15 DRAGSPECIALTIES.COM JUNE 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 0414-0750 For 17-23 FLHX/FLHR/FLHT/FLTR models (except 23 FLHXSE/FLTRXSE) 0414-0749 For 14-16 FLHX/FLHR/FLHT/FLTR models 0414-0751 For 99-13 FLHX/FLHR/FLHT/FLTR models AXEO -1” FRONT SUSPENSION FOR FL MODELS • Touring spring rate delivers improved rider comfort and chassis balance for a better connection to the road • Specifically designed to reduce the factory ride height by one inch on FL touring models • Offers a low stance and sure-footed confidence for shorter riders • Improves ride quality, straight-line stability, high-speed corning, and maneuverability • Increases resistance to bottoming out on large bumps or potholes • Threaded pre-load adjuster allows tuning for various rider weights and increased pre-load range • Reduces front-end dive and improves front tire traction during aggressive braking • Designed for optimum performance with Legend’s air ride or 12” coil rear suspensions • Includes two 1” lowered monotube, dual-chambered damper cartridges, and two top-out springs • Designed to be used with stock diameter front wheels • Made in the U.S.A. NOTE: This product is not designed for use with 21” or 23” front wheels. PART # DESCRIPTION 0414-0755 For 19-24 FLHTCUTG/FLRT, 23-24 FLTRT 0414-0753 For 14-18 FLHTCUTG/FLRT AXEO TRIKE FRONT SUSPENSION • Touring spring rate delivers improved rider comfort and chassis balance for a better connection to the road • Specifically designed for H-D trike models with the rider’s comfort and confidence in mind • Improves ride quality, straight-line stability, high-speed corning, and maneuverability • Increases resistance to bottoming out on large bumps or potholes • Threaded pre-load adjuster allows tuning for various rider weights and increased pre-load range • Reduces front-end dive and improves front tire traction under aggressive braking • Designed for optimum performance with all Legend’s rear suspensions • Includes two stock length monotube, dual-chambered damper cartridges, and two top-out springs • Designed to be used with stock diameter front wheels • Made in the U.S.A. NOTE: This product is NOT designed for use with 21” and 23” wheels. 0414-0755 0414-0750
RkJQdWJsaXNoZXIy NDI5NTY=