PART # DESCRIPTION 2330-0315 For 91-05 FXD (Narrow Glide) 2330-0316 For 86-03 XL PART # DESCRIPTION 2331-0201 For 22-23 Chief 2331-0202 For 16-23 Springfield FXRP FAIRING FIT KITS • Klassic reproduction designed to elevate your motorcycle’s style and performance • Comes as a complete kit • Polyester-primed fiberglass fairing • Powdercoated neck bracket • 7” headlight mount (headlight sold separately) • 9” Flare™ windshield for FXRP style fairings in dark smoke (PART #2310-0635) included • All necessary fasteners and hardware included • Made in the U.S.A. NOTE: Requires relocation of turn signals. PART # DESCRIPTION FOR FXRP-STYLE FAIRINGS (W/ STANDARD BOLT PATTERN) 2310-0828 Yellow 2310-0829 Purple PART # DESCRIPTION FOR FXRP-STYLE FAIRINGS (W/ STANDARD BOLT PATTERN) (CONT) 2310-0830 Bronze KOLOR FLARE™ 9” WINDSHIELDS • Wind tunnel designed and tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields • Windshields are made from acrylic • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192 2310-0828 2310-0829 2310-0830 2331-0201 2331-0202 THE DRAG SPECIALTIES AUGUST 2024 DRAGSPECIALTIES.COM AUGUST 2024 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION EMIS* FOR 17-23 FLHT/FLHTK/FLHR/FLHX/FLTRU/FLTRX/FLTRK 1800-2686 Brushed Stainless 3 1800-2688 Guardian Black 3 PART # DESCRIPTION EMIS* FOR 18-24 FXBB/FXBBS, FXLR, FXLRS, FXFB/FXFBS, FLSL AND FLHC 1800-2684 Brushed Stainless 3 1800-2685 Guardian Black 3 QUALIFIER 2-INTO-1 EXHAUST SYSTEMS • Inspired by the King of the Baggers race bike exhaust system • Stainless steel stepped header construction • Full heat shields on front and rear header pipes • S&S inspired race muffler end cap • Brushed stainless or Guardian Black finish • Made in the U.S.A. PART # DESCRIPTION GEAR DRIVE KITS FOR OIL-COOLED 17-23 M-EIGHT 0925-1568 W/ gloss black pushrod tubes 0925-1569 W/ chrome pushrod tubes GEAR DRIVE KITS FOR TWIN-COOLED 17-23 M-EIGHT 0925-1570 W/ gloss black pushrod tubes 0925-1571 W/ chrome pushrod tubes PART # DESCRIPTION CHAIN DRIVE KITS FOR OIL-COOLED 17-23 M-EIGHT 0925-1572 W/ gloss black pushrod tubes 0925-1573 W/ chrome pushrod tubes CHAIN DRIVE KITS FOR TWIN-COOLED 17-23 M-EIGHT 0925-1574 W/ gloss black pushrod tubes 0925-1575 W/ chrome pushrod tubes M-EIGHT CAM CHEST KITS WITHOUT CAMS • The proven performance of an S&S cam chest kit without the cams; allowing you freedom of choice in cam profiles • Kit oil pump and cam plate are precision machined from billet aluminum • Passage plugs are removable for servicing • Independent scavenge sections for flywheel cavity and cam chest • Debris screens in both scavenge pickups • Pressure relief valve is adjustable with the unit installed in the motor • Provides 44% oil flow increase on the supply side and 58% flow increase on scavenge • Quickee Pushrods • S&S Precision Tappets that are hand-assembled to exacting tolerances • Provide reduced valvetrain noise from startup to shutdown • Close tolerances for low leakdown rates • Fast pump-up and superior high rpm performance • Include hard black anodized billet aluminum tappet cuffs that eliminate distortion • Improve tappet stability in high lift and high rpm situations • Made in the U.S.A. 0925-1568 0925-1571 0925-1572 0925-1575 1800-2688 1800-2684 2 AUGUST 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PRECISION CAST HURRICANE 3D WHEELS • Cast one piece design wheels at a fraction of the cost of billet or forged wheels • Includes bearings and valve stems installed by Coastal Moto • Wheels are designed to accept custom lug-mounted rotors • Custom rotors allow the use of the stock style '00-07 calipers HURRICANE REAR LARGO FRONT LARGO REAR HURRICANE FRONT FITMENT YEARS WHEEL FRONT/REAR SIZE SOLID BLACK FL TOURING W/ABS TPMS COMPATIBLE 08-UP HURRICANE FRONT 21 X 3.50 0201-2450 FL TOURING NON/ABS 08-UP HURRICANE FRONT 21 X 3.50 0201-2451 FL TOURING NON ABS 00-07 HURRICANE FRONT 21 X 3.50 0201-2452 FL TOURING W/ABS TPMS COMPATIBLE 09-UP HURRICANE REAR 18 X 5.5 0202-2225 FL TOURING NON ABS 09-UP HURRICANE REAR 18 X 5.5 0202-2226 PRECISION CAST LARGO 3D WHEELS • Cast one piece design wheels at a fraction of the cost of billet or forged wheels • Includes bearings and valve stems installed by Coastal Moto • Wheels are designed to accept custom lug-mounted rotors • Custom rotors allow the use of the stock style '00-07 calipers FITMENT YEARS WHEEL FRONT/REAR SIZE SOLID BLACK FL TOURING W/ABS TPMS COMPATIBLE 08-UP LARGO FRONT 21 X 3.5 0201-2447 FL TOURING NON NON ABS 08-UP LARGO FRONT 21 X 3.5 0201-2448 FL TOURING 00-07 LARGO FRONT 21 X 3.5 0201-2449 FL TOURING W/ABS TPMS COMPATIBLE 09-UP LARGO REAR 18 X 5.5 0202-2223 FL TOURING NON ABS 09-UP LARGO REAR 18 X 5.5 0202-2224 3 DRAGSPECIALTIES.COM AUGUST 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
CIRO Ciro offers a large selection of parts and accessories to customize your Indian motorcycle. The new Machete™ Bag LED lights add a sleek, eye-catching custom touch. Combine them with the Rydeculture™ Bryant M1 saddlebag lights to really set your ride out from the pack. Both feature direct plug-in wiring connectors to make installation simple! PART # FITS MODEL INDIAN 2040-3138 For 22-24 Pursuit Limited/Dark Horse (includes Premium Package/Premium Package Icon models) 2040-3138 For 22-24 Challenger Elite/Dark Horse Icon, 22 Challenger Jack Daniels Limited Edition, 21-24 Challenger/Challenger limited/Challenger Dark Horse 2040-3138 For 21-24 Roadmaster Limited, 20-23 Roadmaster Dark Horse 2040-3138 For 22-24 Chieftain Dark Horse Icon, 20-23 Chieftain Elite/Chieftain Elite Dark Horse 2040-3138 For 20-24 Springfield Dark Horse RYDECULTURE™ BRYANT M1 SADDLEBAG LIGHTS • Distinguish your motorcycle from the pack in a subtle and classy manner • Red run and brake lights along with red turn signals • Plug-and-play • No drilling required; easy to install with just adhesive • Sold in pairs PART # FITS MODEL INDIAN 2040-31361 For 19-24 Chieftain/Limited/Dark Horse, 20 Chieftain 116” 2040-31361 For 20-24 Springfield Dark Horse/Chieftain Elite/Roadmaster Dark Horse 2040-31362 For 22-24 Challenger/Challenger Dark Horse/Limited/Elite/Pursuit Elite Limited/Limited Dark Horse 2040-31361 For 21-23 Roadmaster Limited MACHETE™ BAG LED LIGHTS • Function and style in one stealthy package • Smoked, shatterproof, polycarbonate lens with built-in optics • Low-profile housing maintains plenty of ground clearance while cornering • Red run, turn and brake LED lights; 40 LEDs in each light • Requires plug-and-play lighting controller or wiring adapter to work (sold separately) • No drilling required; installs easily with adhesive NOTE: Will not fit models with saddlebag scuff guards. 1 Requires wiring controller PART #2050-0499 (sold separately). 2 Requires wiring adapter PART #2120-1244 (sold separately). 4 AUGUST 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION INDIAN 1620-2517 For 23-24 Roadmaster Limited/Dark Horse, 18/20 Roadmaster Elite, 17-18 Roadmaster Classic, 15-24 Roadmaster, 1620-2517 For 22-24 Chieftain Dark Horse Icon, 17-19/21-24 Chieftain Limited/Elite, 20 Chieftain Classic, 16-24 Chieftain Dark Horse, 14-24 Chieftain, 14-18 Chief Classic/Vintage 1620-2517 For 18-24 Springfield Dark Horse, 16-24 Springfield 1620-2517 For 17-20 Chief Dark Horse, 16/18 Chief, 14-18 Chief Classic/Vintage RYDECULTURE™ CHARLES CHAPA ADJUSTABLE PASSENGER COMFORT PEG MOUNT KIT • Allows for more movement and adjustability than stock pegs • Allows for alternative foot positions for a more comfortable ride • Fully adjustable • High strength steel construction • Bolts directly to the frame of the motorcycle with no modification • Includes all required hardware • Mounts work with any RydeCulture™ or Ciro passenger pegs or footrests (sold separately) • Comes in a chrome finish PART # DESCRIPTION 1620-2515 Chrome PART # DESCRIPTION 1620-2516 Black PASSENGER PEG ADAPTERS • Allows you to mount any Ciro passenger footpeg, footrest or floorboard to your motorcycle • Stainless steel construction • Easy installation; uses OEM mounting hardware • Sold in pairs PART # DESCRIPTION 0636-0415 For 14-23 Indian models w/ Indian Touring trunk (except low profile trunk) PASSENGER DRINK HOLDER MOUNT • Fits left or right side of trunk • High-quality rigid cast metal mount and hardware • Powdercoated black to be inconspicuous when mounted • Works great with Ciro standard or Big Ass® Drink holders (sold separately) • Allows for quick removal of drink holder • Easily access your drink while on the road FOR 14-23 CHIEF/C HIEFTAIN, 15-23 ROADMASTER, 16-23 SPRINGFIELD, AND 20-23 CHALLENGER MODELS 1620-2515 1620-2516 5 DRAGSPECIALTIES.COM AUGUST 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
FAT BAGGERS, INC. Fat Baggers now has Round Top handlebars available for the newest Street Glide models. These high-quality, CNC mandrel-bend handlebars with the bolt-together design make it easy to quickly swap out your handlebars. Get your bike to fit you right without a fight! Add a set of handlebars from Fat Baggers! CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 24 FLHX, 23-24 FLHXSE (1” DIAMETER CLAMPING AREA) 0601-6364 0601-6365 10” 36” 15-1/2” 9” 0601-6366 0601-6367 12” 36” 15-1/2” 9” 0601-6370 0601-6371 16” 36” 15-1/2” 9” 1-1/ 4” EZ INSTALL ROUND TOP HANDLEBARS • Revolutionary interlocking bolt-together two-piece handlebar design that takes up half the shelf space, is economical to ship and even faster to install • CNC mandrel-bent from 11/ 4” diameter x .120” wall heavy tube • EZ Install - no more need to fight internal wiring; with our handlebars you can install wiring in minutes • Bars are knurled • Made in the U.S.A. NOTE: Accept OEM heated grips. NOTE: U.S. Patent No. 10,946,926. PART # DESCRIPTION FOR 18-23 FXBB/FXLR AND FXST MODELS W/ MID CONTROLS 1610-0710 Black 1610-0711 Chrome ADJUSTABLE BRAKE LINKAGES • Designed to for easy and precise brake arm height adjustments • Opposing thread joints allow for fine tuning without removing the linkage • Available in anodized black or triple nickel plated chrome finish • All necessary hardware included • Made in the U.S.A. 1610-0710 1610-0711 PART # DESCRIPTION 0602-1504 For 17-23 Touring and 18-23 Softail models 0602-1503 For 84-17 Softails, 91-17 Dyna, 82-00 FXR and 73-03 XL (except FSX/FXSTD/FXDB) SOLID RISER BUSHING KITS • Complete the custom look of your risers • Each kit contains two black and two silver bushings (four total) to match your setup • Compatible with OEM hardware • Made in the U.S.A. 0602-1503 0601-6364 0601-6371 6 AUGUST 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 24 FLTRX/FLTRXSTSE, 23-24 FLTRXSE 0601-6320 0601-6321 10” 33-1/2” 12” 5-1/4” 0601-6322 0601-6323 12” 33-1/2” 12” 5-1/4” 0601-6324 0601-6325 14” 33-1/2” 12” 5-1/4” 0601-6326 0601-6327 16” 33-1/2” 12” 5-1/4” 1-1/ 4” TWIN PEAKS TOURING HANDLEBARS • Handlebars with an emphasis on touring comfort • More parallel wrist angles for a perfect pullback angle and stress-free riding • 31/ 2” on-center knurling, 1 1/ 4” clamping area • Drilled for internal wiring • Will work with hydraulic clutches • Made in the U.S.A. NOTE: Accept H-D OEM heated grips. 0601-6327 0601-6320 PART # DESCRIPTION 2201-0293 Power vision mount POWER VISION® MOUNT FOR PERFORMANCE RISERS • Built to mount your Power Vision fuel controller to LA Choppers billet performance risers • Makes it easy to monitor engine performance and make fueling changes • Billet aluminum construction available in eye-catching bronze finish • Made in the U.S.A. PART # DESCRIPTION FOR 22-23 FLTRXST/FLHXST, 19-22 FLHT, 14-22 FLHR, 14-15 FLHTKSE 2040-3064 Gloss black housing w/ smoke lens PART # DESCRIPTION FOR 22-23 FLTRXST/FLHXST, 19-22 FLHT, 14-22 FLHR, 14-15 FLHTKSE (CONT) 2040-3065 Chrome housing w/ smoke lens PROBEAM® DUAL COLOR RUN/TURN FILLERZ® • Designed to fill the stock oval cutouts on H-D Touring model fender supports • Each Fillerz® features nine LED running lights with amber turn signal function • Direct plug-in adapters included for quick installation • Sold in pairs 2040-3065 2040-3064 PART # DESCRIPTION 3807-0720 Test case TEST CASE • Eliminates guesswork when troubleshooting issues • Plugs into an electrical receptacle for power • Has built-in brake and turn signal momentary switches for testing lighting functions • Case is pre-wired and equipped with plugs for connecting Custom Dynamics most popular LED products • Additional easy-to-use terminal connectors for universal wiring attachments also included • Running power switch • Power adapter included 7 DRAGSPECIALTIES.COM AUGUST 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 19-23 SOFTAIL MODELS, 18 FLSB 1107-0731 Clear/black PART # DESCRIPTION FOR 19-23 SOFTAIL MODELS, 18 FLSB (CONT) 1107-0732 Clear/chrome SCORPION SERIES CLEAR DERBY COVERS • Features a .25”-thick, clear polycarbonate window to your clutch • The scratch- and discoloration-resistant window is firmly secured and sealed with an O-ring gasket • The outer cover area is CNC-machined from billet aluminum, then given a brilliant chrome or Stealth black-anodized finish • The derby cover gasket is also included • For the ultimate in looks and performance, install a Barnett lock-up clutch with your new cover • Made in the U.S.A. NOTE: Will also fit other 18 Softail models if using a narrow profile primary cover. 1107-0732 1107-0731 PART # DESCRIPTION FOR 20-23 FXLRS/FXLRST 0520-3989 Gloss black, left side 0520-3990 Matte black, left side PART # DESCRIPTION FOR 20-23 FXLRS/FXLRST (CONT) 0520-3991 Gloss black, right side 0520-3992 Matte black, right side SIDE COVERS • Aerospace-grade/mil-spec carbon fiber • Vacuum-bagged • Autoclave-cured 0520-3992 0520-3989 PART # DESCRIPTION FOR 08-23 FLHT/FLHR/FLTRX/FLTRU/FLTRK/FLHX, H-D FL TRIKE, 16-23 SOFTAILS, 20-23 ELW, 16-17 FXDLS, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE 0630-2723 Contour Tracer, black 0630-2725 Contour Turbine, black 0630-2724 Air Cushion Tracer, black 0630-2726 Air Cushion Turbine, black 0630-2835 Contour Edge, black 0630-2837 Contour Edge, chrome 0630-2836 Air Cushion Edge, black 0630-2838 Air cushion Edge, chrome 0630-3075 Klassic, black 0630-3076 Klassic, chrome 0630-3077 Air Cushion Klassic, black 0630-3078 Air Cushion Klassic, chrome PART # DESCRIPTION FOR 99-17 TWIN CAM AND 86-22 XL MODELS (EXCEPT 08-17 DRESSERS, H-D FL TRIKES, 16-17 SOFTAILS, 16-17 FXDLS, 14-15 FLSTNSE, 13-15 FXSBSE, 11-12 FLSTSE, AND RH SPORTSTERS) 0630-2839 Contour Tracer, black 0630-2841 Contour Turbine, black 0630-2843 Contour Edge, black 0630-2845 Contour Edge, chrome 0630-2840 Air Cushion Tracer, black 0630-2842 Air Cushion Turbine, black 0630-2844 Air Cushion Edge, black 0630-2846 Air Cushion Edge, chrome 0630-3079 Klassic, black 0630-3080 Klassic, chrome 0630-3081 Air Cushion Klassic, black 0630-3082 Air Cushion Klassic, chrome GRIPS • Seamless Rubber Grip technology • Billet aluminum end caps and collars • Match for Khrome Werks Turbine, Tracer, Edge and Klassic muffler end caps • Fit bars made for 1” grips • Made in the U.S.A. 0630-2726 0630-2835 0630-2841 0630-2846 0630-3079 0630-3082 0630-2723 8 AUGUST 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 06-17 FLD/FXD/FXDWG (EXCEPT FXDF) 0803-0705 W/o driver’s backrest 0803-0706 W/ driver’s backrest ROAD SOFA LS SEATS • Tall lumbar support and wide driver saddle support the back and legs for superior comfort, while the streamlined nose improves the rider’s reach to the ground • Refined split-cushion design maximizes long-range comfort by separating the seating surface from the lumbar support to reduce tailbone and back pressure • GelCore™ in front and rear reduces tailbone pressure and increases circulation and comfort for both driver and passenger • Ventilated soft leather upholstery provides a luxurious look and ride • Made with perforated leather inserts and weatherproof, no-maintenancerequired SaddleHyde™ • Includes a fitted rain cover specially designed to protect seat from water and dirt • Available with or without driver’s backrest PART # DESCRIPTION FOR 06-17 FLD/FXD/FXDWG (EXCEPT FXDF) 0803-0707 W/o driver’s backrest 0803-0708 W/ driver’s backrest ROAD SOFA CF SEATS • Tall lumbar support and wide driver saddle support the back and legs for superior comfort, while the streamlined nose improves the rider’s reach to the ground • Refined split-cushion design maximizes long-range comfort by separating the seating surface from the lumbar support to reduce tailbone and back pressure • GelCore™ in front and rear reduces tailbone pressure and increases circulation and comfort for both driver and passenger • Made with carbon fiber styled inserts and weatherproof, no-maintenancerequired SaddleHyde™ • Includes a fitted rain cover specially designed to protect seat from water and dirt • Available with or without driver’s backrest • Made in the U.S.A. PART # DESCRIPTION FOR 18-23 FXBB/FXBBS/FXST 0802-1563 W/o driver’s backrest 0802-1564 W/ driver’s backrest PART # DESCRIPTION FOR 06-17 FLD/FXD/FXDWG (EXCEPT FXDF) 0803-0709 W/o driver’s backrest 0803-0710 W/ driver’s backrest ROAD SOFA SEATS • Tall lumbar support and wide driver saddle supports the back and legs for superior comfort, while the streamlined nose improves the rider’s reach to the ground • Refined split-cushion design maximizes long-range comfort by separating the seating surface from the lumbar support to reduce tailbone and back pressure • GelCore™ in front and rear reduces tailbone pressure and increases circulation and comfort for both driver and passenger • Available with or without driver’s backrest • Made in the U.S.A. 0802-1563 0803-0710 0803-0708 0803-0706 9 DRAGSPECIALTIES.COM AUGUST 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
ONE-PIECE 2-UP SQUAREBACK SEATS • Seat features a specially-designed recessed cross-section that alleviates tailbone pressure • Wide driver’s area bucket seat positions the driver slightly further back than the stock riding position for improved comfort and lower back support • Squared-off tail section provides a stable area for a passenger or luggage • Split-panel, contrasting stitch, perforated look seat cover is functional gripper vinyl construction • Double-diamond stitch pattern • Mustang’s proprietary controlled-density foam formula requires no break-in and retains shape and support after years of use • Marine-grade fiberglass baseplate for long-lasting support and durability, with polyurethane bumpers to absorb vibration • Made in U.S.A. PART # DESCRIPTION 0801-1670 W/ black stitch PART # DESCRIPTION 0801-1672 W/ gunmetal gray stitch FOR 08-23 FLHT/FLHR/FLTR/FLHX MODELS (EXCEPT 23 FLHXSE/FLTRXSE) (101/ 2” DRIVER SEAT AREA, 61/ 2” PASSENGER SEAT AREA) 0801-1670 0801-1672 PART # DESCRIPTION 0801-1440 Double diamond dull black vinyl 0801-1441 Double diamond shiny black vinyl 0801-1442 Single diamond dull black vinyl 0801-1443 Single diamond shiny black vinyl 0801-1444 GT1 w/HR1 inlay 0801-1445 GT2 w/HR2 inlay 0801-1446 GT2 w/HR3 inlay PART # DESCRIPTION 0801-1447 Maverick stitch dull black vinyl 0801-1448 Maverick stitch shiny black vinyl 0801-1449 Pleated dull black vinyl 0801-1450 Pleated shiny black vinyl 0801-1451 Smooth dull black vinyl 0801-1452 Smooth shiny black vinyl SISSY BAR PADS • Sized to fit standard-height and tall H-D 08-23 Touring sissy bar uprights, can also be used on both low and standard-height H-D 18-23 Softail Holdfast Sissy Bar Uprights • Mounts with a three point • Mounting hardware is not included; will work with LePera Dead End Sissy Bar Bracket Kit 0801-1452 0801-1440 0801-1441 0801-1443 0801-1444 0801-1445 0801-1446 0801-1447 0801-1448 0801-1449 0801-1450 0801-1451 • 11- 1/ 2” W x 7- 1/ 2” T • Made in the U.S.A. 10 AUGUST 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
MAGNUM SHIELDING Magnum Shielding is recognized worldwide as the premier manufacturer of braided brake lines and control cables. Their Quick-Connect braided upper clutch cables are an easily installed upgrade that let you extend the length of your OEM clutch cable without the hassle of having to drain the transmission fluid. The cable extensions are available in braid and color weave options to match all Magnum control cable and brake line styles.
PART # DESCRIPTION 0504-0431 For 09-16 FLHT/FLHR/FLTR/FLHX TWO PIECE CHIN SPOILER • Fills the gap between the front wheel and the frame for a mean custom stance • Hides unsightly regulator and radiator • Two-piece mounting system built for use with Mini Monkey engine guards (sold separately) • 3-D molded, hand laid composite material • Easy, bolt-on installation • Raw finish, ready for paint • Made in the U.S.A. NOTE: This product only fits models equipped with Mini Monkey engine guards. PART # DESCRIPTION FOR 14-23 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE (EXCEPT 23 FLHXSE/FLTRXSE) 1401-0984 For 16”-19” wheels, w/ satin adapters 1401-0985 For 21” wheels, w/ black adapters PART # DESCRIPTION FOR 84-13 FLHT/FLHR/FLTR/FLHX 1401-0986 For 21” wheels, w/ black spacers DEI FRONT FENDERS • Complete redesign of the classic Yaffe fender • Available for 16”-19” OEM, and custom 21” front wheels • Front and rear of fenders have been lengthened and the sidewalls thickened • 14-gauge steel construction, made from one solid piece (no welds) • Pre-drilled for installation • E-coated finish • Satin or black fender adapters/spacers included • Made in the U.S.A.
PART # DESCRIPTION 0214-2818 Mirror polish w/ sugar skull 0214-2819 Black w/ sugar skull PART # DESCRIPTION 0214-2894 Mirror polish w/ Legends Suspension logo 0214-2895 Black w/ Legends Suspension logo FRONT AXLE NUT COVERS • Change the whole look of your front end • Made from 316F stainless steel • Knurled to perfection with many motifs to choose from • Includes 2 set screws with 3M anti-vibration nylon glue and hex wrench, sold as pair FOR 08-22 FLHT/FLHX/FLHR/FLTR AND H-D TRIKE MODELS, 15-20 XG, 08-22 XL, 08-17 DYNA MODELS, 07-22 SOFTAIL MODELS (EXCEPT SPRINGER/FLSTNSE/FXCW/FXCWC/FXSB/FXSBSE/FXSE/FXST-AUS AND FXSTD) AND 02-11 VRSC (EXCEPT VRSCF AND VRSCR) 0214-2818 0214-2819 0214-2894 0214-2895 PART # DESCRIPTION FOR ALL TOURING MODELS AND H-D TRIKES 1303-0383 Mirror polished w/ sugar skull PART # DESCRIPTION FOR ALL TOURING MODELS AND H-D TRIKES (CONT) 1303-0384 Black w/ sugar skull SWINGARM PIVOT COVERS • Made of 316L stainless steel • Hand painted enameling • Easy to install without tools • Functional and decorative • Four spring loaded ball bearings and O-ring seal and secure covers; keeps contaminants out • Sold in pairs NOTE: On some bikes the right-side (high side) might be a tight fit due to paint overspray. PART # DESCRIPTION FOR 84-23 TOURING AND H-D TRIKE MODELS, 86-17 FL SOFTAIL MODELS 1602-1559 Mirror polished w/ sugar skull PART # DESCRIPTION FOR 84-23 TOURING AND H-D TRIKE MODELS, 86-17 FL SOFTAIL MODELS (CONT) 1602-1560 Black w/ sugar skull HEEL-TOE SHIFTER COVERS • Conceals the splined end of the shifter shaft while adding a little style • 316F stainless steel construction • Installation requires removal of heel shift lever • Includes setscrews with anti-vibration nylon glue and hex wrench 1602-1559 1602-1560 PART # DESCRIPTION MIRROR POLISH W/ SMOOTH FINISH 1405-0357 Left rear PART # DESCRIPTION MIRROR POLISH W/ SMOOTH FINISH (CONT) 1405-0358 Right rear ANTENNA COVERS • Made from 316L stainless steel • Replaces the rear fender antenna rubber grommet for a clean custom look • Sold each 1405-0358 1405-0357 1303-0383 1303-0384 FOR 17-23 FLHRXS, 09-13 FLTR, 15-23 FLTRX/FLTRXS, 09-23 FLHX/FLHXS 13 DRAGSPECIALTIES.COM AUGUST 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 1110-0114 For 01-06 FLT/FLHT/FLHR/FLTR, 00-06 Softail, 01-05 Dyna N1 SHIFTER DRUM KIT • N1 shift pattern (neutral-1-2-3-4-5) was designed to prevent false neutrals during aggressive 1-2 upshifts by positioning neutral under 1st • Popular choice for jockey shift/foot clutch users • N1 drum used in conjunction with an electric shifter makes finding neutral (with the solenoid) seamless and yields a solenoid-actuated shift system that almost makes foot shifting obsolete • For 5-speed transmissions • Made in the U.S.A. PART # DESCRIPTION 0213-1254 For 22-23 RA1250/S, 21-23 RH1250/S, 22-23 RH975 CUSH DRIVE DAMPENER • High-quality replacement dampener replaces the stock rubber dampener • Made from proprietary material that has been developed over many hours of testing in the lab and on the street • Will not deteriorate or compress like the OE dampener; provides much longer lifetime • Made in the U.S.A. PART # DESCRIPTION FOR 18-23 FXST, FXBB/S, FXLR/S AND FXLRST 1602-1536 Chrome; repl. OEM #33600143 1602-1537 Gloss black TRANSMISSION SHIFTER ROD LEVERS • Drop-forged steel • Fit stock transmissions on models listed PART # DESCRIPTION 1602-1538 For 18-23 FXST, FXBB/S, FXLR/S and FXLRST; repl. OEM #33900199A SHIFTER SHAFT • Hardened steel with splines; exact replacements for OEM parts • Chrome finish 1602-1537 1602-1536 PART # DESCRIPTION EMIS* FOR 17-24 M-EIGHT TOURING, H-D TRIKE MODELS (EXCEPT CVO, 24 FLHX/FLTRX, 23-24 FLHXSE/FLTRXSE) AND 18-24 M-EIGHT SOFTAIL MODELS 1010-3198 Black 3 1010-3199 Chrome 3 OVAL AIR CLEANER KITS • CNC-machined from billet aluminum • High performance washable K&N® air filter for up to 50% more airflow • Clean look with hidden bolts design 1010-3199 1010-3198 14 AUGUST 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 18-24 SOFTAILS 1701-0773 Chrome brake caliper and black anodized caliper bracket 1701-0775 Black anodized brake caliper and black anodized caliper bracket REAR SIX-PISTON DIFFERENTIAL BORE BRAKE CALIPER KITS • Drastically improves braking performance on M-Eight Softail models • Innovative design allows you to keep factory brake lines eliminating the need to replace troublesome factory ABS lines (only kit on the market) • Include billet caliper bracket, 6-piston differential-bore brake caliper, jumper brake line, banjo bolt and any necessary installation hardware • Properly locates the brake caliper for use with factory diameter 11.5” rear brake rotors PART # DESCRIPTION FOR 18-24 SOFTAILS 1701-0774 Chrome brake caliper and black anodized caliper bracket 1701-0776 Black anodized brake caliper and black anodized caliper bracket REAR FOUR-PISTON DIFFERENTIAL BORE BRAKE CALIPER KITS • Drastically improves braking performance on M-Eight Softail models • Innovative design allows you to keep factory brake lines eliminating the need to replace troublesome factory ABS lines (only kit on the market) • Include billet caliper bracket, 4-piston differential-bore brake caliper, jumper brake line, banjo bolt and any necessary installation hardware • Properly locates the brake caliper for use with factory diameter 11.5” rear brake rotors PART # DESCRIPTION FOR 99-17 TWIN CAM 2212-0897 Chrome PART # DESCRIPTION FOR 99-17 TWIN CAM (CONT) 2212-0898 Black anodized METHOD OIL PRESSURE GAUGE KITS • Give a great view of the gauge and add style to your engine • The finest assemblies available; each is beautifully CNC-machined from aluminum, and each comes with a quality U.S.A.-made stainless steel hose assembly • Include a 60 lb. liquid-filled gauge, bracket, cone assembly, stainless steel hose assembly and hardware • Mount to factory rear rocker box top NOTE: Check clearance between gauge and gas tank. 2212-0898 2212-0897 1701-0774 1701-0776 1701-0773 1701-0775 15 DRAGSPECIALTIES.COM AUGUST 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
RkJQdWJsaXNoZXIy NDI5NTY=