SUPERSPORT 2-INTO-1 PCX™ EXHAUST SYSTEM • PCX™ (Power Chamber Exhaust) technology • Mid-length profile 2-into-1 system • 304 stainless steel construction • Hand TIG-welded collector, heat shield and 4” muffler • Classic racing badge and muffler end cap • Made in the U.S.A. PART # DESCRIPTION EMIS* 1800-2719 For 18-24 Softail (except FLFB/S, FXBR/S, FXDR) 2 PART # DESCRIPTION EMIS* FOR 17-24 FLHT/FLHX/FLHR/FLTR 1801-1830 Chrome 4 1801-1831 Black 4 4” SUPERSPORT SLIP-ON MUFFLERS • Extract a deeper and more aggressive roar out of your M-Eight Bagger • With their shorter, sleek profile, they perfectly accent the notched saddlebag design • 4” diameter muffler bodies • Stainless rolled tips with machined billet end caps • Classic racing nameplate • Sold in pairs • Made in the U.S.A. 1801-1830 1801-1831 THE DRAG SPECIALTIES JANUARY 2025 DRAGSPECIALTIES.COM JANUARY 2025 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
MUSTANG Mustang seats have been made in Three Rivers, Massachusetts since 1980. Every seat is made by hand, using only the finest materials and threads for unrivaled fit, finish and lasting quality. Enhance the comfort and beauty of your motorcycle with a seat from Mustang. PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLTRXSE/FLHXSE 0801-1903 Black w/ black stitching 0801-1905 Black w/ cherry stitching 0801-1904 Black w/ gunmetal stitching 0801-1906 Black w/ orange stitching SQUAREBACK™ ONE-PIECE SEAT • Double diamond stitch pattern with colored thread options offer a new take on a classic favorite • Crafted for rider comfort, the seat features a specially designed recessed cross section that alleviates tailbone pressure, offering both comfort and style in one sleek package • Wide driver bucket seat positions the rider slightly back for optimal comfort while providing exceptional lower back support with its high-rising wall • Wide squared-off tail section provides a stable foundation for passengers or luggage, ensuring a smooth and enjoyable ride for the 2-up rider • Positions riders slightly further back compared to stock with significantly enhanced lower back support • Performance-packed cover features split-panel, contrasting stitch, perforated look, and functional gripper vinyl • Mustang’s proprietary controlled-density foam formula requires no break-in and retains shape and support after years of use • Marine-grade fiberglass baseplate for long lasting support and durability, with polyurethane bumpers to absorb vibration 0801-1910 0801-1903 0801-1904 0801-1909 PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLTRXSE/FLHXSE 0801-1907 Black w/ black stitching; w/ smooth passenger seating area 0801-1910 Black w/ cherry stitching; w/ smooth passenger seating area 0801-1908 Black w/ gunmetal stitching; w/ smooth passenger seating area 0801-1909 Black w/ orange stitching; w/ smooth passenger seating area 2 JANUARY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 06-17 DYNA; 29” L OVERALL (113/4” W FRONT) (6” W REAR) 0803-0744 Smooth vinyl w/ black logo PART # DESCRIPTION FOR 06-17 DYNA; 29” L OVERALL (113/4” W FRONT) (6” W REAR) (CONT) 0803-0745 Smooth vinyl w/ grey logo SLYFOX DRIFTER SEATS • Features a 6” tall driver support with unique styling • Made from high-quality automotive-grade vinyl in the seating area and carbon fiber on the sides • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 0801-1841 Smooth solo seat PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE (CONT) 0801-1842 Diamond stitch solo seat BARE BONES SOLO SEATS • Simplistic style brings out the true expression of your custom or stock bike • Premium-grade vinyl cover • Baseplate is powdercoated steel and carpeted to protect painted surfaces • Seating area is 11” W • Pillion pad, PART #s 0801-1843 (smooth), 08011844 (diamond stitch) or 0801-1845 (deluxe diamond stitch) sold separately • Made in the U.S.A. 0803-0745 0803-0744 carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Includes all mounting hardware • Made in the U.S.A. PART # DESCRIPTION FOR 82-94, 99-00 FXR; 29” L OVERALL (11” W FRONT) (5.5” W REAR) 0805-0150 Smooth vinyl w/ black logo PART # DESCRIPTION FOR 82-94, 99-00 FXR; 29” L OVERALL (11” W FRONT) (5.5” W REAR) (CONT) 0805-0151 Smooth vinyl w/ grey logo SLYFOX DRIFTER SEATS • Features a 6.75” tall driver support with unique styling • Made from high-quality automotive-grade vinyl in the seating area and carbon fiber on the sides • The lumbar area features Slip Stop™ high-quality PVC material designed with gripping qualities to reduce slippage • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Includes all mounting hardware • Made in the U.S.A. 0805-0150 0805-0151 0801-1842 0801-1841 3 DRAGSPECIALTIES.COM JANUARY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
YEARS FITMENT ROAD RAGE SUPERBIKE 2023 Electra Glide Highway King FLHFB 1800-2697 1800-2696 2022-2023 Road Glide ST FLTRXST 1800-2697 1800-2696 2022-2023 Street Glide ST FLHXST 1800-2697 1800-2696 2020-2023 Road Glide Limited FLTRK 1800-2697 1800-2696 2019-2022 Electra Glide Standard EFI FLHTI 1800-2697 1800-2696 2017-2024 Electra Glide Ultra Limited FLHTK 1800-2697 1800-2696 2017-2024 Road King Special FLHRXS 1800-2697 1800-2696 2017-2024 Electra Glide Police FLHTPI 1800-2697 1800-2696 2017-2024 Street Glide EFI FLHX 1800-2697 1800-2696 YEARS FITMENT ROAD RAGE SUPERBIKE 2017-2023 Road Glide Special FLTRXS 1800-2697 1800-2696 2017-2023 Street Glide Special FLHXS 1800-2697 1800-2696 2017-2023 Road Glide Custom FLTRX 1800-2697 1800-2696 2017-2023 Road King Police FLHP 1800-2697 1800-2696 2017-2022 Road King EFI FLHR 1800-2697 1800-2696 2017-2019 Electra Glide Ultra Limited Low FLHTKL 1800-2697 1800-2696 2017-2019 Road Glide Ultra FLTRU 1800-2697 1800-2696 2017-2019 Electra Glide Ultra Classic EFI FLHTCUI 1800-2697 1800-2696 BASSANI M8 TOURING XHAUST 2:1 SUPERBIKE SS • Hand TIG-welded stainless steel construction • 1-3/4" headpipes step up to 1-7/8" into the collector to increase flow and improve performance • 4" outside diameter straight can 11" muffler body with high-flow catalyst and matching aluminum end cap • Removable spiral-core louvered baffle features an aggressive sound • 18 mm and 12 mm O² ports with adapters and plugs • Partial heat shields and mounting hardware included • Made in the USA BASSANI M8 TOURING XHAUST 2:1 ROAD RAGE III SS • Features stepped, 1-3/4" to 1-7/8", equal-length headpipes designed for maximum performance • Included heat shields that cover enough of the headpipes for heat protection but end inches from the collector to show off the stainless steel and hand TIG welding • 4" outside diameter reverse-cone, megaphone muffler body with high-flow catalyst • O² ports with sensors, adapters and plugs included • System mounts off of transmission for that truly radical short look • Includes removable baffle and end cap • Made in the USA 1800-2697 1800-2696 4 JANUARY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
WILD BOAR AUDIO APLIFIER/SPEAKER KIT • Complete 800 watt system with “cut in” lid adaptors, 6x9’s and front speakers • Dual WBA 400.2r Amplifiers easily install inside inner fairing • Features R.E.M.I.T. circuitry for excellent FM reception from a Class D amp • Supplied premium plug and play wiring allows radios fader to work • System is easily expandable to add a 3rd WBA 400.2r amp for 3rd pair of speakers • Safe for bikes charging system • Pre-tuned to factory radio makes installation very simple • All required hardware and wire is included NOTE: A Radio software reflash is required PART NO. DESCRIPTION 4405-1014 Amplifer/speaker kit-fairing-saddlebag w/cut in lid adaptors PART NO. DESCRIPTION 4405-0991 Amplifier/speaker kit - 800 w - w/ cut in lid WILD BOAR AUDIO APLIFIER/SPEAKER KIT • Complete 800 watt system with “cut in” lid adaptors, 6x9’s and front speakers • Road Glide specific fairing speaker grills include selectable black trim and chrome trim in box • Dual WBA 400.2r Amplifiers easily install inside inner fairing • Features R.E.M.I.T. circuitry for excellent FM reception from a Class D amp • Supplied premium plug and play wiring allows radios fader to work • System is easily expandable to add a 3rd WBA 400.2r amp for 3rd pair of speakers • Safe for bikes charging system • Pre-tuned to factory radio makes installation very simple • All required hardware and wire is included NOTE: A Radio software reflash is required PART # DESCRIPTION EMIS* FOR 24 FLHX/FLTRX/FLTRXSTSE AND 23-24 FLHXSE/FLTRXSE 1010-3206 Black 2 PART # DESCRIPTION EMIS* FOR 24 FLHX/FLTRX/FLTRXSTSE AND 23-24 FLHXSE/FLTRXSE (CONT) 1010-3207 Chrome 2 OVAL AIR CLEANER KITS • CNC machined from billet aluminum • High performance washable K&N® air filter for up to 50% more airflow • Clean look with hidden bolts design 1010-3206 5 DRAGSPECIALTIES.COM JANUARY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 1120-0459 For 17-24 M-Eight models HEAVY-DUTY COMPENSATOR RAMP • Direct replacement for the OEM compensator ramp • CNC machined from 9000 series steel to handle upgraded horsepower and torque • Heat-treated and powdercoated black for superior strength and corrosion resistance • Made in the U.S.A. PART # DESCRIPTION EMIS* 0930-0243 For 24 FLHTK/FLTRK/FLHRXS, 17-23 FLHT/FLHR/FLHX/FLTR (except 23 FLHXSE/FLTRXSE), 17-24 H-D FL Trike and 18-24 Softail 2 BILLET HEAD BREATHER KIT FOR M-EIGHT • 6061 billet aluminum head breathers replace the OEM plastic parts • Dual O-ring design for a better seal in the head • Unique Labyrinth design significantly reduced oil pass-through • Reduces emissions by lowering the amount of oil being burned • Increased durability compared to the stock head breathers • S&S anodized blue finish • Sold in pairs • Made in the U.S.A. GLOSS BLACK FLAT BLACK DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK - 0601-4196 12” Ape Hanger for Narrow Glide 9” 28-1/2” 6” 5-1/2” 0601-4164 - Dragster wide - 29-1/4” 8-3/4” 6” 1” HANDLEBARS • Steel tubing in a variety of finishes • Wide variety of bends so you get that just-right fit and feel • Slotted and notched for Throttle-By-Wire applications • Made in the U.S.A. NOTE: Accepts H-D OEM heated grips. 6 JANUARY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
GLOSS BLACK FLAT BLACK DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK 0601-2263 - 8” T-Bar (straight risers) 12-1/2” 31” 8-1/2” 5-3/4” 0601-2264 - 10” T-Bar (straight risers) 14-1/2” 31” 8-1/2” 5-3/4” - 0601-4256 Bagger style Ape Hanger 10” 35-1/8” 10” 8” 1-1/ 4” BUFFALO BARS • The ultimate 11/ 4” diameter handlebar, designed for maximum comfort • 1” diameter in clamping area (except T-Bars) • Slotted and notched for Throttle-By-Wire options unless noted • Standard bars have 31/ 2” on-center knurling to prevent movement (except T-Bars) • Springer-style bars have 43/ 4” center diamond knurling for a smooth finished look; work with the OEM Springer risers and handlebar clamps T-BAR CONVENTIONAL • Optional 11/ 4” thick Buffalo risers are also available to complete the look • Optional handlebar clamps cover all of the center area that is sized down to one inch • Optional gauge mounts for T-Bars sold separately; see DASHES & GAUGES section • See the 2025 Parts Canada Drag Specialties Catalogue for handlebar clamps and risers • Made in the U.S.A. NOTE: Not for use with stock risers and handlebar clamp/gauge mount on 883C/1200C models. NOTE: Compatible with hydraulic clutch controls. NOTE: Accepts OEM heated grips unless noted. PART # DESCRIPTION W/O DRIVER’S BACKREST 0801-1041 LS 0801-1399 Plain PART # DESCRIPTION W/ DRIVER’S BACKREST 0801-1043 LS 0801-1400 Plain EXTENDED REACH ROAD SOFA SEATS • Available in plain black and lattice stitch styles • Lattice stitch (LS) retro styling infuses the old-school spirit with a modern twist • Extends the driver’s seating area by a full 2” • Refined split-cushion design separates the seating surface from the lumbar support to reduce tailbone/back pressure for maximum long-range comfort • Features a combination of progressive-density foam and GelCore™ inserts for superior driver and passenger comfort • LS seats have a perforated, ventilated leather cover for the ultimate in luxurious comfort, feel and looks • Includes protective rain cover • Passenger pillion area has received special attention for comfort and to allow a clear view of the road ahead • Available with and without driver’s backrest • Made in the U.S.A. 0801-1043 0801-1399 FOR DRESSER/TOURING FOR 08-23 FLHT/FLHR/FLTR/FLTRU/FLTRK/FLTRX/FLHX (EXCEPT 23 FLHXSE/FLTRXSE) 7 DRAGSPECIALTIES.COM JANUARY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 1130-0871 For 17-24 M-Eight w/ Bowden cable POWER CLUTCH 2.0 • On average 40% less manual force when clutching • Quick, easy installation • 45% relief • Better performance • Easier to adjust • Better pressure point • Made in Germany NOTE: Does not fit Revolution® Max or hydraulic clutch models. PART # DESCRIPTION 0660-0016 Clutch cable control CLUTCH CABLE CONTROL • Makes adjusting the clutch cable easier and more precise than with the original cable adjuster • Compatible with all M-Eight clutch cables • Can also be used with the Muller Motorcycle Power Clutch 2.0; sold separately • Brass finish PART # DESCRIPTION 2102-0473 For 24 FLHTK/FLTRK/FLHRXS, 17-23 FLHT/FLHX/FLHR/FLTR, 17-24 H-D FL Trike; repl. OEM #31600017 2102-0474 For 18-24 Softail; repl. OEM #31600067 HIGH-OUTPUT IGNITION COILS • OEM single-fire design; 45,000V • Designed for aftermarket and OEM ignitions 2102-0473 2102-0474 PART # DESCRIPTION FOR 08-23 FLHT/FLHR/FLTR/FLTRU/FLTRK/FLTRX/FLHX (EXCEPT 23 FLHXSE/FLTRXSE) 0801-1042 Extended reach heated Road Sofa seat EXTENDED REACH HEATED LS ROAD SOFA SEAT • LS seats infuse old-school lattice stitch retro styling with a modern twist • Extended Reach design extends the driver’s seating area a full 2” from the stock seating position • Two-level heat adjustment that connects easily to the bike’s electrical system • Independently controlled heating elements for the rider and passenger • Brightly colored LEDs indicate the level of heat • Seat’s styling and function is unaffected by switches or wiring • Refined split-cushion design separates the seating surface from the lumbar support to reduce tailbone/back pressure for maximum long-range comfort • Seat features a combination of progressive-density foam and GelCore™ inserts for superior driver and passenger comfort • LS seats have a perforated, ventilated leather cover for the ultimate in luxurious comfort, feel and looks • Protective rain cover included with LS seats • Passenger pillion area has received special attention for comfort and to allow a clear view of the road ahead • Made in the U.S.A. FOR DRESSER/TOURING 8 JANUARY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
NAMZ Motorcycle electrics made easy! NAMZ has been a leading provider of motorcycle wiring and electronics products for more than three decades. They have wire harness extensions and quick connect wiring solutions for the latest Dresser models, designed for easy plug-in use. And all products are made in the U.S.A. PART # DESCRIPTION 0605-0018 For 16-23 FLHX/FLTRX (except 23 FLHXSE/FLTRXSE) PRO HANDLEBAR AND GAUGE WIRING KIT • Includes all handlebar switch wiring, speedometer extension and twist grip assembly • Twist grip assembly includes adjustable PVC jacket for handlebar or riser wiring exit • PVC wire loom keeps round shape • All wiring is covered with smallest diameter loom required for a clean, professional look when installed • Made in the U.S.A. PART # DESCRIPTION 2120-1385 For 23 FLTRXSE/FLHXSE, 24 FLHX/FLTRX TOUR-PAK® WIRING INSTALLATION KIT FOR LIGHT BARS AND SIDE MARKER LIGHTS • Utilizes the OEM Tour-Pak® connector and a quick-disconnect wiring harness • Connects H-D or aftermarket wrap-around light bars and side marker lights for the 14-24 King Tour-Pak • Made in the U.S.A. PART # DESCRIPTION 2120-1384 For 23-24 FLTRXSE/FLHXSE, 24 FLHX/FLTRX TOUR-PAK® QUICK DISCONNECT WIRING HARNESS • Add power to your Tour-Pak® with quick-disconnect convenience • Plugs into rear fender harness and connects into your Tour-Pak • Connector is exposed behind seat for easy removal • Made in the U.S.A. PART # DESCRIPTION 2120-1386 For 18-24 Softail (except 18-24 FXBB/FXBR/FXDRS/FXST) PART # DESCRIPTION 2120-1389 For 18-24 FXBB/FXBR/FXDRS/FXST SPEEDOMETER AND INSTRUMENT WIRE EXTENSION HARNESSES • Used when installing taller bars • Measure 15” L • Made in the U.S.A. 2120-1389 2120-1386 9 DRAGSPECIALTIES.COM JANUARY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE 2040-3239 Red lens/red turn signal PART # DESCRIPTION FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE (CONT) 2040-3240 Smoked lens/red turn signal LOW-PROFILE LED SADDLEBAG LIGHTS • Sleek 7/ 16” low-profile design • Functions as low intensity run lights with high intensity brake/signal lights • Mount to the top edge on OEM H-D saddlebags • Utilize super bright LEDs behind a red or smoked lens • Come pre-taped and include a plug-and-play wiring adapter for easy installation • Turn signal flash patterns can be changed from standard/sequential-on/ sequential-off with the use of a magnet • Units are completely sealed • Sold in pairs PART # DESCRIPTION FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE 2040-3232 Red lens PART # DESCRIPTION FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE (CONT) 2040-3234 Smoke lens DUAL COLOR LED SADDLEBAG LATCH LIGHTZ • Replaces reflector in OEM saddlebag hinge faceplate • 81 dual-color LEDs per unit • Can be run as dual-color red running/brake light and amber turn signal or dual-intensity red running/brake only • Chip-on-board LED technology • Dual-color LEDs behind a red or smoke lens • Plug-and-play technology 2040-3239 2040-3240 2040-3232 2040-3234 10 JANUARY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
CHROME PART # GLOSS BLACK PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK FOR 24 FLHX, 23-24 FLHXSE 0601-6572 0601-6573 8” Bagger 8” 35-1/4” 11-1/2” 7” 0601-6574 0601-6575 10” Bagger 10” 35-1/4” 11-1/2” 7” 0601-6576 0601-6577 12” Bagger 12” 35-1/4” 11-1/2” 7” 0601-6578 0601-6579 14” Bagger 14” 35-1/4” 11-1/2” 7” 0601-6580 0601-6581 16” Bagger 16” 35-1/4” 11-1/2” 7” 11/ 4” TWIN PEAKS TOURING HANDLEBARS • Handlebars with an emphasis on touring comfort • More parallel wrist angles for a perfect pullback angle and stress-free riding • Flowing bends on the uprights designed specifically for batwing fairing bikes • 31/ 2” on-center knurling, 1” clamping area • Drilled for internal wiring • Work with hydraulic clutches • Made in the U.S.A. BRAIDED BLACK VINYL BAR HEIGHT FOR 24 FLHX, 23-24 FLHXSE 0662-1198 0662-1202 12” 0662-1199 0662-1203 14” 0662-1200 0662-1204 16” BRAIDED BLACK VINYL BAR HEIGHT FOR 24 FLTRX/FLTRXSTSE, 23-24 FLTRXSE 0662-1205 0662-1208 14” 0662-1206 0662-1209 16” 0662-1207 0662-1210 18” EZ INSTALL PLUS HANDLEBAR INSTALLATION KITS • Include all necessary components needed to install handlebars • Installs without removing the exhaust and draining the transmission oil • Removes and replaces all OEM plastic tubes, connectors and adjusters on the upper clutch cable with upgraded metal parts • Moves the cable adjuster next to the clutch lever for easier adjustment, no tools needed • Kits include CAN bus wire harness for controls, EZ install upper clutch cable, brake line extension, ropes, lube and cable ties • Made in the U.S.A. 0601-6581 0601-6572 0662-1210 0662-1198 11 DRAGSPECIALTIES.COM JANUARY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 0630-3319 Chrome 0630-3320 Black anodized AIR CUSHIONED 3-RING GRIPS • Feature ergonomic seamless rubber grip technology • A special core bar creates air pockets inside the grip body, which dampens vibrations • Billet aluminum end caps and collars • Fit 1” handlebars • Available with chrome or black anodized finishes • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 0630-3321 Chrome 0630-3322 Black SUPER SPORT AIR GRIPS • Utilize air pockets inside of the grip body • No surface bumps • Popular knurled texture • Billet aluminum end caps and collars are included • Available in chrome or black anodized finishes • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 0630-3323 Chrome 0630-3324 Black VELVET AIR 3-RING GRIPS • An incredible soft, vibration dampening grip • Utilize air pockets inside of the grip body • The smooth “velvet-like” surface provides a nice comfortable ride • Billet aluminum end caps and collars are included • Available in chrome or black anodized finishes • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION 0630-3306 Diamond Klassic, chrome 0630-3307 Diamond Klassic, black 0630-3308 Diamond Edge, chrome PART # DESCRIPTION 0630-3309 Diamond Edge, black 0630-3310 Diamond Tracer 0630-3311 Diamond Turbine GRIPS • Seamless Rubber Grip technology • Billet aluminum end caps and collars • Match the Khrome Werks™ Turbine, Tracer, Edge and Klassic muffler end caps • Fit bars made for 1” grips • Sold in pairs • Made in the U.S.A. FOR 08-24 FLHTK/FLTRK/FLHRXS, 08-23 FLHT/FLHR/FLTRX/FLTRU/FLHX (EXCEPT 23 FLHXSE/FLTRXSE), 09-24 H-D FL TRIKE, 16-24 SOFTAIL, 20-23 ELW, 16-17 FXDLS, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE 0630-3321 0630-3322 0630-3319 0630-3320 0630-3324 0630-3323 0630-3307 0630-3308 0630-3309 0630-3310 0630-3311 12 JANUARY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 0610-2337 Black 0610-2340 Blue 0610-2338 Gold PART # DESCRIPTION 0610-2339 Red 0610-2336 Silver ANTHEM PRO LEVER ACCESSORIES KITS • Update the look of your Anthem Pro levers • Includes brake barrel, clutch barrel and two lever ends PART # DESCRIPTION 3-1/2” W X 2” H 2210-0681 Oval chrome 2210-0682 Oval black PART # DESCRIPTION 4-1/2” W X 2” H 2210-0679 Spiked chrome 2210-0680 Spiked black MLX-5000 SERIES UNIVERSAL GAUGES • Provides a small form factor handlebar mount instrument system, including all of the bare necessities, along with customization options to suit your bike’s styling • 0 to 255 mph speedometer, odometer and a pair of resettable trip odometers are standard, along with hidden indicator lamps, left and right turn signal, high beam, neutral, low oil pressure and check engine • Center TFT display auto-dims to allow ideal day and night visibility • Ability to choose from 30 lighting colors and styles • Performance displays can show 0 to 60 mph/kph timer, 1/ 4-mile time and speed, service mileage and more • All features are accessed through a front-mounted tactile pushbutton switch PART # DESCRIPTION GAUGE RELOCATION KITS 0602-1513 Black Ops®, for Softail 0602-1514 Black Ops, Round SUPPLEMENTAL TOP MOUNT CLAMPS 0602-1516 Black Ops, for PART #s 0602-1237, 0602-1239 PART # DESCRIPTION SUPPLEMENTAL TOP MOUNT CLAMPS (CONT) 0602-1517 Gold Ops®, for PART #s 0602-1237, 0602-1239 WARNING LIGHT RELOCATION KIT 0602-1515 Black Ops GAUGE AND WARNING LIGHT RELOCATION KITS • Designed specifically for use on Phatbar kits and take the guesswork out of relocating gauges • Machined from billet aluminum • Includes mounting hardware • PART #0602-1513 relocates stock H-D Softail integrated digital gauge module • PART #0602-1514 relocates stock H-D round gauges (w/ or w/o rear button) • PART #s 0602-1516, 0602-1517 are supplemental top clamps designed to allow the use of relocation kits with older models of Phatbar kits • PART #0602-1515 relocates warning lights used with H-D round style gauges • Black Ops® features a gloss black finish over a contrasting texture black finish for outstanding looks and durability • Gold Ops® features a gloss gold finish over a contrasting texture black finish for outstanding looks and durability 0602-1513 0602-1514 0602-1515 0602-1516 • Can be use with all Dakota Digital handlebar or riser mount brackets (sold separately) • Provides universal wiring inputs, allowing for compatibility with a range of bikes providing discrete signal inputs, but is not suggested for use on CAN Bus models • May require speedometer sensor (sold separately) • Available in oval or spiked version 2210-0682 2210-0679 0610-2336 0610-2338 0610-2339 0610-2340 0610-2337 13 DRAGSPECIALTIES.COM JANUARY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 0408-0448 For 24 FLHX/FLTRX w/ 49 mm conventional fork 0408-0447 For 23-24 FLHXSE/FLTRXSE w/ 62 mm inverted fork X-23 7° BOLT-ON TRIPLE TREES • Features HHI’s Direct Bolt-On installation, with no modifications necessary • Positions front wheel forward approximately 2” • Headlight angle can be adjusted without the use of a raked headlight bezel kit • Uses stock-length fork covers, and does not require fork extensions • Includes fork travel limiters to prevent fender interference • 7° triple tree rake results in stock trail geometry • Responsive and stable handling • Performs as well as or better than stock • Stock fork lock fully functional • For use with 23” x 130 mm or 21” x 180 mm front wheel/tire combination • Black finish • Includes lower bearing and hardware • Made in the U.S.A. NOTE: Hawg Halters recommends rear wheel size to remain stock of 16 x 5.5 or upgraded to 18 x 5.5 wheel with a properly load rated 180 mm tire. NOTE: Raked triple trees change the handling characteristics of the motorcycle. Use caution until familiar with the changes. 0408-0448 0408-0447 PART # DESCRIPTION 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 0506-2363 Black PART # DESCRIPTION 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE (CONT) 0506-2362 Raw SKID PLATES • Protects vulnerable exposed water line and wiring from road scrapes • Keeps road debris from ending your ride • Durable, 0.125” thick 5052 aluminum construction • Simple install with factory hardware • Available in black or raw finish • Made in the U.S.A. 0506-2363 0506-2362 14 JANUARY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 08-24 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK AND H-D FL TRIKE 1623-0603 Heel/toe, blue anodized 1623-0605 Solo, blue anodized 1623-0604 Heel/toe, red anodized 1623-0606 Solo, red anodized SPEEDLINER FOOT CONTROL KITS • Performance based foot controls that include shift levers, brake arm, inner shift lever and shift rod • CNC machined from billet aluminum • Shift rod features specially designed spherical bearings hydraulically pressed in for an ultra-clean look, eliminating the need for heim joints • Available with heel/toe or solo style shifter levers • D esigned to fit 08-24 FLT models, but kits can be converted to fit 00-07 FLT models if installed using brake arm adapter PART #1610-0632; sold separately PART # DESCRIPTION 1601-0583 Blue anodized PART # DESCRIPTION 1601-0584 Gold anodized PART # DESCRIPTION 1601-0585 Red anodized SPEEDLINER SHIFTER RODS • Cleanest shifter rods available, period • CNC machined from 6061-T6 billet aluminum • Features a specially designed spherical bearing pressed in for a clean look and no unsightly heim joints • Measures 12” L center-to-center PART # DESCRIPTION M-EIGHT SOFTAIL/ELW/PAN AMERICA DRIVER FOOTPEGS 1620-2643 Black anodized M-EIGHT SOFTAIL/ELW/PAN AMERICA PASSENGER FOOTPEGS 1620-2644 Raw aluminum 1620-2645 Black anodized MALE MOUNT FOOTPEGS 1620-2660 Raw aluminum PART # DESCRIPTION MALE MOUNT FOOTPEGS (CONT) 1620-2661 Black anodized 13-17 FXSB/SE, 11-13 FXS, 08-11 FXCW/C, 07-21 XL 200N/XL1200NS/XL1200T, 13-22 XL1200V/XL200X/XL1200XS/XL1200C/XL1200CX AND 15-20 XG FOOTPEGS 1620-2662 Raw aluminum 1620-2663 Black anodized BEAR CLAW FOOTPEGS • Serrated for exceptional grip and look • Strong yet light weight aluminum CNC-machined two piece construction • Ride position leveling screw to avoid footpeg sag related issues, common on H-D footpeg mounts • Footpegs measure 4.21” L x 2.87” W x 0.8” thick • Easy installation • Sold in pairs • Made in the U.S.A. NOTE: See the 2024 Parts Canada Drag Specialties FatBook for an explanation of footpeg mount styles. 1620-2643 1620-2644 1620-2660 1620-2663 FOR 99-24 FLT/FLHT/FLHR/FLHX/FLTR/FLTRX/FLTRU/FLTRK AND 00-17 FXST/FLST/FXS/FLS 1601-0583 1601-0584 1601-0585 1623-0606 1623-0605 15 DRAGSPECIALTIES.COM JANUARY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 1401-1059 Smooth PART # DESCRIPTION 1401-1060 Frenched VICLA REAR FENDERS • Available in 9” stretch for dramatic styling • Predrilled to match stock mounting locations and stamped in 14-gauge US steel • Finished with an E-coating to prevent rust and corrosion • Available with or without a frenched license plate pocket • Made in the U.S.A. 1401-1060 1401-1059 PART # DESCRIPTION FOR 24 FLHX/FLTRX, 23-24 FLHXSE/FLTRXSE/FLTRXSTSE 2030-2352 Chrome PART # DESCRIPTION FOR 24 FLHX/FLTRX, 23-24 FLHXSE/FLTRXSE/FLTRXSTSE (CONT) 2030-2351 Gloss black CVO UNIVERSAL STEALTH III LICENSE PLATE FRAMES • Cleans up the look of your CVO and does away with the light box • Direct bolt-on installation • Hidden LEDs in the frame illuminate the license plate • True plug-and-play wiring installation • All necessary mounting hardware included 2030-2351 2030-2352 PART # DESCRIPTION 1620-2578 Chrome PART # DESCRIPTION 1620-2579 Black CHICANE™ FOOTRESTS • Durable EPDM rubber inserts grab your foot and dampen vibration • Side lip helps mitigate your foot slipping off • Easy installation and adjustable • Aluminum construction with stainless steel hardware and mounts • Available in chrome or black • Matches the rest of the Ciro® Chicane™ line • Fits any H-D style 1/2” standard clevis (male mount) • Sold as a pair 1620-2579 1620-2578 FOR 00-05 FXST/00-17 FLST (EXCEPT FXSTD, 07-17 FLSTFB, 08-11 FLSTSB) (7.125” WIDE) 16 JANUARY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
DESCRIPTION FINISH ATLANTIC HURRICANE LARGO MARLIN 21” x 3.5” for 24 FLHTK/FLTRK/FLHRXS, 08-23 FLHT/FLHR/FLHX/FLTR (except 23 FLHXSE/FLTRXSE), 09-24 H-D FL Trike w/ ABS Black cut 0335-0021 0335-0020 0335-0019 0335-0018 PRECISION-CAST 3D FRONT WHEELS WITH DUNLOP TIRES • ”Cast” one-piece design wheels at a fraction of the cost of billet or forged wheels • Available for ABS models • ABS style features intelligent ABS bearings that are “linked-brake ready”; no ABS system reprogramming required • Wheels include Dunlop American Elite 130/60/21 tire mounted and balanced and two 11.8” polished Coastal Moto rotors installed on wheel • Also include one set of front fender relocation brackets for 14-newer models (unless noted) • Compatible with TPMS NOTE: FLHXST/FLTRXST/FLRT models require fender bracket PART #1410-0170 (sold separately). MARLIN BLACK CUT LARGO BLACK CUT HURRICANE BLACK CUT ATLANTIC BLACK CUT 17 DRAGSPECIALTIES.COM JANUARY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
RkJQdWJsaXNoZXIy NDI5NTY=