PART # DESCRIPTION 0929-0090 +0.843” to 0.8435” oversize PART # DESCRIPTION 0929-0091 +0.8435” to 0.844” oversize RACE SERIES® SOLID LIFTERS • Designed for engines with radical valve spring pressures and large lift camshafts • Maintain proper and critical oil flow to top end with metered oiling • Decrease valve float and maintain maximum valve lift • Optimize valvetrain stability at high engine rpm • Increase horsepower and torque output • CNC-machined and precision-ground from hardened steel • Utilize standard pushrod seat height; Feuling® recommends the use of PART #0928-0010 Race Series® adjustable pushrods (sold separately) • Standard size 0.842” to 0.8425” PART #0929-0024 also available separately; see the 2025 Drag Specialties FatBook • Recommended for both strip and high-performance street engines FOR 17-24 M-EIGHT, 99-17 TWIN CAM, 00-22 XL/XR1200 (EXCEPT RH SPORTSTER), 00-09 BUELL • Sold in a set of four • Made in the U.S.A. NOTE: High volume oil pump recommended. NOTE: Requires removal of rocker covers and rocker arm supports for installation. 0929-0091 PART # DESCRIPTION 0920-0242 For 18-24 Softail MK SERIES CRANKCASE ASSEMBLY FOR M-EIGHT • Gives a solid foundation for building a big-bore engine • Can be paired with a S&S 136” cylinder kit and 45/8” stroker crank (sold separately) • Close-fitting oil scraper is machined, not cast • Stock deck height • Large volume sump • Fit in the stock frame without modifications • Includes crankcase assembly, main bearings, balancer shaft bearings, inner cam bearing, cylinder studs, magnetic drain plug, 1/4” pipe plugs, front and rear piston cooling jets and gaskets, and all necessary hardware, O-rings and seals for assembly • Includes Manufacturers Statement of Origin (MSO) document • Matte black finish • Made in the U.S.A. PART # DESCRIPTION 0950-1040 For 99-17 Twin Cam engines DUAL SPRAY PISTON COOLING JET KIT • Dual Spray technology evenly cools both intake and exhaust sides of pistons • Revised spray locations for more effective cooling • Creates a cooler engine with more power and better durability • Made from billet 6061-T6 aluminum • Anodized in S&S Performance Blue • Shortened nozzle for increased rod clearance • Includes all necessary hardware and gaskets • Made in the U.S.A. 12 APRIL 2025 DRAGSPECIALTIES.COM THE DRAG SPECIALTIES DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY, AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S. TERRITORY RESTRICTIONS
RkJQdWJsaXNoZXIy NDI5NTY=