AUGUST 2023 THE DRAG SPECIALTIES dragspecialties.com 10 PART # DESCRIPTION 0930-0240 For all 17-23 M-Eight ROCKER SHAFT SHIMS • Quiet your engine by tightening the rocker arm to cylinder head end play clearance • Feuling recommends an ideal side clearance of 0.0035” - 0.005” for optimum rocker arm oil psi and noise reduction • M-Eight cylinder heads also have excessive wear on the rocker arm standoff thrusting surfaces; when the hardened shim is placed on the thrusting side it will assist in reduction of further wear and damage to cylinder head • Includes six 0.003” thick shims, six 0.005” thick shims and six 0.0010” thick shims • Made in the U.S.A. NOTE: These shims should be installed by a professional; one who can make correct end play measurements and can install and tighten rocker shaft nuts/ bolts without damaging shims. PART # DESCRIPTION FOR 91-03 XL 2401-1615 External engine fastener kit (includes right side engine cover, center engine/choke cable mount, lifter blocks, rocker covers, front engine upper mount nut, front engine upper mount nut, case bolts, timing cover, 1/4” washers, 3/8” HD washers, 5/16” washers and 3/8” lock washers) 2401-1616 External primary fastener kit (includes primary cover, clutch cover and 1/4” stainless steel washers) 12-POINT ENGINE FASTENER KITS • Top engine builders demand quality fasteners! Secure your engine with complete confidence • Quality 12-point heat-treated stainless steel • Feature precision-rolled threads for optimum engagement, to prevent galling and promote more consistent torque loading • Wide underhead flange design provides even load distribution for optimum sealing of surfaces, preventing leaks • Tensile strength rated @ 170,000 psi; superior and stronger than OEM and stronger than grade 8 fasteners • Manufactured by ARP® to Feuling’s® exact specifications • All kits include moly assembly lubricant for installation • Made in the U.S.A. • See the 2023 Drag Specialties FatBook for the entire line of Feuling Engine Fastener kits PART # DESCRIPTION 2401-1617 For 91-03 XL DRESS UP CHASSIS/TRIM FASTENER KIT • Top engine builders demand quality fasteners! Secure your engine with complete confidence • Quality 12-point hardened stainless steel bolts with a polished “SHOW” corrosion-resistant finish • Feature precision-rolled threads for optimum engagement, to prevent galling and promote more consistent torque loading • Wide underhead flange design provides even load distribution for optimum sealing of surfaces – preventing leaks • Eliminates thread problems associated with chromed hardware • Tensile strength rated @ 170,000 psi; superior and stronger than OEM and stronger than grade 8 fasteners • Manufactured by ARP® to Feuling’s® exact specifications • Kit includes front caliper mount, fork clamps, rear fender struts, rear brake rotor, rear brake master cylinder, rear belt guard, voltage regulator mount, axle nut, 1/4” washers, 5/16” washers, 3/8” washers, 1/2” washers and moly assembly lubricant for installation • Made in the U.S.A. 2401-1616 2401-1615 PART # DESCRIPTION 0925-1509 465B PART # DESCRIPTION 0925-1510 485 GRIND OPEN CLOSE DURATION @ .050” VALVE LIFT LIFT TDC LOBE CENTERLINE 465B Intake 10° 20° 210° 0,464” 0,126” 95° Exhaust 46° 10° 236° 0,460” 0,122” 108° 485 Intake 7,5° 29,5° 217° 0,485” 0,116” 101° Exhaust 52,5° 14,5° 247° 0,485” 0,145” 109° CAMS FOR 17-23 M-EIGHT 465B • Bolt-in chain drive cam for 107”-117” engines • Use with stock valve springs • For heavy and middle weight bikes • Great low to mid rpm torque (1200-5600 rpm) 485 • Highest lift bolt-in chain drive cam available for use with stock valve springs • Bolt-in cam for 107” engines and larger • Excellent low to mid rpm power (1500-5600+ rpm) 0925-1509
RkJQdWJsaXNoZXIy NDI5NTY=