PART # DESCRIPTION EMIS* 1800-2723 For 17-24 FLHT/FLHR/FLHX/FLTRX/FLTRU 1 SIDEWINDER LAVA CHROME 2-INTO-1 EXHAUST SYSTEM • Features the mirror finish of traditional chromium combined with a smoky radiance that produces a unique dark look that is still reflective • Finish is durable and easy to clean • Stainless steel stepped header pipes • Machined aluminum end cap • Includes adapters that allow use of wide band or stock O2 sensors • Increased power and torque • Deep performance exhaust note • Made in the U.S.A. PART # DESCRIPTION EMIS* 1801-1836 For 21-24 RH1250S 2 GRAND NATIONAL 4” OD SLIP-ON MUFFLERS • Brushed stainless steel finish • 4” OD muffler bodies • Grand National Thruster machined end caps • Removable dB reducer (J2825 compliant) • Sold in pairs • Made in the U.S.A. NOTE: Qualified Manufacturer Declared 49-state emissions compliant part for 21-24 Sportster RH1250 models. PART # # OF TEETH REPL. OEM # DESCRIPTION 1” W 1204-0249 137 teeth 40024-07, 40591-07 For 07-08 FLHT/FLHR/FLHX/FLTR (domestic); 11-17 XL883/XL1200 and 09-12 XR1200 (domestic/international) 1204-0247 133 teeth 40058-07 For 07-11 FLST/FLSTC/FLSTN, FLSTSC, FXSTD, FXCW/C, FXS (domestic/international) 1204-0246 131 teeth 40046-07 For 07-17 FXD/FXDWG (domestic) 1204-0248 136 teeth 40371-07, 40056-07 For 07-10 XL883 (domestic/international); 07 FLHT/FLHR/FLHX/FLTR (Japan) 20 MM 1204-0251 133 teeth 40073-07 For 07-11 FLSTF/FLSTSB, FXST/FXSTB/FXSTC (domestic/international) 24 MM 1204-0254 140 teeth 40024-09A For 09-17 FLHT/FLHX/FLTRU/FLHR 1204-0253 134 teeth 400000018 For 18-22 Softail 1204-0252 133 teeth 400000001 For 12-17 Softail (except FXSB/SE) HIGH-STRENGTH FINAL DRIVE BELTS • Available with 14 mm pitch and 1”, 20 mm and 24 mm widths • Made of super-strong Gates Carbon X3N material • Made in the U.S.A. 1204-0249 THE DRAG SPECIALTIES MARCH 2025 DRAGSPECIALTIES.COM MARCH 2025 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 4405-1015 For 14-24 FLHTCU/FLTRU/FLTRK, 14-23 FLHX/FLTRX (except 23 FLHXSE/FLTRXSE) RETRO LID KIT • Well thought out design radically reduces standing water on speakers when parked • Easily add 6” x 9” speakers to your lids without need for paint • Properly designed kit has speakers pointing towards the rider for optimal sound • More of the speaker is exposed than current offerings ensuring maximum sound potential • Sleek design follows lines of bike much better than current offerings • 1 mm thick “boot worthy” grill mesh • Supplied template makes cutting lids much easier than current offerings. • Upgraded wire harness covered in “Nyla braid” with custom inline grommet for bags PART # DESCRIPTION FOR 24 FLTRX/FLHX/FLTRXSTSE, 23-24 FLTRXSE/FLHXSE 3501-2130 Black PART # DESCRIPTION FOR 24 FLTRX/FLHX/FLTRXSTSE, 23-24 FLTRXSE/FLHXSE (CONT) 3501-2129 Black w/ gunmetal stitching SADDLEBAG LID COVERS • Protect your saddlebag lids from scratches and marks • Form-fitting vinyl construction • Sold in pairs • Made in the U.S.A. 3501-2129 3501-2130 PART # DESCRIPTION EMIS* FOR 24 FLI, 18-24 FLHC/FLHCS 1801-1837 Black 2 PART # DESCRIPTION EMIS* FOR 17-24 FLRT, 23-24 FLTRT 1801-1838 Black 4 3” TWIN SLASH SLIP-ON MUFFLERS • PCX™ (Power Chamber Exhaust) technology • Chambered high-flow catalyst cartridge designed to increase torque • Full coverage heat shields • Available in matched textured black • Sold in pairs • Made in the U.S.A. 4” TWIN SLASH SLIP-ON MUFFLERS • Signature twin slash end treatment • Available in matte black • Optional quiet inserts • Sold in pairs • Made in the U.S.A. • Includes adapters with grills, cutting templates, wiring, and all required hardware to complete the installation NOTE: Can not be installed on saddlebags with power lock option. 2 MARCH 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
DRAG SPECIALTIES SEATS Give your bike a luxurious look and yourself more comfort with a Predator III seat from Drag Specialties Seats. Made by hand using the finest materials, these seats are proudly made in the U.S.A. to the highest standards to ensure a quality, long-lasting seat that provides mile after mile of comfort. PART # DESCRIPTION 0801-1922 Smooth vinyl 0801-1923 Double diamond, black vinyl 0801-1924 Double diamond, silver vinyl PART # DESCRIPTION 0801-1925 Double diamond, red vinyl 0801-1926 Smooth, solar-reflective leather EXTENDED REACH PREDATOR III 2-UP SEATS • High-quality automotive-grade vinyl cover • Extended reach is 1.5” back on stock FLHR and 1.0” back on FLTRX Road Glide and FLHX Street Glide when measured against stock • PART #0801-1926 features solar-reflective leather in the seating area and automotive-grade vinyl on the sides • Features a 61/ 4” tall driver support with unique styling • Molded polyurethane foam for maximum comfort and styling • Seat is made narrow up front for better leg clearance • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Fits with all Drag and most H-D sissy bars FOR 24 FLHTK/FLTRK/FLHRXS, 08-23 FLHT/FLHX/FLHR/FLTR (EXCEPT 23 FLHXSE/FLTRXSE), 09-24 FLHTCUTG; 30.5” L OVERALL (11.5” W FRONT) (9” W REAR) PART # DESCRIPTION 0801-1916 Smooth vinyl 0801-1918 Double diamond, black vinyl 0801-1919 Double diamond, silver vinyl PART # DESCRIPTION 0801-1920 Double diamond, red vinyl 0801-1921 Smooth, solar-reflective leather PREDATOR III SEATS • Features a 6.5” tall driver support with unique styling • High-quality automotive-grade vinyl cover • Molded polyurethane foam for maximum comfort and styling • PART #0801-1921 features solar-reflective leather in the seating area and automotive-grade vinyl on the sides • Seat is made narrow up front for better leg clearance • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Fits with all Drag and most H-D sissy bars FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE; 30” L OVERALL (12” W FRONT) (6” W REAR) 0801-1916 0801-1918 0801-1919 0801-1920 0801-1921 0801-1922 0801-1923 0801-1924 0801-1926 0801-1925 3 DRAGSPECIALTIES.COM MARCH 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
SADDLEMEN® A Saddlemen® seat instantly adds a touch of show-bike looks and quality. The premium materials, beautiful styling and premium fit add up to a true custom seat that looks great and feels great on the road. The Knuckle Solo and Renegade Solo style seats are now available for the latest Touring bike models. PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 0801-1701 Black 0801-1702 Black LS 0801-1703 Brown LS RENEGADE SOLO SEATS • Purpose-built on Saddlemen’s® slammed solo seat chassis with show-bike looks and quality • Seat shape and contours have been carefully developed to create a clean look that is uncluttered by excessive seams • LS seats feature popular lattice stitch (LS) retro styling • Saddlemen’s ProFoam is formulated to provide a perfect balance of comfort and rigidity and user compliance with integrated GelCore™ technology • Easy to install – just like the bike’s original seat • Made in the U.S.A. PART # DESCRIPTION 0801-1704 For 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE RENEGADE KNUCKLE SOLO SEAT • Audacious new custom seat from Saddlemen®, with a brash refinement that instantly transforms your bike • Deep, aggressive ribs are carefully stitched into the SaddleHyde™ weather-resistant cover while hand-crafted progressive-density foam and GelCore™ foundation serve up comfort not normally present in a low-profile seat • Strong plastic-injected pans with plated hardware ensure a perfect fit for a trouble-free install • Made in the U.S.A. 0801-1701 0801-1703 PART # DESCRIPTION EMIS* 1010-3209 Chrome 1 1010-3208 Black anodized 1 1010-3210 Black anodized w/ machined accents 1 PART # DESCRIPTION EMIS* 1010-3213 Blue anodized 1 1010-3211 Gold anodized 1 1010-3212 Red anodized 1 STAGE 2 OVAL PERFORMANCE UPGRADE AIR FILTER KITS • For factory oval H-D air cleaners • Increase performance and add style to the engine • Feature a performance filter with a pleated top to take in air from the sides and top of the filter for maximum airflow • Filter cover, spacers and clamps are all CNC machined from billet aluminum • Performance air filter is made from high-flow black pre-oiled cotton media • Increased filter height specially designed to increase airflow without reducing leg room • Over 50% more air filter surface area than paper filters found in factory oval air cleaners • Each filter kit includes a performance filter, billet air cleaner cover, billet spacers and clamps FOR OVAL SCREAMING EAGLE® VENTILATOR® AIR CLEANERS AND M-EIGHT SPECIAL/ST MODELS EQUIPPED W/ H-D OVAL VENTILATOR AIR CLEANER BACKING PLATES NOTE: Does not include backing plate. Requires OEM/H-D Ventilator® oval backing plate. 1010-3209 1010-3208 1010-3210 1010-3213 1010-3212 1010-3211 4 MARCH 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 1003-2033 Replacement float for HSR42/45/48 carburetors REPLACEMENT FLOAT FOR MIKUNI HSR42/45/48 CARBURETORS • Genuine Mikuni replacement float PART # DESCRIPTION FOR 03-05 DYNA 1106-0257 1.331” PART # DESCRIPTION FOR 70-99 BIG TWIN (EXCEPT TWIN CAM) 1106-0256 0.672” MOTOR SPROCKET SHAFT SPACERS • Made out of 4140 U.S.A. steel to OEM specifications • Sold each • Made in the U.S.A. PISTON KIT PART # DESCRIPTION BORE SIZE PISTON SIZE OVERSIZE COMPRESSION RATIO STROKE CC DOME VOLUME FOR 17-22 M-EIGHT 0910-6681 107” 3.937 3.934 STD 11.0:1 4.375 3.92 0910-6683 117” 4.125 4.122 0.188 11.0:1 4.375 -4.40 0910-6684 119” 4.155 4.152 0.218 11.0:1 4.375 -5.97 0910-6682 114” CVO 4.016 4.013 0.079 11.0:1 4.500 0.40 0910-6685 120” CVO 4.125 4.122 0.188 11.0:1 4.500 -7.10 PISTON KITS • Forged from aerospace-grade aluminum alloys and heat-treated for strength and durability using Wossner’s state-of-the-art heat treatment process • CNC-machined using MAZAK® advanced technology maintaining high precision and accuracy through every machining step • Reduced product distortion and variability • Enhanced piston pin oiling slots, radial boss machining and annular grooves for improved wrist pin lubrication • Piston skirt profile and camming are specifically tailored to each application for reduced friction, smooth operation and reduced noise from rockover • Piston skirts are coated for reduced friction and improved break in performance • Select applications have coating treatments to protect from harsh tuning environments • Piston rings are made from premium alloy steel and feature treatments to improve ring seal and extend wear life • Kits include pistons, piston rings, piston pins and retaining clips 1106-0256 1106-0257 5 DRAGSPECIALTIES.COM MARCH 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION EMIS* 0925-1609 487 chain drive cam 3 PART # DESCRIPTION EMIS* 0925-1608 618 F chain drive cam 3 CAM SPECS MEASURED IN THE ENGINE ON THE LIFTER @ 0.050” USING A 1.61 ROCKER ARM RATIO GRIND VALVE LIFT OPEN CLOSE DURATION @ 0.053” LIFT @ TDC LOBE CENTERLINE 487 Intake 0.478 20.5° 37° 237° 0.180” 98.5° Exhaust 0.487 44° 17.5° 241.5° 0.146” 103.25° 618 F Intake 0.608 20° 42° 242° 0.195” 101° Exhaust 0.618 65° 19° 264° 0.170” 113° REAPER® CAMS FOR 17-24 M-EIGHT MOTORS • Produce more power and torque in the riding rpm range, improving throttle response, acceleration and fuel mileage • Smooth camshaft lobe ramps are easier on valvetrain components and eliminate excessive valvetrain noise and wear • Dyno proven and track tested • Made in the U.S.A. 487 CAM • 487 Reaper® CHOP is a great all-around camshaft and Feuling’s® go to for 41/ 2 stroke 114” and 117” looking for an aggressive bolt-in • Has that nasty CHOP idle sound while producing a wide powerband that the Feuling cams are known for • Responds very well to increased bore and/or compression, exhaust system and air cleaner • Use of performance valve springs is not required but may result in a quieter, smoother running valve train; see PART #s 0926-2973 or 0926-2974 in the 2024 Drag Specialties FatBook NOTE: 618 F Cam requires high lift/high load valve springs (see PART #0926-3138 in the 2024 Drag Specialties FatBook) and heavy-duty pushrods (see PART #09280091 in the Drag Specialties FatBook). Clearances must be checked when installing this cam. NOTE: Due to the unstable nature of this 4-valve engine design with one rocker arm activating two valve springs, Feuling highly recommends running one-piece pushrods over quick-install adjustable pushrods to maintain maximum cam/valve lift and reduce valvetrain harmonics and associated hydraulic lifter issues. NOTE: Feuling fastener kit PART #2401-0994 also highly recommended to help prevent cylinder head cracking; kit replaces the rocker shaft bolts with studs and nuts to help reduce the stress of the rocker shaft standoffs. NOTE: Not for 2023-2024 models with 121” VVT motors. 618 F CAM • Requires large bore size, ported cylinder heads, ported intake manifold, high flow valves and a large throttle body • Aggressive camshaft requires high lift/high load valve springs, performance pushrods and lifters • High-flow air cleaner and triple stepped exhaust pipe are highly recommended • Feuling also recommends matching this cam with Race Series® oiling system PART #s 0932-0199 or 0932-0218 are in the 2025 Drag Specialties FatBook • 3100 to 6650 rpm range PART # DESCRIPTION 0925-1613 For 17-24 M-Eight HYDRAULIC CAM CHAIN TENSIONER KIT • Allows engine builders to install or replace the hydraulic cam chain system on most 17-24 M-Eight models • Includes outer roller chain PART #0925-0954, 17-tooth crankshaft cam drive sprocket PART #0925-1058, hydraulic cam chain tensioner pad PART #0925-1612 and camshaft sprocket spacing alignment/thrust washer kit PART #0925-0951 • Will also work with a combination of factory, SE or S&S® cam plate systems NOTE: Included camshaft sprocket spacing alignment/thrust washer kit PART #0925-0951 will NOT fit 2023-2024 models with 121” VVT motors. PART # DESCRIPTION 0925-1607 For 17-24 M-Eight; repl. OEM #25500013 HYDRAULIC CAM CHAIN TENSIONER ASSEMBLY • Tensioner housings are precision machined from billet 6061 aluminum, pads are injection-molded nylon with PTFE added to increase wear and friction resistance • Single piston design duplicating the output pressure of stock units • Include ARP® 12-point hardware • Sold each • Made in the U.S.A. PART # DESCRIPTION 0925-1612 For 17-24 M-Eight HYDRAULIC CAM CHAIN TENSIONER PAD • Injection molded Nylon with PTFE added to increase wear and friction resistance • Includes chain tensioner pad and pin • Works with factory aluminum housing and hydraulic unit • Sold each • Made in the U.S.A. 6 MARCH 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 1107-0742 For 24 FLHTK/FLTRK/FLHRXS, 17-23 Touring (except 23 CVO) and 18-24 Softail NXL POINT COVER • Ultra high end performance covers • Made from black anodized CNC-machined billet aluminum with brushed stainless steel cover • Comes in a kit and includes all hardware • Aluminum base and stainless covers are easy to customize • Matching floorboards, mini boards, shifter pegs and point cover available PART # DESCRIPTION 1107-0740 For 17-24 Touring 1107-0741 For 18-24 Softail NXL DERBY COVERS • Ultra high end performance covers • Made from black anodized CNCmachined billet aluminum with brushed stainless steel cover • Comes in a kit and includes all hardware • Aluminum base and stainless cover are easy to customize • Matching floorboards, mini boards, shifter pegs and point cover available separately PART # DESCRIPTION 2112-1848 For 14-22 XL (except RH Sportster); repl. OEM #29900026 STATOR • Designed for direct OEM replacement • Made in the U.S.A. 1107-0741 PART # DESCRIPTION FOR 09-24 FLHR/FLHT/FLHX/FLTR 1620-2664 Chrome 1620-2666 Chrome, extended length PART # DESCRIPTION FOR 09-24 FLHR/FLHT/FLHX/FLTR (CONT) 1620-2665 Black 1620-2667 Black, extended length FRAME-MOUNTED HIGHWAY PEG MOUNT KITS • Perfect solution to the challenge of adding comfortable highway pegs on a bike with driver floorboards • Replaces front footboard mount without reducing ground clearance • Extended length mounts are 11/ 4” longer • Fully adjustable design • Accept most male-mount footpegs (sold separately) • Complete with hardware • Sold in pairs U.S. Design Patent #D811,947. 1620-2664 1620-2667 KODLIN OVAL AIR CLEANER KODLIN OVAL AIR CLEANER FOR HD MILWAUKEE 8 MODELS • CNC machined from billet aluminum • Chrome or Black finish • High Performance washable K&N air filter for up to 50% more airflow • Clean look with hidden bolts design • Fits 2017-2024 M8 Touring (except CVO) and 2018-2024 M8 Softail models PART NO. DESCRIPTION COLOUR 1010-3199 Oval Air Cleaner Milwaukee 8 Chrome 1010-3198 Oval Air Cleaner Milwaukee 8 Black 7 DRAGSPECIALTIES.COM MARCH 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 15-23 FLTRX/FLTRXS, 22-23 FLTRXST/FLTRKSE, 20-24 FLTRK, 18-22 FLTRXSE, 16-19 FLTRU, 20-22 FLTRUSE, 23-24 FLTRT 2040-3231 Chrome 2040-3230 Gloss black DRL CENTER WINDSHIELD TRIMS • Forward facing solid white running light • Two banks of 18 bright white LEDs are set behind a smoked lens • Adds forward visibility to the front lower edge of windshield • Durable metal housing in a chrome or gloss black finish attaches to windshield • Plug-and-play installation PART # DESCRIPTION 2040-3229 For 22-24 FXLRST, 22 FXRST FAIRING VENT LIGHTS • Fill the voids in the OEM FXLRST fairing • Single row of dual color LEDs and black mesh • 18 LEDs border each edge providing bright white light with contrasting amber turn signals • Plug-and-play harness PART # DESCRIPTION FOR 22-24 FXLRST, 22 FXRST 2040-3241 Amber PART # DESCRIPTION FOR 22-24 FXLRST, 22 FXRST (CONT) 2040-3242 Smoked FORK REFLECTOR LIGHTS • Upgrades fork reflectors to dual-intensity LED lights • Amber LEDs with dual-intensity running light and turn signal illumination • Amber or smoke lens with gloss black housing • Plug-and-play 2040-3242 2040-3241 PART # DESCRIPTION 2020-2215 For 15-23 FLTRX/FLTRXS, 22-23 FLTRXST/FLTRKSE, 20-24 FLTRK, 18-22 FLTRXSE, 16-19 FLTRU, 20-22 FLTRUSE and 23-24 FLTRT SHARK DEMON® LED FRONT TURN SIGNALS FOR ROAD GLIDE • High-performance LED front turn signals • Aggressive styled housing in a gloss black finish • Yellow faceted lens offers dual-intensity yellow running light and full-contrast turn signal flash • Plug-and Play • DOT compliant • Sold in pairs PART # DESCRIPTION 2050-0546 Add-on Tour-Pak® Smart Triple Play® module ADD ON TOUR-PAK® SMART TRIPLE PLAY® MODULE • Converts add-on Tour-Pak® lighting to run/turn/ brake signals • Built in brake flash and strobe patterns to add even more rear visibility • Does not impact rear fender light operations • Plug-and-play when used with Custom Dynamics® Tour-Pak Quick Disconnect Harnesses PART #s 2120-1361, 2130-0267, 20500384 or 2050-0386 (sold separately) NOTE: Recommended for use with Custom Dynamics® ProBEAM® LED King Tour-Pak® Lamps PART #s 2040-2808, 2040-2809, 2040-3140 or 2040-3141 (sold separately). 2040-3230 2040-3231 8 MARCH 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
CHROME PART # BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 14-23 FLHT/FLHX (EXCEPT 23 FLHXSE) (1” CLAMPING AREA) 0601-6504 - 8” 36” 15” 9” 0601-6506 - 10” 36” 15” 9” 0601-6509 0601-6508 12” 36” 15” 9” 0601-6511 0601-6510 14” 36” 15” 9” 11/ 4” PRE-WIRED MONKEY BAGGER HANDLEBARS • Monkey bars with aggressive performance and styling • Engineered to provide a natural, relaxed grip angle • Extra pullback for increased neck and back comfort • Include internal wiring PART # DESCRIPTION FOR 24 FLHX/FLTRX, 23-24 FLHXSE/FLTRXSE 1401-1063 Chrome license plate frame w/ Thunder Pod taillights 1401-1065 Chrome license plate frame w/ Thunder Bolt taillights PART # DESCRIPTION FOR 24 FLHX/FLTRX, 23-24 FLHXSE/FLTRXSE CONT 1401-1062 Black license plate frame w/ Thunder Pod taillights 1401-1064 Black license plate frame w/ Thunder Bolt taillights SHORT SPORT SS REAR FENDERS • Aggressive styling with killer side profile • Short length for increased ground clearance • 3-D molded, hand-laid composite material • Integrated black or chrome license plate frame with LED plate lighting • Available with Thunder Pod or, Thunder Bolt lighting kits • Bolt-on installation • Raw finish, ready for paint • Made in the U.S.A. 1401-1062 1401-1063 0601-6510 0601-6504 9 DRAGSPECIALTIES.COM MARCH 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
DESCRIPTION PART # CUSTOM CONTOUR (1.45” OD) Chrome 0630-3325 Black anodized 0630-3326 DESCRIPTION PART # DIAMOND CONTOUR (1.5” OD) Chrome 0630-3333 Black anodized 0630-3334 CONTOUR GRIPS • Contoured design feel right in your hands • Very soft serrated or diamond texture rubber sleeves • 6061 billet aluminum end caps and collars • Fit 1” handlebars • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION SMALL 1 3/8” DIAMETER 0630-3327 Chrome 0630-3328 Black anodized MEDIUM 1 1/ 2” DIAMETER 0630-3329 Chrome PART # DESCRIPTION MEDIUM 1 1/ 2” DIAMETER (CONT) 0630-3330 Black anodized LARGE 1 5/ 8” DIAMETER 0630-3331 Chrome 0630-3332 Black anodized MEMORY FOAM GRIPS • The softest, most durable, chemical resistant grips on the market today • A true vibration dampening grip • Available in small, medium and large diameters for all H-D models • Chrome and black anodized aluminum ends • Sold in pairs • Made in the U.S.A. THREE-PIECE REAR ROTORS • Full-floating, CNC-machined rotors • Meticulously designed and tested to ensure maximum performance in the most extreme environments and conditions • These lug-drive rotors feature a highly advanced three-piece design: an outer friction ring, inner carrier center and a helical retaining ring that securely fastens the friction ring to the carrier center • 5 x 3.25” bolt pattern NOTE: Excluding Enforcer, Switchblade, Limited, Pan America, and V-Rod rear 0630-3334 0630-3325 0630-3332 0630-3327 PART # DESCRIPTION FOR 08-24 FLHT/FLHR/FLHX/FLTR (11.8” X 7 MM) 1710-4686 Bow-tie/9-spoke 1710-4689 Bow-tie/B-52 1710-4684 Bow-tie/Gemini 1710-4687 Crown/9-spoke 1710-4688 Crown/B-52 1710-4685 Crown/Gemini PART # DESCRIPTION FOR 00-07 FLHT/FLHR/FLHX/FLTR, 00-17 FXST/FLST/FXS/ FLS/FXD/FXDB/FXDC/FXDL/FXDF, 00-13 XL (11.5” X 6 MM) 1710-4690 Bow-tie/9-spoke 1710-4692 Bow-tie/Gemini 1710-4691 Crown/9-spoke 1710-4693 Crown/Gemini 1710-4684 1710-4686 1710-4691 1710-4693 FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 10 MARCH 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
DESCRIPTION FUEL CHROME FUEL BLACK CUT ROCKSTAR CHROME ROCKSTAR BLACK FRONT WHEELS 21” x 3.25” for 08-24 FLHT/FLHR/FLHX/FLTRX, w/o ABS - 0201-23141 - - 21” x 3.25” for 08-24 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK, w/ ABS 0201-2415 0201-24161 0201-2404 0201-24051 REAR WHEELS 18” x 5.5” for 09-24 FLHT/FLHR/FLHX /FLTRX w/ ABS - - - 0202-2192 1 24 FLHX/FLTR will require Coastal Moto 320 mm rotors PART #1710-4728 (polished) or PART #1710-4729 (stainless). MOTO FORGED ALUMINUM WHEELS • Forged hub design • Precision-machined from forged 6061-T6 aluminum • Front wheels accept lug-mounted OEM or aftermarket 14-24 FL Touring-style front floating brake rotors • Cleans up front end to see more wheel instead of blocking wheel with a full-face rotor and saves on rotor costs • All wheels include bearings and valve stems installed by Coastal Moto • Rear wheel hub accepts stock cush-drive, pulley and brake rotor • Available for ABS and non-ABS models • Each ABS wheel is equipped with an intelligent ABS bearing and are “linked-brake ready”; no ABS system reprogramming required for any size • Accept the H-D TPMS (Tire Pressure Monitoring System) • Made in the U.S.A. FUEL BLACK CUT ROCKSTAR CHROME FUEL CHROME ROCKSTAR BLACK DESCRIPTION ATLANTIC BLACK CUT ATLANTIC SOLID BLACK HURRICANE BLACK CUT LARGO CHROME LARGO BLACK 21” x 3.5” for 00-07 FLHT/FLHX/FLTRX/FLHR 0201-2259 0201-2338 0201-2452 0201-2260 0201-2449 PRECISION-CAST CUSTOM 3D FRONT WHEELS • Gives the front of the bike an updated late-model look • ”Cast” one-piece design wheels at a fraction of the cost of billet or forged wheels • Includes bearings and valve stems installed by Coastal Moto • Wheels are designed to accept custom lug-mounted Drag Specialties 11.5” rotors (PART #s 1710-3409 and 1710-3410, sold separately) • Rotors are sold each and include mounting hardware • Custom rotors allow the use of the stock style 00-07 calipers LARGO CHROME ATLANTIC BLACK CUT HURRICANE BLACK CUT LARGO BLACK ATLANTIC SOLID BLACK 11 DRAGSPECIALTIES.COM MARCH 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
RkJQdWJsaXNoZXIy NDI5NTY=