SNOW BIKE KIT 1) Super Straight Six Combo Lightbar. 2) Wiring Harness with Waterproof Rocker Switch. 3) Mount & Hardware. PART # DESCRIPTION 2001-2488 Snow Bike Kit 70 THE DRAG SPECIALTIES JANUARY 2024 dragspecialties.com
JANUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 2 PART # DESCRIPTION FOR 17-23 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK MODELS 1800-2627 Black chrome B4 2-INTO-1 EXHAUST SYSTEM* • Features equal-length headers • Stepped 1 3/4” to 1 7/8” headpipes with heat shields • Utilizes an advanced inner collector for maximum performance • 4” straight can muffler with matching billet end cap • Made in the U.S.A. PART # DESCRIPTION FOR 17-23 FLHT/FLHR/FLHX/FLHFB/FLTRX/FLTRU/FLTRK 1800-2642 Black PART # DESCRIPTION FOR 17-23 FLHT/FLHR/FLHX/FLHFB/FLTRX/FLTRU/FLTRK (CONT) 1800-2643 Chrome ROAD RAGE 2-INTO-1 SYSTEMS* • Stepped headers merge into a true reverse-cone megaphone muffler • 1 3/4” headpipe steps up to 1 7/8” into the collector to increase flow and improve performance • 4” muffler body with billet end cap (24” long) • Removable spiral-core louvered baffle included • Includes heat shields and mounting hardware • 12mm and 18mm O2 sensor ports • Made in the U.S.A. 1800-2643 1800-2642 *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
JANUARY 2024 THE DRAG SPECIALTIES 3 dragspecialties.com PART # DESCRIPTION FOR 09-16 FLHT/FLHTK/FLHX/FLHR/FLTRX/FLTRU/FLTRK MODELS 1802-0410 Chrome PART # DESCRIPTION FOR 09-16 FLHT/FLHTK/FLHX/FLHR/FLTRX/FLTRU/FLTRK MODELS (CONT) 1802-0411 Matte black POWER DUALS PCX™ HEADER SYSTEMS* • PCX™ (Power Chamber Exhaust) Technology • Chambered high-flow catalyst cartridge designed to increase torque • Catalysts repositioned downstream for rider comfort • Full-coverage heat shields • Accepts 95-16 style mufflers (sold separately) • Mounting hardware and installation instructions included • Made in the U.S.A. NOTE: 49-state emissions compliant 1802-0411 1802-0410 PART # DESCRIPTION FOR 91-09 FXD MODELS 1801-1785 Chrome 1801-1787 Black 3” ROUND TWIN SLASH SLIP-ON MUFFLERS* • Feature 21/2” muffler bodies shielded by 3” fullcoverage heat shields for a blue-proof look • Increased performance with a throaty growl • Standard louvered core baffles included • Sold in pairs • Made in the U.S.A. 1801-1785 1801-1787 *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
JANUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 4 FOR 19-23 SCOUT/SCOUT BOBBER/SCOUT SIXTY PART # DESCRIPTION 49-STATE 1811-45171 Chrome 1811-45191 Guardian Black PART # DESCRIPTION RACE ONLY 1811-4518 Chrome 1811-4520 Guardian Black 1 Qualified Manufacturer Declared 49-State Federal Emissions Compliant exhaust system. GRAND NATIONAL SLIP-ON MUFFLERS* • Performance slip-on mufflers that will wake up the sound of your Scout • Direct bolt-on to the factory header pipes; do not require EFI tuning • Steel muffler bodies • Aluminum end caps • Stainless steel baffles • Removable dB reducer is J2825 compliant • Sold in pairs • Made in the U.S.A. 1811-4520 1811-4517 PART # DESCRIPTION FOR 07-09 FLSTN/FLSTSB 1801-1780 Chrome 1801-1781 Black FOR 07-09 FLSTF/B, FXSTD 1801-1782 Chrome PART # DESCRIPTION FOR 07-09 FLSTF/B, FXSTD (CONT) 1801-1783 Black FOR 07-09 FXST/B/C, FLSTC, FXCW/C 1801-1784 Chrome 3” ROUND TWIN SLASH SLIP-ON MUFFLERS* • Feature 21/2” muffler bodies shielded by 3” full-coverage heat shields for a blue-proof look • Increased performance with a throaty growl • Standard louvered core baffles included • Sold in pairs • Made in the U.S.A. 1801-1784 1801-1780 1801-1783 *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
JANUARY 2024 THE DRAG SPECIALTIES 5 dragspecialties.com PART # DESCRIPTION FOR 99-23 FLHR/FLHRXS (EXCEPT FLHRS) 2330-0289 5566, two 5” speakers and two 6” speakers 2330-0290 6 x 9, two 6” x 9” speakers 2330-0288 Quadzilla, four 5” speakers TOUCHSCREEN FAIRINGS • Superb wind protection and updated classic styling similar to 14 and newer H-D batwing fairings • Made from OEM-quality injection molded plastic inner and outer fairing • Plastic is UV stable; won’t become brittle or fade in the sun like ABS plastic • Polished outer fairing for easy paint application • Lightly textured inner fairing for OEM look and feel; can be painted for custom application • Comes with waterproof 6.75” touch screen including AM/FM radio, Bluetooth® wireless audio and handsfree phone, and is compatible with Apple Car Play and Android Auto (USB only) • Stereo output is 320-watts (80W x 4) • Unit includes front, rear and sub pre-amp outputs for easy upgrading • Includes USB and AUX inputs • Comes fully assembled with speakers • Concealed internal antenna for a clean look • Includes a 12” clear windshield; will accept any 14 and newer H-D batwing OEM or aftermarket windshield, windshield or vent trim or wind deflectors • Made in the U.S.A. 2330-0289 2330-0290 2330-0288 PART # DESCRIPTION 2330-0274 For 97-23 FLHR/FLHRXS 2330-0275 For 18-20 FXLR, 18-23 FXBB, FXBBS, FXST, FXLRS, FXLRST 2330-0276 For 06-17 FXD FXRP FAIRING FIT KITS • Klassic reproduction designed to elevate your motorcycle’s style and performance • Comes as a complete kit • Polyester-primed fiberglass fairing • Powdercoated neck bracket • 7” headlight mount • 9” Flare™ windshield for FXRP style fairings in dark smoke (PART #2310-0635) included • All necessary fasteners and hardware • Made in the U.S.A. NOTE: Requires relocation of turn signals. 2330-0275 2330-0274 PART # DESCRIPTION 2040-3062 For 14-23 FLHX//FLHXS/FLHTK, 15-23 FLTRX/FLTRXS, 22-23 FLHXST/FLTRST/FLTRKSE, 20-23 FLTRK, 15-22 FLHXSE, 18-22 FLTRXSE, 19-22 FLHT, 14-19 FLHTCU, 15-16 FLHTCUL, FLTRUSE, 16-19 FLTRU, 15-18 FLHTKL, 14-21 FLHTKSE DUAL COLOUR LED UNIVERSAL FAIRING STRIPS • Two low profile, flexible LED light strips add visibility and function to the front of any vehicle • Each strip measures 151/2” in length and contains 36 dual colour amber/white LEDs to provide a bright white running light and full-contrast amber turn signal • LED strips are pre-taped for mounting and can be cut every 3 LEDs (11/4”) to create a custom length • Strips are equipped with pass-through male and female JAE connectors for plug-and-play installation under the fairing • Connectors can also be removed for universal, hardwire installation on any 12V DC motorcycle • Sold in pairs 2040-3062
JANUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 6 PART # DESCRIPTION FOR SOFTAIL, DYNA, FXR, XL AND CUSTOM MODELS 3501-1963 Expedition saddlebags PART # DESCRIPTION FOR SOFTAIL, DYNA, FXR, XL AND CUSTOM MODELS (CONT) 3511-0030 Cooler bag (ea.) EXPEDITION SADDLEBAGS • Easy-on, easy-off installation with included throw-over mounting brackets • One-piece L-shaped backing for increased load capacity • Made from 1680D ballistic nylon • Structured to hold shape • MOLLE attachments provide universal anchoring points to secure the bag down as well as use for additional attachments • Side release buckles on top of lid allow for additional attachments • Easy access lid with metal G-hooks open to main compartment • Compatible with fixed or detachable sissy bars • YKK® zippers • High-viz interior for improved visibility • Work with most stock taillight and blinker assemblies (must have a minimum of 15” between shocks and blinkers) • Maximum fender width of 12” • Combined storage capacity of 21 liters • 14” L x 6” W x 10” H • Proprietary cooler bag is fully insulated to regulate temperature (sold separately) NOTE: Cooler bag is not watertight, using sealed ice packs is recommended. PART # DESCRIPTION 3501-1961 For Dyna, Softail and Custom models ESCAPE V2 SADDLEBAGS • Easy-on, easy-off installation with included throw over mounting brackets • Made from 1680D ballistic nylon • Combined storage capacity of 18 liters • Structured to hold shape • MOLLE attachments for universal anchoring points to secure the bag down and use for additional attachments • Compatible with fixed or detached sissy bars • YKK® zippers • Hi-viz interior to improve interior visibility • Work with most stock taillight, and blinker assemblies (must have a minimum of 13” between shocks and blinkers) • Maximum fender width of 12” • Waterproof cover included • Rigid mount kit also available for select models (PART #3501-1962) • Dimensions: 13” L x 6” W x 9” H 3511-0030 3501-1963 PART # DESCRIPTION 3501-1960 For Softail, Dyna, FXR, XL and Custom models ESSENTIAL V3 SADDLEBAGS • Easy-on, easy-off installation with included throw-over mounting brackets • Made from 1680D ballistic nylon • 10 liter total storage capacity • Structured to hold shape • MOLLE attachments for universal anchoring points to secure the bag down as well as use for additional attachments • Compatible with fixed or detachable sissy bars • YKK® zippers • High-viz lining to improve interior visibility • Adjustable yoke • Work with most stock taillight, sissy bars, and blinker assemblies (must have a minimum of 12” between shocks and blinkers) • Rigid mount kit also available separately for select models (PART #3501-1962) • Dimensions: 11” L x 5” W x 8” H PART # DESCRIPTION 3501-1962 For 18-23 Softails and 99-17 Dyna (except models with factory saddlebags) HARD MOUNT SADDLEBAG BRACKETS • Hard mount brackets for Thrashin Escape and Essential saddlebags • Black powdercoated mild steel • Includes left and right specific brackets • Includes hardware and spacers for a variety of models • Adjustable 1/2” up and down • Easy installation • Work with stock signals on Softail models • Turn signal relocation required on Dyna models NOTE: This kit is also compatible with XL, FXR and Custom applications but may require hardware and/ or spacers not provided. Turn signals may also require relocation depending on model.
JANUARY 2024 THE DRAG SPECIALTIES 7 dragspecialties.com DRAG SPECIALTIES SEATS Quality seats built by hand using only the finest materials. The highly skilled team of craftsmen and women take pride in creating innovative designs that enhance the style and comfort of American V-Twins. Their popular Predator style seat is now available for the latest M-Eight bikes with a smooth or double-diamond stitch pattern to enhance the look and comfort of your ride. PART # DESCRIPTION 0802-1516 Smooth 0802-1517 Double diamond, black thread PART # DESCRIPTION 0802-1518 Double diamond, silver thread 0802-1519 Double diamond, red thread PREDATOR SEATS • High-quality automotive grade vinyl • Molded polyurethane foam for maximum comfort and styling • Features a 6.5’’ tall driver support with unique styling • Seat is made narrow up front for better leg clearance • 3/16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Fits with all Drag and most H-D sissy bars • Includes all mounting hardware • Made in the U.S.A. PART # DESCRIPTION FOR 06-17 FLD/FXD/FXDWG 0803-0697 TR PART # DESCRIPTION FOR 06-17 FLD/FXD/FXDWG (CONT) 0803-0698 Front LS TOUR STEP-UP SEATS • Classic Step-Up performance with added passenger area comfort • Lattice stitch (LS) seats infuse old-school lattice stitch retro styling with a modern twist • Tuck-n’-roll (TR) seat features true tuck-n’-roll styling • High lumbar keeps the rider locked into the seat • Included driver’s backrest adds support • Features Saddlemen’s Ultra-Foam which is formulated to provide a perfect balance of rigidity and user compliance with integrated GelCore™ technology • Whisper-grain SaddleHyde™ cover • Installs easily with all necessary mounting hardware and instructions included • Made in the U.S.A. 0803-0697 0803-0698 0802-1517 0802-1518 0802-1519 0802-1516 FOR 18-23 FXLR/FXLRS/FXLRST, 18-21 FLSB; 281/2” L OVERALL (121/2” W FRONT)
JANUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 8 PART # DESCRIPTION 1020-3472 For 21-23 M-Eight models 1020-2325 For 14-20 FLHT/FLHX/FLHR/FLTRX/FLTRU/FLTRK, 11-20 Softail models, 12-17 Dyna models, 14-22 XL (except RH Sportster) and 15-20 XG models (6-pin connector) 1020-2324 For all H-D models w/ Delphi EFI (except 11-20 Softails, 12-17 Dynas, 14-20 Dressers, 14-22 XL, 02-17 V-Rod, and 15-20 XG models) (4-pin connector) POWER VISION* • The quickest, most powerful flash tuner on the market • The sophisticated, yet easy-to-use, 3.5” full-colour touchscreen display mounts to handlebars with integrated AMPS 4-hole threaded inserts; also mounts to most aftermarket accessory mounts that feature AMPS 4-mounting options • The display’s interface cable plugs directly to the bike’s diagnostic connector • NO COMPUTER REQUIRED; simply select the tune and follow the on-screen prompts to flash the bike; tunes can also be edited directly from the Power Vision • Utilizes WinPV (Windows PC-based tuning application) • Stores up to six different tunes that can be flashed to the bike • Downloads and stores the stock calibration in case OEM restoration is needed; stock calibration can also be saved as an editable copy and used as a starting point • Dynojet preconfigured tunes are preloaded on the unit; Power Vision will identify the bike’s information and automatically sort hundreds of applicable, dyno-proven tunes • Custom tunes can be loaded by a tuning shop or received via email and loaded onto the device • Displays all J1850 H-D vehicle data, wide-band air fuel ratio2 and various calculated channels (including MPG instant and trip MPG) • AutoTune Basic and Pro3 calculates and stores fuel trims to optimize fuel curve • Checks and clears diagnostic codes • Features adaptive trims and idle offset (with bike running) • Black series features a flat black outer case • See Dynojet website http://www.dynojet.com/powervisiontune-license-programs.aspx for information about purchasing additional Power Vision tune licenses. • Made in the U.S.A. MANUFACTURER’S NOTE: All Power Vision returns and/or adjustments must be made directly with Dynojet Research. The Power Vision may be used on any bike to read and clean trouble codes. Power Vision DESCRIPTION MATERIAL/THICKNESS PART # FOR 17-23 M-EIGHT 3.937” bore MLX, .036” 0934-7528 4.250” bore MLX, .036” 0934-7529 4.320” bore (air/oil cooled and Twin cooled heads) MLX, .032” 0934-7530 4.320” bore (air/oil cooled and Twin cooled heads) MLX, .036” 0934-7531 4.320” bore (air/oil cooled and Twin cooled heads) MLX, .040” 0934-7532 4.430” bore (air/oil cooled and Twin cooled heads) MLX, .036” 0934-75331 4.500” bore (air/oil cooled and Twin cooled heads) MLX, .036” 0934-75341 1 Oil port must be welded and plugged. REPLACEMENT HEAD GASKETS • MLX Gasket (Multi-Layer-Xtreme) features an extra “stopper” fold-over layer providing a torque limiting surface that prevents yielding of the combustion seal • Proprietary high-temperature coatings along with embossments provide a micro seal for fluids against the head and block surface • MLX head gaskets are essential for all Milwaukee 8 applications using a Turbo, high compression, nitrous or any power adder modifications • Require no special machining and are installed like a regular MLS head gasket • Sold in pairs for popular bores and thicknesses • Made in the U.S.A. 0934-7528 *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
JANUARY 2024 THE DRAG SPECIALTIES 9 dragspecialties.com PART # DESCRIPTION 2112-1751 For 99-03 FXD/FXDWG 3-PHASE 38A CHARGING KIT • Get more power out of a smaller stator • Kit delivers 17A at 1000 rpm and 38A at 2500 rpm PART # DESCRIPTION 2112-1748 For 00 Softail; 30A at 2500 rpm PART # DESCRIPTION 2112-1747 For 99-03 FXD/FXDWG; 29A at 2500 rpm ALTERNATOR KITS • Kits include stator, rotor, black rectifying voltage regulator and mounting hardware NOTE: Kits contain some imported components. NOTE: Adding electrical accessories increases amperage usage. When doing so, it is important to consider amperage ratings of switches and wires. If you draw too many amps through a switch or wire, it will heat up and may burn. Fuses and breakers are sized to protect wiring and switches. DO NOT CHANGE 30A MAIN BREAKER TO A 50A BREAKER. THE SWITCHES AND WIRING WILL NOT BE PROTECTED. 2112-1748 PART # DESCRIPTION 2107-0332 Electromagnetic dual horn kit ELECTROMAGNETIC DUAL HORN KIT • Dual low/high tone electromagnetic horns • Kit includes horns, mounting bracket, wire harness and relay • 109 db(A) at 2m per horn • Nominal voltage: 12VDC PART # DESCRIPTION 2104-0407 For 17-23 FLHT/FLHR/FLHX/FLTR and FL Trike models 2104-0408 For 18-23 Softail models 8.8 MM SPARK PLUG WIRE SETS • Constructed with silicone throughout the jacket, insulation and core to deliver high-temperature resistance • Rated at SAE Class E J2031 with a continuous operating temperature of 450 °F (232 °C) 2104-0407 2104-0408 PART # DESCRIPTION 2107-0331 For 11-13 FXS, 13-17 FXSB, 14-17 FXDL, 16-17 FXDLS/FXSE, 18-23 Softails ELECTROMAGNETIC HORN KIT • Replace the factory horn with 109 dB (at 2 meters) single, low tone electromagnetic MARCO horn • Includes mounting bracket and nut for installation • Plug and play installation with connection to factory wiring
JANUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 10 PART # DESCRIPTION FOR 17-23 114”/117” M-EIGHT OIL-COOLED ENGINES 0904-0102 Wrinkle black w/ non-highlighted cylinder fins, chain drive cam 0904-0104 Wrinkle black w/ highlighted cylinder fins, chain drive cam 0904-0105 Black granite w/ highlighted cylinder fins, chain drive 0904-0109 Wrinkle black w/ non-highlighted cylinder fins, gear drive cam 0904-0111 Wrinkle black w/ highlighted cylinder fins, gear drive cam 0904-0112 Black granite w/ highlighted cylinder fins, gear drive FOR 17-23 114”/117” M-EIGHT WATER-COOLED ENGINES 0904-0099 Wrinkle black w/ highlighted cylinder fins, chain drive cam 0904-0103 Black granite w/ highlighted cylinder fins, chain drive 0904-0107 Wrinkle black w/ highlighted cylinder fins, gear drive cam 0904-0110 Black granite w/ highlighted cylinder fins, gear drive 132” POWER PACKAGES FOR M-EIGHT 114”/117” ENGINES • Big-bore bolt-on kit increases your 114”/117” with 4.5” stroke M-Eight to 132” with no case machining required • Big bore 4.32” cylinders with 11:1 forged pistons • S&S oil pump/cam plate with a blue anodized finish • Passage plugs are removable for servicing • Independent scavenge sections for flywheel cavity and cam chest • Debris screen in both scavenge pickups • Magnet in cam chest to help prevent debris from entering the oil pump • Increased oil flow capacity on both the oil feed and scavenge side • Adjustable pressure relief valve can be adjusted with the unit installed in the engine • Quickee pushrods with chrome pushrod tubes • S&S premium tappets • S&S hard-anodized, black coated tappet cuffs are billet aluminum construction • Improve tappet stability in high-lift, high-rpm situations • S&S 550 cam designed for big bore applications (gear or chain drive cams available) • S&S valve springs feature high-performance conical single-wire spring design • All necessary gaskets, bearings and hardware for bolt-on installation included • Made in the U.S.A. 0904-0102 0904-0103
JANUARY 2024 THE DRAG SPECIALTIES 11 dragspecialties.com PART # DESCRIPTION FOR 17-23 107” M-EIGHT OIL-COOLED ENGINES 0904-0100 Wrinkle black w/ highlighted fins and chrome pushrod tubes, chain drive cam 0904-0101 Wrinkle black w/ highlighted fins and black pushrod tubes, chain drive cam 0904-0106 Wrinkle black w/o highlighted fins and black pushrod tubes, chain drive cam 0904-0108 Wrinkle black w/ highlighted fins and chrome pushrod tubes, gear drive cam 0904-0113 Wrinkle black w/o highlighted fins and black pushrod tubes, gear drive cam 0904-0114 Wrinkle black w/ highlighted fins and black pushrod tubes, gear drive cam 129” POWER PACKAGES FOR M-EIGHT 107” ENGINES • Big-bore bolt-on kits increases your 107” M-Eight to 129” with no case machining required • 4.32” bore cylinders with 11:1 forged pistons • S&S oil pump/cam plate with a blue anodized finish • Passage plugs are removable for servicing • Independent scavenge sections for flywheel cavity and cam chest • Debris screen in both scavenge pickups • Magnet in cam chest to help prevent debris from entering the oil pump • Increased oil flow capacity on both the oil feed and scavenge side • Adjustable pressure relief valve can be adjusted with the unit installed in the engine • Quickee pushrods with chrome or black pushrod tubes • S&S premium tappets • S&S hard-anodized, black coated tappet cuffs are billet aluminum construction • Improve tappet stability in high-lift, high-rpm situations • S&S 550 cam designed for big bore applications (gear or chain drive cams available) • Feature high-performance conical single-wire S&S valve springs • All necessary gaskets, bearings and hardware for bolt-on installation included • Made in the U.S.A. 0904-0113 0904-0100
JANUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 12 PART # DESCRIPTION 1130-0686 For 90-06 Big Twin (except 06 Dyna) w/stock clutch basket BALL-BEARING LOCKUP CLUTCH KIT • Complete 36T clutch basket assembly with BDL’s ball-bearing lockup clutch • Provides approximately 60% more surface contact area than stock clutch for smooth, sure power transfer • Lockup design applies extra pressure to the clutch plates for positive engagement with no clutch slippage • No increase in lever pull effort • Includes 66T ring gear and 9T starter pinion gear • Made in the U.S.A. NOTE: Use of a 25T compensating sprocket recommended. INNER CLUTCH HUBS • Improved inner clutch hubs with reinforced insert • Accept all OEM components 1132-1829 1132-1830 PART # DESCRIPTION FOR 14-23 FLHX/FLTRX/FLHRXS MODELS (EXCEPT 23 FLHXSE/FLTRXSE) 2010-1499 Chrome w/ red lens 2010-1500 Black w/ red lens 2010-1498 Black w/ light smoke lens LIGHTSTRIKE TAILIGHT AND LICENSE PLATE HOLDERS • Replace the entire OEM lighting assembly for a complete rear end transformation • Features a bright amber and red LED run, turn and brake light with easy plug-n-play installation • License plate mount has hidden fasteners for an extra-clean look • Available in chrome or black with red or light smoke lens • Has an animated display with adjustable timer settings to give you full control and ability to customize your lighting • Brake burst mode increases your visibility to traffic approaching you from the rear NOTE: DOT compliant. 2010-1498 2010-1500 PART # DESCRIPTION 2030-2288 Gloss black 2030-2289 Chrome LICENSE PLATE FRAME WITH RED LEDS • Three banks of auxiliary red LEDs and tag illumination • 20 red LEDs are flush mounted on either side, with a row of 50 dual intensity red LEDs flush mounted across the bottom. 6 white LEDs are embedded along the inside edge for tag illumination • All wires exit a single location on the back side of the frame, the 43” wires allow length for routing and connecting wires • Works with standard 4” x 7” motorcycle tags • Compatible with 12VDC systems with a negative ground • Mounting hardware included 2030-2289 2030-2288 PART # DESCRIPTION 1132-1830 For 17-23 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK and H-D Trike; repl. OEM #37000083 1132-1829 For 18-23 Softail; repl. OEM #37000239 2010-1499
JANUARY 2024 THE DRAG SPECIALTIES 13 dragspecialties.com PART # DESCRIPTION 1.25” STRAIGHT RISERS 0602-1443 6” 0602-1444 8” 0602-1445 10” 1.25” PULLBACK RISERS 0602-1446 6” 0602-1447 8” 0602-1448 10” PART # DESCRIPTION 1” STRAIGHT RISERS 0602-1437 6” 0602-1438 8” 0602-1439 10” 1” PULLBACK RISERS 0602-1440 6” 0602-1441 8” 0602-1442 10” PERFORMANCE RISER KITS • Beautifully machined billet aluminum risers not only look great but provide strength and comfort for your bike • Straight risers are available in 6”, 8” and 10” heights • Pullback risers are available in 6”, 8” and 10” heights and have 2” of pullback • Available with a 1” or 1.25” clamping area for use with 1” or 1.25” handlebars • Machined pockets not only reduce weight but add a distinct look • Top clamp accommodates the use of LA Choppers specific gauge mounts (sold separately) • Eye-catching bronze finish • Made in the U.S.A. 0602-1448 0602-1443 PART # DESCRIPTION FOR 21-23 FLHT/FLHR/FLHX/FLTR/FLHTCUTG/FLRT/FLTRT MODELS 0610-2253 Chrome lever set 0610-2254 Matte black lever set WIDE BLADE LEVER SETS • Top-quality lever sets resemble the late-style wide, flat design • Constructed of lightweight aluminum • Levers are compatible with OEM lever perches • Sold in sets 0610-2253 0610-2254 PART # DESCRIPTION FOR 21-23 FLHT/FLHR/FLHX/FLTR/FLHTCUTG/FLRT/FLTRT MODELS 0610-2255 Chrome lever set 0610-2256 Black lever set SLOTTED WIDE BLADE LEVER SETS • Strong, high-quality aluminum with CNC-machined slots • Includes anti-rattle clip and clutch lever pivot bushings (except 14-21 Dressers) • Sold in sets 0610-2255 0610-2256
JANUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 14 PART # DESCRIPTION 4405-0916 For 98-13 FLTR/FLTRX models ROAD GLIDE XL SERIES SPEAKER/AMPLIFIER KIT • Amplifier features R.E.M.I.T. circuitry for excellent FM reception from a Class D amp • Peak Power Handling is 225W • Available in a black finish • Not compatible on CVO models with factory amplifiers installed PART # DESCRIPTION 0613-2100 For 21-23 FLHT/FLHR/FLHX/FLTRX/FLTRK; repl. OEM #36700249 POLISHED REPLACEMENT CLUTCH LEVER • Constructed of lightweight aluminum with a polished finish • Compatible with OEM lever perches • Sold each PART # DESCRIPTION FOR 08-23 FLHT/FLHR/FLTRX/FLTRU/FLTRK/FLHX, H-D FL TRIKE, 16-23 SOFTAILS, 20-23 ELW, 16-17 FXDLS, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE 0630-3075 Klassic, black 0630-3076 Klassic, chrome 0630-3077 Air Cushion Klassic, black 0630-3078 Air Cushion Klassic, chrome PART # DESCRIPTION FOR 99-17 TWIN CAM AND 86-22 XL MODELS (EXCEPT 08-17 DRESSERS, H-D FL TRIKES, 16-17 SOFTAILS, 16-17 FXDLS, 14-15 FLSTNSE, 13-15 FXSBSE, 11-12 FLSTSE, AND RH SPORTSTERS) 0630-3079 Klassic, black 0630-3080 Klassic, chrome 0630-3081 Air Cushion Klassic, black GRIPS • Seamless Rubber Grip technology • Billet aluminum end caps and collars • Match for Khrome Werks Klassic muffler end caps • Fit bars made for 1” grips • Made in the U.S.A. 0630-3078 0630-3079
JANUARY 2024 THE DRAG SPECIALTIES 15 dragspecialties.com LEGEND SUSPENSIONS Jesse Jurrens, founder of Legend Suspensions, says pride and quality are two of the most important words in the company’s mission statement. He started building his world-leading suspension systems in his basement and his products have gone on to set the industry standard. Legend Suspensions uses only pristine, quality materials and components manufactured in America to ensure the highest levels of quality and performance. PART # DESCRIPTION 0414-0740 For 17-23 FLHTK/FLHTCU/FLHX/FLHR/FLHRC/FLTRU/FLTRX 0414-0739 For 14-16 FLHTK/FLHTCU/FLHX/FLHR/FLHRC/FLTRU/FLTRX 0414-0741 For 97-13 FLHTK/FLHTCU/FLHX/FLHR/FLHRC/FLTRU/FLTRX AXEO COMFORT FRONT SUSPENSION FOR FL TOURING MODELS • Designed to be used with stock diameter front wheels • Includes two matched mono-tube, dual-chambered damper cartridges, and two top-out springs • Available only in standard length to maintain factory ride height • Easy installation • Made in the U.S.A NOTE: This product is NOT designed for use with 21” and 23” wheels. NOTE: Does not fit FLHXSE/FLTRXSE models with inverted forks. PART # DESCRIPTION 1313-0247 For 17-23 FLHTCUTG/FLRT/FLTRT M-EIGHT TRIKE REAR LIFT KIT • Maximizes the rear ride height on 2017 and newer trikes by replacing the OEM lower shock mount brackets • Relocates the lower shock mounting points resulting in an additional 3/4” of ground clearance at the rear of the trike • Levels out trike models that sit low in the rear from the factory • Reduces dragging and scuffing of mufflers when rolling through drain basins, backing up to curbs, or loading on a trailer • Easier steering due to less trail in the front end • Bolt-on installation • Only for use with OEM length shocks (13”) • Made in the U.S.A. NOTE: For use with stock head pipes only • Legend’s comfort touring spring rate provides improved small bump compliance, superior ride quality, as well as increased resistance to bottoming for all-day comfort • Threaded pre-load adjuster allows tuning for various rider weights and increased pre-load range • Ride quality is smooth and controlled with improved stability, cornering, and traction • Reduces front-end dive during aggressive braking and maneuvering • Minimizes dragging floorboards and pegs • Designed for optimum performance with Legend rear suspension 0414-0740
JANUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 16 PART # DESCRIPTION 0416-0114 For 18-23 FLDE, FLFB/S, FLHC/S, FLSL, FXBR/S, FXBB/S,FXLR, FXST models 0416-0115 For 18-23 FLSB, FXFB/S, FXRST, FXLRS/T models SLAMMER FORK KITS • Designed to provide a lowered front end and superior ride performance • Mean, aggressive look and a reduction in front end “dive” during braking, giving you more control and confidence • High tensile SiCr (Silicon Chrome) Wire • Progressively wound • Precision ground • Kits include components to drop forks either 1” or 2” PART # DESCRIPTION FOR 18-23 FXLR/FXLRS/FXLRST/FXST/FXBB/FLSL/FXFBS/FLSB 0505-2347 Bronze front guards 0505-2348 Black front guards PART # DESCRIPTION FOR 18-23 FXLR/FXLRS/FXLRST/FXST/FXBB/FLSL/FXFBS/FLSB (CONT) 0505-2345 Bronze rear guards 0505-2346 Black rear guards M-EIGHT SOFTAIL FRAME GUARDS • Made from steel • Black or bronze finish • Include oil cooler cover and black bumper pads • Front and rear guards sold separately 0505-2345 0416-0114 0505-2345
JANUARY 2024 THE DRAG SPECIALTIES 17 PRECISION CAST HURRICANE 3D WHEELS • Cast one piece design wheels at a fraction of the cost of billet or forged wheels • Includes bearings and valve stems installed by Coastal Moto • Wheels are designed to accept custom lug-mounted rotors • Custom rotors allow the use of the stock style '00-07 calipers PRECISION CAST LARGO 3D WHEELS • Cast one piece design wheels at a fraction of the cost of billet or forged wheels • Includes bearings and valve stems installed by Coastal Moto • Wheels are designed to accept custom lug-mounted rotors • Custom rotors allow the use of the stock style '00-07 calipers LARGO FRONT LARGO REAR FITMENT YEARS WHEEL FRONT/REAR SIZE SOLID BLACK FL TOURING W/ABS TPMS COMPATIBLE 08-UP LARGO FRONT 21 X 3.5 0201-2447 FL TOURING NON NON ABS 08-UP LARGO FRONT 21 X 3.5 0201-2448 FL TOURING 00-07 LARGO FRONT 21 X 3.5 0201-2449 FL TOURING W/ABS TPMS COMPATIBLE 09-UP LARGO REAR 18 X 5.5 0202-2223 FL TOURING NON ABS 09-UP LARGO REAR 18 X 5.5 0202-2224 FITMENT YEARS WHEEL FRONT/REAR SIZE SOLID BLACK FL TOURING W/ABS TPMS COMPATIBLE 08-UP HURRICANE FRONT 21 X 3.50 0201-2450 FL TOURING NON/ABS 08-UP HURRICANE FRONT 21 X 3.50 0201-2451 FL TOURING NON ABS 00-07 HURRICANE FRONT 21 X 3.50 0201-2452 FL TOURING W/ABS TPMS COMPATIBLE 09-UP HURRICANE REAR 18 X 5.5 0202-2225 HURRICANE FRONT HURRICANE REAR
RkJQdWJsaXNoZXIy NDI5NTY=