DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES,INCLUDING CALIFORNIA.PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE“COMPETITION USE”ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* FOR 18-23 FXLRST/FLHC/FLSB MODELS 1800-2646 Natural 3 PART # DESCRIPTION EMIS* FOR 18-23 FXLRST/FLHC/FLSB MODELS (CONT) 1800-2647 Black ceramic 3 ASSAULT 2-INTO-1 EXHAUST SYSTEMS • Made from high-quality stainless steel, mandrel bent, then TIG-welded • Includes custom heat shields with wire tied fasteners for race-inspired look • Double slip fit and gusset for additional strength • O2 ports included • Made in the U.S.A. PART # DESCRIPTION 1210-2759 25-tooth drive sprocket REPLACEMENT FRONT SPROCKET FOR 530 CHAIN DRIVE CONVERSION KITS • Replacement front sprocket for conversion kits PART #s 1210-2458 and 1210-1851 (sold separately) • Heat-treated and coated for added durability • Made in the U.S.A. 1800-2646 1800-2647 THE DRAG SPECIALTIES MARCH 2024 dragspecialties.com
MARCH 2024 THE DRAG SPECIALTIES dragspecialties.com 2 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* FOR 18-23 FXST, FXBB/FXBBS, FXLR, FXLRS, FXFB/FXFBS, FLSL AND FLSB MODELS 1800-2667 Stainless steel 2 1800-2671 Black 2 1800-2672 Chrome 2 THE RIPPER 2-INTO-1 SHORT EXHAUST SYSTEMS • Designed with a louder, more aggressive tone than the Shorty Road Rage M8 Softail exhaust systems • Stepped 13/ 4” to 17/ 8” headpipes • Fully welded one-piece design • Catalyzed compliant baffle core • Full heat shields • Angle cut end cap • 18mm O2 bungs with 12mm adapters • Made in the U.S.A. 1800-2667 1800-2672 1800-2671
MARCH 2024 THE DRAG SPECIALTIES 3 dragspecialties.com PART # DESCRIPTION 4401-0129 JHD910BT Bluetooth® mini radio JHD910BT BLUETOOTH® MINI RADIO • 12V DC power • AM/FM electronic tuner (US/Euro) • Front-and rear-panel audio Aux-in for use with iPod®, MP3 players and portable CD players • Listen to music your own way through Bluetooth®-enabled stereo headphones or built-in 15W stereo amplifier • Works with most factory installed speaker/antenna systems or our JENSEN speakers (antenna sold separately) • 7-channel NOAA weatherband tuner • Weather Alert automatically switches to WB mode when NOAA warning broadcast is received • Two-wire connection prevents battery drain when vehicle is not in use • Clock runs up to 30 days when vehicle battery is disconnected • Corrosion- and UV-resistant faceplate • 30 programmable station presets (18FM, 12AM) • Built-in job site work timer • Electronic seek up/down/volume/bass/treble/balance • 12/24 hour clock • Backlit controls with selectable amber or green illumination colors • Daylight readable display with wide-viewing angle • One-touch audio mute • Dimensions: 5 3/ 16” W x 3 3/ 8” H x 1 7/ 8” D NOTE: Can be used with 7/ 8”, 1” and 1 1/ 4” bar mount PART #4401-0051. PART # DESCRIPTION 4405-0154 6.5” High-performance coaxial speaker w/ silk dome tweeter MSX60RV 6.5” HIGHPERFORMANCE COAXIAL SPEAKER WITH SILK DOME TWEETER • Weatherproof design for outdoor use • UV/corrosion-resistant material • One-piece molded chassis with integrated drip-edge • Silk dome tweeter • 6.5” polypropylene woofer • Magnet weight: 11 oz. • Mounting depth: 2.3” PART # DESCRIPTION 4405-0153 Universal 5.25” speaker MS5006B 5.25” DUAL-CONE MARINE-GRADE SPEAKER • Sensitivity: 91 dB • Frequency: 79hz-20kHz • Nominal impedance: 4-ohms • Polypropylene woofer: 5 1/ 4” • Magnet: 2.9 oz. • Mounting hole dia.: 4 1/ 2”; mounting depth: 1 1/ 2” • Tweeter type: Mylar® whizzer • Max power handling: 30W • Sold each PART # DESCRIPTION 4405-0875 Universal two-way speakers, black UNIVERSAL MOUNT TWO-WAY SPEAKERS • 60W (30W RMS) max handling power • Waterproof bridged woofer/tweeter • Polypropylene cone • Ferrofluid cooler on tweeter • Rubber suspension/surround • Hole size: 5” • Impedance: 4-ohms • Frequency response: 65hz-20khz • Max power handling: 75W • Sold each
MARCH 2024 THE DRAG SPECIALTIES dragspecialties.com 4 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 08-23 FLHT/FLHTC/FLHTCU/FLHR/FLHX/FLTRX/FLTRU/FLTRK/FLRT MODELS (EXCEPT 23 FLHXSE/FLTRXSE); 30” L OVERALL 113/ 4” W FRONT X 9” W REAR 0801-1495 Smooth, solar-reflective leather 0801-14871 Smooth, vinyl 0801-14901 Double diamond, black thread 0801-14921 Double diamond, silver thread 0801-14941 Double diamond, red thread 1 Not solar-reflective leather. PERFORMANCE PREDATOR 2-UP SEATS • Features solar-reflective leather in the seating area (unless noted) and automotive-grade vinyl on the sides • Features a 53/ 4” tall driver support • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Includes all mounting hardware • Made in the U.S.A 0801-1487 0801-1490 0801-1492 0801-1495 0801-1494
MARCH 2024 THE DRAG SPECIALTIES 5 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 08-23 FLHT/FLHTC/FLHTCU/FLHR/FLHX/FLTRX/FLTRU/FLTRK/FLRT MODELS (EXCEPT 23 FLHXSE/FLTRXSE); 30” L OVERALL 113/ 4” W FRONT X 6” W REAR 0801-1493 Smooth, solar-reflective leather 0801-14891 Double diamond, silver thread 0801-14911 Double diamond, red thread 1 Not solar-reflective leather. PERFORMANCE PREDATOR 1-UP SEATS • Features solar-reflective leather in the seating area (unless noted) and automotive-grade vinyl on the sides • Features a 53/ 4” tall driver support • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Includes all mounting hardware • Made in the U.S.A PART # DESCRIPTION 0214-2723 For 20-23 FXLRS/FXLRST/FXRST, 18-23 FXFB/FXFBS, 19-20 FXDRS, 18-21 FLSB; repl. OEM #43000159 0214-2724 For 18-23 FLFB/FXBR/FXLR/FLDE/FLSL/FLHC/FXST; repl. OEM #43000090 FRONT AXLE COVER INSTALLATION KITS • Required for installation of accessory front axle covers • Kit includes threaded axle spacer, left and right adapters and all hardware
MARCH 2024 THE DRAG SPECIALTIES dragspecialties.com 6 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 14-23 FLHR/FLHT/FLHX/FLTR W/ CHOPPED TOUR-PAK 0822-0551 Road Sofa 0822-0552 Road Sofa PT 0822-0553 Road Sofa LS 0822-0554 Dominator PART # DESCRIPTION FOR 14-23 FLHR/FLHT/FLHX/FLTR W/ CHOPPED TOUR-PAK (CONT) 0822-0555 Step Up LS 0822-0556 Slim RP 0822-0557 Road Sofa CF CHOPPED TOUR-PAK® PADS • Integrate the look of your Saddlemen seat with your Chopped Tour-Pak • Each complete Chopped Tour-Pak pad is built on a strong, rigid base pan and includes all the hardware you need for easy installation • Constructed from durable, comfortable Saddlehyde material • Multiple stitch patterns and designs to match your rider’s saddle, available in black • Made in the U.S.A. 0822-0551 0822-0552 0822-0553 0822-0554 0822-0555 0822-0557 0822-0556 PART # DESCRIPTION 3510-0180 Slim handlebar bag SLIM HANDLEBAR BAG • Offers slim storage with the ability to expand to fit a variety of items • Mount on the front or rear of risers to provide a clean profile between fairings and gas tanks • Constructed from durable 1680D ballistic nylon • High-viz orange interior lining • Front microfiber-lined pocket is perfect for sunglasses or electronics • MOLLE webbing on front pocket • Multiple possible mounting configurations for different size risers • Measures 9” H x 8” W x 2” D
MARCH 2024 THE DRAG SPECIALTIES 7 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION 1050-0472 For 17-23 M-Eight CNC-PORTED 55MM BLACK INTAKE MANIFOLD • 5-axis CNC ported manifold • Maximum aerodynamic efficiency • Textured finish encourages fuel dissipation and atomization • Works with stock or ported heads • High-temp, durable black powdercoat finish • Fits all 55mm throttle bodies • Made in the U.S.A. PART # DESCRIPTION FOR 22-23 FXLRST, 22 FXRST 2001-2738 Black PART # DESCRIPTION FOR 22-23 FXLRST, 22 FXRST (CONT) 2001-2739 Chrome PROBEAM 5.75” LOW RIDER ST HEADLIGHT KIT • Features three high-power advanced optical D lenses that illuminate for low beam • High beam adds five additional lights for an extremely wide beam pattern • Low beam is 1.7 amps @ 12.8V • High beam is 2.23 amps @ 12.8V • Polycarbonate lens • 304 stainless steel mounting bracket • Included wiring adapter connects to the OEM headlight harness with an H4 connector on the ProBEAM® headlight • Mounting hardware included • SAE and DOT complaint • Made in the U.S.A. 2001-2739 2001-2738 PART # DESCRIPTION EMIS* 1020-3513 For 21-23 FLHT/FLHX/FLHR/FLTRX/H-D FL Trike, 23 FLHXSE/FLTRXSE, 21-23 FXBB/S/FXFB/S/FLXR/S/FXST/FLHC/C/FLFB/S/FLSL/FLSB 2 1020-3962 For 14-20 FLHT/FLHX/FLTRX/S/FLTRU/FLTRK/FLHT, 15-20 FLRT, 11-20 Softails (excluding 11-13 CVO Softails), 12-17 Dynas, 14-22 XL models (except 21-22 RH Sportster) and 15-20 XG500/750/750A 2 1020-4028 For 07-13 FLHT/FLHX/FLTRX/S/FLTRU/FLTRK/FLHT, 07-10 Softails, 12-17 Dynas, 07-13 XL models 2 FP4 • Made of polycarbonate plastic/Bluetooth® low energy, FP4 hardware smaller and thinner than the previous generation electronics product • Unit’s LEDs have been simplified so the rider knows exactly what is happening between the FP4 and the rider’s motorcycle • Built from the ground up, Android and iPhone® apps feature a new rider interface and are easier to navigate and use than ever before • Live Data in the FP4 app has been upgraded with a whole new look and an additional gauge to track more crucial data while riding • All necessary hardware and Instructions included • Made in the U.S.A. 1020-3513 1020-4028
MARCH 2024 THE DRAG SPECIALTIES dragspecialties.com 8 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* 0901-02521 For 07-16 Touring models (except Twin Cooled models) 3 1 Require the use of oil line kit PART #0711-0220 for installation (sold separately). T124LC SERIES LONG BLOCK ENGINE • Lower Compression, 10.2:1, for great street torque • Includes Super Stock™ heads and T2 crankcase • TC3 oil pump and cam plate • Easy start 585 gear drive cams with redesigned cam cover • Specs: displacement 124”; bore 41/ 8”; stroke 45/ 8”; S&S forged dish pistons, 11cc; compression ratio 10.2:1 (unless noted) • No fuel system or ignition systems included • Special head machining fits stock length intake manifolds (S&S manifold size 405) • Stock style breathing system; compatible with stock and most performance air cleaners • Stone Gray powdercoat finish matches CVO engine components • Made in the U.S.A. NOTE: Cylinder heads on these engines are specially machined to compensate for the non-stock cylinder length. As a result, they are compatible with manifolds and throttle bodies with stock length intake runners. In addition, the breather vent bolt locations have been adjusted so they are in the stock location, so stock style air cleaner back plates will bolt up to these engines. NOTE: Not recommended for Trike models including conversion models due to the lugging nature of these bikes. PART # DESCRIPTION EMIS* 0901-02511 For 07-16 Touring models (except Twin Cooled models) 3 1 Requires oil line kit PART #0711-0220 for installation. T124HC SERIES LONG BLOCK ENGINE • High Compression, 10.8:1 for the ultimate in street performance • No fuel system or ignition systems included • Special head machining fits stock length intake manifolds (S&S manifold size 410) • Stock style breathing system; compatible with stock and most performance air cleaners • Includes Super Stock™ heads, crankcases, TC3 oil pump and cam plate and easy start 640 gear drive cams • Redesigned cam cover • Specs: displacement 124”; bore 41/ 8”; stroke 45/ 8”; piston type forged flat top; compression Ratio 10.8:1 • Stone Gray powdercoat finish matches CVO granite engine components • Made in the U.S.A. NOTE: Cylinder heads on these engines are specially machined to compensate for the non-stock cylinder length. As a result, they are compatible with manifolds and throttle bodies with stock length intake runners. In addition, the breather vent bolt locations have been adjusted so they are in the stock location, so stock style air cleaner back plates will bolt up to these engines. NOTE: Not recommended for Trike models including conversion models due to the lugging nature of these bikes.
MARCH 2024 THE DRAG SPECIALTIES 9 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 07-23 BIG TWIN AND 06-17 DYNA TRANSMISSIONS (W/ MECHANICAL CLUTCH) 1107-0729 Wrinkle black 1107-0730 Gloss black FUNCTION-FORMED™ CABLE TYPE TRANSMISSION SIDE COVERS • Function-Formed™ style milled from 6061-T6 aluminum • Minimalstic design with maximum exhaust pipe clearance • Compatible with OEM or aftermarket transmissions PART # DESCRIPTION 1106-0245 For 87-23 Touring, Softail and Dyna models with mechanical cable clutches HEAVY-DUTY THROWOUT BEARING KIT • Developed to address the failures of the stock clutch throwout bearing • Features a 97% greater surface area and a 77% great static load capacity than the stock bearing • Includes throwout bearing ball ramp actuator with balls, snap rings and gaskets • Built for abusive and high performance applications • Made in the U.S.A. 1107-0730 1107-0729 • 12-point stainless steel ARP bolts and gasket included • Convenient side transmission fill port • Utilizes the stock clutch cable, ball, and ramp • Available in wrinkle black or gloss black finish • Made in the U.S.A. PART # SIZE 4001-0254 Medium PART # SIZE 4001-0255 Large RATCHET COVERS • Made with ClimaShield Plus - a 300 Denier, solution-dyed polyester fabric with a durable water-repellent top coat for maximum rain and UV protection • Pull cord allows you to loosen the cover to lift over your bike without scratching or doubling over on itself • Ratchet attachment on the drawstring keeps it cinched tight • Protects windshield with a layer of scratch-resistant lining bonded to the inside of the cover • All seams are taped with a textile based tape to ensure maximum strength and waterproofness • Updated heat shield material is used in places that may encounter warm pipes • Polyurethane and mildew-resistant undercoating • Reflective Moisture-Guard’s vent system is 195% larger to help prevent moisture build-up under the cover • Sewn-in hole for wheel lock to be passed through for added security • Includes convenient compression storage bag for easy transporting • For the DowCo cover application chart in the 2024 Drag Specialties FatBook for fitments
MARCH 2024 THE DRAG SPECIALTIES dragspecialties.com 10 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS FIGURATI DESIGNS Jewelry-grade accessories for your American Big Twin! Company founder Kerry Cromer spent more than a decade as a jewelry wholesaler, his experience in that market shows in the level of quality and detail in every Figurati part. Made using 316L jewelry-grade stainless steel, each piece is laser engraved (not machined) and hand-detailed. True heirloom pieces, these parts are designed to add an incredible little piece of art to your motorcycle and last a lifetime. PART # DESCRIPTION 0820-0246 Mirror polished w/ sugar skull design PART # DESCRIPTION 0820-0247 Black w/ sugar skull design DESCRIPTION STAINLESS STEEL PART # BLACK VINYL PART # FOR 14-21 CHIEF/CHIEFTAIN/ROADMASTER/SPRINGFIELD Std. 0652-2934 0652-2936 +6” 0652-2935 - CLUTCH CABLES • Barnett cables are smooth-working, long-lasting and made with the finest components available, making them virtually indestructible • Stainless steel cables with clear coating offer that custom look without the fear of damaging areas that the cables come in contact with • Black vinyl cables are available with standard nylon-lined, PVC-coated casings • Made in the U.S.A. 0652-2936 0652-2934 PART # DESCRIPTION FOR 17-23 M-EIGHT (2-HOLE) 0940-2162 Mirror polished w/ sugar skull 0940-2163 Black w/ sugar skull PART # DESCRIPTION FOR 99-17 TWIN CAM (5-HOLE) 0940-2164 Mirror polished w/ sugar skull 0940-2165 Black w/ sugar skull TIMING COVERS • Take your timing cover to the next level • Made from 316L stainless steel 0940-2162 0940-2165 SEAT MOUNTING KNOBS • Knurled knob is easy to install or remove without tools • Features a raised motif to complete that custom look • Made from 316L stainless steel • SAE 1/4”-20 thread • Does not fit seats equipped with springloaded rear seat bracket FOR ALL TOURING AND TRIKE MODELS EQUIPPED WITH SAE 1/ 4”-20 THREAD SEAT MOUNT HARDWARE 0820-0246 0820-0247
MARCH 2024 THE DRAG SPECIALTIES 11 dragspecialties.com All Rekluse clutch products are precision-engineered and made of high-quality materials to provide the best in performance and durability. Their components are stronger, lighter, longer-lasting and built for maximum performance. Rekluse’s industry-leading auto clutches are optimized for each bike model as it comes from the factory and they’ve designed each clutch to be fine-tuned for every rider. Rekluse’s manual clutches deliver unprecedented performance, tuning and durability with a design that provides more disks in less space, allowing up to four additional friction disks over stock. PART # DESCRIPTION 1130-0308 For 99-17 Twin Cam models w/ cable actuated clutch (except models with slipper/assist clutch) 1130-0312 Fits 13-20 Big Twin models w/ slipper/assist hydraulic clutch (3-coil clutch springs) 1130-0309 Fits 07-16 Big Twin models w/ hydraulic clutch (except models w/ slipper/assist clutch) (diaphragm clutch spring) RADIUSX CLUTCH KITS • RadiusX is a high-performance centrifugal auto clutch combining Rekluse’s TorqDrive® and EXP technologies • TorqDrive provides more clutch discs in less space, allowing for maximum performance within the bike’s existing clutch footprint • Full clutch control and use of the lever is retained for a no-compromise riding experience • RadiusX offers dead-on clutch engagement every time and allows riders to take off and stop in gear without using the clutch lever • Riders will experience maximum power delivery • Rekluse TorqDrive friction discs deliver higher torque capacity and increased power transfer 1130-0308 1130-0309 • With RadiusX, you’ll confidently navigate traffic and slow speed conditions • Rekluse sleeves eliminate basket wear and notching • Installing RadiusX does not require modification to stock components • Shifting the transmission remains unchanged (clutch lever use is recommended for shifting) • Made in the U.S.A. NOTE: Designed for use with OEM or Rekluse clutch baskets/shells only. PART # DESCRIPTION 1130-0307 For 13-23 Big Twin models w/ slipper/assist clutch 1130-0306 For 99-17 Twin Cam models (except models w/ slipper/assist clutch) TORQDRIVE® CLUTCH KITS • TorqDrive provides more disks in less space, allowing us to add up to six additional friction disks to the clutch pack over stock • More frictions = more torque capacity, thus unlocking the full power of your engine without the need to add stiffer pressure plate springs or a lock-up device • TorqDrive provides smoother shifting and improved lever feel • Rekluse basket sleeves eliminate basket wear and notching • Made in the U.S.A. NOTE: Designed for use with OEM or Rekluse clutch baskets/shells only. 1130-0306 1130-0312 1130-0307
MARCH 2024 THE DRAG SPECIALTIES dragspecialties.com 12 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS LOS ANGELES CHOPPERS Located in Huntington Beach, California, Los Angeles Choppers has been a leading manufacturer of metal fabricated goods for more than 25 years. Specializing in the design, tooling, and manufacturing of handlebars, machined aluminum risers, exhaust systems, and much more, they have had a long partnership with Drag Specialties in manufacturing some of the coolest handlebar designs available for your American V-Twin. CHROME PART # GLOSS BLACK PART # END RISE WIDTH 0601-6265 0601-6266 10” 331/ 2” 0601-6267 0601-6268 12” 331/ 2” 0601-6269 0601-6270 14” 331/ 2” 0601-6271 0601-6272 16” 331/ 2” 11/ 2” KAGE FIGHTER T-BARS • High-strength steel tubing • Crossbar has over 35° of rotation to set your perfect angle • 31/ 2” on-center straight risers • Designed for internal wiring • Made in the U.S.A. NOTE: Accepts H-D OEM heated grips. 0601-6272 0601-6265 PART # DESCRIPTION 0602-1466 1.5” straight riser set 0602-1470 3.5” straight riser set 0602-1467 4.5” straight riser set PART # DESCRIPTION 0602-1468 5.5” pull back riser set 0602-1465 Optional one-piece top clamp CHUBBY® BILLET RISERS • Precision-machined from billet aluminum available in gloss black • Works with any standard 1” handlebar, Wild 1 Chubby Bars and most other bars • Uses stock top clamp, aftermarket top clamp, or Wild 1 custom billet top clamps (with offset mounting holes) • Made in the U.S.A. 0602-1470 0602-1467 0602-1468 0602-1466 0602-1465 PART # DESCRIPTION FOR 08-20 FLHT/FLHR/FLTR/FLHX, H-D FL TRIKE, 16-20 SOFTAILS, 20 ELW, 16-17 FXDLS, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE 0630-3106 Spike, diamond, chrome anodized 0630-3109 Spike, diamond, black anodized 0630-3107 Contour, diamond, chrome anodized 0630-3112 Contour, diamond, black anodized PART # DESCRIPTION FOR 82-17 BIG TWIN (EXCEPT 08-17 DRESSERS, H-D FL TRIKE, 16-17 SOFTAILS, 16-17 FXDLS, 13-15 FXSBSE, 11-12 FLSTSE AND MODELS W/ AIR-ASSISTED FORKS) AND 82-22 XL MODELS (EXCEPT RH SPORTSTERS) 0630-3108 Spike, diamond, chrome 0630-3110 Spike, diamond, black anodized 0630-3105 Contour, diamond contour, chrome 0630-3111 Contour, diamond contour, black anodized CUSTOM GRIPS • Feature an ergonomic seamless rubber grip technology • Billet aluminum end caps and collars • Available in chrome or black anodized finishes • Sold in pairs • Matching pegs sold separately • Made in the U.S.A. 0630-3109 0630-3105
MARCH 2024 THE DRAG SPECIALTIES 13 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS CHROME PART # BLACK PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK 0601-6297 0601-6298 Drag bar 0” 31” 9” 53/ 4 “ 0601-6293 0601-6292 Beach bar 243/ 4” 381/ 4” 14” 53/ 8 “ 0601-6295 0601-6294 Beach bar 24” 343/ 4” 14” 5” 0601-62991 - Drag T-bar 73/ 4” 331/ 2” 9” 63/ 4” 0601-63001 - Drag T-bar 91/ 2” 301/ 2” 9” 73/ 4” 1 Will not fit models with integrated lower riser clamp. 11/ 4” BURLY BARS • Bars feature tapered technology in the hand control area allowing the customer the freedom to use OEM or aftermarket controls (including hydraulic clutch controls) • 1” clamping area with 31/ 2” on-center knurling (except T-Bars), dimpled and drilled for internal wiring • Drag T-Bars have 31/ 2” on-center riser mounts • May require extended cable/brake line and wiring • Notched for Throttle-By-Wire applications • Accept heated grips • Made in the U.S.A. NOTE: Not for use with stock risers and handlebar clamp/gauge mount on 883C/1200C models. PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK 0601-6291 Chrome 25/ 8” 351/ 4” 123/ 4” 143/ 4” 0601-6290 Gloss black 25/ 8” 351/ 4” 123/ 4” 143/ 4” 11/ 4” BIKINI BEACH BARS • Get retro with these ‘40s style handlebars • Constructed from high-quality steel tubing with a 31/ 2” on-center knurling • Highly polished, brilliantly chrome-plated or gloss black finish • 1” clamping area • Notched for Throttle-By-Wire applications • Works with hydraulic clutch • Accept heated grips • Made in the U.S.A. NOTE: Not for use with stock risers and handlebar clamp/gauge mount on 883C/1200C models. PART # DESCRIPTION FOR 18-23 M-EIGHT SOFTAIL MODELS 1310-2325 12.2” L PART # DESCRIPTION FOR 18-23 M-EIGHT SOFTAIL MODELS (CONT) 1310-2333 13.5” L M-EIGHT SOFTAIL SLAMMER SHOCKS • Crafted with a high-pressure nitrogen charged damper • Utilizes a hard chrome precision ground piston rod and features a steel monotube construction with an Internal Floating Piston (IFP) to provide incredible ride performance, even at increased speeds • Deflective disc valving • Preload adjustment via threaded preload adjuster with included preload spanner wrench 0601-6290 0601-6291 0601-6297 0601-6293 0601-6292 0601-6300 1310-2325
MARCH 2024 THE DRAG SPECIALTIES dragspecialties.com 14 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION OEM # 1710-4519 For 20-22 FLHR, 20-23 FLHTK/FLTRK (seven-lug mount) 41500157 FRONT BRAKE ROTOR • Direct OEM replacement rotors • Give improved feel, performance and stopping power • Manufactured from high-quality 410 stainless steel • 100% laser-cut for precise fitment • High-quality blanchard-ground for precise flatness and an attractive finish • Compatible with all brake pad compounds and aftermarket calipers • The ideal combination with DP Brakes brake pads • Made in the U.S.A. FRONT BRAKE ROTORS DESCRIPTION STYLE WIDE BAND WITH POLISHED ROTOR CARRIER For all 00-14 Big Twin models, 00-13 XL (except Springers, V-Rod, 06-14 Dyna Glide, 08-14 FLHT/FLHR/FLHX/FLTR and H-D FL Trike) Solid 1710-01491 5-button, floating, round 1710-0151 5-button, floating Contour 1710-0153 For 99 Twin Cam models (except FXSTSB) Solid 1710-01481 5-button, floating, round 1710-0150 1 Rotor carrier is not polished REAR BRAKE ROTORS DESCRIPTION STYLE WIDE BAND WITH POLISHED ROTOR CARRIER NARROW BAND WITH POLISHED ROTOR CARRIER For all 00-17 Big Twin, 00-10 XL models (except V-Rod, 08-17 FLHT/FLHR/FLHX/FLTR and H-D FL Trike) 10-button, floating, round 1710-0157 - 10-button, floating Contour 1710-0155 1710-0145 For 99 Twin Cam models (except FLT) 10-button, floating, round 1710-0156 1710-0146 CUSTOM STAINLESS STEEL ROTORS • Floating rotors have polished stainless steel carriers • Fit standard five-bolt flanges • All measure approximately 11.5” in diameter • Available in wide band or narrow band • Wide band style is for use with OEM-style calipers • Narrow band is for use with smaller aftermarket calipers • Narrow-band brake pad swept area is 1.5” wide • Front rotors are 0.2” thick; rear rotors are 0.24” thick • Sold each 1710-0145 1710-0149 1710-0150 1710-0157
MARCH 2024 THE DRAG SPECIALTIES 15 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION 1610-0702 For 14-23 FLHT/FLHR/FLHX and FLTR models DRIFTER REAR BRAKE LEVER • Designed for ergonomic efficiency • 1” range of length adjustment allows you to run up to 1” longer than stock • Machined from billet aluminum and available in Black Ops finish • Black Ops features a gloss black finish over a contrasting texture black finish for outstanding durability and looks • Stylish match to Performance Machine Drifter Floorboards and Drifter Shift levers (sold separately) • Mounts to the factory location • Includes brake lever toe peg • Sold each PART # DESCRIPTION 1602-1557 For 84-23 FLHR/FLHT/FLHX/FLTR and 00-17 Softail models DRIFTER SHIFT LEVER • Designed for ergonomic efficiency • 1” range of length adjustment allows you to run up to 1” longer than stock • Machined from billet aluminum and available in Black Ops finish • Black Ops features a gloss black finish over a contrasting texture black finish for outstanding durability and looks • Stylish match to Performance Machine Drifter Floorboards and Drifter Brake levers • Mounts to the factory location • Includes shift peg • Sold each PART # DESCRIPTION 2210-0662 For 14-23 FLHT/FLHX/FLTR models 2210-0661 For 14-23 FLHR, 11-17 FXST, 12-23 FXD, 14-22 XL (except RH Sportster) models 2210-0660 For 04-13 FLHR, 04-10 FXST, 04-11 FXD, 04-13 XL models D2 MULTI-FUNCTION METER • High-quality plug & play meter equipped with 8-color changeable LCD display • Designed to mount below cutout top handlebar clamp for a sleek look (handlebar riser kit w/ gauge cutout or gauge relocation kit may be required depending on application; see pages 1240 and 1582 of the 2023 Drag Specialties FatBook respectively) • Features a tachometer/speedometer combination with a programmable shift light and includes gear indicator • Features vital reads such as engine temperature, battery voltage, tire pressure and a complete system of indicator lights to monitor vital signs on bike • Plugs directly into the stock harness and works directly with CANBUS system • Display range: 0-124 mph • Effective temperature range: -4°F-185°F (-20°C-85°C) • 12VDC battery voltage • Measures 37/ 16” L x 11/ 16” W x 25/ 8” H NOTE: XL models may require purchase of separate fuel level sensor kit (OEM PART #6120008) for fuel meter to function properly. 2210-0660
MARCH 2024 THE DRAG SPECIALTIES 16 PART # DESCRIPTION FOR 14-23 FLHT/FLHR/FLHX/ FLTRX/FLTRU/FLTRK AND H-D FL TRIKE MODELS 0403-0181 Blue anodized 0403-0182 Gold anodized 0403-0183 Red anodized METHOD PERFORMANCE BAGGER FORK GUARDS • Lightweight Performance Bagger fork guards inspired from the racetrack • Replace factory fork boots while still protecting inner fork tubes and seals • Universal design works with factory and aftermarket front ends (direct bolt-on installation) • CNC-machined from 6061 billet aluminum • Includesa set of fork dust seals • Sold in pairs 0403-0182 0403-0181 0403-0183 PART # DESCRIPTION FOR 14-23 FLT/FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE 1401-0979 For 16”-19” wheels, w/ satin adapters 1401-0980 For 21” wheels, w/ black adapters FOR 18-23 SOFTAIL MODELS WITH STANDARD FORKS 1401-0978 For 16”-19” wheels, w/ satin adapters THICKY FRONT FENDERS • Redesigned, now features a lengthened front and rear, squared ends and thicker sidewalls • Fenders are built from premium one-piece 14-gauge steel construction, no welds • Added surface area allows for more elaborate custom paint designs • E-coated finish • Pre-drilled for installation • Available with satin or black fender spacers/adapters • Made in the U.S.A. NOTE: Softail fenders do not fit models with inverted forks. 1401-0979 PART # DESCRIPTION 2202-0303 For 22-23 FXLRS/FXLRST/FXRST SLIMLINE CUSTOM DASH KIT • Custom, low-profile look • 3-D molded, hand laid composite material • Can accept console badges • Made in the U.S.A. NOTE: This kit may fit other M-Eight Softail applications with 5 gallon tanks with modification. Does not fit M-Eight Softail applications with 3.8 gallon tanks. 1401-0980
RkJQdWJsaXNoZXIy NDI5NTY=