PART # DESCRIPTION EMIS* FOR 17-23 FLHT/FLHTK/FLHR/FLHX/FLTRX/FLTRU/FLTRK 1800-2687 Brushed stainless steel 2 1800-2689 Guardian Black 2 FOR 18-24 FXBB/FXBBS, FXLR/FXLRS, FXFB/FXFBS, FLSL AND FLHC/FLHCS 1800-2682 Brushed stainless steel 2 1800-2683 Guardian Black 2 QUALIFIER 2-INTO-1 EXHAUST SYSTEMS • Full stainless steel construction • Computer-aided stepped header design to maximize power output • Precision bends allow for class-leading ground clearance • Full-length heat shields on front and rear header pipes • Race-inspired S&S end cap • Sound reducer dB insert included • Oxygen sensor ports allow use of wide band or stock O2 sensors PART # DESCRIPTION EMIS* 1800-2690 For 20-24 FXLRS, 18-24 FXBB/FXBBS, 18-23 FXFB/FXFBS 3 2-INTO-1 EXHAUST SYSTEM WITH SUPER BIKER MUFFLER • Stepped 1 3/ 4” to 1 7/ 8” stainless steel headpipes • 4” muffler body with tapered end cap • Features TIG welding, 18mm O2 bungs and 12mm adapters • Partial heat shield covers the rear cylinder headpipe • Brushed stainless steel finish • Made in the U.S.A. 1800-2687 1800-2683 • Made in the U.S.A. NOTE: Qualified Manufacturer Declared 49-state Federal Emissions Compliant catalyst exhaust system. THE DRAG SPECIALTIES JULY 2024 DRAGSPECIALTIES.COM JULY 2024 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION EMIS* 1800-2674 For 14-22 XL (except RH Sportster) 2 UPSWEEP 2-INTO-1 PCX™ EXHAUST SYSTEM • PCX™ (Power Chamber Exhaust) Technology • Chambered high-flow catalyst cartridge designed to increase torque • Lightweight, high-grade 304 stainless steel construction • Matte black finish • Hand TIG welded • Mounting and hardware instructions included • Sold each • Made in the U.S.A. PART # DESCRIPTION EMIS* 1020-4200 For 21-23 RA1250/1250S 2 FP4 • Made of polycarbonate plastic/Bluetooth® low energy, FP4 hardware smaller and thinner than the previous generation electronics product • Unit’s LEDs have been simplified so the rider knows exactly what is happening between the FP4 and the rider’s motorcycle • Built from the ground up, Android and iPhone® apps feature a new rider interface and are easier to navigate and use than ever before • Live Data in the FP4 app has been upgraded with a whole new look and an additional gauge to track more crucial data while riding • All necessary hardware and Instructions included • Made in the U.S.A. 2 JULY 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 24 FLTRX/FLTRXSTSE, 23-24 FLTRXSE 2310-0846 13.5” dark smoke 2310-0847 13.5” tint PRO TOURING FLARE™ WINDSHIELDS • The Pro Touring Flare™ is a wider, more full-coverage option for riders and passengers looking for greater wind protection during long-haul touring, yet is stylish enough for use around town • The patented design features “hips” at the sides that re-route air away from the rider while adding downforce to the front end to improve stability and handling compared to the stock windshield design (the stock design creates lift) • The “flip” at the top of the Flare™ kicks air up and over the rider creating cleaner, less turbulent air for the rider and passenger • Wind tunnel tested and designed for maximum performance and air management • Made of Lexan® Polycarbonate with FMR hard coating on both sides of the shield for unmatched durability • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. PART # DESCRIPTION 2330-0327 For all FXRP, FXRT, FXRD fairings FAIRING HEADLIGHT COVER • Ideal for riders seeking to enhance their motorcycles appearance and performance • Designed with the perfect blend of style, protection, and functionality • The clear lens of the headlight cover maximizes light output • Allows improved visibility during nighttime rides • Includes headlight cover, trim and hardware • Made in the U.S.A. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S. And also under International Patents: 324093, 324094, 325192. 2310-0846 2310-0847 PART # DESCRIPTION 1401-1056 FLTR CVO - 23+ - HENRY - 16-19" 1402-0437 INDIAN - 22+ CHIEF - HENRY - 16-19" FRONT FENDER • Stamped steel 14-gauge fender for a smooth consistent finish • 13-step E-coated factory-style finish for corrosion resistance • Laser cut, predrilled for a perfect fit • Experienced increased torsional rigidity as the stronger steel acts as a base • All '14-'22 models include satin-finish mounting blocks • Made in the USA • Front Fender - Henry Fit - 16"-19" REAR FENDER • Stamped from 14-gauge steel using precision, deep-draw stamping technology that ensures a consistently smooth and flawless finish, minimizing bodywork • Laser cut using 5-axis laser technology ensures accurate fitment for direct bolt-on installation • E-coat finish minimizes the need for bodywork and continues to resist rust and corrosion even after it’s painted • Made in the USA • Rear Fender - Vicla Frenched - 9" Extended Rear - Black 1401-1056 1402-0437 PART # DESCRIPTION 1401-1059 FLST - 00-17 - VICLA REAR - +9" SMOOTH 1401-1060 FLST - 00-17 - VICLA REAR - +9" FRENCHED 1401-1059 1401-1060 3 DRAGSPECIALTIES.COM JULY 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
SADDLEMEN More than just seats! Saddlemen offers stylish, practical and durable sissy bags and saddlebag liners to make packing your bike for longer rides easy. And their line of fuel tank covers helps prevent scratches to the bike’s tank and gives at-home mechanics or shop technicians a convenient place to place tools during service work. PART # DESCRIPTION 3515-0239 Fundamentals sissy bar bag FUNDAMENTALS SISSY BAR BAG • Conveniently mounts onto your sissybar pad bracket • Two zipped pockets (one expandable) • Integrated MOLLE modular attachment points for storage customization • All strap ends include our unique Keepers system which eliminates the need for cutting after the bag is installed • Constructed with UV-, water- and weather-resistant 600 x 600 D polyester • Measures 7” L x 5” W (expanded) x 7 1/ 2” H PART # DESCRIPTION 3501-2027 DXT saddlebag liners DXT SADDLEBAG LINERS • Attractively styled liners built to fit perfectly inside your DXT saddlebags • Expandable to match your saddlebag configuration • Wire-reinforced decorative edging provides liner rigidity • Water resistant to provide additional protection against the elements • Rugged 600-denier SaddleTuff construction with zipper closures • Convenient carrying handles • Measure 22.5” L x 14” H x 6” D (non-expanded) • Sold as pair PART # DESCRIPTION 0701-1000 Small 0701-0999 Large FUEL TANK COVERS • Protect your tank in style while servicing or storing your motorcycle • Saddlemen Race Development inspired graphic • Soft inner prevents scratches • Built-in handlebar storage loops and tool pouches • Zippered hardware storage pouch • Available in small for “peanut” tanks and large for full-size tanks 0701-0999 0701-1000 4 JULY 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE (15-1/2” W DRIVER’S SEAT AREA) 0801-1674 W/ grey stitching 0801-1675 W/ black stitching PART # DESCRIPTION OPTIONAL PASSENGER SEATS (12” W PASSENGER SEAT AREA) 0801-1676 W/ black stitching 0801-1677 W/ grey stitching DELUXE TOURING SOLO SEATS WITH BACKREST • Seat pattern features black stitching and an eye-catching carbon fiber inlay • Driver’s backrest is fully adjustable and removable • Bucket-style saddle positions the rider comfortably in the seat for a more controlled ride • Mustang’s own proprietary controlled-density foam formula requires no break-in and retains it’s shape and support for years of durable, reliable comfort PART # DESCRIPTION 0801-1669 For 18-24 FXLR/FXLRS/FXLRST, 18-21 FLSB, 22 FXRST PART # DESCRIPTION 0807-0226 Small pillion (11” L x 9” W) 0807-0227 Small (18” L x 12” W) 0807-0228 Medium (14” L x 14” W) AIRHAWK SEAT PADS • Unique inflatable, multiple-cell design for the ultimate in comfortable seating and vibration absorption • Made from polyurethane and features a breathable, stretchable outer cover and a nonskid urethane base to protect your seat • Features open-mesh side panel to allow air circulation through individual air cells, creating extra ventilation to reduce heat buildup • Shape Fitting Technology eliminates painful pressure points and promotes consistent blood flow for a longer, more comfortable ride • Automatically adjusts to the shape of the rider • Raises ride-height only slightly • Securely fastens via double strap system running under seat or pillion • Will not scratch or disfigure existing seat or pillion • Valve for inflation, adjustment and deflation • Made in the U.S.A. 0807-0226 0807-0227 0807-0228 • Marine-grade fiberglass seat baseplate with polyurethane seat bumpers to absorb vibration • High-quality expanded vinyl seat cover has the appearance of leather but is more durable to withstand the elements • Optional matching passenger seats available (sold separately) • Made in the U.S.A. 0801-1677 0801-1674 0801-1675 SHOWN WITH OPTIONAL PASSENGER SEAT 0801-1676 FRED KODLIN SIGNATURE SERIES SQUAREBACK™ SEAT • Designed by Fred and Len Kodlin, Europe’s famous father/son custom bike-building team • Features contrasting-color, reverse apex chevron pattern on perforated vinyl • Split-panel, gripper vinyl cover for stability and performance • Riders are positioned slightly further back compared to stock • High-rising wall allows the rider increased lower back support • Driver’s seat area measures 11 1/ 2” W • Carefully curated 7” wide tail section provides a stylish look and ample comfort for 2-up riding • Mustang’s proprietary controlled-density foam formula requires no break-in and retains shape and support after years of use • Marine-grade fiberglass baseplate for long lasting support and durability • Polyurethane bumpers to absorb vibration 5 DRAGSPECIALTIES.COM JULY 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 0802-1545 For 18-24 FXLR/FXLRS/FXLRST, 18-21 FLSB MAVERICK DADDY LONG LEGS SEAT • With a combination of touring comfort and finely tailored styling, the Maverick is really two seats in one • Comfort that retains a reasonably low and sporty profile • Perfectly contoured shape • The Maverick will cradle you without restricting movement • Moves rider 2” back from standard Maverick • 6.75” of back support 14.5” wide seating area • 12” W passenger area • Durable black Biker Tec cover • Stitch seat • Molded Marathon Foam PART # DESCRIPTION FOR 18-24 FXLR/FXLRS/FXLRST, 18-21 FLSB 0802-1546 Double diamond seat PART # DESCRIPTION FOR 18-24 FXLR/FXLRS/FXLRST, 18-21 FLSB (CONT) 0802-1548 Pleated seat TAILWHIP UP FRONT SEATS • Takes the Kickflip one step further • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for • Molded Marathon Foam • BikerTec custom cover • Driver seating 12.25” W; passenger seating 7” W • Up Front design moves the driver 2” closer to the front of the bike and easier reach to the handlebars • Highly detailed powdercoated steel carpeted base • Made in the U.S.A. • Baseplate is 16-gauge powdercoated steel • Carpeted seat bottom • Made in the U.S.A. 0802-1548 0802-1546 PART # DESCRIPTION FOR 18-24 FXLR/FXLRS/FXLRST, 18-21 FLSB 0802-1542 Double diamond seat KICKFLIP DADDY LONG LEGS SEATS • This is the seat that every adventurous rider or freestyler would be stoked to own • Maximized back support and ample seating area offer plenty of options for riding – or showing off – at a moment’s notice • Daddy Long Legs moves the rider 2” back from the standard Kickflip • 6 1/ 2” of back support with wide seating area • Durable black Biker Tec cover • Molded Marathon foam • 16-gauge powder-coated steel seat baseplate with carpeted seat bottom • Made in the U.S.A. 0802-1542 6 JULY 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 0801-1501 Smooth, solar-reflective leather 0801-14991 Smooth, vinyl PART # DESCRIPTION 0801-15001 Double diamond, black thread PERFORMANCE PREDATOR 2-UP SEATS WITH BACKREST OPTION • Features solar-reflective leather in the seating area (unless noted) and automotive-grade vinyl on the sides • Features a 53/ 4” tall driver support • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Advanced clean look with optional EZ Glide II™ backrest capability, sold separately • Optional backrests feature solar-reflective leather cover and multiple detents with virtually no metal-to-metal contact for vertical and fore/aft pad adjustment • Includes all mounting hardware 0801-1501 0801-1499 PART # DESCRIPTION 0711-0241 Oil feed line; for 07-17 Softail (except FXSB); repl. OEM #33525-07 0711-0242 Oil return line; for 07-17 Softail (except FXSB); repl. OEM #33531-07 0711-0243 Oil return line; for 00-06 Softail; repl. OEM #33531-00 0711-0244 Oil vent line; for 07-17 Softail (except FXSB); repl. OEM #45806-07 0711-0245 Oil drain elbow; for 00-10 Softail; repl. OEM #63628-00 CHROME OIL LINE ASSEMBLIES • OEM-style replacement components • Accepts all OEM connectors and retainers • Oil drain elbow is high-quality rubber AUTOTUNE ELECTRONIC FUEL INJECTION CONTROL MODULE KITS • Quickly auto-tune fuel curves for front and rear cylinders on a dyno or on-road with new WEGO IIID dual channel wide-band oxygen sensor interface • Robust alpha-N (throttle position and RPM-based) fuel control eliminates problems with long duration/ high overlap camshafts • Extended data logging and diagnostics • Data flash memory stores full 60 minutes of operating data at 10 samples/second • Programmable user input for functions such as two-stage RPM limiter, nitrous retard, and shift kill • Programmable user output for functions such as shift light, nitrous activation, and electric shifter • Powerful Windows software for custom programming and data analysis 0711-0241 0711-0242 0711-0243 0711-0244 0711-0245 FOR 08-23 FLHT/FLHR/FLHX/FLHTC/FLHTCU/FLRT MODELS (EXCEPT 23 FLHXSE/FLTRXSE); 30” L OVERALL (113/4” W FRONT X 9” W REAR) • Billet aluminum housing with black anodized finish • Fully programmable plug-in replacement • Easy plug-in installation 1020-4215 PART # DESCRIPTION EMIS* FOR STOCK MODELS 1020-4214 For 17-20 FLHR/FLHX/FLHT/FLTR models 3 1020-4217 For 18-20 Softail models 3 FOR MODELS WITH TRASK TORNADO TURBO KIT (2.5 BAR MAP SENSOR) 1020-42151 For 17-20 FLHR/FLHX/FLHT/FLTR models 3 FOR MODELS WITH TRASK TORNADO TURBO KIT (2.5 BAR MAP SENSOR) (CONT) 1020-42181 For 18-20 Softail models 3 PART # DESCRIPTION EMIS* FOR MODELS WITH TRASK TORNADO TURBO KIT (3 BAR MAP SENSOR) 1020-4216 For 17-20 FLHR/FLHX/FLHT/FLTR models 3 1020-4219 For 18-20 Softail models 3 0801-1500 1 2.5 Bar MAP Sensor PART # 1020-4221, sold separately. 1Not solar-reflective leather. 7 DRAGSPECIALTIES.COM JULY 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 1131-3945 For 17-23 FLHT/FLHR/FLTR/FLHX models and 18-23 Softail models EXTRA PLATE CLUTCH KIT • Adds 11% more surface area to clutch pack • Aramid fiber plates have a higher-density compound • The aramid fiber friction plates provide increased durability • Includes one extra friction and steel plate to add 10% to clutch capacity • Heavy-duty springs are included • Made in the U.S.A. PART # DESCRIPTION 1120-0452 Replacement shoe adjuster REPLACEMENT SHOE FOR ARMORED ATTITUDE ADJUSTER • Machined from Nylon 66 • Replacement shoe for Armored Attitude primary chain adjuster PART #1120-0437, sold separately • Made in the U.S.A. PART # DESCRIPTION 2120-1332 For 14-23 FLHX, 15-23 FLTRX 2120-1333 For 99-13 FLHT/FLHR models, 99-09 FLTR models, 06-09 FLHX models (except CVO models) 2120-1334 For 10-13 FLHX/FLTRX models 2120-1335 For 09-13 FLTRXSE, FLHXSE TOUR-PAK® QUICK-DISCONNECT WIRING HARNESSES • Add power to your Tour-Pak® with quick-disconnect convenience • Plugs into rear fender harness and connects into your Tour-Pak® • Connector is exposed behind seat for easy removal • Made in the U.S.A. PART # DESCRIPTION 2120-1331 For 24 FLHX/FLTRX/FLTRXSTSE, 23 FLHXSE/FLTRXSE, 21-24 RA1250/ 1250S (+15”) THROTTLE-BY-WIRE EXTENSION HARNESS KIT • Designed and tested to extend your wiring without causing any harm or interference to the motorcycle’s computer when installing taller handlebars • Colour coded to connect to the existing Molex connector; simple plug-in installation • Made in the U.S.A. 2120-1332 8 JULY 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 14-23 H-D MODELS EQUIPPED WITH OEM KING TOUR-PAK 2040-2808 Light bar w/ red lens PART # DESCRIPTION FOR 14-23 H-D MODELS EQUIPPED WITH OEM KING TOUR-PAK (CONT) 2040-2809 Light bar w/ smoked lens PROBEAM® LED KING TOUR PAK RUN/BRAKE/ TURN LIGHT BARS • Replaces the factory rear Tour-Pak® light bar • Running light pipes wrap around sides for increased safety • Full-contrast brake light and turn signals • Red or smoked lens with black trim • Antenna compatible • Plug-and-play PART # DESCRIPTION 2040-3193 W/ white LEDs PART # DESCRIPTION 2040-3194 W/ yellow LEDs LED LIGHT BARS • Feature six high-power LEDs in a die-cast aluminum housing • Mounting bracket is stainless steel • Built-in on/off switch • Include a wiring harness for direct plug-in installation • Light measures approximately 6 1/ 4” W x 1 3/ 4” H x 2” D (160mm x 45mm x 55mm) • 12 VDC, 18W, 800 lumens FOR 15-23 FLRTX/FLTRXS/FLTRXST, 16-19 FLTRU, 18-22 FLTRXSE, 20-24 FLTRK, 23-24 FLTRT PROBEAST™ DUAL TONE AIR HORNS • Direct replacement to stock horn • Attention grabbing 104.9dB rating (at 2 meters) • Built with heavy-duty metal bracket and ABS cover for lasting durability • Internals are 100% self-contained • Cover dimensions: 57/ 8” L x 53/ 4” W • Plug-and-play harness 2107-0310 2107-0311 PART # DESCRIPTION 2107-0310 Black PART # DESCRIPTION 2107-0311 Chrome ELECTROMAGNETIC HORN KIT • Replace the factory horn with 109 dB (at 2 meters) single, low tone electromagnetic MARCO horn • Includes mounting bracket and nut for installation • Plug and play installation with connection to factory wiring 2040-3193 2040-3194 2040-2809 2040-2808 PART # DESCRIPTION 2107-0331 For 18-23 Softails ,11-13 FXS, 13-17 FXSB/FXSE, 14-17 FXDL/FXDLS FOR 84-23 FLT/FLHT/FLHR/FLTR/FLHTCUTG/FLRT/FLTRT, 84-17 SOFTAILS (EXCEPT FXSB/FXS/FXCW/FXCWC), AND 91-17 DYNA MODELS (EXCEPT 14-17 FXDL/FXDLS), XL1200C/XL1200T 9 DRAGSPECIALTIES.COM JULY 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 24 FLTRX/FLTRXSTSE, 23-24 FLTRXSE (11/4” DIAMETER CLAMPING AREA) 0601-6358 0601-6359 12” 35” 101/4” 8” 0601-6360 0601-6361 14” 35” 101/4” 8” 0601-6362 0601-6363 16” 35” 101/4” 8” 1 1/ 4” EZ INSTALL POINTED TOP HANDLEBARS • Revolutionary interlocking bolt-together two-piece handlebar design that takes up half the shelf space, is economical to ship and even faster to install • CNC mandrel-bent from 11/ 4” diameter x .120” wall heavy tube • EZ Install - no more need to fight internal wiring; with our handlebars you can install wiring in minutes • Feature a billet machined top with a large internal machined radius that allows for EZ pulling of wiring (non-welded top corner) • Bars with “squared” lower bends also have additional slots to ease wire routing • Bars are knurled • Made in the U.S.A. NOTE: Accept OEM heated grips. NOTE: U.S. Patent No. 10,946,926. HANDLEBAR WIRING EXTENSION KITS • All the wiring needed when performing a handlebar swap • All kits work with bars with up to an 18” end rise over stock • Assembled in the U.S.A. 0605-0016 0605-0017 0601-6358 0601-6363 PART # DESCRIPTION FOR 24 FLHX/FLTRX, 23-24 FLHXSE/FLTRXSE 0605-0015 Complete replacement handlebar wiring harness (45” L wire lengths) 0605-0016 Three-piece wiring extension kit to lengthen the OEM handlebar switches and TBW sensor FOR 14-23 TOURING (EXCEPT FLHRXS, 23 FLHXSE/FLTRXSE) 0605-0017 Complete replacement handlebar wiring harness (48” L wire lengths) 10 JULY 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 99-23 FLHT/FLHR/FLHX/FLTR/FLTRU/FLTRK/FLTRX, 09-13 H-D FL TRIKE, 00-17 FLST AND 12-16 FLD 1621-1147 Passenger, black 1621-1151 Passenger, chrome FOR 18-23 SOFTAIL MODELS (W/ FOOTPEGS) 1621-1146 Driver, black PART # DESCRIPTION FOR 18-23 SOFTAIL MODELS (W/ FOOTPEGS) (CONT) 1621-1150 Driver, chrome FOR 00-17 FXD/FXR/FXST/XL MODELS (UNIVERSAL MALE MOUNT) 1621-1145 Black 1621-1149 Chrome APEX MINI FLOORBOARDS • Billet 6061 aircraft-grade aluminum construction • Floorboards for FXD/FXR/FXST/XL models include a stainless steel clevis • Driver floorboards for M-Eight Softail models include an aluminum clevis • Triple nickel-plated chrome or black anodized finish • Measure 6.5” L x 3.5” W • Made in the U.S.A. NOTE: Models with passenger footpegs will require the use of OEM accessory floorboard mount. PART # DESCRIPTION FOR 18-23 SOFTAIL MODELS W/ MID CONTROLS 1610-0696 Black PART # DESCRIPTION FOR 18-23 SOFTAIL MODELS W/ MID CONTROLS (CONT) 1610-0697 Chrome BILLET BRAKE ARMS • Increased possible lean angle vs. stock arms • Billet 6061 aluminum construction • Triple nickel-plated chrome or black anodized finish • Integrated durable scrape plate • Compatible with all Thrashin shifter pegs (5/ 16”-24 x 7/ 8” SCHS, sold separately) • Made in the U.S.A. 1621-1151 1621-1145 1610-0697 1610-0696 PART # DESCRIPTION 0632-0983 Throttle tube THROTTLE TUBE • Fits 1” OD handlebars • For H-D Throttle-By-Wire models (except 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE) • Knurled surface for grip adhesion • Machined from 6061-T6 billet aluminum • Dual low friction PTFE inserts for smooth operation • Sold each PART # DESCRIPTION 0630-3216 Moto grips MOTO GRIPS • Slim profile designed with V-Twin motorcycles in mind • Durable proprietary compound • Fully textured diamond grip reduces vibration and provides extra dexterity • Fit most H-D models with 1” handlebars • Available in black • Sold in pairs NOTE: Billet throttle tube not included. 11 DRAGSPECIALTIES.COM JULY 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
TNT-05 SPEEDOMETERS AND MULTI-METER • Eight-color changeable LCD display • Easy to read in all light conditions with backlit design • Speedometer measures speed from 0-100 mph (0-160 km/h) with optional programmable over-speed warning light • Speedometer features all necessary information: odometer, trip meter, thermometer, high temperature warning, fuel meter, low fuel warning, clock, volt meter, and more • D80 multi-meter features digital speedometer (up to 225 mph) and analog tachometer that measures RPM up to 8000 • Available with sleek black bezel PART # DESCRIPTION FOR H-D MODELS WITH 31/2” ON-CENTER RISERS 0602-1461 10” rise 0602-1462 8” rise 0602-1463 6” rise PART # DESCRIPTION 2210-0670 For stock speedo on 22-23 FXLRS models or Koso H-D 04 speedometer (PART #2211-0172) FASTBACK GAUGE BUCKET • Designed for use with Kodlin Fastback riser kits • CNC-machined from billet aluminum • Black anodized finish • 3 3/ 8” cup 0602-1461 0602-1463 FOR 14-23 FLHX/FLHT/FLTRX/FLTRU/FLTRK/FLHTCUTG/FLTRT (EXCEPT 23 FLHXSE/FLTRXSE) 2210-0665 2212-0901 PART # DESCRIPTION 2210-0666 TNT-05S D60 speedometer 2210-0667 TNT-05S D48 speedometer PART # DESCRIPTION 2210-0669 TNT-05 D80 multi-meter (speedometer/tachometer) 2210-0669 2210-0666 2210-0667 HD-03 FOUR-PIECE GAUGE KITS • Plug-and-play • Fit directly on OEM dash and connectors • Available with blue LED display or red LED display • Include multifunction speedometer, tachometer, odometer, volt meter, air suspension meter, gear indicator, trip meter, engine temperature, oil temperature and fuel level gauges • Indicator lights for oil, engine warning, warning light, high beam, fog light, voltage, PART # DESCRIPTION 2210-0664 Blue LED display 2210-0665 Red LED display PART # DESCRIPTION 2212-0901 Optional air suspension pressure sensor anti-theft, cruise, ABS and turn signals • Optional air pressure sensor for models equipped with air suspension is available separately NOTE: On CVO models the run/stop switch must be in the ON position to change settings on the display. • D48 speedometer body measures 23/ 16” in dia. and 2” deep • D60 speedometer body measures 211/ 16” in dia. and 2” deep • D80 multi-meter body measures 33/ 4” in dia. and 23/ 4 “ deep FASTBACK RISER KITS WITH GAUGE BUCKET • CNC-machined from billet aluminum • Black anodized finish • Available in 6”, 8” and 10” height • 1” bar clamp size • Stainless hardware and zip ties included NOTE: Fits 22-23 FXLRS models and H-D models using the FXLRS round gauge or Koso H-D 04 speedo (PART #2211-0172). 12 JULY 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
CARBON FIBER FAT WRAPPER FRONT FENDER • Wrapper full length custom front fender for 21” wide/fat tire FLT Touring models • Features specially notched sides and smooth flowing body lines for contoured curves seen from every angle • 8” wide front fender designed to fit 21” x 5.5” front wheels with 180mm tires • Allows clearance for up to 14” oversized brake rotors • Pair with Arlen Ness smooth style fork boots for 21” wide tire applications for direct bolt-on installation; sold separately in the 2024 Drag Specialties FatBook NOTE: Always mount fender to check clearances prior to custom paint or road testing. PART # DESCRIPTION 1401-1053 For 14-23 FLHT/FLHX/FLHR/FLTRX/FLTRU/FLTRK/H-D FL Trike, 24 FLHRXS/FLHTK/ FLTRK (except 23-24 FLHXSE/FLTRXSE and 24 FLHX/FLTRX/FLTRXSTSE) 1401-1054 For 99-13 FLHT/FLHX/FLHR/FLTR/H-D FL Trike models CARBON FIBER CAFE FRONT FENDERS • Made from OEM quality tooling and the highest quality carbon composite materials available • Each fender features a matching custom window design and direct bolt-on fitment that does not require additional brackets • Available in a polished high-gloss finish that is engineered and tested for UV resistance • Engineered to allow clearance for up to 14” oversized brake rotors • 5.5” wide front fenders designed for use with 130/60-19” front tires • Will work with conventional style factory and most all aftermarket fork legs PART # DESCRIPTION FOR 08-23 FLHT/FLHR/FLTR/FLHX, H-D FL TRIKE, 16-23 SOFTAILS, 20-23 ELW, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE, 16-17 FXDLS (EXCEPT MODELS W/ AIR-ASSISTED FORKS AND 23 FLHXSE/FLTRXSE) 0630-3211 Gold anodized 0630-3212 Red anodized FOR 82-17 BIG TWIN AND 82-22 XL MODELS (EXCEPT 08-17 DRESSERS, H-D FL TRIKE, 16-17 SOFTAILS, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE, 16-17 FXDLS, RH SPORTSTER AND MODELS W/ AIR-ASSISTED FORKS) 0630-3209 Gold anodized 0630-3210 Red anodized DIAMOND GRIPS • Diamond design rubber grips with integrated knurling inside each diamond shaped pocket for a vintage look with excellent hand traction • Premium rubber grip feels soft and comfortable in all riding scenarios • CNC-machined billet end cap • Arlen Ness laser logo on each end cap • New internal design installs like factory grips; no glue required for installation • Sold in pairs 0630-3211 0630-3210 1401-1053 PART # DESCRIPTION 1401-1055 For 14-23 FLHT/FLHX/FLHR/FLTRX/FLTRU/FLTRK/H-D FL Trike, 24 FLHRXS/FLHTK/FLTRK (except 23-24 FLHXSE/FLTRXSE and 24 FLHX/FLTRX/FLTRXSTSE) 13 DRAGSPECIALTIES.COM JULY 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 14-23 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE (EXCEPT 23 FLHXSE/FLTRXSE) 1401-1024 For 16”-19” wheels, w/ black adapters 1401-1025 For 16”-19” wheels, w/ chrome adapters 1401-1026 For 21” wheels, w/ chrome adapters PART # DESCRIPTION FOR 14-23 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE (EXCEPT 23 FLHXSE/FLTRXSE) 1401-1027 For 23” wheels, w/ black adapters 1401-1028 For 23” wheels, w/ chrome adapters DEI FRONT FENDERS • Complete redesign of the classic Yaffe fender • Available for 16”-19” OEM front wheels, custom 21” and 23” front wheels • Front and rear of fenders have been lengthened and the sidewalls thickened • 14-gauge steel construction, made from one solid piece (no welds) • Pre-drilled for installation • E-coated finish • Chrome or black fender adapters included • Made in the U.S.A. PART # DESCRIPTION 2020-2180 Black 2020-2181 Chrome PART # DESCRIPTION 2020-2182 Satin QUAD POD LIGHTING KITS • Super small, laser-bright Lightning Bolt LED lights • Designed to mesh perfectly with Sharknado® fairings and headlamps • Dual function as turn signals and daytime running lights • Easy wiring, no load equalizers required • Each pod includes four Lightning Bolt lights and billet aluminum Quad Pod frame in black, chrome or satin finish • Sold in pairs 2020-2182 2020-2181 2020-2180 1401-1028 1401-1027 1401-1025 1401-1026 1401-1024 14 JULY 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
SLYFOX The SLYFOX mission is simple: make it lighter, make it stronger, make it FASTER. The brand was developed through a lifetime of growing up in a family of racers, engineers and powersports leaders. SLYFOX uses only the finest materials and manufacturing processes to make high-performance products for your American V-Twin motorcycle. PART # DESCRIPTION 1621-1152 Black anodized PART # DESCRIPTION 1621-1153 Polished DRIVER FLOORBOARDS • Full-size floorboards for comfort without sacrificing ground clearance • Billet aluminum construction with a diamond cut finish • Carbon fiber inserts covered with a TPU film protection for durability and a lasting finish • Dimensions: 14” L x 5” W • Sold in pairs 1621-1153 1621-1152 1621-1152 PART # DESCRIPTION FOR 80-23 FLT/FLHT/FLHR/FLHX/FLTR/FLTRX/FLTRU/FLTRK, 09-13 H-D FL TRIKE, 86-17 FLST/F/N AND 12-16 FLD 1621-1154 Black anodized 1621-1155 Polished FOR 18-23 FLDE/FLFB/FLFBS/FLHC/FLHCS/FLSL 1621-1156 Black anodized 1621-1157 Polished MINI DRIVER FLOORBOARDS • Billet aluminum construction with a diamond cut finish • Stainless steel mounting clevis • Carbon fiber inserts covered with TPU film protection for durability and a lasting finish PART # DESCRIPTION M-EIGHT SOFTAIL/ELW/PAN AMERICA (DRIVER) 1620-2531 Black anodized 1620-2532 Polished M-EIGHT SOFTAIL/ELW/PAN AMERICAN (PASSENGER) 1620-2533 Black anodized 1620-2534 Polished FOOTPEGS • Billet aluminum construction with a diamond cut • Stainless steel mounting clevis • Carbon fiber insert covered with TPU film protection for durability and a lasting finish • Sold in pairs • See the 2024 Drag Specialties FatBook for an explanation of footpeg mount styles PART # DESCRIPTION FOR 21-23 FLHT/FLHR/FLHX/FLTR/FLHTRCUTG/FLRT/FLTRT (EXCEPT 23 FLHXSE/FLTRXSE) 0610-2296 Black 0610-2298 Chrome PART # DESCRIPTION FOR 17-20 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK, 19-20 FLHTCUTG/FLRT 0610-2294 Black 0610-2295 Chrome BRAKE/CLUTCH LEVER SETS • Black levers feature black anodized finish with white Slyfox logo and laser engraving • Chrome logos feature Slyfox logo • 6061 aluminum construction • Sold in pairs FOR 80-23 FLT/FLHT/FLHR/FLHX/FLTR/FLTRU/FLTRK/FLTRX, 99-13 H-D FL TRIKES, 86-17 FLST/F/N AND 12-16 FLD • Dimensions: 73/ 4” L x 3” W • Sold in pairs 1621-1154 1621-1157 0610-2296 0610-2295 1620-2533 1620-2532 15 DRAGSPECIALTIES.COM JULY 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
COASTAL MOTO Precision-cast wheels and custom brake rotors that add real style to your ride. Since 2008, Coastal Moto has been leading the way in custom wheels for American V-Twins. They were the first to develop a full 3D, one-piece wheel with an integrated hub. They continue to set the industry standard in design, engineering and manufacture. PART # DESCRIPTION FOR 14-23 FLHT/FLHX/FLTRX/FLTRU, 14-19 FLHTK, 20-24 FLHRXS, 17-19 FLHR (W/ 6.7” BOLT CIRCLE, FIVE LUG MOUNT) 1710-4591 Stainless 1710-4592 Polished stainless CUSTOM 11.8” FRONT BRAKE ROTORS • Rotors have an 11.8” (300mm) diameter • Drilled for better heat dissipation and consistent braking in wet weather • Designed for use with OEM and most aftermarket calipers • Can be used in either right or left side applications • Mounting buttons and screws are included • Sold each PART # DESCRIPTION FOR 00-07 FLHT/FLHR/FLHX CUSTOM WHEEL APPLICATIONS W/ FIVE-LUG MOUNTED ROTORS 1710-4589 Stainless 1710-4590 Polished stainless CUSTOM 11.5” FRONT BRAKE ROTORS • Drilled for better heat dissipation and consistent braking in wet weather • Designed for use with OEM and most aftermarket calipers • Can be used in either right or left side applications • Mounting buttons and screws are included • Sold each NOTE: Requires brake caliper mounts compatible with 11.5” diameter brake rotors. PRECISION-CAST 3D REAR WHEELS • ”Cast” one-piece design wheels at a fraction of the cost of billet or forged wheels • Solid black finish • Includes bearings and valve stems installed by Coastal Moto • Rear wheel hub accepts stock cush-drive, pulley and brake rotor • Available for ABS and non-ABS models • ABS style features intelligent ABS bearings that are “linked-brake ready”; no ABS system reprogramming required • Compatible with TPMS LARGO SOLID BLACK HURRICANE SOLID BLACK 1710-4589 1710-4592 DESCRIPTION LARGO HURRICANE 18” x 5.5” for 09-23 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK w/ ABS 0202-2223 0202-2225 18” x 5.5” for 09-19 FLHT/FLHR/FLHX/FLTRX w/o ABS 0202-2224 0202-2226 16 JULY 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
RkJQdWJsaXNoZXIy NDI5NTY=