DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES,INCLUDING CALIFORNIA.PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE“COMPETITION USE”ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS BASSANI EXHAUST Bassani Xhaust has been a leader in performance exhaust since founder Darryl Bassani started the company in 1969. The systems he engineered and built quickly gained Darryl a reputation as one of the top designers and manufacturers of quality high-performance exhaust systems for motorcycles. Darryl made sure his exhaust system designs made the most power possible. He also made sure his exhaust looked as good as it performed. A Bassani Xhaust is well-designed and the fit and finish sets a standard within the industry for beauty. His systems also have a strong, distinctive exhaust note. Drag Specialties is proud to be a continuing partner with Bassani Xhaust. This month we are featuring the Road Rage exhaust line, now available for the latest M-Eight Softail models. Give your bike a piece of performance art – bolt on a Bassani Xhaust system. PART # DESCRIPTION EMIS* FOR 18-23 FXBB/FXBBS, FXLR/FXLRS, FLFB/FLFBS, FLSL 1800-2675 Black 2 1800-2676 Stainless steel 2 1800-2677 Chrome 2 PART # DESCRIPTION EMIS* FOR 18-23 FXRST, FLXRST, FLSB 1800-2678 Chrome 2 1800-2679 Black 2 1800-2680 Stainless steel 2 ROAD RAGE III 2-INTO-1 EXHAUST SYSTEMS • 2-into-1 stepped equal-length headers 13/ 4” to 17/ 8” designed for maximum performance • Utilizes an advanced inner collector for maximum performance • High-flow catalytic converters • 18mm O2 ports with 12mm adapters and plugs included • Megaphone-style muffler and brushed billet end cap • Made in the U.S.A. NOTE: Designed to fit with stock OEM cam cover only. 1800-2675 1800-2678 1800-2676 THE DRAG SPECIALTIES MAY 2024 dragspecialties.com
MAY 2024 THE DRAG SPECIALTIES dragspecialties.com 2 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS FOR 19-23 CHALLENGER PART # DESCRIPTION EMIS* 50-STATE 1810-31751 Brushed stainless steel 1 1810-31771 Guardian black 1 PART # DESCRIPTION EMIS* RACE ONLY 1810-3174 Brushed stainless steel 3 1810-3176 Guardian black 3 1 Exempt per CARB Executive Order (E.O.) #K-010-37 for all 20-23 Indian Challenger models. QUALIFIER 2-INTO-1 EXHAUST SYSTEMS • Inspired by the S&S King Of The Baggers racing efforts • Stainless steel stepped header design to maximize power output • Full-length heat shields on front and rear header pipes • Race-inspired S&S end cap • Saddlebag supports included • Made in the U.S.A. PART # DESCRIPTION 1861-1732 For 19-23 Challenger models SADDLEBAG MOUNTS FOR 2-INTO-1 EXHAUST • Required when running a 2-into-1 exhaust • Kit includes saddlebag brackets and all necessary mounts/hardware for installation PART # DESCRIPTION 3550-0438 For 17-23 FXLRST SADDLEBAG STABILIZER KIT • CNC-machined from 6061-T6 aluminum and hard anodized black for superior durability • Creates a direct link between both bags and significantly strengthens the system, reducing the unwanted movement of the bags • Included thumbscrews allow for easy assembly and disassembly of the kit FOR ALL H-D MODELS WITH DOCKING HARDWARE PART # DESCRIPTION SHORT (25.2MM X 30MM) 3550-0431 Mirror polished w/ sugar skull 3550-0432 Black w/ sugar skull PART # DESCRIPTION MEDIUM (27MM X 30MM) 3550-0433 Mirror polished w/ sugar skull 3550-0434 Black w/ sugar skull PART # DESCRIPTION LONG (25.2MM X 45MM) 3550-0435 Mirror polished w/ sugar skull 3550-0436 Black w/ sugar skull DOCKING COVERS • Hide the rear docking hardware when you are not using it • Made from 316F stainless steel with neodymium magnets for a solid hold • Sold in pairs 3550-0434 3550-0435 1810-3176 1810-3175 3550-0431
MAY 2024 THE DRAG SPECIALTIES 3 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION 2310-0831 For 22-23 FXLRST models FLARE™ WINDSHIELD • Wind tunnel designed and tested, the “hips” provide added downforce for stability while the “flip” at the tip directs air up and over the rider to help eliminate swirling and buffeting • Made from unmatched durability Lexan® polycarbonate with FMR hard coating on both sides of the windshield • Available in 8” dark smoke color with vent • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S And also under International Patents: 324093, 324094, 325192. PART # DESCRIPTION FOR 22-23 FXLRST MODELS 2310-0832 6” red 2310-0833 6” orange 2310-0834 6” yellow 2310-0835 6” green 2310-0836 6” blue PART # DESCRIPTION FOR 22-23 FXLRST MODELS (CONT) 2310-0837 6” purple 2310-0838 6” bronze 2310-0839 8” red 2310-0840 8” orange 2310-0841 8” yellow PART # DESCRIPTION FOR 22-23 FXLRST MODELS (CONT) 2310-0842 8” green 2310-0843 8” blue 2310-0844 8” purple 2310-0845 8” bronze KOLOR FLARE™ WINDSHIELDS • The Kolor Flare™ is streamlined and offers radical curves and a sportier stance; it complements the lines of the new fairing with a more aggressive profile and adds stability and handling with improved air management • The patented design features “hips” at the sides that reroute air away from the rider while adding downforce to the front end to improve stability and handling compared to the stock windshield design (the stock design creates lift) • The “flip” at the top of the Flare™ kicks air up and over the rider creating cleaner, less turbulent air for the rider and passenger • Wind tunnel tested and designed for maximum performance and air management • Windshields are made from acrylic • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S And also under International Patents: 324093, 324094, 325192. 2310-0844 2310-0832 2310-0834 2310-0836 2310-0840 2310-0842 2310-0838
MAY 2024 THE DRAG SPECIALTIES dragspecialties.com 4 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 18-24 FXLR/FXLRS/FXLRST/FLSB 0802-1551 Double diamond seat KICKFLIP UPFRONT SEATS • The world is your playground…shred it! • The seat that every freestyler would be stoked to own • Up Front seat moves the driver 2” closer to the handlebars • Top-grade, black vinyl cover • Baseplate is powdercoated steel and carpeted to protect painted surfaces • Featuring Le Pera’s Marathon Foam for maximum stability and comfort • Handcrafted with Le Pera’s iconic attention to detail • Made in the U.S.A. 0802-1551 PART # DESCRIPTION FOR 18-21 FLDE/FLHC/FLHCS 0802-1078 Front w/ driver backrest, black, Vintage; 12.5” W 0802-1192 Front w/ driver backrest, black, Diamond stitch; 12.5” W FOR 18-21 FLSB/FXLR/FXLRS 0802-1203 Front w/ driver backrest, black, Diamond stitch; 14” W 0802-1204 Front, black, Diamond stitch; 14” W 0802-1205 Rear, black, Diamond stitch; 14” W FOR 18-21 FLSL 0802-1117 Front w/ driver backrest, black, Vintage; 13” W 0802-1207 Front, black, Diamond stitch; 13” W PART # DESCRIPTION FOR 18-21 FLSL (CONT) 0802-1252 Front, brown, Diamond stitch; 13” W FOR 18-21 FXBB/FXBBS 0802-1241 Rear, brown, Diamond stitch; 13” W FOR 18-21 FXFB/FXFBS 0802-1080 Front w/ driver backrest, black, Vintage; 12.5” W FOR 11-13 FXS, 12-17 FLS 0802-0767 Front, black, Vintage, 13” W 0802-0769 Front, black, Diamond stitch, 13” W 0802-0770 Rear, black, Diamond stitch, 9.5” W WIDE TRIPPER™ SOLO FRONT AND REAR SEATS • Seat design lets you ride low and still be comfortable • Cut narrow at nose for better ground reach • Detailed stitch work in the highly durable, synthetic glove leather cover • Fully adjustable driver backrest is easily removable without tools • Marine-grade fiberglass baseplate • Matching rear seat sold separately • Made in the U.S.A. 0802-1241 0802-1078 0802-1252 0802-0769 0802-0770
MAY 2024 THE DRAG SPECIALTIES 5 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS CHROME GLOSS BLACK END RISE WIDTH CENTER WIDTH PULLBACK FOR 23-24 FLHXSE, 24 FLHX (1” DIAMETER CLAMPING AREA) 0601-6337 0601-6338 14” 36” 151/ 2” 9” 0601-6339 0601-6340 16” 36” 151/ 2” 9” FOR 23-24 FLTRXSE, 24 FLTRX (11/ 4” DIAMETER CLAMPING AREA) 0601-6341 0601-6342 12” 35” 101/ 4” 8” 0601-6343 0601-6344 14” 35” 101/ 4” 8” 0601-6345 0601-6346 16” 35” 101/ 4” 8” 11/ 4” EZ INSTALL FLAT TOP HANDLEBARS • Revolutionary interlocking bolt-together two-piece handlebar design that takes up half the shelf space, is economical to ship and even faster to install • CNC mandrel-bent from 11/ 4” diameter x .120” wall heavy tube • EZ Install - no more need to fight internal wiring; with our handlebars you can install wiring in minutes • Bars are knurled and notched for TBW applications 0601-6346 0601-6337 CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 23-24 FLHXSE, 24 FLHX (1” DIAMETER CLAMPING AREA) 0601-6347 0601-6348 10” 36” 151/ 2” 9” 11/ 4” EZ INSTALL POINTED TOP HANDLEBARS • Revolutionary interlocking bolt-together two-piece handlebar design that takes up half the shelf space, is economical to ship and even faster to install • CNC mandrel-bent from 11/ 4” diameter x .120” wall heavy tube • EZ Install - no more need to fight internal wiring; with our handlebars you can install wiring in minutes • Feature a billet machined top with a large internal machined radius that allows for EZ pulling of wiring (non-welded top corner) • Bars are knurled and notched for TBW applications • Made in the U.S.A. NOTE: Accept OEM heated grips. NOTE: U.S. Patent No. 10,946,926. PART # DESCRIPTION 1623-0601 +3” EXTENDED FOOT CONTROL KIT, BLACK 1623-0602 +3” EXTENDED FOOT CONTROL KIT, CHROME +3” EXTENDED FOOT CONTROL KIT • Extended reach foot control kit moves both the floorboards & foot control position 3" forward for taller riders • Each kit includes: Solo Shift Arm, Brake Arm, Inner Shift Lever, Shift Rod & Brackets • Bars with “squared” lower bends also have additional slots to ease wire routing • Made in the U.S.A. NOTE: Accept OEM heated grips. NOTE: U.S. Patent No. 10,946,926. 0601-6347 • Included floorboard brackets at Arlen Ness floorboards only & move driver boards 3” forward • All components are CNC machined from billet aluminum • Finish: Black Anodize & Chrome • Fitment: 08-up FLT & 00-07 FLT (00-07 require use of 420-027 brake arm adapte 410-037 410-036
MAY 2024 THE DRAG SPECIALTIES dragspecialties.com 6 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS BAKER DRIVETRAIN Baker Drivetrain is committed to developing the very finest drivetrain products for American Big Twin motorcycles. The new Cruise Drive Smooth Shift Kits are a bolt-on upgrade that give super-smooth and precise gearshifts. The kits come complete with everything needed for installation. Experience the Baker Drivetrain difference your next ride! PART # DESCRIPTION 1110-0117 For 17-23 Touring (except 23 FLHXSE/FLTRXSE), 18-23 Softail 1110-01191 For 17-23 Touring (except 23 FLHXSE/FLTRXSE), 18-23 Softail 1110-0116 For 07-16 Touring, 07-17 Softail, 06-17 Dyna 1110-01181 For 07-16 Touring, 07-17 Softail, 06-17 Dyna 1 N1 shift pattern. CRUISE DRIVE SMOOTH SHIFT KITS • Applied the design principles that made our six-speed overdrive shift so smooth, to create a shift drum/pillow block kit that will bolt onto any cruise drive 6-speed and give super smooth and precise shifting • Included pillow block is machined from our 6061-T6 extrusion stock for a significant increase in strength over stock • Redundant neutral feature and improved ratchet pawl geometry assist the rider in finding neutral the first time • Smoother, positive shifting is achieved with advanced geometry in the fork pin groves, and the integration of a linear detent bearing on the right side mounting plate • Fixed spindle drum design offers lower friction as the drum rotates, reducing the effort required by the rider to complete a shift • Available in standard or N1 shift pattern (as noted) • N1 shift pattern has a 0-down all-up shift pattern and eliminates any possibility of catching neutral on aggressive 1-2 shifts - neutral is below 1st gear • Easy Installation – no need to disassemble the stock gearset from the bearing door; just pull out the stock gearset, and swap out the stock shift drum for the Baker smooth shift kit drum • No adjustments are needed for the shift drum; direct bolt in design • Reuses stock shifter pawl, stock pawl centering pin, shift forks and fork rods • Precision-machined spindle and drum for the most durable shift drum • Gaskets and fasteners included • Made in the U.S.A. PART # DESCRIPTION 2101-0463 For 17-23 M-Eight Touring models TWO-STAGE REV LIMITER • Two independent rev limiters • One for engine launch, one for engine high side over-rev protection • Creates a smoother rev limiter than OEM • Launch limiter is adjustable from 2500-6250 rpm • High side limiter is adjustable from 5500-9250 rpm • Holds launch limit at +/- 50 rpm for precise limiting • Direct plug-in connection at the ignition coil 1110-0119 1110-0116
MAY 2024 THE DRAG SPECIALTIES 7 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 84-17 BIG TWIN AND 86-03 XL (EXCEPT DRESSERS AND DYNA GLIDES) 0401-0118 Chrome PART # DESCRIPTION FOR 84-17 BIG TWIN AND 86-03 XL (EXCEPT DRESSERS AND DYNA GLIDES) (CONT) 0401-0119 Black +6” CUSTOM SPRINGER FORKS • Economical alternative to a shock dampened-type Springer • Fully assembled with an in-line top bracket without a built-in rake • These +6” length Springers measure 37” from top bearing to the axle • 1” OD steering stem designed for Timken® type bearings • Both rear legs are threaded for right or left brakes • The 3/ 4” OD axle kit includes a brake mount pivot with thrust washer and hub spacers (custom spacers may be required depending on the wheel used) • Measures 91/ 4” between Rockers • Riser mounts are on 43/ 4” centers and threaded 1/ 2”-20 • Requires wheel compatible with 3/ 4” OD axle • These Springers are measured from the bottom of the top tree to the center of the axle NOTE: Do not accept spotlight bars; no fender mounts. 0401-0119 0401-0118 PART # DESCRIPTION FOR 14-23 FLHT/FLHR/FLTR/FLHX (EXCEPT 23 FLHXSE/FLTRXSE) 1313-0245 Black PART # DESCRIPTION FOR 14-23 FLHT/FLHR/FLTR/FLHX (EXCEPT 23 FLHXSE/FLTRXSE) (CONT) 1313-0246 Clear REVO ARC REMOTE RESERVOIR EXTERNAL MOUNTS • Mount kit positions remote reservoirs more rearward for a custom look and easy access to compression adjusters • Compatible on all 2014-2023 FL Touring models equipped with solid mount tour pack or H-D quick-release docking hardware • CNC-machined, anodized billet aluminum components with stainless steel hardware for long-lasting durable finishes • Built-in hose guide minimizes additional hardware for a clean mounting solution • Simple installation • Sold in pairs • Made in the USA NOTE: Not compatible on 2023 CVO FLHXSE and CVO FLTRXSE models. 1313-0246 1313-0245 PART # DESCRIPTION FOR 17-23 FLHT/FLHR/FLHX/FLTR MODELS 0414-07601 21” wheel 0414-07611 23” wheel PART # DESCRIPTION FOR 14-16 FLHT/FLHR/FLHX/FLTR MODELS 0414-07582 21” wheel 0414-07592 23” wheel PART # DESCRIPTION FOR 97-13 FLHT/FLHR/FLHX/FLTR MODELS 0414-07563 21” wheel 0414-07573 23” wheel AXEO TRAVEL LIMITING KITS • Designed specifically for use with 21”/23” AXEO Performance Cartridge kits • Prevents front fender from contacting the lower triple clamp or fairing at full bottom-out • Kit includes two 1” travel limiters • Compatible with Axeo Performance Cartridge Kits only • Made in the USA 0414-0756 1 Only compatible with Axeo Performance Cartridge Kit PART #0414-0747. 2 Only compatible with Axeo Performance Cartridge Kit PART #0414-0746. 3 Only compatible with Axeo Performance Cartridge Kit PART #0414-0748.
MAY 2024 THE DRAG SPECIALTIES dragspecialties.com 8 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS BARNETT Charlie Barnett started making and selling clutches and control cables out of a small storefront in Hunting Park, California in 1948. This year the company he founded is celebrating 75 years in the industry, and is still a leader in clutch component upgrades for your V-Twin motorcycle. Every product Barnett makes is designed and manufactured in the U.S.A. using top-quality materials to ensure a no-compromises quality product for your bike. PART # DESCRIPTION 1130-0682 For 21-23 FLHT/FLHR/FLHX/FLTR models SCORPION LOW-PROFILE LOCK-UP CLUTCH • Features an all-new, redesigned billet aluminum lock-up pressure plate designed to fit under the stock primary cover • No need to change or modify your cover • Surface area is greatly increased and lever effort is kept to a minimum • Three different coil spring sets included to provide a wide variety of spring pressure options, allowing you to tune the clutch for stock to 200+ HP applications • A steel inner hub with bearing is also included to complete the unit • Billet aluminum pressure plate • Adjustable pressure arms increase spring pressure as rpm increase PART # DESCRIPTION 1131-3902 For 13-23 FLHT/FLHR/FLHX/FLTR models models w/ cable-actuated slipper/assist clutch SCORPION LOW-PROFILE LOCK-UP PRESSURE PLATE • Progressive pressure as rpms increase • One-piece, no-flex billet aluminum pressure plate • Hard anodized for optimal durability • Multiple spring sets for optimal tuning • Fits under stock primary cover • Easy bolt-on installation • Works great with stock clutch • Made in the U.S.A. • Can be run wet or dry • Smooth, precise shifting • Comes assembled with bearing included • Made in the U.S.A. NOTE: Derby cover spacer PART #1107-0632 is required. The spacer plate is NOT required if using Barnett derby cover PART #s 1107-0540 or 1107-0541.
MAY 2024 THE DRAG SPECIALTIES 9 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION 1131-3910 For 23 Challenger/Chief/Chieftain models EXTRA PLATE CLUTCH KIT • Kit includes 12 aramid friction plates, 11 steel plates and a set of three heavy-duty springs • Adds 11% to clutch capacity • Made in the U.S.A. PART # DESCRIPTION 1131-3909 For 23 Challenger/Chief/Chieftain models CLUTCH PLATE KIT • Kit features 11 aramid friction plates,10 tempered steel plates and three heavy-duty springs • Direct replacement for stock clutch plates –- retains OE cushions/seats • Made in the U.S.A. PART # DESCRIPTION 1120-0447 For 01-06 FLHT/FLHR/FLHX/FLTR/FXST/FLST, 01-05 FXD/FXDWG 1120-0448 For 84-00 FLHT/FLHR/FLTR, 84-00 FXST/FLST, 91-00 FXD/FXDWG 1120-0446 For 91-03 XL PRIMARY CHAIN AUTO ADJUSTER KITS • Used for updating an old adjuster system or when building a new bike from the ground up • Kits include adjuster plate, bolts, shoe, brackets and hardware OEM STYLE PART # DESCRIPTION FOR 08-23 FLHR, 15-23 FLRT, 08-17 SOFTAIL, 09-17 FXDB/FXDC/FXDL/FXDF AND 10-17 FXDWG 2212-0888 Chrome; repl. OEM # 75241-08 FOR 01-07 FLHR, 01-07 FXST/FLST, 01-08 FXDB/FXDC/FXDL/FXDWG 2212-0890 Chrome; repl. OEM # 750530-01B LED STYLE PART # DESCRIPTION FOR 08-23 FLHR, 15-23 FLRT, 08-17 SOFTAIL, 09-17 FXDB/FXDC/FXDL/FXDF AND 10-17 FXDWG 2212-0884 Chrome 2212-0885 Black FOR 01-07 FLHR, 01-07 FXST/FLST, 01-08 FXDB/FXDC/FXDL/FXDWG 2212-0886 Chrome 2212-0887 Black FUEL GAUGES • LED or OEM-style gauge available • Black or chrome finish • Sold each 2212-0885 2212-0886 2212-0888 1120-0448 1120-0446 1120-0447
MAY 2024 THE DRAG SPECIALTIES dragspecialties.com 10 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 14-23 FLHTCUTG MODELS 2010-1520 Chrome PART # DESCRIPTION FOR 14-23 FLHTCUTG MODELS (CONT) 2010-1521 Black CALADE TAILLIGHTS • Inspired by the classic finned taillight look • 52 red LEDS for run, turn and brake lights • 12 white LEDs for reverse lights • Feature a main red lens with a clear reverse lens • Install with pre-applied 3M VHB adhesive • Plug-and-play installation • Available with chrome or black housings • Sold in pairs FOR 18-23 SOFTAIL MODELS W/ OEM HARD SADDLEBAGS PART # DESCRIPTION W/ LIGHTNING BOLTS 2020-2173 Brass 2020-2174 Chrome 2020-2175 Silver PART # DESCRIPTION W/ THUNDER BOLTS 2020-2176 Black 2020-2177 Brass 2020-2178 Chrome BAG BOLTS TAILLIGHT KITS • Multi-function LEDs serve as running, brake and turn indicator lights • Self-contained housings with integrated load equalizers for a clean custom look • Customizer’s dream, horizontal or vertical mount on any flat surface • Each kit comes with either red/red Lightning Bolts or red/amber Thunder Bolts • Available with black, brass, chrome, or silver finish • Kits include four LED lights, shrink wrap, connectors and all necessary wiring for easy installation PART # DESCRIPTION 2020-2171 Brass 2020-2172 Chrome THUNDER BOLT TAILLIGHTS • Radical custom, flush-mounted look • Rugged 6061-T6 billet aluminum bodies with black anodized finish • Switchback technology allows for multi-function as running light, brake light, and/or turn signals • Can be mounted anywhere you can drill a 16mm (0,625”) hole • Self contained unit with built-in load equalizer • Available in brass or chrome finish • Waterproof • Sold in pairs 2020-2171 2020-2172 2020-2174 2020-2175 2020-2176 2010-1520 2010-1521 2020-2173
MAY 2024 THE DRAG SPECIALTIES 11 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION 2001-2790 For 15-23 FLTRX/FLTRXS, 16-19 FLTRU, 18-22 FLTRXSE, 20-24 FLTRK, 22-23 FLTRXST and 23-24 FLTRT SHARK DEMON HEADLIGHTS • High-performance LED headlights with side-facing position lights to further increase viewing angle and width of the beam pattern • Low beam has six projection LEDs and eight directreflective LEDs; 11314 raw/5554 effective lumens • High beam has 22 direct-reflective LEDs; 22274 raw/8634 effective lumens • 5500-6000K daytime color temperature • Durable polycarbonate clear lens • Aluminum housing with a gloss black finish • Mounting hardware included; mount brackets are 3mm thick 304 stainless steel • Waterproof IP67 ingress rating • Direct plug-in wiring harness • DOT compliant • Engineered in the U.S.A. PART # DESCRIPTION 2050-0506 For 23 FLHXSE, FLTRXSE MAGIC STROBES BRAKE LIGHT MODULE • Has 10 user-selectable flash/strobe patterns • Overcurrent protection • Thermal protection • Built-in short circuit protection • Reverse wiring protection • 84 watts max power rating, 12VDC • Sealed, weathertight case PART # DESCRIPTION 0214-2817 For 20-23 FLHT/FLHR/FLHX/FLTR with OEM axle #43000207 STAINLESS STEEL AXLE ADJUSTER KIT • Allows for utilization of full slot width in the swingarm • Designed for use with the stock axle • Works great with chain conversion kits (PART #s 1210-1851 and 1210-2458 (sold separately)) • Made in U.S.A. NOTE: OEM axle will need to be removed to allow new cam adjusters to be installed.
MAY 2024 THE DRAG SPECIALTIES 12 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS DESCRIPTION GOLD RED FRONT RIMS 19” x 3.25” 0210-0422 0210-0425 21” x 3.50” 0210-0423 0210-0426 DESCRIPTION GOLD RED REAR RIMS 18” x 5.50” 0210-0421 0210-0424 FORGED BILLET SPEED-5 RIMS • CNC-machined from radial forged 6061-T6 aluminum for maximum road durability and strength-to-weight ratio • Features a rolled rim lip for the custom look and detailed CNC machine work from the center of the hub to the edge of the rim • Rims can be used on both front and/or rear applications when correct hub kit is installed • Rims accept Arlen Ness hub kits (sold separately), which allow full wheels to be assembled in minutes with basic tools • Structurally tested to meet or exceed DOT and JAS international load ratings NOTE: Please see the 2024 Drag Specialties FatBook or the Drag Specialties/Parts Canada Indian catalogue for required hub kits. 0210-0421 0210-0425 DESCRIPTION STYLE PART # FOR 00-14 BIG TWIN, 00-13 XL (EXCEPT 08-14 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKES, SPRINGER, V-ROD, 06-14 FXD) 12.5” brake rotors Full-floating w/ gold aluminum carrier 1710-4568 12.5” brake rotors Full-floating w/ red aluminum carrier 1710-4569 12.5” brake rotors Full-floating w/ orange aluminum carrier 1710-4570 13” brake rotors Full-floating w/ gold aluminum carrier 1710-4571 13” brake rotors Full-floating w/ red aluminum carrier 1710-4572 13” brake rotors Full-floating w/ orange aluminum carrier 1710-4573 13” brake rotors Full-floating w/ gold aluminum carrier (for use w/ radial caliper brake mounts only) 1710-4574 13” brake rotors Full-floating w/ red aluminum carrier (for use w/ radial caliper brake mounts only) 1710-4575 13” brake rotors Full-floating w/ black/machined aluminum carrier (for use w/ radial caliper brake mounts only) 1710-4576 13” brake rotors Full-floating w/ orange aluminum carrier (for use w/ radial caliper brake mounts only) 1710-4577 OVERSIZE WAVE® FRONT BRAKE ROTORS • Full-floating oversize brake rotor design • Bolt-on design works with the stock hub pattern • Made from high-carbon 420 stainless steel • Laser-cut (never stamped) design is double-disc parallel ground to ensure perfect flatness • Heat-treated for each specific application NOTE: Brake caliper relocation brackets and radial brake caliper mounts not included. NOTE: For maximum braking performance and rotor longevity, Galfer recommends using Galfer brake pads with Galfer rotors (sold separately). PART # DESCRIPTION 1621-1141 For 18-23 FLHC/S, FLFB/S, FLSL and FLDE models MX STYLE DRIVER FLOORBOARDS • TIG-welded steel construction for strength • Black powdercoat finish for style • Serrated top design keeps your feet firmly planted on the boards, even during aggressive riding • Sold in pairs 1710-4575 1710-4568
RkJQdWJsaXNoZXIy NDI5NTY=