DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES,INCLUDING CALIFORNIA.PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE“COMPETITION USE”ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* 1800-2673 For 84-94, 99-00 FXR 3 2:1 EXHAUST SYSTEM WITH SUPER BIKER MUFFLER • Stepped 13/ 4” to 17/ 8” stainless steel headpipes • 4” muffler body with tapered end cap • Features TIG welding, 18mm O2 bungs and 12mm adapters • Partial heat shield covers the rear cylinder headpipe • Made in the U.S.A. PART # DESCRIPTION EMIS* FOR 18-21 FLSB AND 22-23 FXLRST 1800-2665 Stainless steel 2 PART # DESCRIPTION EMIS* FOR 18-21 FLSB AND 22-23 FXLRST (CONT) 1800-2666 Black 2 THE RIPPER SHORT ROAD RAGE 2-INTO-1 EXHAUST SYSTEMS • Designed with a louder, more aggressive tone than the Shorty Road Rage M-Eight Softail exhaust systems • Stepped 13/ 4” to 17/ 8” headpipes • Fully welded one-piece design • Utilizes an advanced inner collector for maximum performance • Non-removable high-flow catalytic baffle • Black system features mild steel construction and full heat shields; stainless system has partial heat shields • Hand MIG welding • 18mm O2 bungs with 12mm adapters • Made in the U.S.A. 1800-2665 1800-2666 THE DRAG SPECIALTIES APRIL 2024 dragspecialties.com
APRIL 2024 THE DRAG SPECIALTIES dragspecialties.com 2 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS QUALIFIER 2-INTO-1 EXHAUST SYSTEMS • Full stainless steel construction • Computer-aided stepped header design to maximize power output • Precision bends allow for class-leading ground clearance • Full-length heat shields on front and rear header pipes • Race-inspired S&S end cap • Sound reducer dB insert included • Oxygen sensor ports allow use of wide band or stock O2 sensors • Made in the U.S.A. NOTE: Qualified Manufacturer Declared 50-State legal emissions compliant part on model year 2006-2007 non-CVO Dyna models. PART # DESCRIPTION EMIS* 1801-1801 For 17-23 FLHT/FLHTK/FLHX/FLTRX/FLTRU/FLTRK/FLHR models 4 41/ 2” HI-OUTPUT SLIP-ON MUFFLERS • These mufflers feature a dark chrome finish that matches the Scorched chrome finish of the headpipes found on 23 FLHXSE/FLTRXSE • Designed specifically to address the needs of tuned motors built for high horsepower applications (high compression, large displacement, big cams) • Every aspect is singularly focused to yield maximum horsepower by improving the volumetric efficiency of heavily modified engines as well as stock • Compatible with stock headpipes, Dresser Duals, Power Duals and CVO drop skirt bags • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION EMIS* FOR 06-07 DYNA MODELS (EXCEPT CVO MODELS) 1800-2662 Brushed stainless steel 1 PART # DESCRIPTION EMIS* FOR 06-07 DYNA MODELS (EXCEPT CVO MODELS) (CONT) 1800-2663 Guardian black 1 1800-2663 1800-2662
APRIL 2024 THE DRAG SPECIALTIES 3 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS S&S CYCLE S&S now offers the largest bolt-on big bore possible for the M-Eight - no machining required. The new 136” kits for your 107”/114” and 117” engines will add dramatic torque and power to your ride. Engineered proudly in the U.S.A. by S&S Cycle. PART # DESCRIPTION 0920-0239 For 17-23 M-Eight Touring models MK SERIES ENGINE CASE • Aluminum construction • Reinforced case prevents cracking in highstress areas for improve reliability • Machined oil scraper allows better oil scavenging; which results in lower temperatures in the flywheel cavity • Designed to fit into the stock frame • Stock deck height • Large volume sump • Accepts all OEM-style components • Can accept larger bores than stock • Includes crankcase assembly, main bearings (2), balancer shaft bearings (2), inner cam bearing, cylinder studs (8), magnetic drain plug, 1/ 4” pipe plugs (4), front and rear piston cooling jets and gaskets, and all necessary hardware, O-rings and seals for assembly • Black finish • Includes Manufacturers Statement of Origin (MSO) document • Made in the U.S.A. PART # DESCRIPTION FOR 17-23 107”/114”/117” M-EIGHT 0931-1083 Wrinkle black finish w/ highlighted cylinder fins 0931-1167 Wrinkle black finish w/o highlighted cylinder fins 0931-1168 Black granite finish w/ highlighted cylinder fins 136” BIG BORE KITS FOR M-EIGHT 107”/114”/117” ENGINES • Bolt-on kit, the largest cylinder bore possible without requiring machining of the crankcases • Takes 107”/114”/117” to 136” displacement • Must be used with S&S stroker flywheel PART #0922-0168 (sold separately) • 4.320” bore • 11:1 forged pistons • All necessary gaskets and hardware required for installation included • Includes cam cover badge • Made in the U.S.A. 0931-1083
APRIL 2024 THE DRAG SPECIALTIES dragspecialties.com 4 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 20-23 CHALLENGER 2312-1085 8” orange PART # DESCRIPTION FOR 20-23 CHALLENGER (CONT) 2312-1086 8” yellow PART # DESCRIPTION FOR 20-23 CHALLENGER (CONT) 2312-1087 8” green ICE KOLOR FLARE™ WINDSHIELDS • Wind tunnel designed and tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields • Windshields are made from acrylic and have a vibrant fluorescent edge to give your motorcycle a little extra pop • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192. PART # DESCRIPTION FOR 20-23 CHALLENGER 2312-1088 8” red 2312-1089 8” blue PART # DESCRIPTION FOR 20-23 CHALLENGER (CONT) 2312-1090 8” purple 2312-1091 8” bronze KOLOR SPORT FLARE™ WINDSHIELDS • The Kolor Sport Flare™ is streamlined and offers radical curves and a sportier stance; it complements the lines of the new fairing with a more aggressive profile and adds stability and handling with improved air management • The patented design features “hips” at the sides that re-route air away from the rider while adding downforce to the front end to improve stability and handling compared to the stock windshield design (the stock design creates lift) • The “flip” at the top of the Flare™ kicks air up and over the rider creating cleaner, less turbulent air for the rider and passenger • Wind tunnel tested and designed for maximum performance and air management • Windshields are made from acrylic • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S. And also under International Patents: 324093, 324094, 325192. 2312-1088 2312-1089 2312-1090 2312-1091 2312-1085 2312-1086 2312-1087
APRIL 2024 THE DRAG SPECIALTIES 5 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION 2330-0307 For 18-23 FXLR/FXBB/FXBBS/FXST 2330-0305 For 06-17 FXD models (except FXDWG/FLD) 2330-0306 For 96-05 FXD models (except FXDWG) PART # DESCRIPTION 2330-0308 For 83-00 FXR models 2330-0309 For 04-22 XL (except RH Sportster models) S-RT MINI FAIRINGS • Instantly recognizable style, but in a slimmer, more performance-oriented profile • Includes a clear headlight cover and an 8” tall, light-smoke tinted windscreen • Durable ABS construction comes in a gloss black finish • Each specific-fit fairing kit includes powdercoated brackets and stainless steel hardware • Bolt-on fitment without any modification PART # DESCRIPTION 2330-0304 S-RT Mini Fairing Lowers S-RT MINI FAIRING LOWERS • Improved style and wind management • Engineered as a perfect complement to S-RT mini fairings • Extend the comfort and distinct custom look of any Saddlemen S-RT mini fairing • Durable ABS construction in gloss black finish • Mounting hardware included • Sold in pairs
APRIL 2024 THE DRAG SPECIALTIES dragspecialties.com 6 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS FREEDOM TOURING SEATS • Features solar-reflective leather in the seating area and high-quality automotive-grade vinyl on the sides (unless noted) • Features a 53/ 4” tall driver support • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Seats include a lower dash extension that will be used on FLHT/FLTR applications • Includes all mounting hardware • Made in the U.S.A. PART # DESCRIPTION 0801-1508 Smooth, solar-reflective leather 0801-15031 Smooth, vinyl 0801-15041 Double diamond, black thread PART # DESCRIPTION 0801-15061 Double diamond, silver thread 0801-15071 Double diamond, red thread 1 Not solar-reflective leather. FOR 97-07 FLHT/FLHTC/FLHTCU/FLHR/FLHX/FLTR MODELS; 301/ 2” L OVERALL 15” W FRONT X 13” W REAR) 0801-1508 0801-1503 0801-1506 0801-1504 0801-1507 PART # DESCRIPTION 0801-1550 For 08-23 FLHT/FLHTCU/FLHTK/FLHTKSE/FLHX/FLHR/FLTR/ FLTRU/FLTRK/FLTRX/FLTRXS (except 23 FLHXSE/FLTRXSE) FRED KODLIN SIGNATURE SERIES SQUAREBACK™ SEAT • Designed by Fred and Len Kodlin, Europe’s famous father/son custom bike-building team • Features contrasting-color, reverse apex chevron pattern on perforated vinyl • Split-panel, gripper vinyl cover for stability and performance • Riders are positioned slightly further back compared to stock • High-rising wall allows the rider increased lower back support • Driver’s seat area measures 101/ 2” W • Carefully curated 61/ 2” wide tail section provides a stylish look and ample comfort for 2-up riding • Mustang’s proprietary controlled-density foam formula requires no break-in and retains shape and support after years of use • Marine-grade fiberglass baseplate for long lasting support and durability • Polyurethane bumpers to absorb vibration PART # DESCRIPTION 0802-1558 For 18-23 FXBB/FXBBS/FXST FRED KODLIN SIGNATURE SERIES FASTBACK™ SEAT • Designed by Fred and Len Kodlin, Europe’s famous father/son custom bike-building team • Low-cut, wide driver bucket combined with a rising tail section provides good back support for the operator • Hand-sewn Alcantara® cover features a contrasting-colored diamond stitch pattern in the front and rear center panel • Original Mustang marine-grade vinyl • Wide passenger seating area features a sleek and streamlined profile while still offering comfort for one-piece 2-up riding • Mustang’s proprietary controlled-density foam formula requires no break-in and retains shape and support years after use • Marine-grade fiberglass baseplate for long-lasting support and durability • Driver’s seat area measures 111/ 2” W • Passenger seat area measures 51/ 2” W • Polyurethane bumpers absorb vibration Dash extension
APRIL 2024 THE DRAG SPECIALTIES 7 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 08-23 FLHT/FLHR/FLHRS/FLHX/FLHXS/FLHXST/FLTRX/FLTRXS/FLTRXST (EXCEPT 23 FLHXSE/FLTRXSE) 0801-1537 Double diamond seat w/ red thread 0801-1437 Basket weave seat 0801-1438 Double diamond seat 0801-1439 Pleated seat TAILWHIP DADDY LONG LEGS SEATS • Rider’s seating area is moved 2” back over the standard Tailwhip, providing extra legroom • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for • Molded Marathon Foam • BikerTec custom cover • Highly detailed powdercoated steel carpeted base • Made in the U.S.A. 0801-1537 PART # DESCRIPTION 0801-1535 Double diamond seat w/ chestnut thread 0801-1536 Double diamond seat w/ red thread 0801-1541 Double diamond seat w/ Gripp tape PART # DESCRIPTION 0801-1314 Basket weave seat 0801-1315 Double diamond seat TAILWHIP SEATS • Take the Kickflip one step further • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for • Molded Marathon Foam • BikerTec custom cover • Highly detailed powdercoated steel carpeted base • Made in the U.S.A. FOR 08-23 FLHT/FLHR/FLHRS/FLHX/FLHXS/FLHXST/FLTRX/FLTRXS/FLTRXST MODELS (EXCEPT 23 FLHXSE/FLTRXSE) 0801-1535 0801-1536 0801-1541 PART # DESCRIPTION 1405-0362 Mirror polished PART # DESCRIPTION 1405-0364 Black ANTENNA RINGS • Made from 316L stainless steel • Replaces PVD (Physical Vapor Deposition) coating antenna rings on the rear fender • Smooth finish • Sold each FOR 17-23 FLHRXS, 15-23 FLTRX/FLTRXS, 09-23 FLHX/FLHXS AND 09-13 FLTR (LEFT REAR FENDER) 1405-0362 FOR 17-23 FLHRXS, 15-23 FLTRXS, 14-23 FLHXS, 10-13, 15-23 FLTRX, 09-23 FLHX AND 09 FLTR PART # DESCRIPTION RIGHT REAR FENDER 1405-0361 Black, smooth 1405-0367 Mirror polish w/ sugar skull 1405-0369 Black w/ sugar skull PART # DESCRIPTION LEFT REAR FENDER 1405-0360 Black, smooth 1405-0366 Mirror polish w/ sugar skull 1405-0368 Black w/ sugar skull ANTENNA COVERS • Made from 316L stainless steel • Replaces the rear fender antenna rubber grommet for a clean custom look • Sold each 1405-0367 1405-0361 1405-0364 1405-0368 0801-1437 0801-1438 0801-1439 0801-1314
APRIL 2024 THE DRAG SPECIALTIES dragspecialties.com 8 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS CUSTOM DYNAMICS Custom Dynamics continues to lead the way in LEDs and lighting accessories for American motorcycles. They offer simple to install wiring solutions for the newest American V-Twin models so you can quickly and easily upgrade your lighting without having to cut and splice the stock wiring harness. Install smarter, go brighter with Custom Dynamics! PART # DESCRIPTION 2040-3063 For 15-23 FLSTF/FLSTFB/FLSTFBS/FLFB/FLFBS, FLSTC/FLHC/FLHCS, FXSB/FXBR, 18-23 FXBB/FXBBS, FXFB/FXFBS, 18-20 FXLR, 20-23 FXLRS, 22-23 FXLRST, 22 FXRST, 20-23 FXST, 18-21 FLSB, 15-20 FLSTN/FLDE, 15-21 FLSL, 16-17 FXSE, 15 FLSTNSE, 08-13 FLHR/FLHRC and 08, 13 FLHRSE FLUSH-MOUNT MIRROR MOUNT TURN SIGNALS • Low-profile turn signals mount flush to the OEM mirror stems to sit flush with the OEM controls • Die-cast aluminum housings; measure 13/ 8” L x 9/ 16” W x 9/ 16” D • Features five dual-color LEDs with white running light and full-contrast amber turn signal light • Textured satin black finish with smoke lenses • 26 AWG wire leads measure 48” L • Equipped with IP68 rated JAE connectors for plug-in installation when used with wire adapter PART # 2050-0494 (sold separately) • Sold in pairs PART # DESCRIPTION FOR 23 FLHXSE, FLTRXSE 2030-2348 Black PART # DESCRIPTION FOR 23 FLHXSE, FLTRXSE (CONT) 2030-2349 Chrome ILLUMINATED RADIUS LICENSE PLATE FRAMES • Aluminum construction • Six bright white LEDs are flush-mounted across top of the frame for plate illumination • Plug-in connectors for quick, simple hookup with the wiring harness • Fit most standard 4” x 7” license plates • Compatible with Custom Dynamics license plate mount PART #s 2030-1959 and 2030-1960 (sold separately) • Sold each PART # DESCRIPTION 2120-1340 For 10-13 FLHX/FLTRX, 14-23 FLHT/FLHR/FLTR/FLHX models (except 23 FLHXSE/FLTRXSE) REAR FENDER WIRING HARNESS ADAPTER • Designed to plug directly into the OEM wiring harness under the seat • Works with the OEM rear wiring harness, making a rear fender/custom lighting setup easier • Color-coded wires • 6-pin Molex connectors • Compatible with OEM harness, and Custom Dynamics ProBEAM® taillight wiring harness PART #s 2050-0393 and 2120-1246 (sold separately) PART # DESCRIPTION 2010-1524 For 12-16 FLD, 18-23 FLHC/FLHCS, 18-20 FXLR, 20-23 FXLRS/ FXLRST and 22 FXRST models TAILLIGHT BASEPLATE • Durable molded ABS plastic construction • Gloss black finish with metal threaded inserts for secure mounting of a ProBEAM® or other taillight (sold separately) • Direct replacement for OEM NOs. 73381-12 and 67801288 NOTE: FXLRST and FXRST models require the OEM turn signals remove for installation. May require additional taillight wiring harness (sold separately). 2030-2348 2030-2349
APRIL 2024 THE DRAG SPECIALTIES 9 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # NO. OF LINKS 1223-1946 120 1225-0836 Repl. connecting link 530 ZXW (XW-RING) PREMIUM HIGH PERFORMANCE CHAIN • Premier-quality high-speed, extreme-heat chain • Chains include rivet connecting link • Black scale color • 530 ZXW tensile strength of 11,200 lb. and maximum CC of 1400 PART # DESCRIPTION 2112-1822 For 06 FLHT, FLHR, FLHX, FLTR (50A upgrade) 2112-1821 For 04-05 FLHT, FLHR, FLHX, FLTR (50A upgrade) 2112-1820 For 99-03 FLHT, FLHR, FLHX, FLTR (50A upgrade) 2112-1823 For 89-98 FLT/FLHT/FLHR and 89-94, 99-00 FXR 2112-1824 For 01-06 FXST, FLST 3-PHASE 50A CHARGING KITS • Kits produce 32A at 1000 rpm and 50A at 2500 rpm • Yield more charging power when upgrading from 32A or 38A • Improved durability and dependability over stock 48A system • Made in the U.S.A. PART # DESCRIPTION 2106-0617 Key start ignition switch IGNITION SWITCH • Marine-grade ignition switch • Key start (like a car) • Stainless steel knurled jam nut with a polished finish • Includes two keys and brass screws • For custom applications PART # DESCRIPTION 3807-0669 SAE to USB-C/USB adapter w/digital display SAE TO USB-C/USB ADAPTER • This high quality SAE to USB-C and USB port adapter features a switched on/off digital voltage display, allowing you to power your devices with either USB or USB-C charger cables • It comes with a cover for the USB and USB-C ports when not in use, and 2 zip tie slots (zip ties not included) on the back for securely attaching the adapter to your vehicle • Its size of 3” x 11/ 4” x 3/ 4” and protective outdoor rating makes it the ideal solution for your vehicle to charge phones or devices producing 5V at 3.1a power • Easy install to your SAE battery connector cable • Crafted from durable ABS plastic • Standard USB port • Cables and adapters sold separately 2112-1820
APRIL 2024 THE DRAG SPECIALTIES dragspecialties.com 10 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS BLACK # CHROME # END RISE OVERALL WIDTH CENTER WIDTH PULLBACK FOR SOFTAILS WITH 1¼” RISER CLAMPING AREA 0601-6307 0601-6310 11” 33.25” 5.5” 7.18” 0601-6308 0601-6311 15” 33.25” 5.5” 7.40” 0601-6309 0601-6312 17” 33” 5.5” 7.56” FOR 15-23 FLTR MODELS 0601-6313 0601-6316 11” 34.50” 5.5” 7.27” 0601-6314 0601-6317 15” 34.50” 5.5” 7.50” 0601-6315 0601-6318 17” 34.50” 5.5” 7.68” 11/ 2” SUPER FAT FLOWBAR HANDLEBARS • Unique design, engineered in Germany • Available in 11”, 15” and 17” heights • 31/ 2” on-center knurling • Slotted for internal wiring • Works with hydraulic and cable clutches, cable operated throttle and TBW applications • Accepts HD OEM heated grips • Made in the U.S.A. PART # DESCRIPTION FOR H-D MODELS WITH 31/ 2” ON-CENTER RISER MOUNTS 0602-1481 Chrome 0602-1482 Black BIG BLOCK RISER KITS • CNC-machined from billet aluminum • Designed for handlebars with 11/ 4” diameter clamping area • Risers are 11/ 2” tall • All hardware included (excluding mounting bolts) PART # DESCRIPTION FOR 18-24 M-EIGHT SOFTAIL MODELS 0615-0389 Black 0615-0390 Chrome LEVER PERCH CLAMPS • Made from CNC-machined billet aluminum • Stainless Allen head bolts included • Sold in pairs 0602-1482 0602-1481 0615-0390 0615-0389 0601-6309 0601-6312 PART # DESCRIPTION 0610-2274 For 21-23 FLHT/FLHX/FLTR/FLHR/FLRT 0610-2273 For 17-20 FLHT/FLHX/FLTR/FLHR w/ OEM hydraulic clutch 0610-2268 For 08-16 FLHT/FLHR/FLTR/FLHX (except models w/ OEM hydraulic clutch) 0610-2270 For 06-16 FLHT/FLHX/FLTR/FLHR/VRSC w/ OEM hydraulic clutch 0610-2272 For 15-22 SOFTAIL (except models w/ OEM hydraulic clutch) 0610-2267 For 96-17 Big Twin (except 15-17 Softail, 16-17 FXDLS, 08-17 FLHT/FLHR/FLTR/FLHX and FL Trike), 96-03 XL 0610-2271 For 14-22 XL (except RH Sportster) 0610-2269 For 04-13 XL ANTHEM PRO LEVER SETS • The ultimate performance lever for V-Twin motorcycles • Unbreakable spring-loaded hinge and folding lever design • Adjustable from stock length to Shorty 1.5” shorter • Micro-adjuster for precise custom ergonomics • CNC-machined from high-quality aluminum • Available in a black finish • Sold in pairs 0610-2267
APRIL 2024 THE DRAG SPECIALTIES 11 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS KODLIN UNIVERSAL FASTBACK RISERS • CNC machined from billet aluminum • Black anodized finish • Available in 6”, 8” and 10” height • 1” bar clamp size • Stainless hardware and zip ties included • Fits all Harley models with 3-1/2" on-center handlebars PART # DESCRIPTION COLOUR 0602-1458 UNIVERSAL 10" BLACK 0602-1459 UNIVERSAL 8" BLACK 0602-1460 UNIVERSAL 6" BLACK 0602-1458 0602-1459 0602-1460 KODLIN UNIVERSAL FASTBACK RISERS WITH GUAGE BUCKET • CNC machined from billet aluminum • Black anodized finish • Available in 6", 8" and 10" height • 1" bar clamp size • Stainless hardware and zip ties included • Fits 2022-2023 Lowrider S models and Harley models with 3-1/2" on-center handlebars using the Lowrider S round gauge or Koso HD-04 speedo 2211-0172 PART # DESCRIPTION COLOUR 0602-1461 10" WITH GAUGE BUCKET BLACK 0602-1462 8" WITH GAUGE BUCKET BLACK 0602-1463 6" WITH GAUGE BUCKET BLACK 2210-0670 FASTBACK GAUGE BUCKET BLACK 0602-1461 0602-1462 0602-1463 2210-0670 2210-0670 on bike KODLIN OVAL AIR CLEANER FOR HD MILWAUKEE 8 MODELS • CNC machined from billet aluminum • Chrome or Black finish • High Performance washable K&N air filter for up to 50% more airflow • Clean look with hidden bolts design • Fits 2017-2024 M8 Touring (except CVO) and 20182024 M8 Softail models PART # DESCRIPTION COLOUR 1010-3199 OVAL AIR CLEANER MILWAUKEE 8 CHROME 1010-3198 OVAL AIR CLEANER MILWAUKEE 8 BLACK 1010-3198 1010-3199
APRIL 2024 THE DRAG SPECIALTIES dragspecialties.com 12 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS CHROME GLOSS BLACK END RISE WIDTH CENTER WIDTH PULLBACK FOR 23 FLHXSE (1” DIAMETER CLAMPING AREA) 0601-6331 0601-6332 10” 36” 151/ 2” 9” 0601-6333 0601-6334 11” 36” 151/ 2” 9” 0601-6335 0601-6336 12” 36” 151/ 2” 9” 11/ 4” EZ INSTALL FLAT TOP HANDLEBARS • Revolutionary interlocking bolt-together two-piece handlebar design that takes up half the shelf space, is economical to ship and even faster to install • CNC mandrel-bent from 11/ 4” diameter x .120” wall heavy tube • EZ Install - no more need to fight internal wiring; with our handlebars you can install wiring in minutes • Bars are knurled and notched for TBW applications 0601-6331 0601-6336 CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 20-23 FXLRS, 22-23 FXLRST (11/ 4” DIAMETER CLAMPING AREA) 0601-6328 0601-6329 8” 32” 10” 9” FOR 23 FLHXSE (1” DIAMETER CLAMPING AREA) 0601-6368 0601-6369 14” 36” 151/ 2” 9” 11/ 4” EZ INSTALL ROUND TOP HANDLEBARS • Revolutionary interlocking bolt-together two-piece handlebar design that takes up half the shelf space, is economical to ship and even faster to install • CNC mandrel-bent from 11/ 4” diameter x .120” wall heavy tube • EZ Install - no more need to fight internal wiring; with our handlebars you can install wiring in minutes 0601-6368 0601-6329 PART # DESCRIPTION 0602-1469 6” straight riser set 0602-1472 9.5” straight riser set PART # DESCRIPTION 0602-1473 12” straight riser set 0602-1471 9.5” pull back riser set CHUBBY® BILLET RISERS • Precision-machined from billet aluminum • Drilled and tapped for standard 1/ 2” x 13 mounting bolts • Uses stock top clamp, aftermarket top clamp, or Wild 1 custom billet top clamps (with offset mounting holes) • Gloss black finish • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION 0602-1475 Gloss black SMOOTH HANDLEBAR TOP CLAMP • Precision-machined from billet aluminum • Works with 31/ 2” on-center risers with offset mounting holes and all 1” handlebars, as well as Wild 1 Chubby Risers, and Wild 1 Chubby Bars • Hidden mounting hardware included • Made in the U.S.A. 0602-1473 0602-1471 0602-1469 • Made in the U.S.A. NOTE: Accept OEM heated grips. NOTE: U.S. Patent No. 10,946,926. • Bars are knurled and notched for TBW applications • Made in the U.S.A. NOTE: Accept OEM heated grips. NOTE: U.S. Patent No. 10,946,926. PART # DESCRIPTION 0602-1474 For FXSTS, FLSTS models w/ 1” dia. handlebars CHUBBY® BILLET 2” SPRINGER RISER KIT • Precision-machined from billet aluminum in satin black finish • Works with any standard 1” handlebar and Wild 1 Chubby Bars • Includes two risers
APRIL 2024 THE DRAG SPECIALTIES 13 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION 1130-08361 For 21-23 FLHT/FLHR/FLHX/FLTR models w/ mechanical clutch 1130-08371 For 17-20 FLHT/FLHR/FLHX/FLTR models w/ hydraulic clutch 1 Comes assembled with bearing included. SCORPION LOW-PROFILE LOCK-UP CLUTCHES • Features an all-new, redesigned billet aluminum lock-up pressure plate designed to fit under the stock primary cover • No need to change or modify your cover • Surface area is greatly increased and lever effort is kept to a minimum • Three different coil spring sets included to provide a wide variety of spring pressure options, allowing you to tune the clutch for stock to 200+ HP applications • Scorpion clutch basket and a steel inner hub is also included to complete the unit 1130-0836 DESCRIPTION SCORPION CLUTCH REPL. CLUTCH PLATE SET BIG TWIN APPLICATIONS For 21-23 FLHT/FLHX/FLHR/FLTRX and 18-23 Softail models w/ mechanical clutch 1130-08341 - For 17-20 FLHT/FLHX/FLHR/FLTRX w/ hydraulic clutch 1130-08351 1131-3903 1 Comes assembled with bearing included. SCORPION BILLET CLUTCHES • CNC-machined billet aluminum design features over twice the friction area of the stock clutch • Provides positive engagement and release • Incorporates six heavy-duty coil springs instead of the diaphragm spring; includes an extra heavy-duty set of springs for higher horsepower applications • Friction plates are compatible with most primary oil • Simple bolt-on installation • Kits include clutch basket, clutch hub, drive plates, driven plates, two sets of clutch springs, pressure plate and necessary hardware • Made in the U.S.A. 1130-0834 1131-3903 PART # DESCRIPTION 1131-3901 For 13-20 FLHT/FLHR/FLHX/FLTR models w/ hydraulic slipper/assist clutch SCORPION LOW-PROFILE LOCK-UP PRESSURE PLATE • Progressive pressure as rpms increase • One-piece, no-flex billet aluminum pressure plate • Hard anodized for optimal durability • Multiple spring sets for optimal tuning • Fits under stock primary cover • Easy bolt-on installation • Works great with stock clutch • Made in the U.S.A. • Billet aluminum pressure plate • Adjustable pressure arms increase spring pressure as rpm increase • Can be run wet or dry • Smooth, precise shifting • Made in the U.S.A.
APRIL 2024 THE DRAG SPECIALTIES dragspecialties.com 14 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION 0652-2939 For 21-23 RA1250/S PART # DESCRIPTION 0652-2940 For 22-23 RH975/S HIGH-EFFICIENCY BLACK VINYL CLUTCH CABLES • Barnett cables are smooth-working, long-lasting and are made with the finest components available, making them virtually indestructible • Available in easy-pull high-efficiency design in standard diameters • High-efficiency clutch cables reduce lever effort by up to 40% • Classic black vinyl cables feature a black vinyl casing with chrome elbows and hardware • Available in OE length • Made in the U.S.A. 0652-2939 DESCRIPTION STYLE PART # FRONT BRAKE ROTORS For 08-13 FLHT/FLHX/FLTR, 08-16 FLHR, 15-17 Softail, 06-17 Dyna Glide, 14-18 XL 11.8”, full-floating w/ red carrier 1710-4563 11.8”, full-floating w/ orange carrier 1710-4564 For all 00-17 Big Twin, 00-10 XL models (except V-Rod, 08-17 FLHT/FLHR/FLHX/FLTR and H-D FL Trike) 11.5”, full-floating w/ red carrier 1710-4559 11.5”, full-floating w/ orange carrier 1710-4560 REAR BRAKE ROTORS For 08-19 FLHT/FLHR/FLTR/FLHX 11.8”, full-floating w/ gold carrier 1710-4565 11.8”, full-floating w/ red carrier 1710-4566 11.8”, full-floating w/ orange center 1710-4567 For all 00-17 Big Twin, 00-10 XL models (except V-Rod , 08-17 FLHT/FLHR/FLHX/FLTR and H-D FL Trike) 11.5”, full-floating w/ red carrier 1710-4561 11.5”, full-floating w/ orange carrier 1710-4562 WAVE® BRAKE ROTORS • Made from 420 high-carbon stainless Tier-1 steel • Laser-cut, never stamped • Each rotor is individually heat-treated and double-disc parallel ground to ensure perfect flatness •WAVE® design allows for lower operating temperatures at extreme conditions •WAVE® design is much lighter than a stock rotor NOTE: For maximum braking performance and rotor longevity, Galfer recommends using Galfer brake pads with Galfer rotors. See page 1530 of the 2024 FatBook for Galfer brake pads. 1710-4563 1710-4565 1710-4567 PART # DESCRIPTION 1131-3911 For all 17-23 M-Eight models and 09-17 Twin Cam CVOs w/ slipper clutch POWER PLATE KIT • Designed for high output M-Eight engines • Race engineered and race track proven • Precision machined billet gold aluminum power plate with high performance black springs and chrome 12-point hardware • Eliminates clutch slippage • Cost effective solution when upgrading the clutch • Increases clutch holding pressure by 50 percent • Easy ten minute install • Proven to hold 220 HP • Looks amazing when paired with Trask Derby cover (see page 875 of the 2024 Drag Specialties FatBook) PART # DESCRIPTION 0414-0744 For 17-23 FLHT/FLHX/FLHR/FLTRU/FLTRK/FLTRX 0414-0743 For 14-16 FLHT/FLHX/FLHR/FLTRU/FLTRK/FLTRX 0414-0745 For 02-13 FLHT/FLHX/FLHR/FLTRU/FLTRK/FLTRX MONOTUBE CARTRIDGE FORK KITS • Replaces all OEM fork internals • 2” over stock ride height without changing fork tubes • Frequency sensing technology (FST) damper • Improved resistance to brake dive • Improved front end stability and cornering • Improved bottoming control 0414-0745
APRIL 2024 THE DRAG SPECIALTIES 15 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION 0504-0430 For 08-17 Softails models (except FXCW/C, FXSB/SE and FXSE); repl. OEM #29200008A FRAME MOUNTED HEAT DEFLECTORS • Direct heat away from rider to improve comfort on hot summer rides • Mount to frame just under the front of the seat • Tough black plastic construction • Easy to install • Include mounting hardware • Sold in pairs PART # DESCRIPTION 1120-0444 For 11-23 Touring models, 12-23 Softails, 09-23 HD Trikes, 12-17 FXD/FXDWG/FLD; repl. OEM #83936-09A COMPENSATOR SPRING PACK • High-quality OEM replacement component • Can also be used as a replacement for the spring pack found in Drag Specialties High Performance compensator sprocket kit PART #1120-0404 PART # DESCRIPTION 1501-0788 Detachable latch kit DETACHABLE LATCH KIT • Fits all models equipped with detachable sideplates, one-piece sissy bar, racks and Tour Pak® luggage mounting racks (except 18-later Softail models with Holdfast racks and uprights) • Satin black finish • Easy to install with included hardware • Sold in pairs REPLACEMENT LACED WHEELS • 40-spoke tube-type wheels feature chrome or gloss black powdercoat steel rims, chrome spokes and chrome or gloss black powdercoat steel hubs • Fully assembled and trued with bearings installed and end play set • Available for most applications • Uses OEM mounting hardware; designed to use OEMstyle rotors, pulleys and sprockets GLOSS BLACK PART # DESCRIPTION VALVE STEM STYLE FRONT WHEELS 0203-0668 21” x 2.15” for 00-03 FXD/B/C/L, 00-05 XL (single/dual disc); repl, OEM #43557-00, 43557-00A CMV PART # DESCRIPTION VALVE STEM STYLE FRONT WHEELS (CONT) 0203-0669 21” x 2.5” for 99 FXD, 86-99 XL (single or dual disc); repl OEM #43557-87 CMV
APRIL 2024 THE DRAG SPECIALTIES dragspecialties.com 16 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION 1603-0397 Black PART # DESCRIPTION 1603-0398 Chrome P-54 SHIFTER PEGS • Billet 6061 aircraft-grade aluminum • Comes with one 5/ 16”-24 x 7/ 8” SCHS • Fits all HD models and Thrashin billet shift levers • Triple nickel-plated chrome or black anodized finish • Made in the U.S.A. NOTE: Shifter peg can also be used as a brake pedal on Thrashin Softail billet brake arm; PART #s 1610-0696 and 1610-0697. Not compatible with Thrashin adjustable bagger brake arm. PART # DESCRIPTION 1603-0394 Black PART # DESCRIPTION 1603-0395 Chrome SPEEDWAY BILLET SHIFTER PEGS • Billet 6061 aircraft-grade aluminum • Comes with one 5/ 16”-24 x 7/ 8” SCHS • Fits all HD models and Thrashin billet shift levers • Triple nickel-plated chrome or black anodized finish • Made in the U.S.A. NOTE: Shifter peg can also be used as a brake pedal on Thrashin Softail billet brake arm; PART #s 1610-0696 and 1610-0697. Not compatible with Thrashin adjustable bagger brake arm. PART # DESCRIPTION 1603-0399 TSC shifter peg TSC SHIFTER PEG • 6061 aircraft-grade aluminum • Includes ARP® fastener (made to Thrashin’s exact specifications) • Fits all HD models and Thrashin billet shift levers • Triple nickel-plated chrome finish • Made in the U.S.A. NOTE: Shifter peg can also be used as a brake pedal on Thrashin Softail billet brake arm; PART #s 1610-0696 and 1610-0697. Not compatible with Thrashin adjustable bagger brake arm. 1603-0394 1603-0395 1603-0398 1603-0397 FORK GUARD COVERS • Lightweight Performance Bagger fork guards inspired from the racetrack • Replace factory fork boots while still protecting inner fork tubes and seals • Universal design works with factory and aftermarket front ends (direct bolt-on installation) • CNC machined from 6061 billet aluminum • Includes a set of fork dust seals PART # DESCRIPTION 0403-0164 Chrome 0403-0163 Black 0403-0163 0403-0164
RkJQdWJsaXNoZXIy NDI5NTY=