THE DRAG SPECIALTIES SEPTEMBER 2024 DRAGSPECIALTIES.COM SEPTEMBER 2024 GRAND NATIONAL 2-INTO2 HIGH-MOUNT EXHAUST SYSTEM • A true race-replica system featuring the same 3.5” diameter muffler bodies and end cap design as the FTR750 flat track race bikes • Stainless steel header pipes and stainless steel perforated core baffles, wrapped in a long-lasting proprietary insulation for a deep exhaust note • Multi-layer heat shields including a 6mm ceramic thermal barrier to guard riders from exhaust heat PART # DESCRIPTION EMIS* 1800-2692 For 18-24 FXBB/FXLR/FLSL/FXFB/FLDE/FLSB/FLHC (Standard Chassis) 3 SUPERSTREET 2-INTO-1 EXHAUST SYSTEM • Classic 2-into-1 styling • Headers and muffler are fully heat shielded for a blue-proof design • Stainless steel header construction • Brushed stainless steel finish with gloss black end cap • Available without S&S engineered high-flow catalysts • Oxygen sensor ports allow the use of wide band or stock O2 sensors • Models with mid controls require brake pedal kit PART #1610-0709 (sold separately) • Made in the U.S.A. PART # DESCRIPTION EMIS* 1810-3186 For 19-20/22 FTR1200/S, 20/22 FTR1200 Rally and 22 FTR1200 R Carbon 3
2 SEPTEMBER 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* 1801-1810 For 17-24 FLHT/FLHR/FLHX/FLTR models 4 41/ 2” LAVA CHROME MK45 PERFORMANCE MUFFLERS • Lava Chrome finish features the traditional mirror finish of chromium and gives it a smoky radiance for unique dark look with reflective qualities • Finish is durable and easy to clean • 4.5” OD muffler bodies with stainless steel baffle and RaceTEX cartridge packing • Slash-cut black muffler tips • Removable dB reducer is J2825 compliant • Sold in pairs • Made in the U.S.A. NOTE: Qualified Manufacturer Declared Replacement Part on all 17-24 model year M-Eight powered FL Touring models. NOTE: Not for Trike applications. PART # DESCRIPTION EMIS* FOR 25 SCOUT MODELS 1811-4677 Guardian Black 4 PART # DESCRIPTION EMIS* FOR 25 SCOUT MODELS (CONT) 1811-4678 Chrome 4 GRAND NATIONAL SLIP-ON MUFFLERS • Performance slip-on mufflers that will wake up the sound of your Scout • Direct bolt-on to the factory header pipes; do not require EFI tuning • Steel muffler bodies • Aluminum end caps • Stainless steel baffles • Removable dB reducer is J2825 compliant 1811-4678 1811-4677 • Sold in pairs • Made in the U.S.A.
3 DRAGSPECIALTIES.COM SEPTEMBER 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* FOR 17-23 OIL-COOLED M-EIGHT TOURING MODELS 0901-0264 W/ 550G cam 3 PART # DESCRIPTION EMIS* FOR 17-23 OIL-COOLED M-EIGHT TOURING MODELS (CONT) 0901-0265 W/ 475G cam 2 MK136 BLACK EDITION ENGINE FOR M-EIGHT TOURING • Complete crate engine, fully assembled • High-flow cylinder heads with premium valves, valve seats, guides, springs and seals • Intake and exhaust valves are +1mm oversized and .030” longer than stock for improved valve train geometery • .605” lift valve springs • Gear-drive cam • High-strength alloy used in the cylinder head casting for improved strength at high temperatures • Enlarged cooling passages around the exhaust seats • S&S exclusive design breather boxes • Forged pistons • S&S Performance oil pump and cam support plate • Premium valve tappets and tappet cuffs • Billet aluminum engine and valve covers • Sprocket shaft spacer included • Champion brand spark plugs included • Retains stock engine height • Cam cover badge included • Black powdercoat finish matches the factory finish • Crankcase features dual-spray piston cooling jets • Precision-machined oil scraper • Enlarged oil sump • Contoured oil pan floor allows oil to easily drain back to the sump • Made in the U.S.A. 0901-0265 0901-0264 PART # DESCRIPTION EMIS* 1801-1809 For 24 X500 3 GRAND-NATIONAL SLIP-ON MUFFLER • Stainless steel muffler body with exposed TIG welds • Brushed stainless steel finish • Race-inspired Grand National end cap • Removable dB reducer • Made in the U.S.A.
4 SEPTEMBER 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* 0901-0251 1 For 07-16 Touring models (except Twin Cooled models) 3 1 Requires oil line kit PART #0711-0220 for installation (sold separately). T124HC SERIES LONG BLOCK ENGINE • High Compression, 10.8:1 for the ultimate in street performance • No fuel system or ignition systems included • Special head machining fits stock length intake manifolds (S&S manifold size 410) • Stock style breathing system; compatible with stock and most performance air cleaners • Includes Super Stock™ heads, crankcases, TC3 oil pump and cam plate and easy start 640 gear drive cams • Redesigned cam cover • Specs: displacement 124”; bore 41/ 8”; stroke 45/ 8”; piston type forged flat top; compression Ratio 10.8:1 • Stone Gray powdercoat finish matches CVO granite engine components • Made in the U.S.A. NOTE: Cylinder heads on these engines are specially machined to compensate for the non-stock cylinder length. As a result, they are compatible with manifolds and throttle bodies with stock length intake runners. In addition, the breather vent bolt locations have been adjusted so they are in the stock location, so stock style air cleaner back plates will bolt up to these engines. NOTE: Not recommended for Trike models, including conversion models, due to the lugging nature of these bikes. PART # DESCRIPTION EMIS* 0901-0252 1 For 07-16 Touring models (except Twin Cooled models) 3 1 Require the use of oil line kit PART #0711-0220 for installation (sold separately). T124LC SERIES LONG BLOCK ENGINE • Lower Compression, 10.2:1, for great street torque • Includes Super Stock™ heads and T2 crankcase • TC3 oil pump and cam plate • Easy start 585 gear drive cams with redesigned cam cover • Specs: displacement 124”; bore 41/ 8”; stroke 45/ 8”; S&S forged dish pistons, 11cc; compression ratio 10.2:1 • No fuel system or ignition systems included • Special head machining fits stock length intake manifolds (S&S manifold size 405) • Stock style breathing system; compatible with stock and most performance air cleaners • Stone Gray powdercoat finish matches CVO engine components • Made in the U.S.A. NOTE: Cylinder heads on these engines are specially machined to compensate for the non-stock cylinder length. As a result, they are compatible with manifolds and throttle bodies with stock length intake runners. In addition, the breather vent bolt locations have been adjusted so they are in the stock location, so stock style air cleaner back plates will bolt up to these engines. NOTE: Not recommended for Trike models, including conversion models, due to the lugging nature of these bikes.
5 DRAGSPECIALTIES.COM SEPTEMBER 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION 2330-0324 Tall (17”) PART # DESCRIPTION 2330-0323 Standard (9”) TOURING SPORT FAIRINGS • Embody the aggressive cruiser style; the sweeping lines flow nicely with the motorcycle and look great with a variety of handlebar setups • Flanking the headlight bucket are two styling pockets with great potential for further customization with lighting • Made of high-quality, molded ABS and paired with an opaque impactresistant acrylic windscreen for strength and durability • Includes universal mounting kit consisting of black powdercoated, heavyduty steel brackets • Fits 35mm-49mm forks and most 5.75” headlights • Available in tall (17”) or standard (9”) windscreen options OUTLAW FAIRING • Refined style inspired by classic motorcycle heritage • Fits most bikes with a 5.75” headlight • High-quality molded ABS paired with an opaque, impact-resistant acrylic 8” windscreen for strength and durability • Includes a universal mounting kit consisting of black powdercoated heavy-duty steel brackets • Fits 35mm-49mm forks PART # DESCRIPTION 2350-0577 For 22-23 Pursuit, 20-23 Challenger FLARE™ WINGS • Indian Flare™ Wings provide a sporty, custom look to the motorcycle while improving air management and rider comfort • Create a much broader air pocket for rider and passenger protection • Designed to enhance aerodynamic performance • Crafted from lightweight and durable ASA plastic to match the factory finish • Ready to install with 3M™ VHB™ tape already applied • Sold in pairs • Made in the U.S.A. 2330-0323 2330-0324 PART # DESCRIPTION 0636-0504 For 7/ 8” bar 0636-0505 For 1” bar 0636-0506 For 11/ 4” bar NOMAD+™ UNIVERSAL BAR PHONE MOUNTS • Universal fitment magnetic bar phone mounting system • Easy to install with quick-release snap over clamp for easy removal • Great for electric bikes, bicycles, strollers, motorcycles and anywhere with the proper diameter tubing • Adjust the tightness of the mount in location by spinning the lever clockwise or counterclockwise • Diameter-specific mounts allow the user to quickly and securely use the iOmounts® system on 7/ 8”, 1”, or 1 1/ 4” bars. • Includes Nomad+™ mount, black iOcore, iOdisc (2), phone tether PART # DESCRIPTION 2330-0322 Cafe sport fairing CAFE SPORT FAIRING • Adds style in a compact package • Made from high-quality, molded ABS plastic • Includes universal mounting kit consisting of black powdercoated heavy-duty steel brackets • Fits 35mm-49mm forks and is made to fit most 5.75” headlights PART # DESCRIPTION 2330-0321 Outlaw fairing
6 SEPTEMBER 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 24 FLTRU/FLTRK, 08-24 FLHR, 08-23 FLHT/FLHRS/FLHX/FLHXS/FLHXST/FLTRX/FLTRXS/FLTRXST MODELS (EXCEPT 23 FLHXSE/FLTRXSE) 0801-1535 Double diamond seat w/ chestnut thread 0801-1315 Double diamond seat w/ black thread TAILWHIP SEAT • Take the Kickflip one step further • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for • Molded Marathon Foam • BikerTec custom cover • Highly detailed powdercoated steel carpeted base • Made in the U.S.A. PART # DESCRIPTION 0801-1537 Double diamond seat w/ red thread PART # DESCRIPTION 0801-1438 Double Diamond seat w/ black thread TAILWHIP DADDY LONG LEGS SEATS • Rider’s seating area is moved 2” back over the standard Tailwhip, providing extra legroom • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for • Molded Marathon Foam • BikerTec custom cover • Highly detailed powdercoated steel carpeted base • Made in the U.S.A. PART # DESCRIPTION 0801-1544 Double diamond Up Front seat 0801-1545 Basket weave Up Front seat PART # DESCRIPTION 0801-1547 Double diamond Up Front seat w/chestnut thread 0801-1546 Pleated Up Front seat FOR 23-24 FLHXSE/FLTRXSE & 24 FLHX/FLTRX/FLTRXSTSE FOR 24 FLTRU/FLTRK, 08-24 FLHR, 08-23 FLHT/FLHRS/FLHX/FLHXS/FLHXST/FLTRX/FLTRXS/FLTRXST MODELS (EXCEPT 23 FLHXSE/FLTRXSE) 0801-1537 0801-1438 TAILWHIP UP FRONT SEATS • Take the Kickflip one step further • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for • Molded Marathon Foam • BikerTec custom cover • Up Front design moves you 2” closer to the handlebars • Highly detailed powdercoated steel carpeted base • Made in the U.S.A. 0801-1544
7 DRAGSPECIALTIES.COM SEPTEMBER 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS APEX CLUTCH AND BASKET KITS • 60% increase in torque capacity and clutch engagement, resulting in improved power transfer to rear wheel • Designed to reduce lever pull effort while increasing lever feel consistency • Designed for usable power delivery with a wide range of horsepower levels, no need for overly aggressive alternatives like lock-up systems • Improved clutch modulation and control • Reduces clutch operating temperatures with improved oil for longevity and consistent performance • Tunable to power needs and rider preference with interchangeable spring combinations to match engine build while minimizing lever force • Kit includes: Fixed-Pin design billet hub, billet pressure plate, complete clutch pack featuring TorqDrive friction disks, two sets of varied stiffness clutch springs, forged and fully machined clutch basket, basket sleeves and hardware • Made in the U.S.A. PART # DESCRIPTION 1132-1971 For 11-24 Big Twin PART # DESCRIPTION 1132-1972 For 07-10 Twin Cam APEX CLUTCH KITS • Designed to reduce lever pull effort while increasing lever feel consistency • 60% increase in torque capacity and clutch engagement, resulting in improved power transfer to rear wheel • Improved clutch modulation and control • Reduce clutch operating temperatures with improved oil for longevity and consistent performance • Tunable to power needs and rider preference with interchangeable spring combinations to match engine build while minimizing lever force • Designed for usable power delivery with a wide range of horsepower levels, no need for overly aggressive alternatives like lock-up systems • Kit includes: Patented Fixed-Pin design billet hub, billet pressure plate, complete clutch pack featuring TorqDrive friction disks, two sets of varied stiffness clutch springs, basket sleeves and hardware • Made in the U.S.A. 1132-1973 1132-1972 PART # DESCRIPTION 1132-1973 For 17-24 M-Eight 1132-1974 For 11-17 Twin Cam 1132-1975 For 07-10 Twin Cam
8 SEPTEMBER 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS DESCRIPTION MATERIAL/THICKNESS PART # FOR 99-17 TWIN CAM 4.25” bore MLX, .032” 0934-7814 DESCRIPTION MATERIAL/THICKNESS PART # FOR 99-17 TWIN CAM (CONT) 4.25” bore MLX, .036” 0934-7815 REPLACEMENT MLX HEAD GASKETS • MLX Gasket (Multi-Layer-Xtreme) features an extra “stopper” fold-over layer providing a torque limiting surface that prevents yielding of the combustion seal • Proprietary high-temperature coatings along with embossments provide a micro seal for fluids against the head and block surface • MLX head gaskets are essential for all Twin Cam applications using a Turbo, high compression, nitrous or any power adder modifications • Require no special machining and are installed like a regular MLS head gasket • Sold in pairs for popular bores and thicknesses • Made in the U.S.A. PART # DESCRIPTION GASKET TYPE 0934-7817 99-17 88”/96”/103”: Twin Cam EST ROCKER BOX GASKET KIT • Premium materials used for specific applications to provide a long, service free life • Kit includes all gaskets and O-rings needed when servicing both rocker boxes • Made in the U.S.A. OEM # DESCRIPTION MATERIAL PART # QTY. FOR 17-23 M-EIGHT TOURING (HDI) 65900017 Left muffler/cross-over gasket Stainless graphite mesh 0934-7810 pr. 65900056 Right muffler gasket GraFoil® 0934-7811 ea. FOR 21-24 RA1250/S, RH975/S AND RH1250S 65900051 Exhaust header gasket Stainless steel 0934-7812 pr. OEM # DESCRIPTION MATERIAL PART # QTY. FOR 21-24 CHALLENGER, PURSUIT AND SCOUT 5271416 Exhaust header gasket Stainless steel 0934-7813 pr. REPLACEMENT EXHAUST GASKETS • High-quality products for long-term reliability • Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle • GraFoil® gaskets provide flexible graphite technology • Made in the U.S.A. 0934-7812 0934-7811 0934-7810 0934-7815
9 DRAGSPECIALTIES.COM SEPTEMBER 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS CUSTOM DYNAMICS Custom Dynamics ProBEAM® Tour Pak LEDs are a bold, easy-to-install accent for your motorcycle. The newest kits are available for late-model Touring bikes and feature run/turn/brake light functions that really add visibility to your ride. The kits include plug-in wiring connectors so no cutting and splicing is needed. PART # DESCRIPTION 2040-3140 Red lens PART # DESCRIPTION 2040-3141 Smoke lens PROBEAM® SEQUENTIAL TOUR PAK LEDS • Premium LED Tour-Pak lighting with brake light/turn signal function • ProBEAM LED running light pipes that wrap around the Tour Pak edge for increased side visibility • Center row of super-bright LEDs illuminates for full contrast brake LED function • Eleven additional LEDs on each side function as additional LED full-contrast brake lights, can be customized with additional turn signal function • Three built-in turn signal modes available: turn signals can flash solid on, sequential on (LEDs turn on from center of the light outward) or sequential off (all LEDs turn on, then off from center of the light, outwards) • DOT/SAE compliant • Compatible with AM/FM antenna and CB antenna; will work with models with hidden antenna FOR 99-23 MODELS W/ THE LICENSE PLATE MOUNTED TO THE FENDER ABOVE THE TAILLIGHT PART # DESCRIPTION TAILLIGHT ELIMINATOR LICNSE PLATE MOUNT 2030-2353 Black 2030-2354 Chrome PART # DESCRIPTION 3-HOLE BOLT PATTERN COVER ONLY 2030-2355 Black 2030-2356 Chrome TAILLIGHT ELIMINATOR LICENSE PLATE MOUNT • Relocates the license plate in place of the OEM center taillight • Installs in place of the OEM taillight baseplate OEM NO. 28296-99A • Durable metal construction • Includes a wire harness for OEM turn signal connection; also can connect wires from Custom Dynamics LED radius license plate frames (sold separately) • Wire harness is direct plug-in installation • Includes decorative 3-hole bolt pattern cover for when OEM license plate bracket PART NO. 59986-75 is removed; cover also sold separately 2040-3141 2040-3140 FOR 14-24 FLHTK/FLHTKL/FLHTCU/FLHTKSE, 20-24 FLTRK/FLTRKSE, 15-19 FLHTRU/FLTRUSE, 14-24 FLHTCUTG AND 22 FLHTCUTGSE W/ OEM KING TOUR PAK • Direct plug-in wiring installation NOTE: Will fit 14-24 King Tour Pak not equipped with OEM lighting (may require additional components for installation). NOTE: Requires drilling for installation. Use Custom Dynamics clear template/ mounting kit PART #2040-2892 for installation (sold separately, see the 2024 Drag Specialties FatBook). 2030-2353 2030-2356
10 SEPTEMBER 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS CHROME PART # BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 24 FLTRX/FLTRXSTSE, 23-24 FLTRXSE 0601-6402 0601-6403 12” 30-1/ 2” 101/ 2” 51/ 2” 0601-6404 0601-6405 14” 30-1/ 2” 101/ 2” 51/ 2” 0601-6406 0601-6407 16” 30-1/ 2” 101/ 2” 51/ 2” 1-1/ 2” HAMMERHEAD HANDLEBARS • Pointed tip for a look that helps you stand out in the crowd • 1-1/ 4” diameter clamping area • 3-1/ 2” on-center knurling • 5-1/ 2” of pullback for an aggressive feel • Made in the U.S.A. NOTE: Accept H-D OEM heated grips. CHROME PART # BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 24 FLTRX/FLTRXSTSE, 23-24 FLTRXSE 0601-6396 0601-6397 12” 35-1/ 2” 10” 71/ 2” 0601-6398 0601-6399 14” 35-1/ 2” 10” 71/ 2” 0601-6400 0601-6401 16” 35-1/ 2” 10” 71/ 2” 1-1/ 4” PRIME APE HANDLEBARS • Designed for all-day comfort riding with aggressive styling • Slotted for internal wiring • 1-1/ 4” clamping area with 31/ 2” on-center knurling • Made in the U.S.A. NOTE: Accept H-D OEM heated grips. 0601-6401 0601-6396 0601-6402 0601-6407 PART # DESCRIPTION 0602-1487 Black Ops™ PART # DESCRIPTION 0602-1488 Gold Ops™ PHATBAR HANDLEBAR AND RISER KITS • Bars feature 1.25” diameter which tapers off to 1” • 9” risers are CNC-machined from billet aluminum • 12” tall total height, 32” wide, 3” pullback and 2.5” rise • Cable throttle and electronic throttle compatible • Stock HD bolt pattern (3-1/ 2” o.c.) • Internal wiring • Black Ops™ finish features gloss black over a contrasting texture black finish for outstanding durability and looks • Gold Ops™ finish features gloss gold over a contrasting texture gold finish for outstanding durability and looks 0602-1487 0602-1488
11 DRAGSPECIALTIES.COM SEPTEMBER 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 14-23 FLHT/FLHR/FLTR/FLHX 0410-0476 Raw PART # DESCRIPTION FOR 14-23 FLHT/FLHR/FLTR/FLHX (CONT) 0410-0477 Black UPPER STEERING STEMS • CNC-machined, nickel-plated chromoly stem and 6061-T6 aluminum sleeve • Low-profile, two-piece, ultra lightweight design • Made in U.S.A. 0410-0476 0410-0477 WILD 1 Owned and operated by American V-Twin enthusiasts, Wild 1 has been making cool parts for your ride for more than 25 years. Their handlebars and risers are built strong right here in the U.S.A. to add custom style and a just-right fit and feel to your bike every time you sit down and grab the bars for a ride. PART # DESCRIPTION 0602-1466 1.5” straight risers 0602-1470 3.5” straight risers 0602-1467 4.5” straight risers 0602-1468 5.5” pull back risers 0602-1469 6” straight risers 0602-1471 9.5” pull back risers 0602-1472 9.5” straight risers 0602-1473 12” straight risers CHUBBY® BILLET RISERS • Precision-machined from billet aluminum • Drilled and tapped for standard 1/ 2” x 13 mounting bolts • Uses stock top clamp, aftermarket top clamp, or Wild 1 custom billet top clamps (with offset mounting holes) • Gloss black finish • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION 0602-1474 For FXSTS, FLSTS models w/ 1” dia. handlebars CHUBBY® BILLET 2” SPRINGER RISER KIT • Precision-machined from billet aluminum in gloss black finish • Works with any standard 1” handlebar and Wild 1 Chubby Bars • Made in the USA PART # DESCRIPTION 0602-1465 Ball-milled w/ exposed mounting bolts 0602-1475 Smooth w/ hidden mounting bolts BILLET TOP HANDLEBAR CLAMPS • Precision-machined from billet aluminum in a gloss black finish • Works with stock risers and all 1” handlebars, as well as Wild 1 Chubby Risers, Wild 1 Chubby Bars and other custom bars • Fits on all models with 3.5” center-to-center riser spacing and offset mounting holes • Mounting hardware included with hidden hardware style • Made in the U.S.A. 0602-1469 0602-1471 0602-1473 0602-1465 0602-1475
12 SEPTEMBER 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 14-17 DYNA GLIDE W/ MID CONTROLS 1602-1588 Black 1602-1589 Chrome EXTENDED SHIFT ARMS • Shift levers can be paired with any TSC shifter tips (sold separately) • ARP® hardware included • Designed for further forward mid controls • Made in the U.S.A. 1602-1588 1602-1589 PART # DESCRIPTION 1611-0104 For 83-24 FLT/FLHT/FLHR/FLHX/FLTR/FLTRU and 09-24 H-D FL Trike (except 04-07 FLHRS), L87-17 FLST/FLSTF/FLSTN, 12-16 FLD BRAKE PEDAL PAD • Constructed from 6061 aircraft-grade aluminum • Full knurl design for maximum traction • Designed to mount to stock brake pedal arm • ARP® hardware included PART # DESCRIPTION 1610-0712 For 14-24 Touring models P-54 SLIM ADJUSTABLE BRAKE ARM PEDAL • Constructed from 6061 aircraft-grade aluminum • Grip surface measures 1” x 31/ 2” • Includes mounting hardware • Triple nickel-plated chrome finish • Sold each • Made in the U.S.A. PART # DESCRIPTION 1610-0713 For 14-24 Touring models P-54 ADJUSTABLE BRAKE ARM PEDAL • Constructed from 6061 aircraft-grade aluminum • Grip surface measures 21/ 4” x 31/ 2” • Includes mounting hardware • Triple nickel-plated chrome finish • Sold each • Made in the U.S.A. PART # DESCRIPTION 1603-0410 TSC Shorty shifter peg TSC SHORTY SHIFTER PEG • 6061 aircraft-grade aluminum • Includes ARP® 5/ 16”-24 x 7/ 8” fastener (made to Thrashin’s exact specifications) • Fits all HD models and Thrashin billet shift levers • Triple nickel-plated chrome finish • Made in the U.S.A. NOTE: Shifter peg can also be used as a brake pedal on Thrashin Softail billet brake arm; PART #s 1610-0696 and 1610-0697. Not compatible with Thrashin adjustable bagger brake arm. • Triple nickel-plated chrome finish • Dimensions: 4.5” W x 2.75” T • Sold each • Made in the U.S.A.
13 DRAGSPECIALTIES.COM SEPTEMBER 2024 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS REAL STEEL CAFE FRONT FENDER • Constructed from one indestructible piece of 14-gauge steel • Fits OEM 19” front wheel • Aggressive sport styling with an all-business attitude • Direct bolt-on replacement • Includes black-coated billet adapters and hardware • Arrives in natural steel finish ready for scuff, prime and paint • Made in the U.S.A. THICKY STEEL FRONT FENDER • Redesigned, now features a lengthened front and rear, squared ends and thicker sidewalls • Fits 19” OEM front wheel • Built from premium one-piece 14-gauge steel construction, no welds • Added surface area allows for more elaborate custom paint designs • E-coated finish • Pre-drilled for installation • Includes black-finish fender adapters • Made in the U.S.A. PART # DESCRIPTION 1401-1048 For 23-24 FLHXSE/FLTRXSE TALON FRONT FENDER • Radically styled, aggressive front fender with a swooping clawlike shape • 14-gauge steel construction with a raw finish • Pre-drilled for installation • Fits OEM 19” wheels • Black fender adapters included • Made in the U.S.A. PART # DESCRIPTION 1401-1047 For 23-24 FLHXSE/FLTRXSE/FLTRXSTSE DEI FRONT FENDER • Complete redesign of the classic Yaffe fender • Fits 19” wheels • Front and rear of fender have been lengthened and the sidewalls thickened • 14-gauge steel construction, made from one solid piece (no welds) • Pre-drilled for installation • E-coated finish • Black-finish fender adapters included • Made in the U.S.A. PART # DESCRIPTION 1401-1049 For 23-24 FLHXSE/FLTRXSE PART # DESCRIPTION 1401-1046 For 23-24 FLHXSE/FLTRXSE
14 SEPTEMBER 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 23-24 FLHXSE/FLTRXSE 1401-1051 W/ black license plate frame PART # DESCRIPTION FOR 23-24 FLHXSE/FLTRXSE (CONT) 1401-1052 W/ chrome license plate frame SHORT SPORT REAR FENDERS • Aggressive styling with killer profile • Short length for increased ground clearance • Integrated black or chrome license plate frame with LED plate lighting • 3-D molded, hand-laid composite material • Bolt-on installation • Raw finish, ready for paint • Includes custom seat anchor mounting kit • Made in the U.S.A. 1401-1052 1401-1051 PART # DESCRIPTION FOR 15-24 FLRT, 23-24 FLTRT 1401-1042 W/ black license frame, no exhaust outlet 1401-1043 W/ chrome license frame, no exhaust outlet PART # DESCRIPTION FOR 15-24 FLRT, 23-24 FLTRT (CONT) 1401-1044 W/ black license frame, dual exhaust outlets 1401-1045 W/ chrome license frame, dual exhaust outlets PRO STREET TRIKE REAR FENDER KITS • Complete rear-end transformation kit • Handmade, quality composite construction • Includes two bolt-on fenders, roll pan with frenched-in black or chrome LED license plate frame, 5 Thunder Bolt lights (PART #2020-2166) per side and all necessary hardware • Fit’s perfectly over stock 16” wheels and works well with 18”-20” custom wheels • Available with or without exhaust outlets • Raw gray, paint-ready finish • Made in the U.S.A. PART # DESCRIPTION 2330-0320 For 23-24 FLTRT FAIRING DROP BLOCK KIT • Allows you to drop your stock fairing a full 3” • Increases your field of vision • Gives your Road Glide 3 a truly custom “Muscle Bagger” stance and look • 6061-T6 aircraft aluminum mount bracket • Gloss black powdercoated • Included in your kit is our patented Stealth Fairing Support Bar which hides discreetly inside your fairing NOTE: Not for use on models with fairing lowers. NOTE: US Patents #D786,139 and #9,561,831. 1401-1042 1401-1045
15 SEPTEMBER 2024 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS PART # DESCRIPTION FOR 09-23 H-D TOURING MODELS (EXCEPT 23 FLHXSE/FLTRXSE) 2350-0572 Gloss finish PART # DESCRIPTION FOR 09-23 H-D TOURING MODELS (EXCEPT 23 FLHXSE/FLTRXSE) (CONT) 2350-0573 Matte finish AIR DEFLECTORS • Carbon fiber construction • Installation hardware included • Sold in pairs 2350-0573 2350-0572 PART # DESCRIPTION FOR 23 FLHXSE/FLTRXSE 0404-0688 21-3/ 16” (repl. OEM #45500843) FOR 21-24 RA1250 0404-0692 20-7/ 8” (repl. OEM #45500585) BLACK 47MM FORK TUBES • Black Diamond-like carbon coating • Lengths given may not be the exact OEM length • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION FOR 23 FLHXSE/FLTRXSE 0404-0689 21-3/ 16” (repl. OEM #45500843) FOR 21-24 RA1250 0404-0685 20-7/ 8” (repl. OEM #45500585) GOLD 47MM FORK TUBES • Titanium nitride coating • Lengths given may not be the exact OEM length • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION FOR 23 FLHXSE/FLTRXSE 0404-0690 21-3/ 16” (repl. OEM #45500843) FOR 21-24 RA1250 0404-0686 20-7/ 8” (repl. OEM #45500585) ULTRA CHROME 47MM FORK TUBES • Excellent high-luster mirror finish with the durability of hard chrome • Lengths given may not be the exact OEM length • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION FOR 23 FLHXSE/FLTRXSE 0404-0687 21-3/ 16” (repl. OEM #45500843) FOR 21-24 RA1250 0404-0691 20-7/ 8” (repl. OEM #45500585) HARD CHROME 47MM FORK TUBES • Finish is electrolyzed for increased hardness of 55-60 Rockwell • Increased hardness for better long-lasting corrosion resistance • Smoother finish creates less drag and seal wear • Not as bright of a finish as chrome, but more durable • Check length before ordering • Lengths given may not be the exact OEM length • Sold in pairs • Made in the U.S.A.
RkJQdWJsaXNoZXIy NDI5NTY=