PART # DESCRIPTION EMIS* 1801-1811 For 21-24 RA1250/1250S 4 SLIP-ON MUFFLER • Stainless steel construction with a show-quality brushed finish • Carbon fiber end cap and heat shield • Weighs approximately 20% less than the stock muffler • Removable dB reducer is J2825 compliant • Made in the U.S.A. NOTE: Will fit CVO model if stock muffler guard is removed. THE DRAG SPECIALTIES OCTOBER 2024 DRAGSPECIALTIES.COM OCTOBER 2024
S&S Now you can get the proven performance of an S&S cam chest kit with the added freedom of choosing your own cam profiles. These new kits include everything needed to upgrade your V-Twin cam chest setup - except the cam. More power to choose the power profile you want! Another way S&S is continuing to lead the performance V-Twin motorcycle industry. PART # DESCRIPTION EMIS* GEAR DRIVE KITS FOR 07-17 TWIN CAM AND 06 DYNA 0925-1578 W/ black pushrod tubes 3 0925-1579 W/ chrome pushrod tubes 3 CHAIN DRIVE KITS FOR 07-17 TWIN CAM AND 06 DYNA 0925-1582 W/ black pushrod tubes 3 0925-1583 W/ chrome pushrod tubes 3 PART # DESCRIPTION EMIS* GEAR DRIVE KITS FOR FOR 99-06 TWIN CAM (EXCEPT 06 DYNA) 0925-1576 W/ black pushrod tubes 3 0925-1577 W/ chrome pushrod tubes 3 CHAN DRIVE KITS FOR FOR 99-06 TWIN CAM (EXCEPT 06 DYNA) 0925-1580 W/ black pushrod tubes 3 0925-1581 W/ chrome pushrod tubes 3 CAM CHEST KITS WITHOUT CAMS FOR TWIN CAM • The proven performance of a S&S cam chest kit without the cams; allowing you freedom of choice in cam profiles • Oil pump and cam plate are precision-machined from billet aluminum • Independent scavenge sections for the flywheel cavity and cam chest • Debris screens in both scavenge pickups • Passage plugs are removable for servicing • Magnet in cam chest side to help stop debris from entering the oil pump • Approximately 44% flow increase on the supply side and 58% increase on the scavenge • Pressure relief valve is adjustable with the unit installed • Chain drive kits include S&S High Performance cam chain tensioner • Quickee Pushrods • S&S Precision tappets • Hand-assembled to exacting tolerances • Reduced valvetrain noise from startup to shutdown • Close tolerances for low leak-down rates • Fast pump-up and superior high rpm performance • Made in the U.S.A. 0925-1578 0925-1583 2 OCTOBER 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 1130-0860 For 21-23 RA1250/1250S, RH1250S, 22-23 RH975/975S TORQDRIVE® CLUTCH KIT • TorqDrive® provides more disks in less space, allowing us to add up to six additional friction disks to the clutch pack over stock • More frictions = more torque capacity, thus unlocking the full power of your engine without the need to add stiffer pressure plate springs or a lock-up device • TorqDrive provides smoother shifting and improved lever feel • Rekluse basket sleeves eliminate basket wear and notching • Made in the U.S.A. NOTE: Designed for use with OEM baskets/shells only. PART # DESCRIPTION 1132-1978 For 17-20 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK/HD FL Trike, 17 FLSS/FLSTFBS and all 17-20 CVO models w/ clutch actuator OEM# 37200131A 1132-1977 For 14-16 FLHT/FLHR/FLHX/FLTRX/FLTRU/HD FL Trike, 16 FLSS/FLSTFBS and all 13-16 CVO models w/ clutch actuator OEM# 37200023 1132-1979 For 02-16 V-Rod models w/clutch actuator OEM# 36779-05K HYDRO CLUTCH REBUILD KITS • Rebuild kits for Twin Cam and M-Eight models with hydraulic clutches • Made in Germany PART # DESCRIPTION FOR 17-23 TOURING MODELS 2401-1629 Polished stainless PART # DESCRIPTION FOR 17-23 TOURING MODELS (CONT) 2401-1630 Polished black ENGINE BOLT KITS • Premium stainless steel hardware that adds a touch of real class to your engine • Won’t rust, no plating that will crack or peel • Socket heads for easy installation • Beautiful hand-buffed finish • Bolts and washers included for: crankcase, lifter blocks, transmission bearing cover, rocker covers, cam covers, transmission top and side covers, starter and clutch covers • Kit contents separated and clearly marked for installation location 2401-1629 2401-1630 1132-1978 1132-1977 1132-1979 3 DRAGSPECIALTIES.COM OCTOBER 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 18-23 FXLR/FXLRS/FXLRST/FLSB 0802-1598 Black w/ gold LS 0802-1599 Black w/ grey LS 0802-1600 Black w/ orange LS PART # DESCRIPTION FOR 18-23 FXLR/FXLRS/FXLRST/FLSB (CONT) 0802-1601 Black w/ red LS 0802-1602 Black w/ white LS 0802-1598 0802-1599 0802-1600 0802-1601 0802-1602 PART # DESCRIPTION FOR 08-23 FLHT/FLHX/FLHR/FLTR (EXCEPT 23 FLHXSE/FLTRXSE); 30” L OVERALL (11-1/2” W FRONT) (6” W REAR) 0801-1614 Black logo 0801-1615 Grey logo PART # DESCRIPTION FOR 97-07 FLHR, 06-07 FLHX; 30” L OVERALL (111/2” W FRONT) (6” W REAR) 0801-1612 Black logo 0801-1613 Grey logo SLYFOX PREDATOR SEATS • Features a 6” tall driver support with unique styling • Made from high-quality automotive-grade vinyl in the seating area and carbon fiber on the sides • Lumbar area features Slip Stop™ high-quality PVC material designed with gripping qualities to reduce slippage • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Includes all mounting hardware • Made in the U.S.A. 0801-1613 0801-1614 PRO SERIES SDC PERFORMANCE GRIPPER SEATS • True performance-oriented comfort seats with contoured lines, bucketed driver’s seating area and substantial lumbar support • Crafted with Saddlemen’s carbon fiber on the seating portion, black gripper on the lumbar support and SaddleHyde™ sides • Lattice stitch (LS) design infuses old-school lattice stitch retro styling with a modern twist • Features GelCore™ technology that reduces engine vibration by up to 50% and road impacts by up to 92% for a noticeably comfortable ride • Include matching driver’s backrest • Available in various stitch colors • Made in the U.S.A. 4 OCTOBER 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 0801-1705 Basket weave 0801-1706 Double diamond PART # DESCRIPTION 0801-1709 Pleated seat w/ Gripp tape TAILWHIP SEATS • Take the Kickflip one step further • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for • Molded Marathon Foam • BikerTec custom cover • Highly detailed powdercoated steel carpeted base • Made in the U.S.A. FOR 24 FLHX/FLTRX/FLTRXSTE, 23-24 FLHXSE/FLTRXSE 0801-1705 0801-1706 0801-1709 PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE AND 23-24 FLHXSE/FLTRXSE 3501-2079 Black PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE AND 23-24 FLHXSE/FLTRXSE (CONT) 3501-2080 Chrome SADDLEBAG HINGE COVERS • Remove the cheap looking plastic covers on stock 2024 Road Glide and Street Glide saddlebags and replace them with stylish billet aluminum CNC-machined covers • Easy installation • All hardware is included • Sold in pairs 3501-2080 3501-2079 5 DRAGSPECIALTIES.COM OCTOBER 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 4405-0711 11-13 FLTRU models XL SERIES 450-WATT DUAL AMP/SPEAKER KIT • Complete kit with dual 225-watt amps and front and rear XL series speakers • Includes 57 mesh-front speaker grilles and Road Glide specific mounting plates for both amps • Amplifiers feature R.E.M.I.T. circuitry for excellent FM reception from a Class D amp • All required plug-and-play wiring and mounting hardware to complete the installation is included • Compatible with H-D specific aftermarket radios NOTE: Not compatible on CVO models with factory amplifiers installed. PART # DESCRIPTION 4405-0710 11-13 FLTRU models FRONT/REAR SPEAKER/AMP KIT • Includes Gen 3 5” x 7” front speakers with grilles, rear speakers and 200-watt, 4-channel amplifier • 100% plug-and-play wire harness and custom mounting plate to secure amp inside Road Glide fairing • Comes with everything required for complete installation • System is easily expandable to add second amp in fairing for lower speakers or lids NOTE: Not compatible with CVO models with factory amplifiers installed. PART # DESCRIPTION 4405-0916 For 99-13 FLTR models 225-WATT XL SERIES AMP/SPEAKER KIT • Complete Road Glide-specific kit • Features a 225-watt amp and XL series 5.25” front speakers • Speakers install with supplied mesh grilles; can use factory grille cloth • Amplifier features R.E.M.I.T. circuitry for excellent FM reception from a Class D amp • All required plug-and-play wiring and Road Glide-specific amplifier mounting plate included NOTE: Not compatible on CVO models with factory amplifiers installed. 6 OCTOBER 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
DESCRIPTION PART # 14-23 FLHR/FLHX/FLHT/FLTR (except 23 FLHXSE/FLTRXSE) 4405-0975 RETRO LID KIT • All in one lid kit with Wild Boar 400W amp, Wild Boar 6” x 9”, and cut in lid kit • Easily add 6” x 9” speakers in lids to any existing Wild Boar 2 or 4 speaker kit • Wild Boar Audio 6” x 9” “separates” with crossovers that easily mount to underside of lids • Supplied amplifier mounts to existing mounting plate in bike (if this is 2nd amp) • 1 mm thick “boot worthy” grill mesh with supplied Wild Boar Audio badges • Supplied template makes cutting lids much easier and accurate than current offerings • Includes all required wiring and hardware to complete the installation NOTE: Part #4405-0531 is required if this is 3rd amp in FLHT/FLHX “Batwing” fairing bike. NOTE: Part #4405-0543 is required if this is 3rd amp in FLTR Road Glide fairing bike. PART # DESCRIPTION EMIS* FOR 17-23 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKES 1010-3123 Brushed 1 FOR 08-16 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKES, 16-17 FXDLS, 16-17 SOFTAILS, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE MODELS 1010-3124 Brushed 1 FOR 18-23 SOFTAILS 1010-3123 Brushed 1 PART # DESCRIPTION EMIS* FOR 01-17 TWIN CAM W/ DELPHI EFI, 99-06 TWIN CAM MODELS W/ CV CARB (EXCEPT 08-17 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKES, 16-17 FXDLS, 16-17 SOFTAILS, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE) 1010-3125 Brushed 1 FOR 91-22 XL (EXCEPT RH SPORTSTER) 1010-3126 Brushed 1 VO2 RADIANT V AIR INTAKE KITS • Laser-cut Radiant V stamped steel cover • High-capacity, deep pleated washable air filter element • Force™ Velocity Stack for a strong increase in power • Available in Chrome, Brushed, or Black ceramic finish • Made in Santa Fe Springs NOTE: CVO/114”/117” models and models with SE stage 1 air cleaners will require support bracket H-D part #16400049 to install. 1010-3124 PART # DESCRIPTION EMIS* 1020-4244 For 24 FLHX/FLTRX/FLTRXSTSE 3 THUNDERMAX ECM WITH INTEGRAL AUTO TUNE SYSTEM • Mounts conveniently in place of the factory ECM and plugs in to the existing harness • Utilizes wide-band O2 sensors and works as a closed-loop control system to continuously self-adjust and properly tune the motorcycle’s air/fuel ratio for all riding conditions • Easy installation: replace the factory ECM, install new O2 sensors and harness, load the correct map for your bike, and ride • Includes ThunderMax ECM with Auto-Tune Module, plug-in harness and two wideband sensors, TMax software and communication USB cable, Quick-Start Easy Install and Comprehensive User’s Manual, technical support and free software and updates • Hundreds of maps available to download for your bike (based on model, engine size, exhaust system air cleaner, pistons, cams, etc.) – load the map of your choice and the integral auto-tune will do the rest • Improves throttle response, exhaust sound and driveability • Does not require dyno tuning • Rider can adjust idle speed, rev limit and speedometer calibration • Adjustable front and rear cylinder AFR maps, ignition timing (spark) maps, and startup maps • Works with all popular exhaust systems and is compatible with high-performance camshafts • Supports turbo, nitrous and supercharger applications • Software program allows live monitoring, recording and examination of diagnostic codes and datalogs including number of starts, engine temperature and rpm operation • New maps, software, firmware updates, map analysis and tech support available online at no charge • Made in the U.S.A. NOTE: Does not work on models with VVT (Variable Valve Timing). NOTE: Because of possible clearance issues, some aftermarket exhaust systems may require modifications or relocation of their O2 sensor port bungs. 7 DRAGSPECIALTIES.COM OCTOBER 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
KLOCK WERKS The team at Klock Werks likes to say they are where passion and fuel mix. For more than 20 years the company has grown from garage builders to become an industry leader in the V-Twin motorcycle world. They build quality parts the fit, function and look great. And back every product with a passion to ensure it performs beyond expectations. PART # DESCRIPTION 16”/17”/18”/19” FRONT WHEEL (19” W/ 130/60-19 TIRE) 1401-1056 Henry 1401-1057 Level PART # DESCRIPTION 16”/17”/18”/19” FRONT WHEEL (19” W/ 130/60-19 TIRE) (CONT) 1401-1058 Wrapper HUGGER SERIES FRONT FENDERS • Stamped steel 14-gauge fender for a smooth consistent finish • 13 step E-coated factory-style finish for corrosion resistance • Laser-cut, predrilled for a perfect fit PART # DESCRIPTION 1701-0787 Oversize front radial brake caliper mount 1701-0788 Caliper locating dowel for 12.5” rotors PART # DESCRIPTION 1701-0789 5 mm caliper dropout shim for 13” rotors 1701-0790 Caliper dropout spacer for 15-22 Touring models OVERSIZE FRONT RADIAL BRAKE CALIPER BRACKET • Used to allow radial calipers to mount with oversize 12.5” or 13” oversize front rotors • For both left and right side applications • Designed for use with Nissin or Tokico radial mount calipers • 12.5” rotors require use of caliper locating dowel PART #1701-0788 (sold separately) • 13” rotors require use of caliper drop out shim PART #1701-0789 (sold separately) • For proper clearance 15-22 Touring models may require caliper dropout spacer PART #1701-0790 (sold separately) • Black anodized aluminum construction NOTE: Not for models with spoked wheels or narrow glide front ends 1701-0789 1701-0790 1701-0788 1701-0787 • Experienced increased torsional rigidity as the stronger steel acts as a base • Kits include black E-coated mounting blocks and mounting hardware • Made in the U.S.A. 1401-1056 1401-1057 1401-1058 FOR 23-24 FLHXSE/FLTRXSE/FLTRXSTSE 8 OCTOBER 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 0630-3270 Black anodized 0630-3271 Chrome DEEP CUT COMFORT GRIPS • Billet grips bodies are machined to perfection • Innovative rubber inserts have a soft air cushion feel that dampens vibration for a comfortable ride • Grips have a slightly larger diameter than stock, which helps with hand fatigue during long rides • Matching floorboards and foot/shift pegs available • Available for electronic throttle control applications • Sold in pairs PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 0630-3265 Gold anodized 0630-3266 Red anodized FOR 24 FLHTK/FLTRK/FLHRXS, 08-23 FLHT/FLHR/FLTR/FLHX (EXCEPT 23 FLHXSE/FLTRXSE), 09-24 H-D FL TRIKE, 16-24 SOFTAILS, 20-23 ELW, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE, 16-17 FXDLS AND MODELS W/ AIR-ASSISTED FORKS 0630-3274 Gold anodized 0630-3275 Red anodized FOR 82-17 BIG TWIN AND 82-22 XL (EXCEPT 08-17 DRESSERS, H-D FL TRIKE, 16-17 SOFTAILS, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE, 16-17 FXDLS, RH SPORTSTER AND MODELS W/ AIR-ASSISTED FORKS) 0630-3272 Gold anodized 0630-3273 Red anodized SPEEDLINER GRIPS • Features an oversized 3D knurled rubber design with dual integrated channels for comfort and increased grip • Excellent hand traction and comfort in all riding scenarios • CNC-machined billet inner collar and end cap • Arlen Ness laser logo on each end cap • New internal design installs like factory grips; no glue required for installation • Available for electronic throttle control or cable applications • Sold in pairs PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 0630-3267 Black anodized 0630-3268 Chrome 0630-3269 Brass AIRTRAX GRIPS • Feature an aggressive, but comfortable rubber design that offers excellent hand traction while reducing vibration • Grip end cap is CNC-machined from billet aluminum or brass • Laser-engraved Arlen Ness logo • All grips come with throttle sleeve installed and include grip glue and simple-to-follow instructions • Available for electronic throttle control applications • Matching footpegs and shifter pegs are available separately • Sold in pairs 0630-3267 0630-3268 0630-3269 0630-3265 0630-3275 0630-3270 0630-3271 PART # DESCRIPTION 1621-1168 Chrome PART # DESCRIPTION 1621-1169 Black CHICANE™ DRIVER FLOORBOARDS • Engineered for ultimate rider comfort and performance in all road conditions • 3-1/ 2” longer than OEM floorboards • Floorboards measure 15” x 4-3/ 4” • Vibration damping • Constructed from aluminum and EPDM rubber with stainless steel hardware • Six different mounting positions with 1/ 2” of movement front, back and outwards • Front toe section slightly raised for comfort • Easy installation • Available in chrome or black • Matches the entire Ciro® Chicane™ product line 1621-1169 1621-1168 FOR 80-24 FLHT/FLHX/FLHR/FLTR, 09-13 HD FL TRIKE, 18-24 FLHC/FLDE/FLSL/FLFB, 86-17 FLS/FLST/FLSTC/FLSTF/FLSTN AND 12-16 FLD 9 DRAGSPECIALTIES.COM OCTOBER 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
THRASHIN’ SUPPLY CO. Established in 2014, Thrashin Supply Co. has quickly made a name in the industry for their high-quality V-Twin motorcycle parts and accessories. Their newest custom handlebars feature laser-etched logos and are drilled and slotted for internal wiring so you get a clean finished look to go along with a custom fit and feel to your ride. FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK/SWEEP HIGH BEND 0601-6653 Stainless steel 5-1/2” 32” 5” 20° 0601-6654 Black 5-1/2” 32” 5” 20° 0601-6655 Chrome 5-1/2” 32” 5” 20° MID BEND 0601-6652 Stainless steel 4” 32” 44/5” 25° 0601-6656 Black 4” 32” 44/5” 25° 0601-6657 Chrome 4” 32” 44/5” 25° 1” HANDLEBARS • Drilled and slotted for internal wiring • Knurled for maximum clamp grip • Laser-etched Thrashin logo • Require the use of Thrashin straight or pullback riser kits w/o gauge cutout (see the 2024 Drag Specialties Fatbook) • Made in the U.S.A. NOTE: Accept H-D OEM heated grips. NOTE: FLHX/FLHXSE models require installation of Thrashin’s Street Glide Riser Adapter (available separately, PART #0602-1249) and will lose functionality of the storage drawer within the fairing. BLACK PART # BLACK CHROME PART # CHROME PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 24 FLTRX/FLTRXSTSE, 23-24 FLTRXSE (11/4” CLAMPING AREA) 0601-6460 0601-6461 0601-6462 8” 31” 63/4” 6” 0601-6463 0601-6464 0601-6465 10” 32-1/8” 63/4” 6” 0601-6466 0601-6467 0601-6468 12” 33-9/16” 63/4” 6” 1-1/ 4” MINI MONKEY HANDLEBARS • Bring all the signature shark-nose attitude • Narrowed bars match the width of the open clamp area • Accept the new multi-function switch housings NOTE: Accept H-D OEM heated grips. 0601-6657 0601-6656 0601-6653 0601-6468 0601-6464 0601-6460 10 OCTOBER 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
FITS MODEL DESCRIPTION PART # FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE For use w/ 8”-10” mini Ape Hangers Stainless braided 0652-3016 Black vinyl/stainless braided 0652-3017 Midnight braided 0652-3018 For use w/ 12”-14” Ape Hangers Stainless braided 0652-3019 Black vinyl/stainless braided 0652-3020 Midnight braided 0652-3021 FITS MODEL DESCRIPTION PART # FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE (CONT) For use w/ 15 -17” Ape Hangers Stainless braided 0652-3022 Black vinyl/stainless braided 0652-3023 Midnight braided 0652-3024 For use w/ 18”-20” Ape Hangers Stainless braided 0652-3025 Black vinyl/stainless braided 0652-3026 Midnight braided 0652-3027 REPLACEMENT UPPER CLUTCH CABLES • Correct length for changing handlebars or as a replacement • Available in three finishes: stainless steel with clear shielding and chrome fittings, black vinyl with chrome fittings or midnight black with dark smoke-tinted shielding and pure black fittings • Made in the U.S.A. DESCRIPTION PART # STANDARD (DIMENSIONS 8” X 1.75” X 4.5”) Black, left 0640-1772 Black, right 0640-1773 Chrome, left 0640-1774 DESCRIPTION PART # STANDARD (DIMENSIONS 8” X 1.75” X 4.5”) (CONT) Chrome, right 0640-1775 OEM (DIMENSIONS 5” X 1.75” X 5”) Black, left 0640-1776 DESCRIPTION PART # OEM (DIMENSIONS 5” X 1.75” X 5”) (CONT) Black, right 0640-1777 Chrome, left 0640-1778 Chrome, right 0640-1779 NO. 8 CAFE MIRRORS • Solid, simple, adjustable original café style mirrors • Mirror heads can be locked in place or adjustable • 3.7” x 2.25” café style convex mirror glass • Mirror head swivels on a corrosion-free stainless steel ball joint that provides super-smooth action and longevity • CNC-machined from 6061 billet aluminum • Hard black anodize or chrome-plated finishes • Sold individually • Made in the U.S.A. STAINLESS BLACK MIDNIGHT PART # DESCRIPTION FOR 24 FLHTK/FLTRK/FLHRXS, 21-23 FLHT/FLHX/FLHR/FLTR (EXCEPT 23 FLHXSE/FLTRXSE), 21-24 H-D FL TRIKE 0610-2325 Chrome 0610-2326 Matte black NARROW LEVER SET • Die cast aluminum construction • Narrower profile compared to OEM levers • Available in chrome or matte black • Sold in pairs 0610-2325 0610-2326 PART # DESCRIPTION FOR 24 FLHTK/FLTRK/FLHRXS, 21-23 FLHT/FLHX/FLHR/FLTR (EXCEPT 23 FLHXSE/FLTRXSE), 21-24 H-D FL TRIKE 0610-2327 Chrome 0610-2328 Matte black FOR 15-24 SOFTAILS (EXCEPT MODELS W/ HYDRAULIC CLUTCH) 0610-2323 Chrome 0610-2324 Matte black SHORT LEVER SETS • Die cast aluminum construction • Includes anti-rattle clip and clutch lever pivot bushings • Sold in pairs 0610-2327 0610-2324 0640-1773 0640-1777 0640-1778 11 DRAGSPECIALTIES.COM OCTOBER 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 2001-2790 For 20-24 FLTRK, 15-23 FLTRX/FLTRXS/FLTRXST/FLTRKSE, 22-23 FLTRXST/FLTRKSE, 18-22 FLTRXSE/FLTRUSE, 16-19 FLTRU, 20-22 FLTRUSE, 23-24 FLTRT SHARK DEMON™ HEADLIGHTS • High-performance LED headlights with side-facing position lights to further increase viewing angle and width of the beam pattern • Low beam has six projection LEDs and eight direct-reflective LEDs; 11314 raw/ 5554 effective lumens • High beam has 22 direct-reflective LEDs; 22274 raw/8634 effective lumens • 5500-6000K daytime color temperature • Durable polycarbonate clear lens • Aluminum housing with a gloss black finish • Mounting hardware included; mount brackets are 3 mm thick 304 stainless steel • Waterproof IP67 ingress rating • Direct plug-in wiring harness • DOT and SAE compliant • Engineered in the U.S.A. PART # DESCRIPTION 2001-2792 Shark Demon™ universal side-mount headlight SHARK DEMON™ 7” UNIVERSAL SIDE-MOUNT HEADLIGHT • Low beam projects 3,600 raw/1,382 effective lumens from three projection-style LEDs • High beam adds four additional direct-reflective LEDs with 9,080 raw/3,216 effective lumens • Aluminum housing with gloss black finish • Clear polycarbonate lens • Completely sealed and IP67 waterproof • For use with 12 VDC systems • Universal wiring harness includes direct plug-in adapters • Side mount design with included hardware (no headlight brackets included) • DOT and SAE compliant • Engineered in the U.S.A. PART # DESCRIPTION 2001-2791 For 20-24 FLTRK, 22-23 FLTRXST, 18-22 FLTRXSE, 16-19 FLTRU, 15-23 FLTRX/FLTRXS and 23-24 FLTRT SHARK DEMON™ HEADLIGHT SPACER KIT • Required if installing the Shark Demon™ headlamp kit on models with an aftermarket amplifier installed • Attaches to the headlight bracket, allows an additional 16 mm of space • Compatible with Custom Dynamics PART #s 2001-2749 and 2001-2790 (sold separately) • All necessary hardware included • Steel construction with a black finish PART # DESCRIPTION FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE 2040-3247 Chrome/clear lens PART # DESCRIPTION FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE (CONT) 2040-3248 Black/clear lens PROBEAM® LED HALO FOG LIGHTS • Utilize Cree LEDs to produce a superior beam pattern with a super-bright white LED halo • Clear lens produces a white halo and beam for optimizing light output and distance • 8 mm x 1.25 mounting studs • Easily mount to engine guards with ProBEAM® Tube clamps (PART #s 2040-2345 and 2040-2346, sold separately) • Plug-and-play wire harness • 20 watts, 430 Effective LM • Short circuit and thermal overload protection • Measures 3.2” L x 2.36” D • Sold in pairs 2040-3248 2040-3247 12 OCTOBER 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
RkJQdWJsaXNoZXIy NDI5NTY=