2-INTO-2 TWO-STEP CROSSOVER HEADER SYSTEMS • Enlarged interconnected headers make for improved horsepower and low-end torque • 1.75” to 1.875” high-flow 16-gauge stepped primary headers • Systems for 17-24 models feature a full 2” left side crossover and 4.5” muffler bodies with 2” inlets • Systems for 09-16 models feature an obround 1.875” crossover and 4” diameter, 16-gauge absorptive mufflers with 2” inlets and billeted tips • 2.50”, 220°, 16-gauge heat shields • Removable baffles are wrapped in stainless steel wool and high-temp fiberglass for a rich mellow tone • 18 mm and 12 mm O2 bungs welded into the primaries • Heavy-duty, AccuSeal® reaction-block header-to-muffler clamps included • Eclipse style features a proprietary, high-temperature black chrome electroplated finish • Made in the U.S.A. PART # DESCRIPTION EMIS* FOR 17-24 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK 1800-2713 Chrome w/ chrome race tip end caps 3 1800-2714 Black w/ black race tip end caps 3 1800-2711 Eclipse w/ Eclipse Edge billet tip end caps 3 1800-2712 Eclipse w/ Eclipse Klassic billet tip end caps 3 1800-2715 Eclipse w/ Eclipse race tip end caps 3 FOR 09-16 FLHT/FLHR/FLHX/FLTRX 1800-2716 Chrome w/ chrome race tip end caps 3 1800-2717 Black w/ black race tip end caps 3 1800-2718 Eclipse w/ Eclipse race tip end caps 3 1800-2711 1800-2712 1800-2714 1800-2716 1800-2718 THE DRAG SPECIALTIES APRIL 2025 DRAGSPECIALTIES.COM APRIL 2025 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
SPORT FLARE™ WINDSHIELDS • The Sport Flare™ offers radical curves and a sportier stance; it complements the lines of the new fairing with a more aggressive profile and adds stability and handling with improved air management • The patented design features “hips” at the sides that re-route air away from the rider while adding downforce to the front end to improve stability and handling compared to the stock windshield design (the stock design creates lift) • The “flip” at the top of the Flare™ kicks air up and over the rider creating cleaner, less turbulent air for the rider and passenger • Wind tunnel tested and designed for maximum performance and air management • Made of Lexan® Polycarbonate with FMR hard coating on both sides of the shield for unmatched durability • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. NOTE: The black version may not be suitable for shorter riders as it’s an opaque material. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S. And also under International Patents: 324093, 324094, 325192. KLOCK WERKS Klock Werks patented Flare™ windshields are now available for the newest performance bagger models. These windtunnel designed and tested windscreens help your bike move smoother through the air and help eliminate swirling, buffeting air around the rider at speed. PART # DESCRIPTION FOR 24 FLTRX/FLTRXSTSE, 23-24 FLTRXSE 2310-0853 10” black 2310-0854 10” clear 2310-0855 10” dark smoke 2310-0856 10” tint 2310-0856 PART # DESCRIPTION FOR 24 FLHX, 23-24 FLHXSE 2310-0857 8” black 2310-0858 8” clear PART # DESCRIPTION FOR 24 FLHX, 23-24 FLHXSE (CONT) 2310-0859 8” dark smoke 2310-0860 8” tint FLARE™ WINDSHIELDS • Wind tunnel designed and tested, the “hips” provide added downforce for stability while the “flip” at the tip directs air up and over the rider to help eliminate swirling and buffeting • Made from unmatched durability Lexan® polycarbonate with FMR hard coating on both sides of the windshield • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. NOTE: The black version may not be suitable for shorter riders as it’s an opaque material. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S And also under International Patents: 324093, 324094, 325192. 2310-0857 2310-0858 2310-0860 2310-0855 2 APRIL 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 1401-1068 For 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE CARBON FIBER 21” FAT WRAPPER FRONT FENDER • Full length front fender for 21” wide/fat tire Baggers • Features a direct bolt-on design, specially notched sides and smooth flowing body lines for contoured curves seen from every angle • 8” wide front fenders designed to fit 21” x 5.5” front wheels with 180 mm tires • Allows clearance for up to 14” oversized brake rotors NOTE: Always mount fender to check clearances prior to custom paint or road testing. PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 1623-0627 Chrome 1623-0626 Black anodized PART # DESCRIPTION FOR 00-07 FLHT/FLHR/FLHX/FLTR 1623-0628 Chrome 1623-0625 Black anodized MID-CONTROLS FOR BAGGER MODELS • Increases ground clearance for aggressive riding • Innovative control design utilizes the factory foot control mounts • Using factory foot control mounts instead of mounting to the engine allows for less vibration • Each control arm is CNC machined from billet aluminum, while the control mounts are made from CNC bent steel for durability and factory like fit • Kits include both brake and shift side control assemblies (footpegs and shift pegs are NOT included) • Accepts any male mount footpegs or H-D Big Twin shift/brake pegs • Will work with stock and most aftermarket exhaust 1623-0625 1623-0627 3 DRAGSPECIALTIES.COM APRIL 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FRONT BRAWLER KITS 0506-2364 For 14-23 FLHT/FLHR/FLHX/FLTRX 0506-2366 For 18-24 Softail w/ mid controls (except FXDR/FXDRS) REAR BRAWLER KITS 0506-2365 For 14-23 FLHT/FLHR/FLHX/FLTRX 0506-2367 For 18-24 Softail w/ mid controls (except FXDR/FXDRS) ST-STYLE SADDLEBAG ADAPTER KIT 0506-2368 For 18-24 Softail BRAWLER KITS • Designed to grind down during impacts to prevent bike from catching and flipping • Functions as a highway bar for a secure grip and comfortable footrest on long rides • Durable materials ensure strong defense against damage during stunts or everyday use • Safeguards your investment and reduces potential repair costs • Balances performance with style, suited for both aggressive riding and extended journey • Front and rear kits sold separately • ST-Style saddlebag adapter kit designed for seamless integration of the Brawler Kit when using ST-style bags and ensures optimal fitment, providing a smooth and hassle-free installation NOTE: Due to interference from water cooling lines, the Brawler Kit does not fit Twin-Cooled touring models. NOTE: For 15-23 Road Glide models, (except 18-22 FLTRXSE CVO Road Glide, 21-23 FLTRXS Road Glide Special and 22-23 FLTRXST Road Glide ST), installation requires new lower fairing support bracketry because the Brawler Kit does not integrate with the original lower fairing support brackets. A singular fairing support bracket is recommended (not included), H-D PART #47200354 and any necessary hardware. NOTE: Front chin spoiler on some models may need to be removed or replaced with an oil cooler cover to install the Brawler Kit. 0506-2366 0506-2364 0506-2365 0506-2367 4 APRIL 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION FOR 18-21 FLSB, 18-24 FXLRS/FXLRST 0802-16341 Smooth, vinyl 0802-16351 Double diamond, black thread 0802-16361 Double diamond, silver thread PART # DESCRIPTION FOR 18-21 FLSB, 18-24 FXLRS/FXLRST (CONT) 0802-16371 Double diamond, red thread 0802-1639 Smooth, solar-reflective leather PERFORMANCE PREDATOR 2-UP SEATS • Features solar-reflective leather in the seating area (unless noted) and automotive-grade vinyl on the sides • Features a 53/ 4” tall driver support • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Includes all mounting hardware 0802-1634 0802-1635 0802-1636 0802-1637 0802-1639 1 Not solar-reflective leather. 5 DRAGSPECIALTIES.COM APRIL 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
MAVERICK DADDY LONG LEGS SEAT • Comfortable seat that retains a custom look • Designed for the taller rider who needs more room to move back while still giving the passenger comfort • Gives the driver an extra 2” of legroom • Special contours give good support while allowing unrestricted movement • Available with HR inlay for an added custom look • Deep 15” W rider and 14” W passenger seating areas • Molded one-piece foam foundation covered with premiumgrade vinyl on a 16-gauge powdercoated steel baseplate • Seat bottom carpeted to protect the fender • Made in the U.S.A. 0801-1877 PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE (14” W FRONT, 13” W REAR) 0801-1877 Black diamond stitch seat w/ HR2 inlay PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE 0801-1879 Diamond stitch seat PART # DESCRIPTION FOR 24 FLHX/FLTRX/FLTRXSTSE, 23-24 FLHXSE/FLTRXSE (CONT) 0801-1881 Smooth seat MAVERICK SEATS • Comfortable seats that retain a custom look • Special contours give good support while allowing unrestricted movement • 15” of rider comfort and 13.75” of passenger comfort • Up Front seat moves you closer to the handlebars; great for shorter riders • Seat with adjustable driver backrest features a 12” x 7” pad • Available with HR inlay for an added custom look • Molded one-piece foam foundation covered with premium-grade vinyl on a 16-gauge powdercoated steel baseplate • Seat bottom carpeted to protect the fender • Made in the U.S.A. 0801-1881 6 APRIL 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
CHROME PART # GLOSS BLACK PART # END RISE WIDTH CENTER WIDTH PULLBACK FOR 24 FLTRX, 23-24 FLTRXSE/FLTRXSTSE 0601-6617 0601-6618 10” 321/2” 3” 41/2” 0601-6619 0601-6620 12” 321/2” 3” 41/2” 0601-6621 0601-6622 14” 321/2” 3” 41/2” 0601-6623 0601-6624 16” 321/2” 3” 41/2” 11/ 4” ONE-PIECE KAGE FIGHTER T-BARS • High-strength steel tubing construction • Crossbars are welded directly to the risers • Accept stock controls • Straight risers available in 10”, 12”, 14” and 16” • 31/ 2” on-center risers • Designed for internal wiring • Made in the U.S.A. PART # DESCRIPTION END RISE CENTER WIDTH WIDTH PULLBACK/SWEEP 0601-6651 High bend 51/2” 5” 31” 20° 0601-6650 Mid bend 4” 44/5” 31” 25° 1” HANDLEBARS • Stainless steel finish with laser-etched Thrashin logo • Fit stock H-D mounts and controls with 1” diameter • Drilled and slotted for internal wiring • Throttle-By-Wire keyholes allow late-style bike fitments (except 23-24 FLHXSE/FLTRXSE, 24 FLHX/FTRX/FLTRXSTSE) • Cable throttle models require TBW handlebar plug (sold separately) • Knurled for maximum clamp grip • Made in the U.S.A. NOTE: Accept H-D OEM heated grips. 0601-6651 0601-6650 PART # DESCRIPTION FOR 18-24 FXLRST/FXBB/FXBBS/FXBR/FXBRS/FXST 0602-1522 6” rise 0602-1521 8” rise 0602-1520 10” rise FASTBACK RISER KITS • CNC machined from billet aluminum • Fits handlebars with 1” center diameter • Available in bronze finish • Stainless hardware and zip ties included • Fits with digital instrument cluster NOTE: Recommend using with solid riser bushings PART #0602-1434. 0602-1520 0601-6617 0601-6624 7 DRAGSPECIALTIES.COM APRIL 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 0610-2349 For 23-24 FLTRXSE/FLHXSE, 24 FLTRXSTSE/FLTRX/FLHX ANTHEM PRO ADJUSTABLE LEVER SET • Unbreakable spring-loaded hinge and folding lever design • Adjustable from stock length to Shorty 1.5” shorter • Micro-Adjuster for precise custom ergonomics • CNC-machined from high quality aluminum • Available in black • Sold in pairs LEVER SET DESCRIPTION FOR 23-24 FLTRXSE/FLHXSE, 24 FLTRXSTSE/FLTRX/FLHX 0610-2344 Anthem, chrome 0610-2345 Anthem, black 0610-2346 Anthem, contrast LEVER SET DESCRIPTION FOR 23-24 FLTRXSE/FLHXSE, 24 FLTRXSTSE/FLTRX/FLHX (CONT) 0610-2341 Journey, chrome 0610-2342 Journey, black ADJUSTABLE LEVER SETS • Easily adjust lever to bar reach for individual riders (limited inward adjustment) • CNC-machined from high-quality aluminum • Sold in pairs 0610-2344 0610-2346 0610-2342 LEVER SET DESCRIPTION FOR 23-24 FLTRXSE/FLHXSE, 24 FLTRXSTSE/FLTRX/FLHX 0610-2347 Chrome LEVER SET DESCRIPTION FOR 23-24 FLTRXSE/FLHXSE, 24 FLTRXSTSE/FLTRX/FLHX (CONT) 0610-2348 Black ANTHEM SHORTY LEVER SETS • 1.5” shorter in length than standard Anthem levers • Easily adjusts for individual rider’s preference (limited inward adjustment) • CNC-machined from high-quality aluminum • Sold in pairs PART # DESCRIPTION 1624-0408 Chrome 1624-0409 Black EXTENDER ARM UPGRADE KIT • Extends Ciro® Frame Mounted Adjustable Highway Peg Mounts (PART #s 1621-0700, 1621-0701) arm length from standard 4” to 51/ 2” • Adds comfort and adjustability • Can also be used as a replacement arm for PART #s 1624-0392 or #1624-0393 (sold separately) • Includes two extension arms and mounting hardware with new bolts and high collar washers • No drilling required 1624-0409 1624-0408 0610-2347 0610-2348 8 APRIL 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 1621-1170 Chrome 1621-1171 Black CHICANE™ PASSENGER FLOORBOARD INSERTS • Easily replace the ordinary inserts with steel-reinforced EPDM rubber components • Long-lasting comfort and durability • Aluminum and EPDM rubber construction • Available in a chrome or black finish • Matches the entire Ciro® Chicane™ product line • Sold in pairs PART # DESCRIPTION 2020-2217 For 22-24 FXLRST, 22 FXRST PERFORMANCE LED FRONT TURN SIGNALS • Aggressively styled signals offer the brightest white running light with fullcontrast amber turn signals • Faceted smoke lens with dark bronze metal housing • Stainless steel fasteners • Direct replacement for OEM • Plug-and-play • Sold in pairs • DOT compliant PART # DESCRIPTION 2040-3250 For 22-24 FXLRST, 22 FXRST LED WINDSHIELD TRIM • Low profile dark bronze finished metal housing • Single row of dual-colour LEDs behind a smoked lens • Bright white DRL shines bright across the lower edge of the windshield • Full contrast customizable amber turn signals • Three selectable built-in turn signal modes: flash solid on, sequential on or sequential off • Plug-and-play easy installation 1621-1171 1621-1170 FOR 06-24 FLHR/FLHTK/FLHTCU/FLTRKSE/FLHTCUTG W/ OEM PASSENGER FLOORBOARD PANS; REPL. OEM #50606-06 9 DRAGSPECIALTIES.COM APRIL 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 2040-3255 For 20-24 FXLRS DRIVING LIGHT BAR MOUNT • Heavy-duty steel mounting bracket attaches to the lower triple tree to secure Custom Dynamics® LED driving light bar part # 2001-2442 or 20402989 (sold separately) • Mounting hardware included • Comes in a textured satin black finish PART # LENGTH RATE N/MM STROKE FOR 90-13 FLHR/FLHT/FLTR 1310-2383 13.307” (+ 0/-0.393”) 26 3.582” 1310-2384 13.307” (+ 0/-0.393”) 28 3.582” FOR 06-13 FLHX 1310-2383 13.307” (+ 0/-0.393”) 26 3.582” 1310-2384 13.307” (+ 0/-0.393”) 28 3.582” STX 36 SHOCKS WITH BLACK SPRINGS • Top level comfort, rideability and performance • Adjustable rebound and compression damping • STX monotube shock with external hose reservoir • High pressure nitrogen gas charged • Precision CNC machined components • Low-friction shaft/seal dead design • Fully serviceable and rebuildable • 1.417” (36 mm) piston diameter • Adjustable preload with billet tool • Length adjustable, 0.393” • Multiple spring rates available to accommodate a wide range of riders • Hard anodized finish • Sold in pairs 1310-2384 PART # DESCRIPTION BLACK 0602-1163 6” tall 0602-1165 8” tall 0602-1167 10” tall RAW 0602-1164 8” tall 0602-1166 10” tall PART # DESCRIPTION BLACK 0602-1157 6” tall 0602-1159 8” tall 0602-1161 10” tall RAW 0602-1156 6” tall 0602-1158 8” tall 0602-1160 10” tall RISER KITS • Made with 6061-T6 aluminum • 1” clamping area • 3 1/ 2” center-to-center riser spacing • Top clamp and hardware included included • Hardware is 3/ 8-16 thread, 1.5” L • Straight or pullback options • Available with a raw or black finish • Made in the U.S.A. 0602-1159 0602-1162 STRAIGHT RISERS PULLBACK RISERS (1.5” PULLBACK) 10 APRIL 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 1620-1131 Chrome 1620-1467 Black SHIFT PEG EXTENSIONS • Extends the stock shift peg out an additional 1.5” • Extension is ribbed to match the OEM look • Pre-installed mounting screw • Sold each • Made in the U.S.A. 1620-1131 1620-1467 FEULING® Feuling® is committed to providing the highest quality performance and replacement engine components with unmatched service and technical support. All of their products are engineered to provide the highest levels of performance and reliabilty for your American V-Twin motorcycle. PART # DESCRIPTION 1012-0269 For Feuling® cylinder breathers PART #0930-0239 CYLINDER HEAD BREATHER REBUILD KIT • Includes two umbrella valves, two filters, two button head screws and four o-rings • Made in the U.S.A. PART # DESCRIPTION FOR ALL 17-24 M-EIGHT MOTORS 0930-0246 0.003” PART # DESCRIPTION FOR ALL 17-24 M-EIGHT MOTORS (CONT) 0930-0247 0.005” PART # DESCRIPTION FOR ALL 17-24 M-EIGHT MOTORS (CONT) 0930-0248 0.0010” ROCKER SHAFT SHIMS • Quiet your engine by tightening the rocker arm to cylinder head end play clearance • Feuling® recommends an ideal side clearance of 0.0035” to 0.005” for optimum rocker arm oil psi and noise reduction • M-Eight cylinder heads also have excessive wear on the rocker arm standoff thrusting surfaces; when the hardened shim is placed on the non thrusting side it will assist in reduction of further wear and damage to cylinder head • Available in 0.003”, 0.005” or 0.0010” thick sizes • Sold as a 24-pack • Made in the U.S.A. NOTE: These shims should be installed by a professional; one who can make correct end play measurements and can install and tighten rocker shaft nuts/bolts without damaging shims. 0930-0247 11 DRAGSPECIALTIES.COM APRIL 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION 0929-0090 +0.843” to 0.8435” oversize PART # DESCRIPTION 0929-0091 +0.8435” to 0.844” oversize RACE SERIES® SOLID LIFTERS • Designed for engines with radical valve spring pressures and large lift camshafts • Maintain proper and critical oil flow to top end with metered oiling • Decrease valve float and maintain maximum valve lift • Optimize valvetrain stability at high engine rpm • Increase horsepower and torque output • CNC-machined and precision-ground from hardened steel • Utilize standard pushrod seat height; Feuling® recommends the use of PART #0928-0010 Race Series® adjustable pushrods (sold separately) • Standard size 0.842” to 0.8425” PART #0929-0024 also available separately; see the 2025 Drag Specialties FatBook • Recommended for both strip and high-performance street engines FOR 17-24 M-EIGHT, 99-17 TWIN CAM, 00-22 XL/XR1200 (EXCEPT RH SPORTSTER), 00-09 BUELL • Sold in a set of four • Made in the U.S.A. NOTE: High volume oil pump recommended. NOTE: Requires removal of rocker covers and rocker arm supports for installation. 0929-0091 PART # DESCRIPTION 0920-0242 For 18-24 Softail MK SERIES CRANKCASE ASSEMBLY FOR M-EIGHT • Gives a solid foundation for building a big-bore engine • Can be paired with a S&S 136” cylinder kit and 45/8” stroker crank (sold separately) • Close-fitting oil scraper is machined, not cast • Stock deck height • Large volume sump • Fit in the stock frame without modifications • Includes crankcase assembly, main bearings, balancer shaft bearings, inner cam bearing, cylinder studs, magnetic drain plug, 1/4” pipe plugs, front and rear piston cooling jets and gaskets, and all necessary hardware, O-rings and seals for assembly • Includes Manufacturers Statement of Origin (MSO) document • Matte black finish • Made in the U.S.A. PART # DESCRIPTION 0950-1040 For 99-17 Twin Cam engines DUAL SPRAY PISTON COOLING JET KIT • Dual Spray technology evenly cools both intake and exhaust sides of pistons • Revised spray locations for more effective cooling • Creates a cooler engine with more power and better durability • Made from billet 6061-T6 aluminum • Anodized in S&S Performance Blue • Shortened nozzle for increased rod clearance • Includes all necessary hardware and gaskets • Made in the U.S.A. 12 APRIL 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PERFORMANCE MACHINE 50 years of fast, and still going strong! Performance Machine is an industry leader in the powersports market. Starting in 1970, the company is a leading manufacturer of custom wheels, brake systems, controls and accessories. True innovators, Performance Machine products will turn your motorcycle into a one-of-a-kind custom statement that reflects your personality. PART # DESCRIPTION EMIS* 1010-3270 For 17-23 FLHR/FLHT/FLHX/FLTR (except 23 FLHXSE/FLTRXSE), 18-24 Softail 3 1010-3271 For 08-16 FLHT/FLHR/FLHX/FLTRX, 09-16 H-D FL Trike, 16-17 Softail, 16-17 FXDLS, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE 3 1010-3272 For 93-06 Big Twin CV carb, 01-17 Big Twin Delphi EFI (except 08-24 FLHR/FLHT/FLHX/FLTR, 16-24 Softail w/ electric throttle) 3 C4 SERIES CARBON FIBER AIR CLEANER • Ground-breaking appearance with weight savings and performance gains • Embodies the essence of racing and modern design • Beautifully sculpted ultra-lightweight carbon fiber shell • Forward-facing reverse cone filter element • Comes with a Black Ops™ finish outer ring • Black Ops features a gloss black finish over a contrasting texture black finish PART # DESCRIPTION EMIS* FOR NATURALLY ASPIRATED MODELS 1020-4238 For 21-24 FLHR/FLHX/FLHT/FLTR 3 1020-4241 For 21-24 Softail 3 1020-4237 For 14-17 Softail 3 FOR MODELS WITH TRASK TORNADO TURBO KIT (2 BAR MAP SENSOR) 1020-42391 For 21-24 FLHR/FLHX/FLHT/FLTR 3 FOR MODELS WITH TRASK TORNADO TURBO KIT (2 BAR MAP SENSOR) (CONT) 1020-42421 For 21-24 Softail 3 FOR MODELS WITH TRASK TORNADO TURBO KIT (3 BAR MAP SENSOR) 1020-4240 For 21-24 FLHR/FLHX/FLHT/FLTR 3 1020-4243 For 21-24 Softail 3 AUTOTUNE ELECTRONIC FUEL INJECTION CONTROL MODULE KITS • Quickly auto-tune fuel curves for front and rear cylinders on a dyno or on-road with new WEGO IIID dual channel wide-band oxygen sensor interface • Robust alpha-N (throttle position and rpm-based) fuel control eliminates problems with long duration/high overlap camshafts • Extended data logging and diagnostics • Data flash memory stores full 60 minutes of operating data at 10 samples/second • Programmable user input for functions such as two-stage rpm limiter, nitrous retard, and shift kill • Programmable user output for functions such as shift light, nitrous activation, and electric shifter • Powerful Windows software for custom programming and data analysis • Billet aluminum housing with black anodized finish • Fully programmable plug-in replacement • Easy plug-in installation • Made in the U.S.A. NOTE: Does not work on models with VVT (variable valve timing). NOTE: Some aftermarket exhaust systems may require modifications or relocation of their O2 sensor port bungs to avoid clearance issues. NOTE: Turbo ECM kits are race only and installation by a qualified technician is suggested. 1020-4241 1020-4240 1010-3270 1 Requires 2 Bar MAP Sensor PART #1020-4221 (sold separately). 13 DRAGSPECIALTIES.COM APRIL 2025 THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
PART # DESCRIPTION EMIS* FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE 1010-3295 Chrome 2 1010-3296 Black wrinkle 2 VO2 ROGUE AIR INTAKE KITS • CNC-machined billet cover secured with race-spec ARP Hardware • High-capacity deep-pleated washable air filter element • Force™ Velocity Stack for a strong increase in power • Available in chrome or black wrinkle finish • Optional rain sock and replacement filters sold separately • Made in the U.S.A. 1010-3295 1010-3296 VO2 RADIANT V AIR INTAKE KITS • Laser-cut Radiant V stamped steel cover • High-capacity, deep pleated washable air filter element • Force™ Velocity Stack for a strong increase in power • Made in the U.S.A. NOTE: CVO/114”/117” models and models with SE stage 1 air cleaners will require support bracket H-D part #16400049 to install. PART # DESCRIPTION EMIS* FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE 1010-3300 Chrome 2 1010-3301 Black ceramic 2 1010-3302 Brushed 2 VO2 CAGE FIGHTER AIR INTAKE KITS • Designed for maximum airflow to the filter element while providing a custom look • Include washable high-capacity filter element • Features laser-cut cage cover, large inlet backing plate and Force™ Velocity Stack • Made in the U.S.A. 1010-3300 1010-3301 1010-3302 1010-3297 1010-3298 1010-3299 PART # DESCRIPTION EMIS* FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE 1010-3297 Chrome 2 1010-3298 Black ceramic 2 1010-3299 Brushed 2 14 APRIL 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
RkJQdWJsaXNoZXIy NDI5NTY=