • Mounts to Harley-Davidson® accessory sissy bars and most popular aftermarket brands with 5” width • Pad can be mounted using OEM/aftermarket bolt pattern or can mount using chrome brackets, which are included • Made in the U.S.A. 0822-0423 0822-0501 0822-0502 0822-0503
JUNE 2023 THE DRAG SPECIALTIES 9 dragspecialties.com PART # DESCRIPTION FOR 16-22 DRESSERS, 16-22 H-D FL TRIKE, AND 15 FLHTCUL/FLHTKL 1107-0703 Diamondback, black 1107-0704 Diamondback, chrome FOR 18 FLSB, 19-22 SOFTAIL AND 18 SOFTAIL W/ NARROW PRIMARY COVER 1107-0697 Dimpled, black 1107-0698 Dimpled, chrome 1107-0699 Diamondback, black PART # DESCRIPTION FOR 18 FLSB, 19-22 SOFTAIL AND 18 SOFTAIL W/ NARROW PRIMARY COVER (CONT) 1107-0700 Diamondback, chrome FOR 99-18 BIG TWIN (EXCEPT 18 FLSB, 16-18 DRESSERS, 15 FLHTCUL/FLHTKL) 1107-0701 Diamondback, black 1107-0702 Diamondback, chrome DERBY COVERS • CNC-machined from billet aluminum • 5-bolt pattern • Includes mounting hardware • Made in the U.S.A. NOTE: 06 Dyna Glide and all 07-18 applications (except 18 FLSB, 16-18 Dressers, 15 FLHTCUL/FLHTKL) will require the use of gasket PART #s 0934-0289 or 0934-0788. 1107-0698 1107-0700 1107-0701 1107-0704 PART # DESCRIPTION 1003-2029 For all 86-06 CV and butterfly-style Keihin carbs DIAPHRAGM REBUILD KIT • Rebuild kit for the diaphragm • Includes diaphragm, spring and O-ring
JUNE 2023 THE DRAG SPECIALTIES dragspecialties.com 10 PART # DESCRIPTION 1301-0140 For 17-22 FLHR, FLHT, FLHTCU, FLHX, FLTRX, FLTRU 1301-0139 For 14-16 FLHR, FLHT, FLHTCU, FLHX, FLTRX, FLTRU 1301-0138 For 09-13 FLHR, FLHT, FLHTCU, FLHX, FLTR 1301-0137 For 07-08 FLHR, FLHT, FLHTCU, FLHX, FLTR 1301-0136 For 04-06 FLHR, FLHT, FLHTCU, FLHX, FLTR 1301-0135 For 02-03 FLHR, FLHT, FLHTCU, FLTR 1301-0134 For 99-01 FLHR, FLHT, FLHTCU, FLTR GLADIATOR TRIKE CONVERSION KITS • Complete bolt-on application, no welding or fabrication required • Independent rear suspension features automotive bushings that insulate the chassis from driveline and suspension vibrations • Air ride suspension with on-board compressor • LED air suspension and voltmeter readout gauges • Progressive coil-over shocks with 4” plus wheel travel • 12” disc brakes with multi-piston calipers • Retains and utilizes the stock belt and drive pulley • 15” polished aluminum torque thrust wheels with tires • Polyester resin fiberglass body • Tombstone taillights • Works with or without tour pack • Designed for stock exhaust but fits with most aftermarket exhaust systems with minimal modifications • Includes installation instructions NOTE: Will NOT work with quick-release tour pack mount. NOTE: All 14-22 models will require the BCM program parameter to be changed to “trike mode”. NOTE: Part Numbers listed are for basic kits. Additional components as well as accessories and paint are not included. Contact Motor Trike for more details. 1301-0134 Shown with optional accessories
JUNE 2023 THE DRAG SPECIALTIES 11 dragspecialties.com PART # DESCRIPTION 0931-1112 For 17-22 114”/117” M-Eight 132" BIG BORE KIT FOR M-EIGHT 114"/117" ENGINES • Bolt-on kit, the largest cylinder bore possible without requiring machining of the crankcases • 4.320” bore and 4.5” stroke • 11:1 forged pistons • Black granite finish cylinders with highlighted fins • All necessary gaskets and hardware required for installation included • Includes cam cover badge • Made in the U.S.A. PART # DESCRIPTION FOR 06 TWIN CAM 1001-0091 Super E carburetor and Stealth air cleaner kit w/ chrome teardrop air cleaner cover 1001-0092 Super G carburetor and Slasher Stealth air cleaner kit w/ chrome slasher teardrop air cleaner cover FOR 99-05 TWIN CAM 1001-0089 W/ Super E carburetor and Stealth air cleaner cover and chrome teardrop air cleaner cover 1001-0090 W/ Super G carburetor and Slasher Stealth air cleaner kit w/ chrome slasher teardrop air cleaner cover FOR 84-99 EVOLUTION BIG TWIN 1001-0085 W/ Super E carburetor and Stealth air cleaner kit w/ chrome teardrop air cleaner cover 1001-0086 W/ Super E carburetor and Stealth air cleaner kit w/ gloss black teardrop air cleaner cover 1001-0087 W/ Super G carburetor and Slasher Stealth air cleaner kit w/ chrome slasher teardrop air cleaner cover 1001-0088 W/ Super G carburetor and Slasher Stealth air cleaner kit w/ gloss black slasher teardrop air cleaner cover SUPER E OR G CARBURETOR/ STEALTH AIR CLEANER KITS • Combines a Super E or G carburetor with the S&S Stealth air cleaner • Increases fuel and airflow for added performance • Variable position enrichment starting system • O-ring sealed idle mixture screw • Washable, reusable air filter element • Teardrop style air cleaner cover • Adjustable accelerator pump for quick throttle response and easy starting • Uses the factory dual-cable throttle system for smooth, reliable operation • Easy to install and tune • Made in the U.S.A. 1001-0092 1001-0088
JUNE 2023 THE DRAG SPECIALTIES dragspecialties.com 12 LOS ANGELES CHOPPERS Located in Huntington Beach, California, Los Angeles Choppers has been a leading manufacturer of metal fabricated goods for more than 25 years. Specializing in the design, tooling, and manufacturing of handlebars, machined aluminum risers, exhaust systems, and much more, they have had a long partnership with Drag Specialties in manufacturing some of the coolest handlebar designs available for your American V-Twin. PART # DESCRIPTION FOR 99-22 FLT/FLHT/FLHR/FLTR/FLHX (EXCEPT H-D FL TRIKE) 1601-0565 Black 1601-0566 Chrome PART # DESCRIPTION FOR 99-17 DYNA W/ MID CONTROLS 1601-0567 Raw 1601-0568 Black 1601-0569 Chrome BILLET COUNTY SHIFT LINKAGE • Machined billet aluminum construction • 5/16-24” Adjustable Heim rod ends • Touring linkage adjust from 11.5” to 12.5” • Dyna linkage adjusts from 3.625” to 4.625” • Made in the U.S.A. 1601-0565 1601-0566 1601-0567 CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 15-23 FLTRX/ST, FLTRU/FLTRK MODELS 0601-6216 0601-6217 8” 331/2” 9.4” 6” 0601-6218 0601-6219 10” 337/8” 9.4” 6” 0601-6220 0601-6221 12” 341/8” 9.4” 6” 0601-6222 0601-6223 14” 345/8” 9.4” 6” 0601-6224 0601-6225 16” 351/8” 9.4” 6” FOR 96-23 FLHT, FLHX, FLHTCUTG/FLHXXX MODELS 0601-6228 0601-6229 10” 371/3” 12” 5” 0601-6230 0601-6231 12” 371/3” 12” 5” 0601-6232 0601-6233 14” 371/3” 12” 5” 0601-6234 0601-6235 16” 371/3” 12” 5” 11/4” TWIN ROUND HANDLEBARS • Classic ape hangers with the same dimensions as the popular Twin Peaks handlebars • Available in heights from 8” up to 16” • Notched for TBW applications • Accepts H-D OEM heated grips • Available in chrome and gloss black finishes • Made in the U.S.A. 0601-6216 0601-6235
JUNE 2023 THE DRAG SPECIALTIES 13 dragspecialties.com CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 21-22 FLHT, FLHTC, FLHTCU, FLHTK, FLHX AND H-D FL TRIKE (1” DIA. CLAMPING AREA) 0601-6041 0601-6042 12” 36” 151/2” 9” 0601-6043 0601-6044 14” 36” 151/2” 9” 0601-6045 0601-6046 16’ 36” 151/2” 9” FOR 16-20 FLHT, FLHTC, FLHTCU, FLHTK, FLHX AND H-D FL TRIKE (1” DIA. CLAMPING AREA) 0601-6035 0601-6036 12” 36” 151/2” 9” 0601-6037 0601-6038 14” 36” 151/2” 9” 0601-6039 0601-6040 16’ 36” 151/2” 9” FOR 14-15 FLHT, FLHTC, FLHTCU, FLHTK, FLHX AND H-D FL TRIKE (1” DIA. CLAMPING AREA) 0601-6029 0601-6030 12” 36” 151/2” 9” 0601-6031 0601-6032 14” 36” 151/2” 9” 0601-6033 0601-6034 16’ 36” 151/2” 9” PLUG-AND-PLAY EZ INSTALL 11/4” ROUND TOP HANDLEBAR KITS • Plug-and-play EZ Install handlebar kits include everything needed to install our handlebars in half of the time of other kits - just remove the handlebars from the box and plug them into your motorcycle • Handlebars now come pre-wired for your handlebar controls; now include a Genuine Harley-Davidson throttle-by-wire sensor installed • Our top corner feature is a non-welded corner we machine from a billet steel with a smooth internal wire cavity that won’t damage the internal wiring • CNC mandrel bent from 11/4” diameter x .120” wall heavy tube • Bolt-together, two-piece handlebar that takes up half the shelf space and is easy to ship • Designed to work with ABS and non-ABS models FAT BAGGERS, INC. The new plug-and-play handlebar kits from Fat Baggers are pre-wired for your controls, and now include a genuine Harley-Davidson throttle-by-wire sensor installed to make installation even easier! Everything is included for a fast, easy handlebar swap. Plus, you get the great style, fit and finish that will add a true custom look to your ride. 0601-6030 0601-6037 • Available in chrome or gloss black powdercoated finishes • Gloss black bars come with black lines/cables extensions, chrome bars come with braided lines/cables extensions (unless noted) • Made in the U.S.A. NOTE: All 2021-2022 kits will include black brake lines and black clutch extensions. NOTE: Our handlebar kits do not replace existing lines and cables. We extended them. NOTE: Accepts OEM heated grips. NOTE: Heated grip wire extensions sold separately. NOTE: U.S. Patent No. 10,946,926.
JUNE 2023 THE DRAG SPECIALTIES dragspecialties.com 14 FITS MODEL OEM # STOCK +2” +4” +6” +8” +10” For 20-22 Chief/Chieftain/Springfield/Roadmaster/Vintage 1913689 1741-6176 1741-6177 1741-6178 - - - For 15-19 Chief/Chieftain/Springfield/Roadmaster/Vintage 1912040/1912487 1741-6174 1741-6175 1741-6176 1741-6177 1741-6178 - For 20-22 Challenger 1913248/1913851 1741-6179 1741-6180 1741-6181 1741-6182 1741-6183 - For 18-22 Scout/Scout Sixty/Scout Bobber Twenty 1913334 1741-6169 1741-6170 1741-6171 1741-6172 1741-6173 - For 18-22 Scout Bobber 1913335 1741-6168 1741-6169 1741-6170 1741-6171 1741-6172 1741-6173 XR STAINLESS DOT ABS UPPER BRAKE LINE KITS • XR Stainless DOT brake lines offer a great fit and excellent quality at an economical price • Manufactured with an enhanced construction for great braking response and durability • Clear-coated stainless steel with chrome fittings • Available in stock and plus lengths to fit most ABS Indian models • E-Z Align rotating line fittings for perfect no-kink fitments • Fittings are highly polished and chrome-plated Tough abrasion resistant nylon Heavy gauge stainless braid PTFE inner tubing 1741-6174 1741-6168 1741-6179 • Inner PTFE tubing braided with XR Stainless Steel reinforcement embedded in a tough nylon outer jacket offers exceptional protection for paint or chrome • Brazed construction eliminates leaks and alignment problems • Compliant with all DOT FMVSS-106 Specifications • Assembled in the U.S.A. NOTE: ABS Upper kits contain a brake line assembly to connect the ABS controller or lower brake line assembly to the master cylinder. A lower brake line assembly is not required.
JUNE 2023 THE DRAG SPECIALTIES 15 dragspecialties.com PART # DESCRIPTION 2040-3027 Black PART # DESCRIPTION 2040-3028 Chrome DYNAMIC LED FAIRING VENT INSERTS • Replaces OEM fairing vent with built-in white running light and auxiliary amber turn signals • Dual-color amber/w hite LEDs • Decorative stainless mesh • Includes plug-and-play connectors for simple installation behind fairing • Mounts using factory hardware • Does not block airflow from OEM vent FOR 19-23 CHIEFTAIN/CHIEFTAIN LIMITED/CHIEFTAIN DARK HORSE/CHIEFTAIN ELITE/ROADMASTER DARK HORSE, 21-23 ROADMASTER LIMITED; REPL. OEM #5454864 2040-3028 2040-3027 PART # DESCRIPTION 2040-3023 Black PART # DESCRIPTION 2040-3024 Chrome FRONT BRAKE CALIPER MOUNTS FOR PROBEAM® FOG LIGHTS • Billet aluminum construction • Brackets attach to front brake caliper mounts • Fully adjustable design with 10mm x 1.5 lamp mount stud • Compatible with ProBEAM® fog lamps (sold separately) • Mounting hardware included • Sold in pairs FOR 00-23 FLHT/FLHR/FLTR/FLHX, 09-23 H-D FL TRIKES W/ DUAL FRONT BRAKE CALIPERS 2040-3023 2040-3024 PART # DESCRIPTION 2120-1215 For 84-17 FXST/FLST, 92-17 FXD and 86-22 XL models WIRE HARNESS • Connects to battery power • On/off switch • Short circuit protection • Thermal overload protection • No fuse required • No current draw from run/aux circuits • Plug-and-play installation • Sold each Note: Used for installation of PART #2001-2442 (sold separately). PART # DESCRIPTION 2040-3025 Chrome PART # DESCRIPTION 2040-3026 Black anodized OVAL LED BAG LIGHTS • Housings are machined from 6061-T6 billet aluminum • Three-wire LED unit on each light includes 10 LEDs and measures 71/4” L x 11/16” W; can be wired as run/turn/brake lights • Approximately 3/4” of clearance is required behind the surface these are installed into • Sold in pairs • Made in the U.S.A. NOTE: May require load equalizer or turn signal controller depending upon application. 2040-3025 2040-3026
JUNE 2023 THE DRAG SPECIALTIES 16 PART # DESCRIPTION 1304-1091 For 20-22 Challenger, Challenger Limited and Challenger Dark Horse, 22 Pursuit and Pursuit Dark Horse TOMAHAWK TRIKE CONVERSION KIT • Complete bolt-on application, no welding or fabrication required • Independent rear suspension features automotive bushings that insulate the chassis from driveline and suspension vibrations • Air ride suspension with on-board compressor • LED air suspension and voltmeter readout gauges • Progressive coil-over shocks with 4” plus wheel travel • 12” rotors and multi-piston disc brakes • Retains and utilizes the stock belt and drive pulley • 15” polished aluminum torque thrust wheels with tires • Polyester resin fiberglass body • Works with the stock taillights • Designed for stock exhaust only • Includes installation instructions NOTE: All Motor Trike conversions can be configured to work with stock tour trunks, backrests, or without either as applicable by model. NOTE: PART # listed is for basic kits. Additional components as well as accessories and paint are not included. Contact Motor Trike for more details. PART # DESCRIPTION 1401-0962 For 14-20 FLHT/FLHR/FLHX/FLTR models w/ 18” or 19” front tires 1401-0963 For 94-13 FLT/FLHT/FLHX/FLHR/FLTR models w/ 18” or 19” front tires RETRO FRONT FENDER • Easy way to give a bike a retro look • 14-gauge stamped steel construction • 6” wide at the bolting surface • Made in the U.S.A. 1401-0963 1401-0962
RkJQdWJsaXNoZXIy NDI5NTY=