FLARE™ WINDSHIELDS • Wind tunnel designed and tested, the “hips” provide added downforce for stability while the “flip” at the tip directs air up and over the rider to help eliminate swirling and buffeting • Made from unmatched durability Lexan® polycarbonate with FMR hard coating on both sides of the windshield • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. NOTE: The black version may not be suitable for shorter riders as it’s an opaque material. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S And also under International Patents: 324093, 324094, 325192. PART # DESCRIPTION FOR 24 FLHX, 23-24 FLHXSE 2310-0857 8” black 2310-0858 8” clear PART # DESCRIPTION FOR 24 FLHX, 23-24 FLHXSE 2310-0859 8” dark smoke 2310-0860 8” tint PART # DESCRIPTION FOR 24 FLTRX/FLTRXSTSE, 23-24 FLTRXSE 2310-0853 10” black 2310-0854 10” clear PART # DESCRIPTION FOR 24 FLTRX/FLTRXSTSE, 23-24 FLTRXSE (CONT) 2310-0855 10” dark smoke 2310-0856 10” tint SPORT FLARE™ WINDSHIELDS • The Sport Flare™ offers radical curves and a sportier stance; it complements the lines of the new fairing with a more aggressive profile and adds stability and handling with improved air management • The patented design features “hips” at the sides that re-route air away from the rider while adding downforce to the front end to improve stability and handling compared to the stock windshield design (the stock design creates lift) • The “flip” at the top of the Flare™ kicks air up and over the rider creating cleaner, less turbulent air for the rider and passenger • Wind tunnel tested and designed for maximum performance and air management 2310-0857 2310-0858 2310-0860 • Made of Lexan® Polycarbonate with FMR hard coating on both sides of the shield for unmatched durability • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. NOTE: The black version may not be suitable for shorter riders as it’s an opaque material. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S. And also under International Patents: 324093, 324094, 325192. 2310-0853 2310-0856 THE DRAG SPECIALTIES FEBRUARY 2025 DRAGSPECIALTIES.COM FEBRUARY 2025 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION EMIS* FOR 17-24 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK 1800-2713 Chrome w/ chrome race tip end caps 3 1800-2714 Black w/ black race tip end caps 3 1800-2711 Eclipse w/ Eclipse Edge billet tip end caps 3 1800-2712 Eclipse w/ Eclipse Klassic billet tip end caps 3 1800-2715 Eclipse w/ Eclipse race tip end caps 3 FOR 09-16 FLHT/FLHR/FLHX/FLTRX 1800-2716 Chrome w/ chrome race tip end caps 3 1800-2717 Black w/ black race tip end caps 3 1800-2718 Eclipse w/ Eclipse race tip end caps 3 2-INTO-2 TWO-STEP CROSSOVER EXHAUST SYSTEMS • Enlarged interconnected headers make for improved horsepower and low-end torque • 1.75” to 1.875” high-flow 16-gauge stepped primary headers • Systems for 17-24 models feature a full 2” left side crossover and 4.5” muffler bodies with 2” inlets and billet end caps • Systems for 09-16 models feature an obround 1.875” crossover and 4” diameter, 16-gauge absorptive mufflers with 2” inlets and billet end caps • 2.50”, 220°, 16-gauge heat shields • Removable baffles are wrapped in stainless steel wool and high-temp fiberglass for a rich mellow tone • 18 mm and 12 mm O2 bungs welded into the primaries • Heavy-duty, AccuSeal® reaction-block header-to-muffler clamps included • Eclipse features a proprietary, high-temperature black chrome electroplated finish • Mufflers sold in pairs • Made in the U.S.A. PART NO. DESCRIPTION EMIS* 49-STATE 1810-32101 Brushed stainless 2 1810-32111 Guardian Black 2 PART NO. DESCRIPTION EMIS* RACE ONLY 1810-3212 Brushed stainless 3 1810-3213 Guardian Black 3 QUALIFIER 2-INTO-1 EXHAUST SYSTEMS • Inspired by the S&S King Of The Baggers racing efforts • Stainless steel stepped header design to maximize power output • Full-length heat shields on front and rear header pipes • Race-inspired S&S end cap • J2825 compliant removable dB reducer • Made in the U.S.A. 1 Qualified Manufacturer Declared 49-State Federal Emissions compliant catalytic exhaust system. 1810-3210 1810-3213 1800-2714 1800-2711 1800-2712 1800-2716 FOR 22-24 CHIEF 2 FEBRUARY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART NO. DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 0801-1681 Front LS w/ black stitching 0801-1682 Rear LS w/ black stitching 0801-1684 Full LS w/ black stitching PART NO. DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE (CONT) 0801-1680 TR w/ black stitching 0801-1685 Front TR, rear LS w/ black stitching STEP-UP™ SEATS • Saddlemen® collaborated with top freestyle performers to create the T-sport inspired Step-Up™ lattice stitch (LS) or tuck-n’-roll (TR) seats • LS seats infuse old-school lattice stitch retro styling with a modern twist • TR seats feature true tuck-n’-roll styling • High lumbar keeps the rider locked into the seat • Features Saddlemen’s Ultra-Foam which is formulated to provide a perfect balance of rigidity and user compliance with integrated GelCore™ technology • Black whisper-grain SaddleHyde™ cover • Installs easily with all necessary mounting hardware and instructions included • Made in the U.S.A. PART NO. DESCRIPTION 0801-1683 For 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE STEP-UP™ GRIPPER SEAT • Ultra-modern styling with the extreme gripper lumbar – keeps the rider securely locked in the seat • Smooth SaddleHyde™ styling cues • Combines a GelCore™ interior and Ultra-Foam to create a foam that is a perfect balance of rigidity and user compliance • Ultra-Foam’s unique molding process creates an element-resistant self-skinning process that seals the foam from water and enhances the seat’s durability as well as comfort PART NO. DESCRIPTION FOR 96-03 DYNA; 291/2” L OVERALL (11” W FRONT) (51/2” W REAR) 0803-0746 Smooth vinyl w/ Slip Stop™ and black logo 0803-0747 Smooth vinyl w/ Slip Stop and gray logo PART NO. DESCRIPTION FOR 04-22 XL; 271/2” L OVERALL (11” W FRONT) (51/2” W REAR) 0804-0810 Smooth vinyl w/ black logo 0804-0811 Smooth vinyl w/ gray logo SLYFOX SEATS • Features a 6” tall driver support with unique styling • Made from high-quality automotive-grade vinyl in the seating area and carbon fiber on the sides • PART #s 0803-0746 and 0803-0747 feature the lumbar area with Slip Stop™ high-quality PVC material designed with gripping qualities to reduce slippage • Molded polyurethane foam for maximum comfort and styling • Co-molded GelCore is the largest comfort advancement in motorcycle seating since the creation of the suspension • If you are looking for the ultimate performance seat upgrade, look no further • Made in the U.S.A. 0801-1680 0801-1685 0804-0810 0803-0747 0801-1681 0801-1682 0801-1684 • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Includes all mounting hardware • Made in the U.S.A. 3 DRAGSPECIALTIES.COM FEBRUARY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
LA CHOPPERS Handlebars with attitude! The new one-piece Kage Fighter T-Bars feature crossbars directly welded to the risers for smooth, clean style. The bars are designed for internal wiring to keep everything tucked in and neat for a bold, aggressive look. CHROME PART NO. GLOSS BLACK PART NO. END RISE WIDTH RISER WIDTH PULLBACK 0601-6617 0601-6618 10” 321/2” 3” 41/2” 0601-6619 0601-6620 12” 321/2” 3” 41/2” 0601-6621 0601-6622 14” 321/2” 3” 41/2” 0601-6623 0601-6624 16” 321/2” 3” 41/2” 1-1/ 4” ONE-PIECE KAGE FIGHTER T-BARS • High-strength steel tubing construction • Crossbars are welded directly to the risers • Accept stock controls • Straight risers available in 10”, 12”, 14” and 16” • 3-1/ 2” on-center risers • Designed for internal wiring • Made in the U.S.A. 0601-6624 0601-6617 CHROME PART NO. BLACK PART NO. END RISE WIDTH CENTER WIDTH PULLBACK FOR 98-13 FLTR (EXCEPT MODELS WITH OEM AIR-RESERVOIR SUSPENSION SYSTEM) 0601-6472 0601-6473 10” 34” 11” 6” 0601-6475 0601-6474 12” 34” 11” 6” 1-1/ 4” MONKEY DRAG BARS • Low, sleek design based on the famous Monkey Bar line • Knurled 1” diameter clamping area • Drilled for internal wiring • Notched for Throttle-By-Wire applications • Made in the U.S.A. NOTE: Will also fit most 96-23 models with 3-1/ 2” on-center risers (except Springer, FLT/FLHT and XL883C/1200C models). NOTE: Accept H-D OEM heated grips. PART NO. DESCRIPTION 0602-1522 6” rise 0602-1521 8” rise 0602-1520 10” rise FASTBACK RISER KITS • CNC machined from billet aluminum • Fits handlebars with 1” center diameter • Available in bronze finish • Stainless hardware and zip ties included • Fits with digital instrument cluster NOTE: Recommend using with solid riser bushings PART #0602-1434. 0602-1520 0601-6474 0601-6472 FOR 24 FLTRX, 23-24 FLTRXSE/FLTRXSTSE FOR 18-24 FXLRST/FXBB/FXBBS/FXBR/FXBRS/FXST 4 FEBRUARY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART NO. DESCRIPTION 0610-2349 For 23-24 FLTRXSE/FLHXSE, 24 FLTRXSTSE/FLTRX/FLHX ANTHEM PRO LEVER SET • The ultimate performance levers for V-Twin motorcycles • Unbreakable spring-loaded hinge and folding lever design • Adjustable from stock length to Shorty 1.5” shorter • Micro-Adjuster for precise custom ergonomics • CNC machined from high quality aluminum • Available in black with black Micro-Adjuster • Sold in pairs PART NO. DESCRIPTION FOR 23-24 FLTRXSE/FLHXSE, 24 FLTRXSTSE/FLTRX/FLHX 0610-2344 Anthem, chrome 0610-2345 Anthem, black 0610-2346 Anthem, contrast PART NO. DESCRIPTION FOR 23-24 FLTRXSE/FLHXSE, 24 FLTRXSTSE/FLTRX/FLHX (CONT) 0610-2341 Journey, chrome 0610-2342 Journey, black ADJUSTABLE LEVER SETS • Easily adjust lever to bar reach for individual riders (limited inward adjustment) 0610-2344 0610-2346 0610-2341 PART NO. DESCRIPTION FOR 23-24 FLTRXSE/FLHXSE, 24 FLTRXSTSE/FLTRX/FLHX 0610-2347 Chrome 0610-2348 Black ANTHEM ADJUSTABLE SHORTY LEVER SETS • 1.5” shorter in length than standard Anthem levers • Easily adjusts for individual rider’s preference (limited inward adjustment) • CNC machined from high-quality aluminum • Sold in pairs 0610-2348 0610-2347 PART NO. DESCRIPTION 0640-1770 Chrome, left 0640-1771 Chrome, right 0640-1768 Black, left 0640-1769 Black, right NO. 1 RECTANGULAR MIRRORS • Mirror head can be locked in place or adjustable • 3.5” x 1.5” rectangle convex mirror glass • Mirror head swivels on a corrosion-free stainless steel ball joint that provides super-smooth action and longevity • CNC machined from 6061 billet aluminum • OEM-style stem (dimensions 4.3875” L x 1.5” W x 4.5” H) • Hard black anodize or chrome-plated finishes • Sold each • Made in the U.S.A. 0640-1768 0640-1771 • CNC machined from high-quality aluminum • Lever sets sold in pairs 5 DRAGSPECIALTIES.COM FEBRUARY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART NO. DESCRIPTION 1009-0217 For 24 FLHTK/FLTRK, 08-23 FLH/FLHT/FLHX/FLTR (except 23 FLHXSE/FLTRXSE) and 09-24 FLHTCUTG/FLTRT w/ center fuel fill; repl. OEM #s 62908-08, 75069-08D 1009-0216 For 08-24 FLHR/FLHRC/FLHRXS and 15-24 FLRT w/ right side fill; repl. OEM #75076-08B 1009-0218 For 05-07 FLHRS; repl. OEM #s 75227-04, 75227-04A, 75227-06 1009-0212 For 00-07 FLHR/FLHRC/FLHRS w/ right side fuel fill (except 05-07 FLHRS); repl. OEM #s 75127-02, 75127-02A, 75127-02B, 75127-02C, 75127-06 1009-0213 For 00-07 FLHT/FLHX/FLTR w/ center fuel fill; repl. OEM #s 75126-00, 75126-00A, 75126-00B, 75126-02,75126-02A, 75126-02B, 75126-02C, 75126-06, 75126-06A 1009-0221 For 08-17 Softail; repl. OEM #s 75284-08,75284-08A 1009-0214 For 01-07 Softail (except FXSTD); repl. OEM #s 75132-01,75132-01A, 75132-01B, 75132-01C, 75132-01D, 75132-06 1009-0220 For 09-17 FXD/FXDWG, 12-16 FLD; repl. OEM #s 75218-04D, 75219-09 1009-0215 For 04-08 Dyna; repl. OEM #s 75218-04D, 75219-04 1009-0222 For 07-22 XL (except RH Sportster); repl. OEM #s 75284-08, 75284-08A FUEL PUMP MODULE KITS • Complete assembled module makes installation easier and cleaner and saves time • Designed, built and verified to meet or exceed OEM standards • Pump draws the same current as the OEM unit, ensuring the replacement pump will not throw error codes • Restores lost performance • Includes sending unit, regulator, fuel filter, O-ring kit to reseal dry break connector, replacement fuel line from quick connector to the module, tank gasket, hardware (including seals) and locking ring when applicable • Twin Cam kits include a wiring harness to update the connector to late model version allowing fitmets on early and late models 1009-0222 PART NO. DESCRIPTION EMIS* 1010-3200 For 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX 2 STEALTH AIR CLEANER KIT • Stealth intake provides 38 percent increase in flow • High-strength synthetic polymer backplate is designed to reduce heat transfer to intake air • Cooler, denser air allows for more efficient cylinder fill and better performance • Easy installation • Washable filter element • Comes with a Lava Chrome teardrop cover which is a smoky chrome with all the reflective qualities of traditional chromium PART NO. DESCRIPTION EMIS* 1010-3201 For 24 FLHX/FLTRX, 23-24 FLHXSE/FLTRXSE 2 SUPER STOCK™ STEALTH AIR CLEANER KIT • For stock and S&S fuel system applications • Kit includes backing plate, filter and hardware • Built-in stinger cone directs air smoothly into the bore of the EFI throttle body and reduces turbulence and increases flow • Outer cover sold separately; see the 2025 Drag Specialties FatBook for cover options • Made in the U.S.A. 6 FEBRUARY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART NO. DESCRIPTION EMIS* FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE 1010-3293 Chrome 2 1010-3292 Black contrast 2 1010-3294 Black wrinkle 2 1010-3292 1010-3293 1010-3294 VO2 X AIR INTAKE KITS • Extracts the maximum performance from any machine by utilizing the K&N® Xstream high-flow air filter • CNC-machined billet outer cover with stainless ARP hardware • Made in the U.S.A. PART # DESCRIPTION EMIS* FOR 23-24 FLHXSE/ FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE 1010-3290 Chrome 2 1010-3291 Matte black 2 VO2 AMERICA AIR INTAKE KITS • Crowned with a bold CNC-machined billet aluminum outer cover adorned with the stars & stripes and bolted down with ARP hardware • Force™ Velocity Stack with maximum flow and ease of installation • High flow washable air filter • Include mounting hardware and installation instructions • Made in the U.S.A. 1010-3290 1010-3291 PART # DESCRIPTION EMIS* FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE 1010-3288 Chrome 2 1010-3289 Black contrast 2 1010-3287 Wrinkle black 2 VO2 INSIGHT AIR INTAKE KITS • CNC-machined billet outer cover • Integrated polycarbonate filter top with embossed Vance & Hines logo • ARP hardware • High capacity washable air filter element • Force™ velocity stack • Available in chrome, black contrast, or wrinkle black finish PART # DESCRIPTION 2110-1332 For 86-88 FLT/FXR 2110-1333 For 83-85 FLT/FXR 2110-1331 For 81-82 FLT/FXR STARTER HOUSING DRIVES • Direct replacement for the OEM starter drive housing • Durable construction 1010-3288 1010-3287 1010-3289 2110-1331 7 DRAGSPECIALTIES.COM FEBRUARY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FRONT BRAWLER KITS 0506-2364 For 14-23 FLHT/FLHR/FLHX/FLTRX 0506-2366 For 18-24 Softail w/ mid controls (except FXDR/FXDRS) REAR BRAWLER KITS 0506-2365 For 14-23 FLHT/FLHR/FLHX/FLTRX BRAWLER KITS • Designed to grind down during impacts to prevent bike from catching and flipping • Functions as a highway bar for a secure grip and comfortable footrest on long rides • Durable materials ensure strong defense against damage during stunts or everyday use. Safeguards your investment and reduces potential repair costs • Balances performance with style, suited for both aggressive riding and extended journey • Front and rear kits sold separately • ST-Style saddlebag adapter kit designed for seamless integration of the Brawler Kit when using ST-style bags and ensures optimal fitment, providing a smooth and hassle-free installation NOTE: Due to interference from water cooling lines, the Brawler Kit does not fit Twin-Cooled touring models. NOTE: For 09-13 Road Glide models, the Brawler Kit does not integrate with the original lower fairing support brackets. Installation requires fabrication of new lower fairing support brackets (not included). 0506-2366 0506-2364 PART # DESCRIPTION 0214-3156 For 09-24 FLHT/FLHX/FLHR/FLTRX AXLE ADJUSTER WITH INTEGRAL SHOCK RELOCATOR KIT • Kit features 6061 billet aluminum adjusters with dual locking nuts, a stainless steel 36 mm hex axle nut and a nickel-plated chromoly tubular axle • Provides complete full axle adjustment within factory swingarm slot range • Features graduation marks for precise alignment • Integral shock relocation feature provides for both a stock shock location and a plus 1” location for taller shock position; this relocator component increases ride height, enabling rider to utilize a standard 13” shock • Kit also includes a spool feature that allows for use of a pit jack on competition bikes • Made in the U.S.A. PART # DESCRIPTION FOR 08-23 FLHR/FLHT/FLHX/FLTR, 18-24 M-EIGHT SOFTAIL, 06-17 V-ROD 1701-0796 Left, black anodized bore caps 1701-0797 Left, clear anodized bore caps 1701-0798 Right, black anodized bore caps 1701-0799 Right, clear anodized bore caps RACE SERIES MONOBLOC FRONT CALIPERS • Made from a single piece of solid billet aluminum • Four large diameter pistons are combined with an extra rigid differential bore monobloc design • Includes brake pads • Provides a staggering 20% increase in stopping power over OEM units • Black anodized bodies with black anodized or clear anodized bore caps • Laser engraved Performance Machine logo • Compatible with ABS or non-ABS systems • Designed for 11.8” (300 mm) rotors • Made in the U.S.A. NOTE: For 15-23 Road Glide models, (except 18-22 FLTRXSE CVO Road Glide, 21-23 FLTRXS Road Glide Special and 22-23 FLTRXST Road Glide ST), installation requires new lower fairing support bracketry because the Brawler Kit does not integrate with the original lower fairing support brackets. A singular fairing support bracket is recommended (not included), H-D PART #47200354 and any necessary hardware. NOTE: Front chin spoiler on some models may need to be removed or replaced with an oil cooler cover to install the Brawler Kit. 1701-0796 1701-0799 0506-2365 PART # DESCRIPTION REAR BRAWLER KITS (CONT) 0506-2367 For 18-24 Softail w/ mid controls (except FXDR/FXDRS) ST-STYLE SADDLEBAG ADAPTER KIT 0506-2368 For 18-24 Softail 8 FEBRUARY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
ARLEN NESS Family owned since 1970, Arlen Ness has more than 50 years of experience in engineering, creating, testing and delivering the best quality motorcycle parts and accessories available. From simple upgrades like footpegs and grips to custom wheels, air cleaner kits and more, their passion for motorcycles shows in every part you put on your bike. PART # DESCRIPTION M-EIGHT SOFTAIL/ELW/PAN AMERICA DRIVER FOOTPEGS (PR.) 1620-26721 Chrome 1620-26711 Black M-EIGHT SOFTAIL/ELW/PAN AMERICA PASSENGER FOOTPEGS (PR.) 1620-26741 Chrome 1620-26731 Black PART # DESCRIPTION MALE MOUNT FOOTPEGS (PR.) 1620-26702 Chrome 1620-26692 Black 1620-26752 Gold 1620-26762 Red DIAMOND FOOTPEGS • Diamond footpegs feature a diamond rubber pattern with integrated knurling inside each diamond shaped pocket for great foot traction • CNC-machined billet aluminum end caps with laser-engraved Arlen Ness logo • Forged clevis and internal structure for optimum strength • Reduced shorty length for increased ground clearance • 4.56” L overall • Matching Diamond grips are available separately NOTE: See the 2024 Drag Specialties FatBook for an explanation of footpeg mount styles. 1620-2672 1620-2673 1620-2675 1620-2676 PART # DESCRIPTION FOR 18-24 FXBR/FXBRS/FLSB 1610-0705 Chrome; repl. OEM #s 50600209, 50600223 1610-0706 Gloss black BRAKE PEDALS • Direct replacement for the stock brake pedal • Steel construction with a chrome or gloss black finish • Rubber brake pedal pad included 1610-0705 1610-0706 PART # DESCRIPTION 8° RAKE 2001-2935 Mariah, chrome (3-1/8” L (top), 2” L (bottom) 2001-2937 Mariah, black (41-1/16” L (top), 2” L (bottom) 10° RAKE 2001-2938 Bradley, chrome (3-1/2” L (top), 2” L (bottom) 2001-2939 Bradley, black (3-1/2” L (top), 2” L (bottom) 2001-2940 Mariah, chrome (5” L (top w/ traditional rounded visor), 2” L (bottom) 2001-2941 Mariah, black (5” L (top w/ traditional rounded visor), 2” L (bottom) 7” HEADLIGHT BEZELS FOR RAKED BIKES • Brings the headlight back down to level when using a frame rake kit, raked trees, or wheel larger than stock • Mounts against stock nacelles or fairings using supplied hardware • Made specifically for 8° or 10° bike rakes • Size, style and color vary (see chart) • Screw-in bezel with locking screw • Made from 6061-T6 billet aluminum • Made in the U.S.A. 2001-2938 2001-2941 1 Forged aluminum clevis. 2 Forged steel clevis. FOR 94-24 FLHR/FLHRXS, 95-24 FLHT/FLHX (EXCEPT 23-24 FLHXSE, 24 FLHX 9 DRAGSPECIALTIES.COM FEBRUARY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 2001-2833 For 22-24 FXLRST, 22 FXRST SHARK DEMON® 2 PERFORMANCE HEADLIGHT • Specialized high-performance LED headlights designed for motorcycle use • Durable polycarbonate lens with IP67 waterproofing • 5800 to 6500K daylight color temperature • Low beam has 3 projection LEDs; 3600 raw lm/2651 effective lumens • High beam has 4 direct-reflective LEDs: 9080 raw lm/4485 effective lumens • Low beam stays on while high beam is engaged • Comes with a 3 mm 304 stainless steel mounting bracket and mounting hardware • Plug-and-play installation • DOT and SAE compliant • Engineered in the U.S.A. PART # DESCRIPTION FOR 14-24 FLHR/FLHT/FLHX/FLTR 2040-3200 Chrome 2040-3199 Black FILLERZ FENDER SUPPORT BOLT COVERS • Compatible with Custom Dynamics ProBEAM® Fillerz Saddlebag LED lights PART #s 2040-2156, 2040-2157, 2040-2158, 2040-2159, 2040-3180, 2040-3182, 2040-2183, 2040-3183 (sold separately) • Covers exposed rear fender support bolts • Installs between saddlebag support and Fillerz LED light with double-sided tape • Sold in pairs PART # DESCRIPTION FOR 09-23 FLHTCUTG, 10-11 FLHXXX (EXCEPT FOR INTERNATIONAL OR CVO) 2010-1525 Light smoke lens 2010-1526 Red lens TAILLIGHTS FOR TRI GLIDE • Distinctive design looks great on or off • Features ultra-bright run, turn and brake lights • Unique start-up animation • No visible fasteners • Includes both chrome and black trim pieces • Available with a red or light smoke lens • Plug-and-play installation • Sold in pairs PART # DESCRIPTION FOR 24 FLHTK/FLTRK/FLHRXS (EXCEPT 23 FLHXSE/FLTRXSE), 08-23 FLHR/ FLHT/FLHX/FLTR (EXCEPT 23 FLHXSE/FLTRXSE), 09-24 FLHTCUTG/FLRT/FLTRT, 18-24 SOFTAIL 0630-3236 Chrome 0630-3238 Black PART # DESCRIPTION FOR 84-99 BIG TWIN, 99-07 FLHR/FLHT/FLHX/FLTR (EXCEPT MODELS W/ AIR RESERVOIR), 99-17 SOFTAIL, 99-07 DYNA AND 86-22 XL (EXCEPT THROTTLEBY-WIRE MODELS) 0630-3237 Chrome 0630-3239 Black CHICANE™ GRIPS • Give superior feeling of control and vibration damping in a cool looking package • Aluminum construction and stainless steel hardware • Metal cage surrounds EPDM rubber pads over a polymer base • Super durable for years of excellent performance • Works with the Chicane™ Throttle Wing (sold separately) • Matches the line of Ciro® Chicane™ products • Fits 1” handlebars with dual-cable setups • Sold as a pair 2040-3199 2040-3200 2010-1526 2010-1525 0630-3238 0630-3237 10 FEBRUARY 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
DESCRIPTION PART # For 20-24 FLTRK, 15-23 FLTRX (except 23 FLTRXSE), 16-19 FLTRU 4405-09911 For 14-24 FLHTK, 14-23 FLHX (except 23 FLHXSE), 14-19 FLHTCU 4405-1014 800-WATT AMP/SPEAKER KIT WITH CUT-IN LID ADAPTORS • Kit includes: 2 - 400-watt amplifiers, pair of 200-watt 6-1/ 2” front speakers that blend seamlessly into fairing, and a pair of 300-watt, 6” x 9” speakers that mount in existing saddle bag lids • Dual WBA 400.2r amplifiers are designed to fit seamlessly inside the inner fairing • Pre-tuned to the factory radio for a straightforward installation process • Ensures compatibility and safety with your bike’s charging system • Comes with all necessary hardware and wiring • Includes a plug-and-play wire harness that allows the radios fader to function • All required wiring and hardware included NOTE: May require a radio software reflash. PART # DESCRIPTION 3502-0750 Tank bag TANK BAG • Attaches to steel gas tanks with four high-strength magnets • Touchscreen capable phone sleeve with charging cord access • Interior pocket and elastic base-straps keep goods secure • Structured lid with hook-and-loop closure • 1680D ballistic nylon construction • Includes rain cover and clear protective stickers for tank mounting locations • 3.5 L total capacity • Dimensions: 6” W x 9” H x 4” D PART # DESCRIPTION 3510-0190 Waterproof handlebar bag WATERPROOF HANDLEBAR BAG • TPU welded construction • Airtight waterproof zipper • MOLLE webbing for attachment to handlebars or risers • 3 L total capacity • Dimensions: 9” L x 3.5” W x 6” H 4405-0991 4405-1014 1 Black trim and chrome trim front speaker grilles included. 11 DRAGSPECIALTIES.COM FEBRUARY 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
RkJQdWJsaXNoZXIy NDI5NTY=